How to Make DIY Metal CNC Mill - The CNC Modernization of Old Milling Machine

Рет қаралды 480,263

Күн бұрын

DIY CNC Modernization of an Old Universal Milling Machine
The base machine is an romanian Infratea Oradea FUS 200 mill. It's really similar to machines like Deckel FP1 / GHA Alexander "Master Toolmaker" / Prvomajska ALG 100 / Stankoimport 676 / AVIA FNC25 / Schaublin 13.
This is a video showing the process of modernization of the milling machine from the state where it was a bit refreshed to the moment where it fully works and some tests were made at the end of the video.
The 3D model and wiring diagram are available for my patrons here on KZfaq and Patreon.com.
The whole process including refreshing the machine from a scrapyard condition to a working CNC took about 8 months. The CNC modernization took about half of that time.
I was thinking about building a CNC milling machine from scratch but I found this little machine (~900kg / 1980lbs) for ~$800. So I decided to give it a try.
Firstly during the disassembly process I took some measurements so I could make a 3D model out of it. This made things much easier later when I was designing the mechanical part of it.
This project cost me about ~$3600 including the base machine, SFU1605 ball screw for Y axis and DFU2505 ball screws for X and Z axis, some aluminium and steel stock for essential parts like motor mounts / ball screws adapters, chinese 750W AC servos in each of all 3 axis, pulleys, some tools I didn't have, a VFD for the spindle motor, an incremental encoder for rigid tapping, lots of electrical devices, cables, paint, pump motor and some more things I probably even don't remember. Also my girlfriend sacrificed her old desktop computer to put it in the machine (I love you ❤️).
I hope you enjoyed the video and the building process! If you did - please share it with friends. This might let me to continue my hobby :)
If you find my channel interesting or helpful you might consider becoming my Patron on Patreon.com or a Member of my KZfaq Channel Support!
👉 / gbwm
👉 / @gbwm_cnc
Questions? - Comment down below.
Thanks for watching!
Basic parameters:
- Spindle - 1.9 [kW] / 50-2800 [RPM]
- Movement range X/Y/Z - 246/165/280 [mm]
- Axis Servos 80ST-M02430 750 [W] 3000 [RPM]
- Feed speeds (5000 [mm/min] in X/Y/Z) - This machine could run even 7500 [mm/min] but I find it just too fast. Probably smaller servos like 400W with right pulleys would be enough for feed speeds for a small machine with a slow 2800 [RPM] spindle
- Ball screws in all axis - SFU1605 on Y and DFU2505 on X/Z.
- AXBB-E Controller with UCCNC software (ethernet connection)
- Rigid Tapping ability using incremental 200PPR encoder on the shaft
- Table with two 700 [N] gas springs to make the Z axis run easily with same feeds as Y and X
- HTD 5M 15 [mm] timing belt pulleys (2:1 ratio speed reduction)
- DIY Human-Machine-Interface Panel.
Related videos:
FUS 200 Restoration 👉 • UNIVERSAL MILL RESTORA...
AXBB-E Basics👉 • AXBB-E Ethernet CNC Co...
Other Machine Builds 👉 • DIY Belt Grinder - Sim...
CNC Videos: 👉 • CNC
Also I'd like to give credits to:
My girlfriend and parents:
They always support and help me with my work if necessary :)
@AdamMaszynotwor This guy is sharing his knowledge including machining, DIY CNC topics etc. I'm really grateful - I learned a lot of basics from him which made possible to make my first steps in the DIY CNC world.
CNCdrive.com - the AXBB-E controller from them is a really great choice for CNC projects. The ethernet connection of this controller to the PC is really immune to electric noise made by AC drives like the VFD etc. It makes the machine to be really stable when it comes to the control software and hardware. Now I'm using the UCCNC which I find really great - all the configurations seems to be simple - including the manuals.
Facebook Page 👉 / gbwmcnc
KZfaq Channel 👉 / gbwmweldingmachiningcnc
Twitter 👉 / gbwm6
Instagram 👉 / gbwm_cnc
Tumblr 👉 / gbwm-cnc
TikTok 👉 / gbwm_cnc
Music:
Brandenburg Concerto No4-1 BWV1049 - Classical Whimsical - Kevin MacLeod
Hero's Theme - Twin Musicom
Intermission - Tenebrous Brothers Carnival - Kevin MacLeod
Manic Polka - Kevin MacLeod
00:00 Intro
00:34 The Project
03:06 The CNC Control Panel
13:51 Parts Machining
22:08 Machining Some More Essential Parts
29:55 Aluminium Parts Machining
38:14 Z Axis Servo Mount Surface Machining
40:02 Ball Screw Ends Machining
41:32 The Y Axis
46:36 The X/Z Axis
55:51 The Spindle Encoder
57:28 Limit Switches
1:01:19 The Control Box
1:08:04 The Overview
1:08:35 First Tests
1:09:51 Machining Mt. Everest
1:11:51 Rigid Tapping Test
1:12:25 Final Test

