I'm glad my 86 442 came factory with the quick ratio steering box I did a quick and cheap upgrade by adding a third gen f-body power steering cooler to my car and added the twin electric fans from the third gen f-body I like your videos I'm doing a lot of the same things to my car that you are doing. Thanks for all the great content your sharing 👍👍

Thank you soo much Man for making this video. I know it was a knuckle buster. Helped my ass alot! Part #s helped too.

If you are upgrading the box to a quicker 12.7:1 ratio box, you need to upgrade the power steering pump flow rate and pressure. The flow restrictor and relief is in the back of the pump where the high pressure line comes out. Drill the office to #26 (0.147") and remove the shim from the relief valve.

As noted I think in a comment down below, steering box from 3rd gen Camaro or Firebird 82-92, it is imprinted with a Z on the top of the steering box which tells you what has the quicker steering ratio. You are correct all of my SS Monte Carlos have the same steering box with the Z, which agian indicates the quicker steering ratio. Thanks for the info on the steering shaft. Peace out.

Great video!

Awesome car.Great video. Great job.Thank u

Another alternative is s-10's, and s-10's blazer with ZQ8 suspension option.

You need to make a turbo out of a leaf blower lol. Crank it up and have it blowing right in the intake

I need to do something like this to my '86 MC SS. Unfortunately this part on amazon cost double now but I still may go with it.

Great video bro I got it done. this is one of the best videos. It help me get it done more faster step by step 👍🏾👍🏾👍🏾👍🏾

Ordered one for my 96 Impala. Says it fits. I'll be installing this tomorrow and see. I have the jeep steering shaft and full QA1 level 2 suspension. This should make it a nice road car.

Good shit appreciate it thanks for sharing

I Sure wish you would have included the step how you disconnect the pitman arm and the Idler arm from the centerlink

Can you please drop the Amazon link for.

These Cardone's fit in a lot of GM products. Great swap for a 12.7 ratio upgrade. Just know that the spline is 3/4 30 vs a 36 spline that was in 60s and 70s cars. Just means you need a new rag joint that is 30 spline.

G body life 🧬

just a fyi it weighs 28lbs nd 8 oz ha ha great video doing a 83 cutty lq9 swap right now keep up the great work dude ( if your not on the brake you better be on the skinny pedal)

Why didn’t u get the box out of a grand Cherokee 96-98 12.7:1 ratio

Would this steering box work on a 1996 chevy C1500? Looks the same but im not sure about the power steering lines and the shaft splines?

got it in my 84 cutlass with the jeep steering shaft but now my power steering line connections are too big got to get lines with smaller diameter connections to fit

I just sent my original steering box to turn one steering who are professional rebuilders, then I used jeep Cherokee steering shaft

No link for items

I know this is an old video but do you remember if this gearbox is slimmer than the original one you removed? It kind of looked like it was from the video when they were side by side but not sure.

hey man, nice video. was wondering if you tried to tighten up the worm gear adjustment on the old box? immaterial know i know, had same issues and that helped me, was going to replace the box as well guess i got lucky.

More like I’m catch you tomorrow motor sports

Will you please tell me what brake line set up you ran to make your rear end work

I was told to stay away from the Cardone units!...i was told they were junk!...

I bought the same gear box on Amazon.. i saw your video where u got a junk yard cherokee steering shaft , in my area there are none for me to find .. what other steering shaft would work with this same gear box

Where is the link for the quicker ratio box?

I have a 1986 Monte Carlo SS what factory steering box does that car have from the factory

Link to the gear box?

will this work for the caprice i have a 86

Looking at your Umi upper control arms how many shims do you have on both sides I really appreciate it if you could give me any information

Appreciate your videos! Will this fit a 1980 Cutlass? I also checked the part number on amazon and It’s not coming up.

Will this work on a 1978 Cutlass?

When turning lock to lock do your tires touch your sway bar at all?

What gear box did you use ? Want to replace mines on my 88 monte , any part number ?

What’s the part number

Will this fit a 1987 oldsmobile cutlass?

I'm looking for a quicker steering for the challenger, is there a solution out there?

Will this part number work for my 1983 Oldsmobile Cutlass Supreme?

I have a G Body MC SS. I replaced it but my flat spot on the steering shaft wont align with the teeth for the pitman arm. Any advice?

hey skinny, has anyone seen a full gbody kit from QA1 or BMR frame off comparison to a something like a custom schwartz frame? like this kzfaq.info/get/bejne/mrd1rcqostmudqc.html