how to ls swap your g body - with part numbers

Рет қаралды 51,511

Жыл бұрын

*i’m in this swap about 4-5k*
parts i used on “mullet jr” include:
junkyard 5.3 lm7 and 4l80e
motor mount - dd-3550c
headers - 25-1026-1
oil pan - stock gen 3 lm7 pan
fuel pump - gss341bx
fuel pump assembly - fg156a
fuel rails - sum-227152
fuel pressure regulator - 7845bk
fuel filter - 5566
intake manifold - ls2
air intake tubing kit - ms-06880 (on amazon)
throttle body - s20008
accelerator pedal - aps128
water pump spacer - 551674
upper radiator hose - 23186
lower radiator hose - 71916
heater bypass hose - 87629
radiator fan - 30749759
power steering pressure hose - 92082
idler pulley relocation kit - 551353
shift linkage kit - cpp02
terminator x max kit - 550-934
cam - elgin 1840p
valve springs - pac 1218
torque converter - circle d hp series 3k stall
flywheel - stock dished lm7 x 4l60 3 bolt
if you’re reading this you got it, have fun burnin rubbas in yo g body, or other vehicle😬

Пікірлер: 268

@grapeseed427 11 ай бұрын

Simple...sweet...and clean as an official's whistle! This is my kind of build, useable and fun. I love it!

@stuntmanjr 11 ай бұрын

that’s exactly what i was going for! thanks😁

@princeansoni 2 ай бұрын

this is exaclty how i want my build in my 85, only thing that concerns me is when that oil sending sensor goes out but, gotta take the good with the bad, hell yeah perfect build👏🏽👏🏽👏🏽

@stuntmanjr 2 ай бұрын

thank you! and my sensor is pretty easy to get to you should be fine👍

@robertemmons2260 6 ай бұрын

Simple, affordable, and doable. This build turned out clean. That idle, though it's a rockin'. Love it. Now, to get some work done on my 82 MC.

@stuntmanjr 6 ай бұрын

thank you! that was the plan, i’m happy i did it. and hell yea love them montes!😎

@richsonslsobs96 11 ай бұрын

Just recently did my obs ls swap an all good as well. I have my g body 86 Monte next in-line , this gives me motivation to keep goin . love the video keep up the good work . Ls swap gang

@stuntmanjr 11 ай бұрын

yer sirr you’ll have it done in a month if you got all the parts!! thank you

@justinavila8229 5 ай бұрын

I’m just getting into wrenching on motorcycles and cars and want a good easy car to work on and haul stuff . Yours is clean dude glad I found this

@stuntmanjr 5 ай бұрын

thank you, before this car i didnt know anything, its a great platform to learn on!

@gbodytoys 11 ай бұрын

Nice ride. Thanks for taking the time to type all of it out.

@stuntmanjr 11 ай бұрын

thank you, and of course! just wanted to share what i learned n hopefully help somebody out

@whodafuk 11 ай бұрын

Nice chop u got there Cuhh. 😳 Ty for the content on your build because budget builds are the norm for most.

@stuntmanjr 11 ай бұрын

yes sirr! thank you🤙

@Letemlive80 2 ай бұрын

Nice clean job under the hood 👌🏽

@HeyIcandothat2 11 ай бұрын

Bless you for dropping the list.

@stuntmanjr 11 ай бұрын

of course! hopefully this can help somebody

@richardeddings7259 16 күн бұрын

How did you mount up your air intake tubing? Do you just have it sitting over there?

@bhwjrproductions 6 ай бұрын

Great looking ElCo. It sounds really nice.

@stuntmanjr 6 ай бұрын

thank you, she’s come a long way😅

@JulianF00 3 ай бұрын

This Is dope asf man I'm doing a Ls swap on my 85 I got the paint job and the bedliner done by a friend now we're doing the Ls Swap

@stuntmanjr 3 ай бұрын

hell yea!!

@germanium1872 10 ай бұрын

That looks really good!!