Пікірлер: 320

@mahmoodahmadghaznavi2326 Жыл бұрын

Incredible..... I am a Machinist, I wish I could learn the connections of electrical/ electronic components to set up a cnc. You are wonderful.

@GBWM_CNC Жыл бұрын

I think you should be able to dig into it after watching some of my videos or from other people sharing their knowledge on KZfaq. Thank you! :)

@robertfontaine3650 Жыл бұрын

What an absolute beast. All it takes is money, brains, will power, study.... I hope your machine is making lots of tools and parts.

@GBWM_CNC Жыл бұрын

It helps me a lot with my new projects!

@joepayne8400 Жыл бұрын

Hello mate, just wanted to say I’ve followed your build through and used it to convert my old Boxford Milling Machine to use UCCNC with and AXBB-E. Been an absolute godsend as much easier to follow than the manual. Thank you!

@GBWM_CNC Жыл бұрын

Great to hear! 😍

@johnkoury1116 Жыл бұрын

I have been saving up for a grand ole' mill but even if I could afford one right now my space is limited. Thank you for your informational videos. Very well put together.

@GBWM_CNC Жыл бұрын

Thank you! I have the same issue - hard to find any place for more machines :(

@user-go2ed5zx5x 7 ай бұрын

amazing, This allows us from developing countries to work effectively, efficiently. God bless you.

@PragueTech Ай бұрын

With so many surplus machining centers already out there, pre-engineered to be computer controlled, why spend so much time and energy “re-engineering” a manual machine to be CNC? 90% of your effort is misspent when you could just upgrade an old controller and end up with a far better machine.

@jimsvideos7201 Жыл бұрын

The project and the video are both of exemplary quality!

@GBWM_CNC Жыл бұрын

Thank you. I'm glad you like my work 😁

@komandosdzeki Жыл бұрын

This is a fascinating film for those interested in the world of metalworking and CNC machinery. It provides a step-by-step guide on how to upgrade an old milling machine into a modern CNC metal milling machine, making it an excellent resource for DIY enthusiasts and professionals alike. The video offers a clear and concise explanation of the process, with great attention to detail and safety, making it a must-watch for anyone looking to take on a similar project. 🤑🤑🤑🤑

@GBWM_CNC Жыл бұрын

Thank you for your opinion! Appreciate it! :)

@earlscaanlon4353 5 ай бұрын

❤❤❤❤❤❤❤❤❤❤❤❤❤

@alexandrearaujodecarvalho 21 күн бұрын

Nice to meet you.

@agamilarpes1464 Жыл бұрын

You’re both talented and skillful… 👍 thank you for sharing it.👍 🙏

@GBWM_CNC Жыл бұрын

Thank you! :)

@steve_weinrich Жыл бұрын

Great project and excellent video. Thanks.

@GBWM_CNC Жыл бұрын

Thank you 😁

@yadiimbang260 8 ай бұрын

Amazing spectaculer extraordinary Great creation

@GBWM_CNC 8 ай бұрын

Thanks :)

@davideliasfloresescalante8840 Жыл бұрын

This looks POWERFUL

@GBWM_CNC Жыл бұрын

Hope so!

@tigxxl Жыл бұрын

No i taki kontent youtub mi tu powinien promować na pierwszej stronie a nie jakieś pierdoły !!!!!!!!!! Widać ogrom pracy, ale i też pomysł a nie robimy a później jakoś to będzie! Naprawdę poważny projekt 👌👍👏

@GBWM_CNC Жыл бұрын

Bardzo mi miło 😁

@mulberryworkshop Жыл бұрын

Awesome work there mate.

@GBWM_CNC Жыл бұрын

Thanks bro! 😎

@andyb182 11 ай бұрын

Neat job. Well done !

