*TOOLS & SUPPLIES & DONATION LINKS* Flat Oven Igniter- amzn.to/3DuBsYv Round Oven Igniter- amzn.to/3IXVADt 1/4" Wrench- amzn.to/3K753cL Wire Strippers/Crimpers- amzn.to/36E4Orn Tool Set- amzn.to/3epVN4X Safety Glasses- amzn.to/2ez41Jw Magnetic Work Light- amzn.to/33tk6tp *If you Enjoy the Channel Consider Helping Support it by Donating below & by Subscribing.* *PAYPAL DONATION* www.paypal.me/JonnyDIY *Zelle Donation* JonnyDIYs@gmail.com *Venmo Donation* JonnyDIYs@gmail.com

You're a natural teacher and have helped me a great deal to fix my old oven. Thank you for your excellent visual and verbal instructions.

Very clear, very well organized. Somebody else said you were a natural teacher, I second that.

I can’t tell you how grateful I am to this video you saved a single girl hundreds of dollars me and my uncle did this with your KZfaq video and the part was $69. Super grateful!!

Jonny...Couple helping comments for Whirlpool. Hardest part was running igniter cable through insulation to connection on the back of the range. There's a small plate that covers the gas orifice inside the oven. Remove the one screw and plate. Don't remove defective cable and igniter at first so you can use it to help run new cable through. ALSO, shine your flashlight where cable enters insulation inside the oven. Then you can clearly see where the cable goes as you look from the back of the range! So simple but a massive help in fishing new igniter cable through insulation to connection on the back of the range. People online complain about how confusing it can be getting the new cable to the connection.

So interesting to watch you fix the connector wire. Thanks for some of the helpful info for a mom & daughter trying to troubleshoot why the pilot on our stove isn’t working.

VERY THOROUGH and easy to follow tutorial...I'm 99.9% certain that I've got a bad igniter, and that's what's causing the oven to NOT fire up! TomorrowI turn 71 years old and I've ALWAYS loved taking broken things apart and fixing them... so tomorrow, I'll ride down to where my Dad RIP, bought the Frigidaire oven back in 2013, and with OLD igniter in hand, buy a NEW one, install it and if the stars are in alignment, I might ACTUALLY hear a, "GOOD JOB GARY!" from my dear wife! (I WON'T however, bet my pristine Muststang GT on that utterance occuring!) Thanks again Jonny DIY for the great video!

watched your video and then did it myself and it worked! even had to splice the wires, but was able to do so after watching you. thanks so much!

Thank you so much. Your video helped me replace igniter in my oven. It only took 10 minutes!!

Thank you for this informative video. I have about two yeas of tinkering with washers and dryers, but I haven't worked on ranges at all. I'm preparing to do a similar job, so I wanted to get eyes on the disassembly and part replacement. I really appreciate your attention to detail. If I may, I'd like to point out that the igniter fails not because it doesn't get hot enough, but because it goes out of spec. As the igniter heats up, its resistance drops, thus it's amperage increases. In order to heat the bimetal in the gas valve it needs to reach a certain current (3.3 amps in valves that I have seen) in order to flex the gas valve bimetal which opens the gas valve. Just a little tidbit I thought I would pass on. So, you can see an igniter glowing and not lighting because its resistance hasn't decreased enough for the current to reach the specified amperage. That being said, I want to thank you for showing me how to execute this operation!

You’re a life saver. Thank you for this video. You just saved me a couple hundred of dollars!!!

Great video. You quickly and accurately identified and described the problem. You did the same with the fix! I'm now a subscriber and plan to watch all of your videos. Really great job. Thanks for taking the time!

Just repaired our gas range with this video, almost identical igniter! Thank you so much for putting this together. The hardest part was getting out those two bolts holding the old igniter in 😂

Wow that was very clear instructions!! I don’t know if I could actually fix it myself but your demonstration was so organized & easy to follow!

Great video as always. A little tip for those two wires coming off the ignitor. Some heat shrink tubing will add extra protection against those sharp edges. Thanks and have a wonderful weekend.

Great video!👍🏼 Thank you.

thanks for your video! we were able to narrow down our issue to the oven igniter and replace it. your video had some great tips to help us along!

You’re a genius and I am overwhelmed!!!

Great video! I watched it even though my oven is electric. Liked the inside the oven camera angle for re-attaching the flame tube at 4:58

Great video. Thank you for going straight to the issue at hand. Truth!!!!