@stuntmanjr 10 ай бұрын

thank you🤙 it took a while but she was all worth it

@808chevykev 11 ай бұрын

Great job my man,luv the sponsorship shout-outs😂😂

@stuntmanjr 11 ай бұрын

keepin it real😎🤣

@santiagomartinez157 11 ай бұрын

Beautiful ride brotha!

@stuntmanjr 11 ай бұрын

thanks! she’s come a long way

@adrenalinejunkie126 11 ай бұрын

Great job and someone will need this info!!

@stuntmanjr 11 ай бұрын

thank you 😁

@TPerk901 10 ай бұрын

Pretty clean swap and ElCo overall

@stuntmanjr 10 ай бұрын

thank you! she’s come a long way

@lancebishop8967 11 ай бұрын

Love the el Camino the motor is a beast old school that you can drive everyday nice

@stuntmanjr 11 ай бұрын

thank you.. yes sir! been daily driving it with no problems yet!

@aijeMnairdA 10 ай бұрын

Awesome work man! 👏🏽 👏🏽 👏🏽 👏🏽 si quema cuhh!! 💪🏾

@stuntmanjr 10 ай бұрын

ahh yea you know it cuhh😎 thanks sir

@marlygee3859 11 ай бұрын

Clean asf nice EL

@stuntmanjr 11 ай бұрын

thanks sir🤙

@marlygee3859 11 ай бұрын

@stuntmanjr no prob 👌 keep posting about the whip

@chrishope82666 8 ай бұрын

Love it just picked up a 80 model. Thinking of doing something like this.

@stuntmanjr 8 ай бұрын

do it!!

@fresnobassn744 4 ай бұрын

Hella nice work man 👍

@kdawgmedia8398 5 ай бұрын

wit that cone in the back i know you doing good donuts !!!!

@danhedrick1795 11 ай бұрын

Fire it up !

@HEMILYFFE 8 ай бұрын

Gotta watch it to the end My Boi🤙🏾

@JayHartMusic Жыл бұрын

Dope bro 🔥 love that license plate 🌀♿️🅿️🌀💯💯💯

@stuntmanjr Жыл бұрын

thank you sir haha

@JayHartMusic Жыл бұрын

@@stuntmanjr Ctfu yessir 💪🏾💯💯💯

@bigcut695 11 ай бұрын

Keep us posted brother

@stuntmanjr 11 ай бұрын

yes sir will do! swapping oil pan right now.. got a video coming for that

@dude...are-you-sure 2 ай бұрын

Thats one sleeper there the way it looks. Youd never know what was underrneath that hood. Only clue i can see is that its lowered and that personalized license plate LS CUHH 👍❤😎

@stuntmanjr Ай бұрын

best plate ever haha

@jerrynavarro2404 11 ай бұрын

Thats clean bro ! I want to buy an el camino again and this time ls swap it .

@stuntmanjr 11 ай бұрын

thank you! and hell yea you know them g body caminos are practical n classy😎

@countrysmurfcomedy3099 11 ай бұрын

Dattz Wuzzup 💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾🔧 ing 💙.. You really have me thinking about doing that with my 79 Elcamino

@stuntmanjr 10 ай бұрын

do itttt😎

@HandMadeWrath 11 ай бұрын

Expensive parts i like it

@GbodyMedia 11 ай бұрын

Nice build

@stuntmanjr 11 ай бұрын

thank you🤙🤙

@jwtru2life 8 ай бұрын

That tinted windshield is sweet

@hankharris6234 10 ай бұрын

Would love to hear some driving and drive by videos.... It sounded good

@stuntmanjr 10 ай бұрын

thanks im posting some move videos right now!

@sdkins7994 11 ай бұрын

Clean swap

@stuntmanjr 11 ай бұрын

thank you, it took me a while

@sdkins7994 11 ай бұрын

@@stuntmanjr I'm trying to get all the info I need before I get started on my 6.0 swap.