@GBWM_CNC 11 ай бұрын

Thanks! ;)

@sims76 9 ай бұрын

Impressionnant ! Beaucoup de travail de précision, vous êtes très talentueux, bravo

@GBWM_CNC 9 ай бұрын

merci! :)

@prasannashoorjoshi2582 Жыл бұрын

Great work man.

@GBWM_CNC Жыл бұрын

Thanks!

@pierogiovanni7792 Жыл бұрын

FANTASTIC JOB

@GBWM_CNC Жыл бұрын

Thanks!

@plasmaxer 11 ай бұрын

Excellent music selection and educational video.

@GBWM_CNC 11 ай бұрын

Thank you :)

@mickynixon3117 Жыл бұрын

bloody gifted dude :) respect

@GBWM_CNC Жыл бұрын

😊

@DinosRcModels Жыл бұрын

Adoro le lavorazioni meccaniche intrammezzate da pezzi di musica classica! Top!

@GBWM_CNC Жыл бұрын

Ahah sono contenta che ti sia piaciuto! Piace anche a me! Grazie per la visione! :)

@adamzawada2440 Жыл бұрын

Grzegorz, niesamowita robota! Zycze sukcesow i miliona subskrybentow!

@GBWM_CNC Жыл бұрын

Dziękuję bardzo :) Cel odległy jeszcze ale może kiedyś 😁

@ClearlyCero Жыл бұрын

@@GBWM_CNC Ja nie mowie dobze po polsku ale dobra robota!

@richybean2421 Жыл бұрын

excellent work sir

@GBWM_CNC Жыл бұрын

Thank you! :)

@qizang1320 7 ай бұрын

so crazy and you are artist

@alexandrearaujodecarvalho 21 күн бұрын

Good job.

@alexandrearaujodecarvalho 21 күн бұрын

Hello teacher! My name is Alexandre, I am 36 years old, I am from Brazil. I was born in Rio de Janeiro city.

@Damianek321 Жыл бұрын

Super robota!

@GBWM_CNC Жыл бұрын

Dzięki! 😁

@PawelDrogomirecki7uP 11 ай бұрын

Excelentes ideias neste canal!!!

@GBWM_CNC 11 ай бұрын

@OurbabyhoodVlog 10 ай бұрын

You are a genius man...best of luck

@GBWM_CNC 10 ай бұрын

thank you :)

@mechatropol Жыл бұрын

Wow. High level !

@GBWM_CNC Жыл бұрын

thanks! :)

@MrTik-ex2oh Жыл бұрын

I've watched until end😍👍

@GBWM_CNC Жыл бұрын

Great!😍

@encaemberp5916 6 ай бұрын

Crazy modification... Amazing... Irally love it

@GBWM_CNC 6 ай бұрын

I'm glad you like it! :)

@Bartolobot Жыл бұрын

Good idea to use the old CPU case for the mounting points on the mother board.

@user-xq8lu7pn9b 10 ай бұрын

Amazing! 😊

@GBWM_CNC 10 ай бұрын

thank you! :)

@jameshicks6753 3 ай бұрын

Nice job, you did most outstanding 5 GOLD STARS 🌟

@GBWM_CNC 3 ай бұрын

thanks! :)

@jerrymellca5366 3 ай бұрын

Wah benar benar harus teliti dan perhitungan yang presisi. Saya kagum sekali melihat pekerjaanmu . Mantap ...

@GBWM_CNC Жыл бұрын

This build was a lot of work! Hope you liked the video. Thanks for watching!

@jorgeo4483 Жыл бұрын

Macho, eres un fenómeno, con esto ya me deprimes, tienes que poner en alguna parte los criterios e instrucciones para todo el tema eléctrico y también cómo se consigue la pasta para poder construir todo lo que haces, eso es lo que peor se me da a mi. Mi sueño sería poder diseñar una multimáquina que aprovechase al menos los controles y motores para varias cosas, en una escala para poco espacio, un taller pequeño de una persona pero con una potencia y calidad razonables. Ahora mismo hay tal variedad de rutas que seguir, controladores, motores, actuadores lineales, software, que se pierde uno. Por cierto, eres argentino, uruguayo, chileno?