Thanks for sharing a money saving project!!! Peace and love to you and yours ✊🏾

Okay. That was amazingly helpful, including the "uh-ohs" that absolutely will happen to me when I do this. 👍 and subscribed, hoping your other vids are this easy to follow. Thanks.

Thanks for giving me the confidence to fix my own oven!

Awesome instructor.. Now I can fix my oven..Thank You🥧

TY! This helped me understand and visualize the basics, and while my oven was much different, I still easily completed the repair. $30 and an hour or so ✅ --Appreciate you making and sharing this :)

Thank you! Links worked like a charm too.

Thank you so much ! You saved me a $500 repair bill

Man, great video. Only recommendation I may add is get new ignitor before you start. So much info. Thanks

Very helpful Thanks John

Totally worked for me, had this exact problem in my 790 Kenmore! Thanks so much for posting, very simple fix. I do want to double down on how fragile the heating element is, don't touch the coil part at all if you can help it. Better ones have a shield to keep it safe.

Awesomely done. Thanks

Very helpful, thank you!

Good vid, I used these tips to complete job myself.

Thank you so much!!! Your video was just what I needed!!! Subscribed!!!

Great video keep up the good work special part where you access the wires by pulling out the bottom drawer on mine is a warmer drawer I was stressing out pulling out a whole lot of stuff thanks

Best video on YT

interesting video, glad you explaining how to do this. As a woman glad i can follow.

Good, quick and slick😊

Wooo ...Thank you for this video mine just went out and I need to do this today

Great video man thank you

VERY GOOD INFORMATION 👍 👏

Thank you.

That was great! Thanks

Thank you. This was very helpful. I did it😊

Great video. Thanks for making this

thank you

Thanks man.😊

Thank you 🙏🏼

Thankyou u taught this gramma new trick

So cute 🤧 thank you!!

Great video

6:28 I could see why you said glow plug because the pilot light basically acts similar to a glow plug in a diesel engine.

Big Help Thanks :)

Thank you Jonny! This is my problem! You made this problem easier for me!

You r so good.... Many thx Johnny b good....

Thank u

LOL... 😅😅😅 Just for the jump into camera view at the beginning I am liking your video... LOL....😂😂😂😂😂

Easy fix ,. Right ,. Right ,.🧐

he is back woooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo

Thank you. Excellent. Really helped. But my Whirlpool is so dang heavy I can't budge it so I may have to get a REAL man to fix! Its definitely a broken flat style glow igniter. Not coming on at all.

👌

nice job on the video... very helpful

My oven DeLonghi is not heating and the oven light is not working, but the cook top is working fine. Maybe it has the same problem as yours? Great tutorial, I’ll see if I can fix it. Thank you.

Thanx great explanation! Quick question ( If the ignitor doesn't glow will it prevent the gas to be released ?? ) Thanx I hope you can help me with that !

Love your video. Question can i use a flat/square igniter if my oven came with a round one

One thing I would add is that if you're working on a Samsung Gas oven( NX58H5650W , NX58H5600S, OR NX58J5600S ) They are very easy to access if you just want to steel wool, sand or scrape the oxidation off, instead of buying a new one, BE VERY GENTLE, THE IGNITER (GLO-PLUG) IS VERY BRITTLE. Ask me how I know.

am I good to use the stove top burners while waiting for part after disassembling to get the bad oven igniter out?

Hi, can you do the same for a newworld oven? My oven has the same issue.

What screws do i take out to expose the wires in the back? I see a bunch of screws to take off the back plate

Wry east video for a woman to follow thank you ❤

Great video. I see that that ignitor lights the flames next to it and then the rest of the flames are lit in a domino effect. We have an issue where we started to smell gas *only* when the oven was on ( we stopped using oven after noticing this ). I’m wondering if it is possible for some of those gas outlets on the bottom of the oven to be clogged so badly that most of the flames light, but a clogs keep some flames from lighting which means that nothing lights the gas outlets next to it, so gas is released without burning. In other words, if the are 10 holes next to each other with gas coming out of them, and the gas is ignited at holes 1-7, but 8 and 9 are clogged, then gas will be coming out hole 10 without igniting. Thanks

