GAS STOVE BURNERS BURNING LOW? FIX IT YOURSELF How to Fix Low Flame on Gas Stove

Рет қаралды 132,133

4 жыл бұрын

GAS STOVE BURNERS BURNING LOW? FIX IT YOURSELF How to Fix Low Flame on Gas Stove
Support channel with PAYPAL donation: youtubeInfluencer@outlook.com
BUY HC-V380K Full HD Camcorder HERE! Amazon Link: amzn.to/2Q74b0n
Panasonic HC-W580K Full HD Camcorder HERE! Amazon Link: amzn.to/2Ls0wFS
Buy GoPro HERE! Amazon Item link: amzn.to/2X3Lzgi
Buy Panasonic 4K Camera HERE! Amazon Link: amzn.to/2PzmydT
Buy Power Director Pro HERE! Amazon Link: amzn.to/2ZFv5jt
Buy Viltrox Lighting HERE! Amazon Link: amzn.to/2MW1FpH
Store Link: www.amazon.com/shop/learningc... NEW LINK BELOW FOR 2022
Support channel with PAYPAL donation: youtubeInfluencer@outlook.com
BUY COMAN KX3636 Tripod HERE! Amazon Link: amzn.to/3dIAv64
BUY Panasonic HC-X1500 4K Camcorder HERE! Amazon Link: amzn.to/3QCUy4f
BUY HC-V180K Full HD Camcorder HERE! Amazon Link: amzn.to/3ewA7nP
GoPro HERO10 Black HERE! Amazon Item link: amzn.to/3Cedq55
Buy Panasonic 4K Camcorder HC-WXF991K HERE! Amazon Link: amzn.to/3PuXL4n
CyberLink PowerDirector 20 HERE! Amazon Link: amzn.to/3dELRrq
BUY Sony FDRAX53/B 4K Camcorder HERE! Amazon Link: amzn.to/3AukDNh
Buy Viltrox Lighting HERE! Amazon Link: amzn.to/2MW1FpH
Buy Sony Cyber‑Shot RX10 IV HERE! Amazon Link: amzn.to/3QEsJZy
Buy Sennheiser MKE 400 Shotgun Microphone HERE! Amazon Link: amzn.to/3c3jrqE
Store Link: www.amazon.com/shop/learningc...

Пікірлер: 53

@moreorless99 27 күн бұрын

It worked! My burner lights immediately and the flame has returned to the original height.

@brianmidmore2221 2 жыл бұрын

Excellent . I did what you said and solved the problem.

@rosafranco4665 3 жыл бұрын

Working perfectly. Thanks

@jasonmurray9629 Жыл бұрын

Thanks for this. Worked great.

@prasannaravindranath6618 2 жыл бұрын

Wonderful, it worked for me. Appreciated

@benadam7753 2 жыл бұрын

Worked like a charm! Thank you!

@LEARNINGCHORDS 2 жыл бұрын

You're welcome!

@janc6281 3 жыл бұрын

Fixed my problem. Thank you!

@LEARNINGCHORDS 3 жыл бұрын

You're welcome!

@jfarinacci0329 3 жыл бұрын

good content. good camera work. thank you.

@LEARNINGCHORDS 3 жыл бұрын

Much appreciated!

@SHANGELism 2 жыл бұрын

Thank you I really really appreciate this video

@LEARNINGCHORDS 2 жыл бұрын

Glad it was helpful!

@givim80 5 ай бұрын

I found your opening speech is very entertaining.. thanks for sharing the same info again 😂

@LEARNINGCHORDS 5 ай бұрын

thank u 80 :)

@radhikagupta8725 3 жыл бұрын

It worked for us.. thanks

@LEARNINGCHORDS 3 жыл бұрын

You're welcome!

@everettehairston6356 Жыл бұрын

Big help

@johnbiz1020 3 жыл бұрын

Thank you so much I worked for me tho👏👏👏

@LEARNINGCHORDS 3 жыл бұрын

No problem 😊

@sunilnarayanappa 3 жыл бұрын

Thanks. This helped to fix the problem I had.

@scooter6334 Жыл бұрын

There’s a brass orifice in the bottom of that center hole and they make orifice cleaning wire rods that will clean that up they get food particles and different things in them that’ll bring your gas volume back up :-)

@looksgoodfrommyhouse9227 Жыл бұрын

That’s what she said 😊

@LEARNINGCHORDS Жыл бұрын

yep!

@johnsaunders4577 8 ай бұрын

Nice. Fire 🔥🔥

@MrVipulLal 2 жыл бұрын

Goo video. Thanks

@LEARNINGCHORDS 2 жыл бұрын

Thank you too

@notcharles 3 жыл бұрын

"try to remove any debbrios that is in the hole" 4:58 He is scrubbing the (removable) jet/gas orifice. 'Any debris' he might remove is likely to fall down (gravity, don't ya know) into the gas line. Better to remove each jet/orifice, clean them thorougly and repece them. Reminding us all that - just because you watched someone do it on KZfaq does not mean it is the RIGHT way to approach or perform the task.