@stuntmanjr 11 ай бұрын

@@sdkins7994 feel free to hit me up with any questions🤙

@danhedrick1795 11 ай бұрын

Nice job

@stuntmanjr 11 ай бұрын

thank you🤙

@BabyDproductions 5 ай бұрын

Dope build, I want to do the same with my 86 Monte Carlo.

@stuntmanjr 5 ай бұрын

git it!!

@BlueCollarMafia 20 күн бұрын

No AC in Az is crazy. But nice build. My first car in high school was a 78 with a 3.6 lol but I’m pushing 40 and want another G body. Another El Camino or another IROCZ. LS swap for sure. 👍

@stuntmanjr 20 күн бұрын

yeah no ac is rough haha, but both of those sound like a perfect choice for a next car😎

@rhandro 11 ай бұрын

Good stuff that's gangster.

@stuntmanjr 11 ай бұрын

thanks sir😎 all she needs now is a new rear end wit some good gears

@anthonythompson5671 11 ай бұрын

That stance nice

@stuntmanjr 11 ай бұрын

hell yea thank you

@anthonythompson5671 11 ай бұрын

@@stuntmanjr Most definitely

@justinharrison3047 10 ай бұрын

on the front of those fuel rails you can run a hollow banjo bolt setup to no have to modify the alt.

@stuntmanjr 10 ай бұрын

dang you’re right.. if that alt goes out one day i’ll definitely do that!

@lindellparker3659 11 ай бұрын

Not bad at all, and didn’t spend a million. Exhaust sounds better than an expensive one.

@stuntmanjr 11 ай бұрын

right! thank you. just a cleaned up junkyard swap!

@juliothunderbird943 11 ай бұрын

Cool old Elco. I got a Gbody Malibu I’m wanting to LS swap

@stuntmanjr 11 ай бұрын

thank you.. i highly suggest it👍👍 drove it 5 hours away to ls fest las vegas averaging 20mpg (with a lot of haulin ass) with 0 issues, so i’d say it’s a worthwhile swap

@dchamb78 11 ай бұрын

Looking forward to seeing more vids. I have almost the exact same setup as u in my 87 cutlass. Same cam headers and all. I went wit a 3800 stall. Rebuilt 4l60 and 373 posi. Its pretty spicy. I tried to make it sound more of a sleeper with the borla xr1 exhaust. Overall im happy.

@stuntmanjr 11 ай бұрын

what kinda rear end, 8.8? if so how hard was it to fit in your ride?? wondering how to do the suspension

@teepopitruckerlife8128 Жыл бұрын

Nice one

@raymanjohan8838 11 ай бұрын

Youre getting 20 miles to the gallon...I cant wait to finish mine

@sanfordrhudy774 10 ай бұрын

Very clean smooth Elky you got, right there man! Does the cold air intake have a bung(I think that's what it's called) for the IAC sensor on back side of it? Cant wait until i get my 69 Chevelle on the road. I put a genIV truck engine in it. About ready to tag/insure it in a few days.

@stuntmanjr 10 ай бұрын

thank you! and yes it does, i hid it underneath the pipe, it’s a standard ax32t sensor and a dorman 42062 grommet. i forgot how big the hole is that i cut for it but it’s been working fine with my holley x max. that’ll be a sweet ride man!

@fullyrooted__org 10 ай бұрын

20 mpg here in this az heat. Holy fawk….. when you see an white Monte Carlo rolling around say what up

@uncleb.cooking 11 ай бұрын

This is inspiring....I have an 83 Camaro that I would like to do this to.

@stuntmanjr 11 ай бұрын

i recommend it! i’m in this swap about 5k

@uncleb.cooking 11 ай бұрын

Wow... did you do the labor yourself?

@stuntmanjr 11 ай бұрын

@@uncleb.cooking yes sir, it took me a while cause it was my first swap, but it can be done pretty quick if you have all the parts and motivation

@uncleb.cooking 11 ай бұрын

@stuntmanjr awesome man,thanks Oh, she sounds great. How does she run?