Hi Johnny. I realize it's Easter weekend and you're likely busy doing easter-like things but...., but I guess I should give you a heads up on a few things...,A: I am a 62 year old grammy who has "0" knowledge or experience repairing anything electrical but B: I truly can't afford to hire an appliance guy to come out so it's all on me. Now having just watched your (absolutely fantastic!) video on replacing an oven ignitor I'm thinking "hey, I can do that" and so here I go but..., I have a few questions and may have more as this repair moves forward. Ok so I'm working on a Kenmore gas range, model #790.7851 on which the oven may or may not heat. Meaning over the last 6 months it has heated up a few times but the last attempt I'd turned it on but after waiting about an hour for it to heat I just turned it off. The time before that it had heated but took about half an hour to heat and then if I changed the temperature (up or down) it would go down to it's lowest heat and would not budge from that temperature. I'm merely guessing that it's the ignitor AND like I said, after watching your vid I think I can do this. 👉🏽👉🏽🤷🏽‍♀Can I get the ignitor at Home Depot? (Ignitor, oven burner part #316428500, taken from the parts repair list for this oven)..., and "Shoot!" I've forgotten what my other "?" were. Lucky you, guess you're off the hook for now😉😉 BTW I swear I'm not some crazy just hoping to mess with you, I am who I say I am (for better or worse).If for whatever reason you can't help (any further than your great video) that's totally copasetic. I'll figure it out, may take awhile longer but eventually I'll get there. Sorry for the REaLLy lOnG comment, it's a grandmother thing having far too many words✌🏽👋🏽

Great video, I changed my igniter and it glows but the I’ve won’t light. I only get the gas smell. I turned the oven off due to the strong gas smell. The oven bar never lights up. Can you help me with this issue?

Just a quick question so does the igniter stay on when the oven has lit it stays on the whole time or just to light it and then goes off or it stays on can you confirm thanks

Were you get those white top things that covered the wire

New Igniter works now but still no flame after waiting for over a minute. Ever seen that before?

Good video but what if the ignitor starts the burner and then after 3 seconds it goes off ??? I already replaced the gas safety valve any ideas 💡 thanks

Jonny i have a samsung less than 5yrs old, From time to time we smell some gas from the oven and it does not or should say it takes forever to come up to the preheat temp. What do you think this issue would be?

hi! my oven doesn't preheat occasionally. often it works fine, but sometimes it sits at the base temp (150 degrees) for like an hour or two before heating up. the igniter seems to be glowing even when this happens. I just removed all the covers so I can see what is happening more clearly, but it hasn't had the issue today yet. any thoughts? can an igniter be faulty sometimes, but not others, does this seem to most likely be the problem? thank you so much

Great video. What do you do if your pilot light will light, but not the oven will not kick out any gas from that long central burner? Thanks!

We have a thor kitchen range. We replaced the double safety valve, and the broiler now works, but, bake does not work... we have ordered the replacement igniter...to test the bake, wouldn't the flame tube light up with a torch, even if the igniter does not?

All but a few jets all in a group toward back of oven emit a flame. How to fix/clean these?

This eight minute video just save me hundreds of dollars 👏🏿

Tired of replacing these igniters seems they only last a month

Does the oven igniter stay lit the whole time you’re baking?

Will this help if you have a f-10 error message?

My oven pilot light is on but won’t heat up just warm

Hello in the title you said won’t heat and the pic thumbnail showing it on and in the video you saying it doesn’t turn on because the yellow cable was broken . It’s little confusing but my issue is my over it’s a kenmore it does turn on but it’s keep turning on and off and the flame not big like it used to be and the top one doesn’t turn on while in baking mode it turn on only in Broil mode please help I can’t afford new one I have to fix this one it’s only 6 years

What if i replace my heating element and it still wont get hot. Wont come on at all. Stove top and broiler work, just not the oven?

Hello Jonny, any chance for us to work together to review and install our 4K security camera system? I had emailed you the details of the proposal, hope can get your feedback and move forward! Thanks.

My oven keeps beeping F2 and shuts off. What does that? Sears replaced the ignitor. That didn't work. We replaced the thermostat. That didn't work. They said it could be the board.

It keeps burning out after the 1st time we does it keep going out

What happen to those that doesn't know what to do. It looks easy, but is it really that simple and easy?😮😕

Is the ignitor supposed to stay on after the flame is lit?

My igniter is on but the stove isn't letting out Gas it does it every once in a blue moon when u turn the temperature to 400

Okay so what if my element lights, but it still won't ignite? I don't smell gas either

So my stovetop and broiler work but oven doesn't why is that. Igniter still?

Hi there. Have a GE Profile XL 44 that often i cannot get to heat much past 375/400. Ignitor goes on, burner burns blue. I noticed that when it gets to that high 300s low 400s range, the blue flame actually will at ties flicker or get smaller. Any tips?

My kenmore igniter is glowing but the gas wont come on.

Yep....will not work with regular bleach. I'm off to the hardware store for the advised bleach