Gaslands Gates - Deathrace Wasteland Terrain

No video

Gaslands Gates - Deathrace Wasteland Terrain

Рет қаралды 4,458

Күн бұрын

I finally finished my gates for our Gaslands Deathrace games. I stuck with the wasteland theme so they'll fit in with the rest of my wasteland terrain. I used a bunch of old techniques and same new ones. A lot of these will carry over into other war games as well.
Corrugated Steel: • Corrugated Steel for M...
Oil Barrels: • Terrain Barrels - Gasl...
Tire from Nerf Darts: • Tire Pile Barriers - W...
Trashed Cars: • Gaslands Terrain - Des...
----------------------------------------------------------------------------------------------------------
Support the channel!
---------------------------------------------------------------------------------------------------------
Get some sweet merch:
teespring.com/...
Buy me a coffee:
www.buymeacoff...
-----------------------------------------------------------------------------------------
For more tabletop gaming related content from D&D, Pathfinder, Starfinder, Call of Cthulhu, Beginner RPG tutorials, Terrain Crafting, Miniatures, Mini painting, Savage Worlds, Model building, Module reviews, Homebrew, Warhammer 40K, Gundams, Cyberpunk, etc.. check out the Tabletop Dungeoneers YT and Discord, feel free to join in the conversation:
/ @tabletopdungeoneers
/ discord
#m3verse #tabletopdungeoneers #gaslands

Пікірлер: 76

@scotteverroad4545 2 ай бұрын

! added LEDS to my STARTS and FINISH,...and lottsa Skulls! Cheers Buddy!!!

@m3verse 2 ай бұрын

Yeah I've used LEDs in that past for other things. I've noticed the batteries tend to die between playing and I'm terrible with replacing them so just don't do them much anymore. I bet yours look great, feel free to tag me on IG or FB so I can take a look.

@rideyoride 2 жыл бұрын

Oh, I just learned something new! The way you used your pallet to hold the glue as you dip the pieces into it as needed!!

@m3verse 2 жыл бұрын

Glad I could help. Thanks for watching and happy crafting!

@JERRYR708 2 жыл бұрын

Finally finished my gates. No bullet holes were added to my START gate. Most of the action happens at the later gates and Finish gate where most of the bullets wind up. I had to sand flat on one side of my yellow blade knife to keep it from wobbling while cutting thin masking tape strips. great idea btw.

@anuntakenname 3 жыл бұрын

Oh. Oh, good. Just finished building my race gates, and then I see this video with way better techniques to make way better gates. Now I've gotta make a whole new set. Great.

@m3verse 3 жыл бұрын

Roflmao..,.Ain't that just the way it always goes? I've got some other plans in the works, with different themes, maybe some miazaki themed terrain. There's always room for more! Thanks for the kind words and happy crafting!

@brynjolfr 3 жыл бұрын

And now me too :)

@AlanVonGoodleef 22 күн бұрын

Awesome. That looks like my cutting mat. Haha

@m3verse 6 күн бұрын

Haha, there are many like it, but this one is mine.

@revohirst 3 жыл бұрын

They look great! Good video, I think I will attempt some of my own now.

@m3verse 3 жыл бұрын

Thanks man. Go for it!

@Zeros_Hobbies 3 жыл бұрын

The salt trick is my go to for the biger kits i have , nice work brotha.

@m3verse 3 жыл бұрын

Right on. I've seen some folks do some sick weathering with it, just getting my feet wet. I'll be doing more of it in the future.

@lartus8027 2 жыл бұрын

Paint job, all the weathering, little touches like the chains and posters really bring it together. Great job!.

@m3verse 2 жыл бұрын

Thank you! I'm glad you enjoyed it.

@j453 3 жыл бұрын

I put forward the argument that you know which way to go through the gate because one side says gate, and the other does not. 😉 That said, the gates look amazing 👍👍

@m3verse 3 жыл бұрын

Hmmm... well, I did paint both sides of the gate signs... I suppose I could have saved a bunch of time painting the arrows if I hadn't... Thanks for the compliment, and thanks for watching!

@j453 3 жыл бұрын

@@m3verse thanks for the vid! Didn't realize there was writing on both sides lol

@aaronglaab6304 3 жыл бұрын

Loving your videos lately!!! I was just at target and picked up a pack of darts on clearance for 3.49! Tires for days! These gates look great. It’s on my to do list now . Keep up the fantastic work

@m3verse 3 жыл бұрын

Nice score on the darts. I'm glad you're enjoying the videos. Feel free to head over to the FB page and post your work.

@ProfessorCharlesPorterfield 3 жыл бұрын

It looks great man!

@m3verse 3 жыл бұрын

Thanks!

@jordanphilip5160 3 жыл бұрын

These turned out awesome.

@m3verse 3 жыл бұрын

Thank you! I'm glad you like them.

@diecast_MikeEspo 3 жыл бұрын

Awesome , looks cool. Cool video .

@m3verse 3 жыл бұрын

Thanks Mike, and thanks for watching!

@QuiniansBudgetCrafts 3 жыл бұрын

those are great! I've never heard of salt masking I might have to try that

@m3verse 3 жыл бұрын

Oh yeah, look into it, it's great for weathering effects, especially on vehicles.

@darkfantasyarts4231 3 жыл бұрын

New friend, here, nice to meet you, looking forward for more videos from you.