@stuntmanjr 11 ай бұрын

@@uncleb.cooking thanks i appreciate it, yea she runs great!! i haven’t had one problem with this holley ecu, fires right up n drives me everywhere. even hauled ass to ls fest west 5 hours away from me gettin 20ish mpg! junkyard motor n trans n everything else! just cleaned it up good

@tjbustillos2084 10 ай бұрын

awesome I'm getting ready to do a 6.0 swap I'm my 84 el camino

@dennisalstonZ06 6 ай бұрын

Also get you a rear out of 2000 z28 zexel torsen rear. It fits right in You will have to change the axle to 28 spine

@JCL404 11 ай бұрын

I used the LSX innovations swap mount brackets had to buy a ict billet power steering and alternator bracket kit it wouldn’t clean the power steering box… my long tube headers give me a nightmare to install but got it going

@stuntmanjr 11 ай бұрын

ugh yea that’s the hard part about mixing parts😓 luckily the stuff i used worked out smoothly

@JCL404 11 ай бұрын

@@stuntmanjr that’s good I’m try to upload some video of mine but I actually want to wait till my procharger comes in and get the body work don’t

@timothyknight2236 11 ай бұрын

Nice ride - No A/C and you live in Arizona!!! I betcha that's one HOT ride!!

@stuntmanjr 11 ай бұрын

i work outside all day so im used to it😛 but that is definitely on the list haha

@marks9676 6 ай бұрын

Awesome

@germanium1872 10 ай бұрын

I have a g body Malibu, I wish I had the knowledge to do this kind of swap.

@stuntmanjr 10 ай бұрын

im 21 n jumped into this without any real auto knowledge, learned along the way with google n youtube! if you have the will you can do it for sure!!

@pasadena6267 7 ай бұрын

Clean!! As for the hood clearance on the alternator did u have to cut out the hood for the extra little clearance ?

@stuntmanjr 7 ай бұрын

thank you! and no sir, i just had to scoot the motor back with my sliding mounts. cleared with the truck intake too

@KevinJ-p1k 4 күн бұрын

Absolutely clean man. My daughter wants to do this to her 83 and I think it’s a good after seeing this. How long did it take to get it all set up?

@stuntmanjr 4 күн бұрын

thank you i really appreciate it, i would recommend doing it😁👍 it took me over a year, but i had no prior experience working on engines. if you have an idea of what you’re doing, it should take like 2-3 weeks haha

@kaia5591 10 ай бұрын

Nice ride! Liking the setup. What kind of rims are they? And tire sizes?

@stuntmanjr 10 ай бұрын

thanks, they’re the stock 14x6’s wrapped in some 215/70r14’s

@markellrobinson4447 3 ай бұрын

This guy jnows his stuff

@royfernandez8667 11 ай бұрын

I’m in AZ doing a swap in my cutlass where did you find your 4l80e?

@samueljackson2478 11 ай бұрын

Nice swap, but you can run the same power out of the 3.8 V6 Turbocharged especially if you use Grand National parts and a 12 Bolt main rear or Ford 9 inch rear.

@Spiritof_76 10 ай бұрын

And that swap costs how much and is how easy to find parts for?

@blackgold1111 8 ай бұрын

Who the hell wants a unreliable 6 popper not me. Amazing build buddy haters gonna hate

@Spiritof_76 7 ай бұрын

@@blackgold1111 Unreliable? Are you stoned? The GN/TR 3.8 is a time-proven engine. But it would cost more to install than the LS, unless one just fell in his lap. And who was hating? The original guy was not well informed, but he wasn't hating.

@hosscaddy 2 ай бұрын

You need the fuel tank and sending unit for an elcamino with a 4.3. The grand national sending unit is at the wrong angle

@stuntmanjr 2 ай бұрын

definetly😅 i havent noticed fuel slosh so this will get me by for now till i can buy that😂

@sixeight6 Жыл бұрын

Looks good I'm trying to do my monte carlo do u recommend the holley xmax ??