@GBWM_CNC Жыл бұрын

@@jorgeo4483 ¡Me alegra que te guste mi trabajo! :) Tengo un trabajo diurno y gasto la mayor parte de mis ahorros en mis máquinas ¡jajaja! Los sueños están ahí para hacerlos realidad. También estoy pensando en una máquina multiproceso, tal vez en el futuro si tengo suficiente tiempo y dinero. Algo así como una máquina de fresado y torneado. Y sí, tienes razón. Hoy en día hay tantas posibilidades que tenemos que elegir lo correcto en el presupuesto que tenemos. Y yo soy de Polonia jajaja! :)

@jorgeo4483 Жыл бұрын

@@GBWM_CNC Vaya! No me imaginaba que bebierais eso en Polonia. La verdad es que la mayoría de mis suscripciones son de polacos, sois muy buenos con las máquinas.

@GBWM_CNC Жыл бұрын

@@jorgeo4483 De hecho, la yerba mate es bastante popular aquí :)

@EnglishTurbines Жыл бұрын

Nice to see a real Milling machine with proper cast iron chassis and dovetail slides converted to CNC. I was trying to explain the difference to a numpty between this and those stupid ball slide rail setups which result in a glorified Routing machine IMO...🤔😳😏...Kudos for your multi talented skills...🤔😏😀🇬🇧

@GBWM_CNC Жыл бұрын

I'm glad you like it! There are pros and cons of dovetails. For super heavy cuts proper dovetails are great if the geometry is ok. But the ball rails can achieve much higher speeds as there is some other kind of friction. Depends what you need! :)

@EnglishTurbines Жыл бұрын

@@GBWM_CNC Yes, agreed. Having spent 21 of my earlier years Milling, I'm old School. I know ball slides have little friction, but they also don't absorb vibration or tolerate heavy cuts. Some of our big CNC mills had plain hardened Tee slides, hydraulic assisted and did move at high speeds....MOD engineering making weapons...lol..A different planet I guess...🤔😳😏😀🇬🇧

@GBWM_CNC Жыл бұрын

@@EnglishTurbines that's interesting, have to read about it! 😁🤔

@EnglishTurbines Жыл бұрын

@@GBWM_CNC Yes, machining a Breech Ring...Basically precision milling of a block of Gunmetal the size of a Fiat 500 car....lol....It is a different planet TBF...🤔😳😏🇬🇧

@GBWM_CNC Жыл бұрын

@@EnglishTurbines Can't even imagine that!

@carlosalbertocarlos6956 10 ай бұрын

O vídeo de construção de máquina mais top do mundo 👍👍👍👍👍👍

@GBWM_CNC 10 ай бұрын

ah, obrigado! :)

@didierdudu7910 10 ай бұрын

Salut, super travail moi même je fais un peu le même genre de travail que vous dans mon atelier !!!! mais je suis sur MACH 3!!! encore bravo et merci beaucoup pour ce bon moment!!

@GBWM_CNC 10 ай бұрын

haha! J'utilisais mach3 mais je suis passé à UCCNC que j'aime beaucoup. salutations!

@josepanchame5765 3 ай бұрын

Eres un genio, te felicito, admiro mucho tu trabajo.

@GBWM_CNC 3 ай бұрын

gracias! :)

@eneskaradere9162 11 ай бұрын

hi 'm from Turkey and I do not know how can I Thanks bro. Just a Satisfactory job.

@GBWM_CNC 11 ай бұрын

Hi! I'm glad you like my work! You can hit the thumbs up and subscribe button if you like :)

@Bianchi77 Жыл бұрын

Nice video, thanks :)

@GBWM_CNC Жыл бұрын

I'm glad you like it! :)

@alitn588 5 ай бұрын

Beautiful job mate 👍 But it was very complicated... 😉👍

@TrPrecisionMachining Жыл бұрын

very good video GBWN

@GBWM_CNC Жыл бұрын

Thank you Michel! :)

@mr.ranyhomemade2466 Жыл бұрын

Such amazing your intelligence skills how to turn drill machine to the best CNC MACHINE.

@GBWM_CNC Жыл бұрын

Thank you Mr. Rany! :)

@i3530ee Жыл бұрын

Ja dopiero rozpoczynam swoją drogę w tego typu tematach i po obejrzeniu aż chce człowiek brać za robote

@GBWM_CNC Жыл бұрын

Miło słyszeć! Też tak miałem oglądając inne filmy :)

@raulbenestante9623 Жыл бұрын

Muy buen video, excelente trabajo y un detalle, estoy observando como deja la superficie la fresa y me parece que hay un tema de (juego) vibración en el husillo, felicitaciones.