@m3verse 3 жыл бұрын

Thanks for stopping by, I'm glad you're here! I've had to take a little break, but I'll have a new video coming out soon.

@ChimeraWargaming 3 жыл бұрын

I really appreciate this fantastic video.

@m3verse 3 жыл бұрын

Thanks man, I'm glad you liked it!

@sebastiendesautels8567 3 жыл бұрын

Looks awesome! Good job man!

@m3verse 3 жыл бұрын

Thanks you!

@BoysOfCinnamonCat 3 жыл бұрын

Cool looking terrain, lots of detail.

@m3verse 3 жыл бұрын

Thank you! It was really fun to make and the details make the games more immersive. Thanks for watching!

@BoysOfCinnamonCat 3 жыл бұрын

@@m3verse You're welcome.

@FacilityD20 3 жыл бұрын

these turned out great

@m3verse 3 жыл бұрын

Thanks Troy!

@MultiLordHelmchen 2 жыл бұрын

they look great!

@travelersdiecastcustoms1511 4 ай бұрын

Well done 👍👍🔥🔥🔥

@m3verse 4 ай бұрын

Thank you!

@sperrfeuer6982 3 ай бұрын

Awesome Work. Learnt a lot. Thx.

@m3verse 3 ай бұрын

Glad it was helpful!

@ImaginationHobbies 3 жыл бұрын

Wow man. Looks great!

@m3verse 3 жыл бұрын

Thanks man, and thanks for watching!

@mattlechtenberg2777 2 жыл бұрын

Great stuff!

@JERRYR708 2 жыл бұрын

I'm working on your gates right now. I couldn't find a gate I really liked until I found yours and they are awesome. Full length Clip board bases 11 7/8" long The Gantry towers are 9" apart outside width. The start sign was a thin piece of aluminum a little thicker than a soda can. I embossed the letters for a deep hammered look. I didn't want to glue the sign, so I hung it with Micro chain. I want to switch signs out. Next one will be with wood burner.

@m3verse 2 жыл бұрын

Thank you. Sounds like your gates are going to be pretty epic! I like the idea of switching out signs, good thinking. Thanks for the input!

@JERRYR708 2 жыл бұрын

Took me 5 days just to complete the "START" gate. Most time was spent searching for tools, trips to store for material, jigs, and trial and error. The next gates should go easier and quicker. If it was on your game table, it would blend right in. Thanks for the great How-To video. BTW I had to put clamps around the base ends after applying paint, washes, superglue coat and sealer. Otherwise you end up with a rocking horse for a gate.

@m3verse 2 жыл бұрын

I put mine together over a few weeks. Definitely not an easy afternoon craft. I only had one of the bases warp on me, I just put a coat of white glue on the underside and it pulled it back into place as it dried. Glad you're enjoying the build!

@JERRYR708 2 жыл бұрын

@@m3verse White glue on the bottom base is a great idea. I'm applying glue straight away before the humidity refreshes the memory of its former rocking horse. Thanks for the tip.

@RIVERSRPGChannel 3 жыл бұрын

Cool

@m3verse 3 жыл бұрын

Thank you, and thanks for watching!

@scotteverroad4545 2 ай бұрын

I wish I woula met you 3 years ago when I was axtually playin it lol

@m3verse 2 ай бұрын

Hahaha, you can always pick it back up!

@BeardClipper 3 жыл бұрын

Brilliant video - really love the ideas you've shown off in here and I'm definitely going to half-inch some of them for my own stuff :) Take it easy mate :)

@m3verse 3 жыл бұрын

Thank you. Can't wait to see what you come up with, you always have original ideas and execution.

@gameon_ct 3 жыл бұрын

Ok hi, I'm here as Justin but not as Justin. Yeah this is getting meta

@m3verse 3 жыл бұрын

Hunh? What? I have no idea what's going on...

@SaveorDie 3 жыл бұрын

Nice job miller.

@m3verse 3 жыл бұрын

Thanks Hate!

@SaveorDie 3 жыл бұрын

@@m3verse yeah I don’t think I have the patience to stack all that stuff like you did.

@SteveHartline 6 ай бұрын

Love your creativity & aesthetic! Looks like you haven't posted in a while? ... will you be posting again some day?

@m3verse 6 ай бұрын

Thank you for your kind words. I am working on a diorama video , but that might be a couple weeks.

@JaysDiecastCreations 3 жыл бұрын

Oh and I just subscribed 💪👍🏁

@m3verse 3 жыл бұрын

Much appreciated!

@mikehawkins346 3 жыл бұрын

Toxic Avenger!!!

@m3verse 3 жыл бұрын

One of my favorites from my childhood.

@OverboardDM 3 жыл бұрын

I can't find that brown you used. "Cheapo brown" they don't carry that in Alabama

@m3verse 3 жыл бұрын

Lol, I get it at dollar general.

@JohnWise-vg3zj 4 ай бұрын

Do you sell any stuff you create? These are awesome!

@m3verse 4 ай бұрын

Thanks! Yes I do and I take commissions as well. You can contact me through my FB page or on IG.

@cringecasserole 3 жыл бұрын

Hi! I'm here as Justin and not Justin. I get if you're confused.

@m3verse 3 жыл бұрын

Thanks for watching Justin, I won't tell that Justin guy you were here.