Complete Feelworld LUT6S Walkthrough | Daylight Viewable Field Monitor

No video

Complete Feelworld LUT6S Walkthrough | Daylight Viewable Field Monitor

Рет қаралды 15,951

Күн бұрын

The LUT6S from Feelworld is an affordable, 6-inch on-camera monitor. It's unbelievably bright at 2,600nit and accepts both HDMI and SDI inputs. It's a loop-through monitor that accepts a 4K signal. Be sure to watch the whole video to see the menus, button layout, and design walkthroughs.
// GEAR IN THIS EPISODE //
The monitor in the video bhpho.to/2SmWBQC
The HDMI only version bhpho.to/3nZ2xLg
Monitor/Accessory Battery bhpho.to/3h5KcIT
RED Komodo bhpho.to/3f4RgHe
Friction Arm bhpho.to/3eog0sZ
Top Handle bhpho.to/3tnL8NH
Camera Battery bhpho.to/3164YkP
//TABLE OF CONTENTS //
0:00 Intro
0:44 The LUT Series
1:07 LUT6S Explained
2:22 Exterior Overview
6:33 Menu Structure
14:15 Conclusions
// THINGS TO KNOW //
Let's connect on IG - / garrettsammons
I made these for you - sellfy.com/garr...
The music I use fm.pxf.io/garrett
// #feelworld #lut6s #4kmonitor //
*This video is not sponsored and all opinions are my own. Some of the links listed above are affiliate links that I earn a small percentage from qualifying purchases. Any affiliate links you use helps me create new content and costs nothing extra to you.
My name is Garrett. I am a full-time commercial producer, part-time film professor, and avid whiskey enthusiast living in Metro Detroit. I began on KZfaq to help bridge the technical and financial gap filmmakers face by giving away the same content I talk about in my classrooms. Learn tricks of the trade, discover new gear, stay up with filmmaking trends, dive into how I pull off cinematic looks, and so much more.

Пікірлер: 66

@garrettsammons 3 жыл бұрын

As far as cheap monitors go, Feelworld does a great job putting tons of features in an affordable package.

@_juanchamorro 3 жыл бұрын

this is a brilliant video and even more than I was expecting, thank you. Adding to cart now

@RGMGFitness 3 ай бұрын

After using this 2600nit monitor few a few years now I will never use anything less than 2600nut. It's just so good in bright sunlight! Yes, I know this video is from 2021 but it's still a great monitor in 2024.

@sytesmedia504 2 жыл бұрын

How do you cycle through signal options, example hdmi and sdi

@pirabakarkumarasamy9779 Ай бұрын

Super. thanks

@OfficialDJTazer 3 ай бұрын

What’s the max fps viewable on the screen? Can you load 2 LUTs at the same time, as commonly you’d have Rec. 709 + creative LUT?

@bakerfilms1764 Жыл бұрын

Lut out doesn't seem to work for me... Any reason for this happening?

@itswrongtokillanimalsifyou2837 2 жыл бұрын

I love zoom/overscan for anyone (totally not me) who has a bad habit of stepping in too close and regretting it in post when it's time to fine tune composition.

@RandomMotoThings 2 жыл бұрын

Ahhh…why didn’t you click the anamorphic mode to show us what squeeze options we have? So important lol. Could you give me some info on that? Thanks!

@gscottfuller Жыл бұрын

Very helpful as the instructions in the box are minimal. New to monitors. When I try to preview a clip, I only get a still of the first frame. Is there a way to play back the entire clip on the monitor. My camera monitor play button is not available while monitor is on and the monitor does not seem to have a play button. Thanks!

@CB-qy2zl Жыл бұрын

Less than 1 year with limited use and the HDMI feed thru doesn't work. Who knows if it ever worked as I just started to try and use it. Waiting to here back from customer service.

@benthorn6445 6 ай бұрын

@garrettsammons hey just wondering how to get the SDI signal to the LUT6s monitor. Im plugging in a SDI feed to mine with no result, its saying HDMI no signal in the top right corner, should it auto detect or do i need to switch it to SDI somehow? Cheers

@garrettsammons 6 ай бұрын

In the settings you should be able to switch inputs from HDMI to SDI

@come2idlewild Жыл бұрын

What about the recording aspect of the monitor ? The length & quality & fps. Thanks…

@grzegorzwaszczuk 10 ай бұрын

Is there a way to take a photo of what camera is seeing and save it to an SD card and/or a screenshot of the monitor?