@GBWM_CNC Жыл бұрын

Sí. Parece que hay alguna pequeña reacción violenta o algo así. Tal vez pueda arreglarlo. ¡Gracias!

@samuraimachinetools Жыл бұрын

Great editing, and nice project

@GBWM_CNC Жыл бұрын

Thank you! :)

@wiktorwilno9167 Жыл бұрын

super robota

@GBWM_CNC Жыл бұрын

Dzięki! 😁

@abdurrahmaneminoglu6311 11 ай бұрын

THANK A LOT

@OSCARALBERTOREY 5 ай бұрын

Estimado amigo: Ante todo, y dando por sentado que sos rioplatense (argentino ó uruguayo) por el protagonismo del mate en tu video, decirte que eso me llena de orgullo y más admiración. Sencillamente, tu trabajo ha sido magistral, entretenido, bien filmado... absolutamente atrapante para quienes amamos rescatar las buenas herramientas y darles una segunda vida. Reconforta contar con este material para aprender el buen uso de las herramientas, el detalle en la elaboración de las piezas, la prolijidad, la economía en la selección de los materiales y el respeto por esos materiales y las partes de esa noble y antigua fresadora. todo armoniza y conserva la esencia de lo realmente bien hecho. Felicitaciones y que sigas regalándonos estas maravillas. SSoy de Santa Fe, donde nacieron los afamados tornos y fresadoras SIDERAL, OMA (ya desaparecidas) y tanta metalmecánica que era nuestro estandarte de calidad. Un fuerte abrazo!

@GBWM_CNC 5 ай бұрын

¡Me alegra mucho que te guste mi trabajo! Lamentablemente no soy de esa zona porque soy de Polonia. Pero realmente aprecio tus bebidas de yerba mate :)

@craigjohnson5189 Жыл бұрын

Awesome build and work! Did you have to do much work or testing on the CV settings in UCCNC? If so could you explain how you did and the results?

@GBWM_CNC Жыл бұрын

Honestly? I didn't touch the CV settings yet. But I might do some tests.

@trumanhw 7 ай бұрын

MAN I love your content. 1 sugg: More -cowbell- chamfers?

@GBWM_CNC 7 ай бұрын

Where's no chamfers there is human blood! Will consider! :) Glad you like my content! :)

@user-yu8og2ur5h Жыл бұрын

Це проект був розроблений для всіх людей світу ,це правда

@GBWM_CNC Жыл бұрын

так!

@user-yu8og2ur5h Жыл бұрын

Це ви скоти не знали

@Baard2000 Жыл бұрын

When milling the mount everest .. The axis make a lot of very small movements. That leads to break up of the oil film between the sliding parts of the bedways. In the end it will cause fretting of bedways. Either lube the bedways a lot to prevent that. Or , like I do , program each so many lines a longer movement in z axis, than y and x and back to point where it was. With that oilfilm thickness is restored again

@GBWM_CNC Жыл бұрын

I get the point - you mean the stip-slick effect? But I don't exactly get the point about longer movement in z axis - could you explain? Thanks! :)

@eddymorra1403 Жыл бұрын

I like your mill

@GBWM_CNC Жыл бұрын

I'm glad you like it :)

@systemvel Жыл бұрын

Молодец классно получилось! у меня почти такой же 676 чпу

@GBWM_CNC Жыл бұрын

Большой! 676 немного больше, что очень приятно

@alexandrearaujodecarvalho 21 күн бұрын

God bless you.

@MarceloPereira-ei8hl Жыл бұрын

Bom video parabéns

@GBWM_CNC Жыл бұрын

Obrigado!

@915breno Жыл бұрын

awesome build man! hey I have a question, how much HP your spindle has and what are the max RPM!?

@GBWM_CNC Жыл бұрын

Thanks! The spindle is 2.55HP with a gearbox so it can do from about 20RPM up to ~3000 RPM (from factory it could do max 1900RPM but thanks to the VFD I can output a little bit higher RPM thanks to the higher frequency ouput).

@bambangirawan6011 10 ай бұрын

Vidio yang sangat menarik untuk disaksikan edukasi nya 👍👍👍

@GBWM_CNC 10 ай бұрын

Aku senang kau menyukainya! :)

@alializadeh8195 Жыл бұрын

Thanks all ...