@stuntmanjr Жыл бұрын

thanks sir! hell yes i do.. i used a 150$ amazon harness the first time around and it worked great too, just didnt have any gauges hooked up so i was driving blind😅 and i had to pay someone to tune it for me. but the xmax kit was just as easy to install and i had my friend help me set up the settings and tune it for free. i can change all my settings whenever i want, have all my gauges on one screen… ill put one in every ls swap i do now

@royfernandez8667 11 ай бұрын

And can you go over the wiring And how you did it?

@The1K0N 9 ай бұрын

Did you have to modify the headers at all im doing a 84 elco right now and have a set of schoenfeld headers that fit but pain to get to plugs

@TurboBobBailey Жыл бұрын

what rear transmission mount did you use, and what sort of mods were required to the crossmember? Was the original trans a 700r4 or a 200-4r? What sort of trans cooler and lines did you go with? Is the trans stock or built? thanks for the vid, it all looks great.

@stuntmanjr Жыл бұрын

thanks brother, its a 04 silverado 4l80 and trans mount, stock camino crossmember with a hole cut in the middle of the tube (i used the same mounting holes on both sides of the frame), ict billet 551124 trans fittings with 90 degree -6 push lock fittings with regular ol rubber trans cooler hoses that go over the headers and ziptied to the frame all the way up front to a hayden 11” cooler. temps usually see 170 driving the car normally

@stuntmanjr Жыл бұрын

also the shift linkage hits the ear on the 4l80 housing you gotta trim that whole thing off if you use the same stuff i did

@slumzmpg2135 11 ай бұрын

@@stuntmanjr where you located

@frezhunter 7 ай бұрын

Where did you route the wiring harness through the firewall?

@migueldesantiago2905 Жыл бұрын

Did you get it tuned? What wires did you use from car bulkhead to terminator? Ls swap mc ss

@stuntmanjr Жыл бұрын

from the car i believe i only spliced into the ignition and brake switch,

@juliangarcia2986 5 күн бұрын

Were they regular long tubes or were they made for a swap?

@Demon083 10 ай бұрын

swamp 4-5k is crazy for what kind of car you get out of it. Im looking to build one as my first project car.

@stuntmanjr 10 ай бұрын

its a super good platform to build on, i definitely recommend it👍👍

@Demon083 10 ай бұрын

@@stuntmanjr i know absotluely nothing and ive ben trying to get as much research as i can. Worst case senario i do a whole engine swap, but now thinking about it m really wanting too considering i could have a lot more fun and reliability. Im just hoping if could get it all done as a beginner. Shouldn't be too hard. Found a Super sport body on marketplace for 600 the other day. No engine so half the work done for me, should i buy and drop a good LS in there with the money i saved?

@stuntmanjr 10 ай бұрын

@@Demon083 hell yea that’s what i’d do! and this is my first swap too, i was 19 when i started and it took me a lot of googling but i feel confident doing it again.. you got it, hardest part for me was initially getting the drivetrain in the car, the rest is legos brotha👍👍

@user-tg1jq6ip2p 10 ай бұрын

im in Az bro...I have an 83 elco... we need to link! I need this same set up lol

@Adamdub612 Ай бұрын

what did u use to get it lowered? looks perfect.

@stuntmanjr Ай бұрын

2 inch lowering springs in the front and some savagely cut rear springs😂 the bump stop on the body was laying on the rear axle haha, not sure if it hurt the rear end because it has been swapped

@kanairsforte23 11 ай бұрын

Get a corvette fuel pressure regulator

@BeeBee-qd9ux 8 ай бұрын

What did you do to the driveshaft

@SuperLattifa1 11 ай бұрын

Did you run your transmission cooler lines through the radiator? What’s the part number on the transmission cooler you used?