@afonsocovas9996 Жыл бұрын

Can we change camera settings (isso,shutter...) in the monitor??

@garrettsammons Жыл бұрын

Not with this monitor, unfortunately. For something like camera control I’d suggest checking out some of portkeys monitors.

@chariesbergero9662 3 жыл бұрын

I have some problems. When I do a pan from left to right or viceversa I see a like a bad compression In the image, like little drips. Then when I connect my camera by SDI in 4 k the monitor can not show the image. When I connect my camera by HDMI the monitor show me the video with any problem. Could some one here confirm this? Thanks

@moonshipcreative8908 3 жыл бұрын

Great video as always Garrett! One question, is it possible to change the output resolution? I'm thinking of using this with the Hollyland 400S, which only accepts a 1080 signal.

@jamesseward9263 2 жыл бұрын

Great presentation! Thank you! 💕 so I assume your media is recorded to the internal cards in the camera? Does to apply any of the Luts to your Video? Or does it just show you a preview of what your output might be after processing on the computer and applying the Luts in post? Thanks 😊

@garrettsammons 2 жыл бұрын

You can load luts in for previewing, but definitely recording in camera. Nothing is applied to the video.

@geartools5146 8 ай бұрын

Love this monitor, but the mount is so flimsy

@CapturaVideo Жыл бұрын

It looks to me like it has arri locking pin locators for the 1/4 mounts. Can you confirm that? If so, that's actually a pretty big deal when it comes to mounting. Thanks

@TheCoxwellTeam Жыл бұрын

Hi Garrett... Great Video! Thank You. I and a Realtor and have an iphone 14 pro max. Would the LUT6 be overkill for using it as a monitor to photograph homes and possibly video homes. I would only be using it as a field monitor/display for my iphone? Or, is there a screen you would recommend for that? Thanks for you input.

@OfficialDJTazer 3 ай бұрын

Your display is currently 6.69 inches; I see no necessity for this monitor for you, especially with the iPhone 14 Pro Max not supporting Log footage.

@thej.ustory-moviecomingsoo3878 Жыл бұрын

Excellent

@ustinpower 3 жыл бұрын

Thank you for sharing this monitor! One more question, can I ask which camera and lens you used to film this video? I feel the quality is soooooo great. Thank you so much

@garrettsammons 3 жыл бұрын

Thanks dude! The setup I use for this is a GH5S, Metabones speed booster XL, and a Canon 16-35 L II f/2.8. I think the focal length is set somewhere around 20mm.

@fredventure 2 жыл бұрын

Thanks for the video good review! Where would you place the Feelworld LUT7S?

@garrettsammons 2 жыл бұрын

If you need a large field monitor, the 7S has all the same benefits but the bigger screen. It would just be personal preference I think.

@lyCanzz__ 3 жыл бұрын

Hey I'm new to camera stuff..!! I wanted to ask that can we use this monitor for self portrait photoshoot with a7iii or Is it only for video purposes..??

@j.merkerproductions 2 жыл бұрын

is 6" enough for manual focus on moving subjects (with a fast lens)?

@naps1saps 2 жыл бұрын

If you're remote off camera, get a bigger monitor. On camera 7" was good enough for me but seemed too big sometimes unless you have a big rig. 6" should be ok if you're a one man show.

@thanosbikos Жыл бұрын

Thank you for this detailed review! Every feature explained thoroughly. I've been trying for a couple of weeks to find which monitor can print LUTs to the output. Almost no review mentions it. And it's an important feature if you want to record flat and stream live with a standard rec709 profile. So just to make sure, can the LUT be applied to any of the outputs? Both HDMI and SDI? Thanks!

@MultiKiller22 Жыл бұрын

I'm having trouble sending out the lut via HDMI

@RadianFilms64 3 жыл бұрын

Can you use the HDMI in and output through the SDI or the other way around? Or you have to stick with HDMI or SDI? Thanks!