@diywithreza Жыл бұрын

Another awesome video! btw how did you learn all the electronics of a CNC machine?

@GBWM_CNC Жыл бұрын

Thanks! I learned a lot from other KZfaq channels, device manuals, technical websites etc. And some basics from school :)

@andydemin3105 3 ай бұрын

nice conversion thx for going down to detail in the build I am about to change a new 'chinese origin' manual mill to cnc did enjoy the video and i am very curious about what you are drinking

@GBWM_CNC 3 ай бұрын

The tea I'm drinking is called yerba mate. I saw some people converting chinese mills to CNC succesfully - good luck!

@alexandrearaujodecarvalho 21 күн бұрын

I have been working for eight hours. I am working right now.

@FUKTxProductions Жыл бұрын

man u must go through a lot of cutoff wheels! ever thought of making a bandsaw for all those metal cuts?

@mrthanh1700 Жыл бұрын

good

@sadrapourezzat Күн бұрын

Hello, good job and well done with your sort of artwork have done; I really enjoy watching your channel, I'm just wondered is this machine are close loop in axis servo motors? I mean is the main CNC controller is given feedback from servo motors encoders or just there is only an encoder for spindle connected to CNC motion card? Thanks for the time you putting on answering...🙏

@lhunpu 11 ай бұрын

It's awesome... please make a simple milling machine

@GBWM_CNC 11 ай бұрын

Thanks! This is simple, isn't it? :D

@carlosdanielromero2618 7 ай бұрын

Excelente trabajo, la verdad consideraba muy complicado poder crear algo de tales dimensiones, he armado mis propias cncs de corte laser y basicas para madera. Usted vende sus planos o diseños para sus maquinas? Me gustaria intentarlo

@GBWM_CNC 7 ай бұрын

Comparto algunos planes con mis patrocinadores en Patreon, pero prefiero no ceñirme exactamente a ellos, ya que son planes simples para empezar y normalmente hago cambios durante mi trabajo en el taller. Normalmente intento dar una idea a mis espectadores de cómo se podría hacer todo :)

@wh0tube 6 ай бұрын

Thank you very much this was just wow! 👍👍 would you be able to do a step by step video of your herbal tea preparation? Can you use oxy-acetylene to boil the water or do you need plasma? Thank you 🙏

@GBWM_CNC 6 ай бұрын

Maybe someday I will make a video showing some more details about yerba mate. I didn't try boiling water with oxy-acetylene or pasma though, haha!: )

@basedmonkey5622 Жыл бұрын

Great project, how long did it take to complete the project from start to finish?

@jacqueschaillet7913 Жыл бұрын

Hello in the comment it's noticed :" L'ensemble du processus, y compris le rafraîchissement de la machine d'un état de casse à une CNC fonctionnelle, a pris environ 8 mois. La modernisation de la CNC a pris environ la moitié de ce temps. " Near 8 month with half of that time to modernise the CNC. 😇

@GBWM_CNC Жыл бұрын

Exactly as Jacques said. About 8 months including restoration and half of that time for cnc modernization. I've spent my whole holidays on this machine haha :)

@stfcasii3681 Жыл бұрын

Super proiect, ca nivel de tolerante cam ce precizie poate scoate la frezare masina? Atinge precizia de 2,3 sutimi ? Sau e ceva mai mult ? Mersi frumos!

@GBWM_CNC Жыл бұрын

Bună! În acest moment, se pare că mai are nevoie de unele ajustări, deoarece majoritatea dimensiunilor sunt în toleranță, așa cum vedeți în videoclip (de obicei, aproximativ 5 mii, dar există unele probleme în care se pare că merge puțin mai sus). De asemenea, nu am prea multă experiență în alegerea vitezei de avans potrivite pentru mașina mea - probabil că parametrii potriviți ar trebui să o îmbunătățească

@MarceloPereira-vl3gh Жыл бұрын

Lindo trabalho parabéns tô estudando quero ser assim também logo chego aí ser deus quiser nunca é tarde pra começa 😊😊

@GBWM_CNC Жыл бұрын

obrigado! :) sempre bom entrar em hobbies interessantes

@AMINGENERIA 7 ай бұрын

Excelente proyecto , muy bueno y cretivo. Tambien me soprendio ver que tomes terere es una bebida tradicional de paraguay, no parece mate y aparte que utilizas una llerba paraguaya de una marca reconocida en paraguay. No sabia que en tu pais se tome o es una costumbre tuya nada mas ? es curioso saber..