@stuntmanjr 11 ай бұрын

the lines go straight to the external cooler, its a hayden 679. mounted in front of the stock radiatior with that volvo fan im usially seeing trans temp chillin at 180

@fieroboy_8622 10 ай бұрын

nice. i no everybody is asking to do a LS Swap on 1 of my pontiac fieros😀

@stuntmanjr 10 ай бұрын

doooo it😆

@Aaron___daniel 4 ай бұрын

dream swap. i have an 1980 i wanna do this to

@stuntmanjr 4 ай бұрын

do it man!

@Toe_Knee_Silva 4 ай бұрын

Sick ride bro 🔥 I'm in North Glendale,AZ... Swapping an L92 into a 72 Impala. Is there anyway to get a hold of you? Thanks for the videos 💪🏼

@stuntmanjr 4 ай бұрын

thank you, ive been trying to get my dad to swap his 74! haha. yes sir, instagram, facebook?

@Toe_Knee_Silva 4 ай бұрын

@@stuntmanjrIs the 74 Impala Lowrider your dad's ride? If so.... daaaaaaamn!

@stuntmanjr 4 ай бұрын

@@Toe_Knee_Silva yea he just built it last year! thank you

@Toe_Knee_Silva 4 ай бұрын

@@stuntmanjr My pops had a 76 Caprice Lowrider, I myself have had a couple...but wanna LS swap this 72 so I can drive it everywhere lol. Your Elco is bad ass too bro.

@lewisdeclouette6342 11 ай бұрын

💯💯💯💯💯💯💯💯💯

@LionsTigersBears 11 ай бұрын

15.3 gallons

@jeremybrady6887 6 ай бұрын

Did you have to do any modifications to the k member or did it just drop right in with no issues?

@stuntmanjr 6 ай бұрын

for a 4l80, i just drilled a hole on the top of the cross m. beam for the trans mount stud to fall into. then cut an access hole on the bottom of the cross m. to tighten the nut. for a 4l60, i had to weld a plate on the front or back (i can’t remember) of the cross m. using the same mounting holes on the frame

@naturallynick1 9 ай бұрын

Question I like ur Elco stance. What did u do to achieve that look..

@stuntmanjr 8 ай бұрын

thanks, at this time i had umi 2” lowering springs in the front, and 4 coils cut out of the rear springs… terrible idea, the bump stop on the chassis was laying on the axle and it tore up my rear brake line above the pumpkin

@kevinbattley70 9 ай бұрын

Did you have to modify the alternator bracket for hood clearance?

@stuntmanjr 9 ай бұрын

no sir! fits just fine under my stock hood with that truck bracket

@user-tg1jq6ip2p 10 ай бұрын

👀👀👀

@naturallynick1 6 ай бұрын

Whats going on man. I just got my Elco and it has 205/75/14 and i wanna different look. What tire size are you running & do they rub

@stuntmanjr 6 ай бұрын

sweet that’s pretty close to my setup in this video.. if you look at my other videos, i have a hotrod wheel/tire combo and it looks damn good😁 i’m running 15x8 0 offset in the rear, with a 1/4 spacer, wrapped in 275/60/15’s. and 15x7 0 offset in the front with 235/60/15’s! i had to clearance the rear fenders to avoid rubbing. wire wheels are also a great fit😉

@seanlsx 11 ай бұрын

With the impala gas pedal, did you have to repin your wires or you just plug in right in?

@stuntmanjr 11 ай бұрын

plugged right into my holley harness, connector is straight 6 pin

@seanlsx 11 ай бұрын

@@stuntmanjr o ok cool, appreciate it

@DiscreetHustle 10 ай бұрын

How to give my vortec 5.3 more torque and speed

@philipmazzuca2269 10 ай бұрын

What oil pan with the Dingo sliders?

@stuntmanjr 10 ай бұрын

i was using the gen 3 truck pan but it hangs down below the crossmember like 3-4 inches.. im using a holley 302-3 now, and the crossmember hangs lower than the oil pan

@gregcowan4477 6 ай бұрын

The Holley terminator part number is for a 5.7 not a 5.3

@ryanm6947 5 ай бұрын

What kind and size wheels?