@LEARNINGCHORDS 3 жыл бұрын

correct

@kritirajput9971 2 жыл бұрын

Thanks ! It really helped me 🙏

@everlynemaranga 3 жыл бұрын

Thank you very much, it worked!!!!

@LEARNINGCHORDS 3 жыл бұрын

Glad it helped

@Rtomorrow28 8 ай бұрын

How about when the flame is too strong? Sounds like a torch….

@rolandcantu8752 2 жыл бұрын

Yes I got a stove and it come on real the fire what can I do to come on a little hight

@ruthokalebo591 Ай бұрын

Mine brings a lot of fire even when you turn it on slowly

@vister6757 Жыл бұрын

Mine was the hole that let the gas out was clogged. I use a toothpick and it works but let you said toothpick is not going to be a good choice. I will try to use a metal rod next time.

@dmariewalker6880 6 ай бұрын

Was you smelling any gas before you cleaned it?

@leshsl4482 9 ай бұрын

👍

@chrbx13 6 ай бұрын

How can we remove the sikver part surrounding the gas hole to clea it as mine has grease

@LEARNINGCHORDS 6 ай бұрын

be careful... you don't want the place to blow up...

@dmariewalker6880 6 ай бұрын

Mine is like yours, it clicks and the flame lights, but with the burner off, I’ve been smelling gas leaking, what would cause that? I called the gas company and the guy said it was ok, no he didn’t check the burners, so I bought a gas leak detection thing and tested that burner 3 times, 4 red lights and alarm went off. The other burners are ok.

@LEARNINGCHORDS 6 ай бұрын

CALL THE GAS COMPANY AGAIN... they have to come inside and check and also have a tester to show if it detects GAS!!!

@johneagle7842 3 жыл бұрын

what was at or near the end of the video,sounded slow motion, then it sounded like a big monster dragging something growling all the way, almost like the one i recorded.

@dmariewalker6880 6 ай бұрын

He’s just using slow motion to finish recording, I accidentally did that & it freaked me out! 😂

@CH-yt6qi 4 ай бұрын

It appears my gas stove head is one piece and I cannot remove the cap like you do. Any suggestions?

@LEARNINGCHORDS 4 ай бұрын

don't mess with it if you are not a pro... gas stoves blow up

@gardenstateflatlandb Жыл бұрын

My right front burner won't light. Clicks and sparks, but won't light. Won't even light when I put a flame to it with a long grill lighter. All others work fine, and will also light when hit with an external flame from the grill lighter. My burners do not have that brass jet, just an approximately 1/2" tube that the gas comes up from beneath the stove top. Also, my spreader piece does not have a small pin hole like most others I've seen in other videos and online repair forums. Spreader looks close to the one in this video. The gas collects under the cap and finds it's way to the spark igniter thru the slots on the spreader. Hopefully I'm making sense...? Any idea of what I should do to troubleshoot this? All other burners, if I remove the cap and just turn to full (without lighting) I can physically feel gas coming up from the ports. On the right front, I feel nothing. Barely even a smell of gas. I smell it, but not strong like the others. You seem to know what you're doing, so hopefully you can help shed some light for me. Any help would be greatly appreciated.

@LEARNINGCHORDS Жыл бұрын

ADVICE? GET HELP.. a GAS stove is not something to play with.. you could easily blow your house up.. MOST Local GAS companies will come into the house and look at a GAS appliance and try to light a pilot light.. they might even offer to fix it for a price.. if not, hire a repair person -- it might be a bad burner or the stove might need to be replaced.. I think paying $100 for help in person is worth it - dont let anything blow up in your face or destroy your house.. don't mess with gas if you do not know what you are doing

@gardenstateflatlandb Жыл бұрын

@@LEARNINGCHORDS Fixed it immediately after posting my question. Gas jet on mine is built right into the knob/valve. The venturi pipe that slides over that came dislodged, probably when I moved the range to clean behind and on side of it. Just slid the venturi back into place and secured it so it wouldn't move again. I'm not stupid enough to blow up my house. If I feel something is out of my grasp, I ask for help, or do tons of research instead of just being dumb and hacking away. This is especially true when it invloves gas or electrical wiring. This was an easy fix, luckily. Also secured the loose control board while I had things apart. Used to push buttons for oven controls, and the board felt like it was going to fall out. Clips just got bent out of shape. Good as new now. Thanks. And thanks for telling people to be careful. Yeah, I've seen some hacks at work messing with stuff they shouldn't be messing with, and seen bad things happen because of it. I installed this range in 2007 and haven't blown anything up yet. Lol