@GBWM_CNC 7 ай бұрын

¡Jaja gracias! Y gracias a tu país por esta maravillosa bebida. La yerba se está extendiendo por mi país. Empecé a tomar yerba hace como 3 años y entonces era muy raro ver a alguien beberla. Hoy en día es muy popular. Me alegra que mi contenido te haya llamado la atención. ¡Saludos desde Polonia! :)

@cientistaanonimo7658 9 ай бұрын

My friend, you made me want to drink Chimarrão. hahahaha

@GBWM_CNC 9 ай бұрын

Oh, I didn't try that type of mate yet! is it any good?

@SandiWelah305 2 ай бұрын

goood jooob 👍👍👍

@GBWM_CNC 2 ай бұрын

THX! :)

@Osman_baso Жыл бұрын

Videonuz çok güzel

@GBWM_CNC Жыл бұрын

Teşekkürler! :)

@jacekejsmont Жыл бұрын

Siedzę i oglądam z zaciekawieniem. Widzę Darmet na imadle. Czyżbyś był z Podlasia?

@GBWM_CNC Жыл бұрын

Nie jestem z Podlasia ale imadło bardzo dobre :)

@zacsgarage5985 9 ай бұрын

What program did you use to create this model

@kojomensah7474 6 ай бұрын

Greetings do you have detail plans please??

@dalessi8331 Жыл бұрын

Se droga direto no chimarrão!😁

@GBWM_CNC Жыл бұрын

Ainda não provei chimarrão! :D

@marcinranoszek64 Жыл бұрын

kawał dobrej roboty ;) jakieś plany na kolejne realizacje - zdradzisz coś czego możemy się spodziewać?

@GBWM_CNC Жыл бұрын

Dzięki! :) W planach są już mniejsze / większe projekty. Na ten moment z takich stosunkowo większych projektów to planuję zrobić piłę taśmową własnej roboty bo na co dzień bardzo mi jej brakuje. Gdzieś po drodze będą jakiejś mniejsze projekty na pewno. A w dalszej przyszłości na pewno przyszykuję znowu coś większego - chodzi mi po głowie druga tokarka CNC z poprawionymi błędami z pierwszej / tokarko- frezarka CNC czy frezarka 5-osiowa. Ale to jeszcze muszę wszystko przemyśleć bo to już dość konkretne plany ;)

@marcinranoszek64 Жыл бұрын

@@GBWM_CNC no też to dostrzegłem że brak piły. Jeśli masz miejsce polecam plazmę cnc choćby z polem roboczym 1m x 1m jeśli jest miejsce to większe ale taka nawet minimalna bardzo się przydaje a koszt nie jest aż taki straszny. Polecam sterownik proma myplasm. Edit: Chociaż tak myślę że w Twoim przypadku plazma nie jest aż tak przydatna bo masz frezarke. 😅

@GBWM_CNC Жыл бұрын

@@marcinranoszek64 Noo plazma albo nawet laser też mi chodzi po głowie :D Tylko musiałbym warsztat powoli powiększać. Moja frezarka ma też małe pole obróbki więc plazma byłaby niezłym dopełnieniem :)

@marcinranoszek64 Жыл бұрын

@@GBWM_CNC no zdecydowanie plazma ułatwia pracę jak robi się jakieś prototypy. Gdybys miał jakieś pytania to pisz. Ja swoją zrobiłem 4m x 2m. Palę na niej bardzo rzadko bo zrobiłem ją zbyt dużą a nie mam na tyle miejsca i z reguły jest zastawiona. Teraz chce zrobić coś małego 1m x 1m pola roboczego.