@user-uy9jd3vd9s 10 ай бұрын

Wheres your shop at? I have a 1980 El Camino want something like this done

@stuntmanjr 10 ай бұрын

all done in the driveway sir👍

@geostorm9351 9 ай бұрын

You got an 85 Elco. Same color too. That’s my goal to do. What’s the ballpark in cost of what you spend the f you don’t mind me asking?

@stuntmanjr 9 ай бұрын

do it! it’s just a junkyard setup with a couple aftermarket parts n i’m into it about 4-5k. super worth it

@ja5435 11 ай бұрын

I have a 86 Buick Regal and I tried getting the engine swapped and I was quoted $30+ thousand and I still have to buy the engine and transmission you get it

@stuntmanjr 11 ай бұрын

whew.. that’s a little too much for me😬 that regal better run 8s for that money haha

@GilbertAz85339 11 ай бұрын

@@stuntmanjrdo you do swaps for other people ?

@germanium1872 10 ай бұрын

I got quoted $5k, and he would provide engine and transmission. You can get an engine and a transmission for like $1200, so he is charging $3800 for labor. I don't think it's bad at all. I wish this guy was the one doing my swap. It looks clean.

@user-md6ns3gz4f 11 ай бұрын

Do you have your A/C hooked up? if so was there much modification needed?

@stuntmanjr 11 ай бұрын

not yet… when that’s hooked up i’ll make another video

@user-md6ns3gz4f 11 ай бұрын

@@stuntmanjr thanks that will be awesome

@2883ROB 4 ай бұрын

The part # for headers says c10. Did you have to modify anything to fit?

@stuntmanjr 4 ай бұрын

well thats interesting, thats the part number i bought 3 years ago that was advertised for g body applications… there must have been other people with fitment issues as well, so they changed the description. i had to slightly hammer in one primary tube on the passenger side, and one or two on the driver side

@stuntmanjr 4 ай бұрын

now with my dingo slider mounts set almost all the way back, there’s not much of a need to beat the headers up to fit haha

@LSMONTE454 10 ай бұрын

Are you running the stock oil pan ?

@stuntmanjr 10 ай бұрын

i was… but i do not suggest it. i’m in the process or replacing it right now with a holley 302-3, it has wayy better clearance

@pasadena6267 8 ай бұрын

Did you need to get a low profile oil pan?

@stuntmanjr 8 ай бұрын

yes i actually swapped to a holley 302-3, i’ll post a video about it

@baylor10010 11 ай бұрын

like the swap, but bro don't you think it's too close to the alt. I mean it's by a spark

@stuntmanjr 11 ай бұрын

i live dangerously🤣

@Thedrumer1400 9 ай бұрын

How about wire harness ? Or tune?

@Mr.boxxchevy 6 ай бұрын

He's using the Holley Terminator x max computer and harness

@JoshArroyo 7 ай бұрын

Did you have any issues with those headers ?

@stuntmanjr 7 ай бұрын

i had to hammer in one primary on each side a little bit, to clear the frame on the passenger side, and lower control arm on the driver side. but… now that i slid my motor back with the dirty dingo mounts, i dont think i would have needed to do that! they’re good👍

@jakehuse5669 5 ай бұрын

Will the stock oil pan clear the g body front cross member or does it require a new oil pan

@stuntmanjr 5 ай бұрын

the truck pans fit, but hang 2 - 2 1/4” below crossmember.. unless you’re lifting the car on big wheels i would not do it

@jakehuse5669 5 ай бұрын

@stuntmanjr no big rims here not my style. So what oil pan do I need

@stuntmanjr 5 ай бұрын

@@jakehuse5669 i made another video on the holley 302-3 pan, it works perfect👍 i spent the money on a real holley one but you will more than likely be just fine with an amazon knock off