@jaoandrianjohary3136 2 жыл бұрын

Asking the same question here! I wonder if you found the answer. Thanks!

@garrettsammons 2 жыл бұрын

I don’t believe this is cross compatible. If memory serves, you have to choose one signal or the other.

@philpritchard8772 2 жыл бұрын

better than a shinobi?

@BurninSven1 2 жыл бұрын

What would be very useful is if the lut was looped through to the HDMI output which I took for granted but it´s not. I was planning to use it for my three BMPCC and my Atem mini to get a rec 709 feed out of the Atem mini but no luck it wont work. To bad cause I got a ton of old vintage lenses for my pocket cams that I wanted to see what they would look ljke in a livestream. I´ll probably take it back to the store

@bradleykussy 2 жыл бұрын

I also have the Komodo and I also bought this monitor but I cannot change the source from HDMI to SDI in the menus.....

@garrettsammons 2 жыл бұрын

Really? That’s so odd. I’ll have to take a look tomorrow and switch between them.

@braydenjones4505 2 жыл бұрын

Mine developed a green tinge around the border of the screen. Have you had a similar experience?

@garrettsammons Жыл бұрын

I haven't noticed that yet... I still use this one as the reference monitor for every youtube video too.

@storageunit2683 2 жыл бұрын

Does yours gets really hot? Mine does. Not sure if that's normal or not

@garrettsammons 2 жыл бұрын

It absolutely warms right up. I wouldn’t say hot to the point of hurting or burning someone, but definitely gets warm.

@storageunit2683 2 жыл бұрын

@@garrettsammons ahhhh I thought it was just mine. I do smell the screen when it gets hot. But idk. I left it running for a good 20 mins?

@Karlabacken Жыл бұрын

I have a question regarding using this with the RED Komodo. The Komodo outputs up to 12G SDI (4K) but this monitor only inputs 3G SDI (1080). Will it still work with the Komodo? The monitor only displays 1920 x 1080 anyway so I guess 4K 12G is not any use anyway. Or am I wrong?

@garrettsammons Жыл бұрын

You’re right. It’ll work just fine with this monitor. The Komodo should automatically adjust its output settings to match, but if it doesn’t, there’s menu settings to down res output to 1080p

@Karlabacken Жыл бұрын

Great thanks for the answer. And this has nothing to do with what resolution you record in camera right? I mean if I shoot in 6K on the Komodo. It has nothing to do with the output SDI being 3G or 12G?

@garrettsammons Жыл бұрын

That’s right! Internal recording and external viewing are completely different

@bradleykussy 2 жыл бұрын

I also have the same Komodo and Lut6s and my display looks different. Mind sharing your sdi settings?

@garrettsammons 2 жыл бұрын

There may have been a firmware update that’s modified the UI since i made this.

@bradleykussy 2 жыл бұрын

@@garrettsammons interesting. Can you message me and possible show what yours looks like after the update?

@fos8524 2 жыл бұрын

Hi. Can you shoot 120fps with it?

@weareselfmade5888 2 жыл бұрын

bruh

@MegaShowmaster 10 ай бұрын

👍

@NikHem343 3 ай бұрын

I'm fairly disappointed with the monitor. I feel like I had to fiddle around with the colors and brightness / contrast a lot until it more closely resembled what I see on my FX6 monitor and even still it's not that accurate. My biggest gripe, though, is that highlights will literally burn away on this monitor while I can still see them on my FX6 monitor. Really don't know if I'm using this thing wrong or if something is up with my unit or that's just how cheap monitors are.

@garrettsammons 3 ай бұрын

If you are using preview luts in monitor, those are displayed in 8-bit so it’s definitely a crunchy image. This is true with most production monitors until you get to the more industry standard stuff

@NikHem343 3 ай бұрын

@@garrettsammons Thanks for your answer! I've got the LUTs installed in-camera, so the monitor gets the 1:1 feed from my FX6. I supposed this is the "cleanest" process, am I mistaken?

@WAR_in-Ukraine 2 ай бұрын

The same. It was not possible to manually calibrate the color. Preset 6500 is too warm and green. 9300 is more normal, but I would like to make it slightly warmer, which is impossible. In general, I decided that it was just a bright monitor that should not be trusted.