@GBWM_CNC Жыл бұрын

@@marcinranoszek64 Jak dojdę do etapu, kiedy będę się poważniej zastanawiał nad budową na pewno podbiję! :)

@Zwariowny Жыл бұрын

Film to tylko 1:21 ciekawe ile dni nad tym ci się zeszło bo patrząc na ogarnięcie samych kabli a to niezłe spaghetti to myślę, że minimum dzień. Całkiem fajna maszyna bo nie zajmuje pół warsztatu i całkiem profesjonalnie ją przerobiłeś. Ja bym tak nie ufał tej suwmiarce, mam już 3 w kolekcji i przekłamuje 0,13mm ale na szczęście pomiary są powtarzalne (jakaś made in france)

@GBWM_CNC Жыл бұрын

Noo roboty było sporo. Szczerze to sama elektryka to była już przyjemność i zajęło to może z 3 dni. Ale cała reszta to pomijając lekkie odnowienie maszyny to praktycznie całe wakacje nad tym spędziłem. A czy ufać suwmiarce, hmmm. Myślałem że suwmiarce z mitutoyo można ufać 😁 dzięki za oglądanie

@alexandrearaujodecarvalho 21 күн бұрын

2) OPERAÇÕES ESPECÍFICAS DO OFÍCIO: •Afiar ferramenta de corte •Afiar broca helicoidal •Facear •Sangrar no torno •Tornear superfície cilíndrica na placa universal •Fazer furo de centro •Tornear entre placa e ponta •Recartilhar no torno •Tornear cônico externo •Tornear convexo (bimanual) •Abrir rosca com macho e tarraxa no torno •Furar com broca helicoidal no torno •Perfilar com ferramenta de forma •Tornear cilíndrico entre pontas •Tornear cônico desalinhado o cabeçote móvel •Tornear cônico interno usando a espera •Tornear superfície cilíndrica interna •Fundamentos físicos da Pneumática •Compressores: Tipos construtivos, princípio de funcionamento, desmontagem e montagem de compressores de 2 estágios •Tratamento do ar comprimido: Secagem, filtragem, armazenagem e drenagem •Unidade de conservação: Princípio de funcionamento, aplicação •Distribuição do ar comprimido: Reservatório, tubulação e conexões •Cilindros e motores pneumáticos: Princípio de funcionamento, tipos construtivos, cálculos de força, pressão e área •Exemplos de aplicação, desmontagem e montagem de cilindros de dupla ação de aplicação metrô/ferroviária, identificação de componentes •Válvulas direcionais, válvulas de bloqueio, válvula de controle de fluxo, controle de pressão, exemplo de aplicação, desmontagem, montagem aplicação metrô/ferroviária •Pressostato: Funcionamento, regulagem, aplicação metrô/ferroviária •Simbologias •Normas de segurança e Montagens práticas em bancada de simulação

@mustafayilmaz4771 Жыл бұрын

Good joob ı like it

@GBWM_CNC Жыл бұрын

thanks!

@Doctor_88 6 ай бұрын

Whay you use ac servo motor on mill and on the your cnc lathe you use stepper motors close loop?

@GBWM_CNC 6 ай бұрын

I wanted to try AC servos - these are really fast motors. On lathe I use stepper motors OPEN loop - very cheap

@Doctor_88 6 ай бұрын

@@GBWM_CNC but witch are bether servo or close loop stepers

@GBWM_CNC 6 ай бұрын

@@Doctor_88 Depends - generaly servos are better usually. The speeds these achieve are great. But its more complicated to get them working and usually those cost more

@riteshsharma6975 10 ай бұрын

Klein Pass-Thru Modular Wire Crimper, All-in-One Tool Cuts, Strips, Crimps, Fast and Reliable Tools VDV226-110 and KLEIN TOOLS VDV501-851 Scout Pro 3 Cable Tester , My Company need these two tools. I am currently in United Arab Emirates. Online purchase isn't allowed. Could you please suggest.

@GBWM_CNC 10 ай бұрын

sadly I can't help you with this

@uranuz30 Жыл бұрын

congratulations, good work, please, the name software...thanks

@GBWM_CNC Жыл бұрын

Thanks! Which one? For design I used f360. Very useful for hobby use

@user-yh9ty4fy2x 11 ай бұрын

tuyet vơi nhé bạn

@StephenSnowman Жыл бұрын

Would you mind telling us the final cost of purchasing this end mill to completion?

@GBWM_CNC Жыл бұрын

As I mentioned in the description of the video - everything I bought together was about $3400 :)

@dominikzawada2773 Жыл бұрын

Woow 😍😍 Well done! 😜🤑

@GBWM_CNC Жыл бұрын

Thanks! :)

@SKTechnology44RUS Жыл бұрын

Шик и блеск. Что за чай ты пил ,чтобы сделать этот станок ? )))

@GBWM_CNC Жыл бұрын

Спасибо! Этот чай называется йерба мате.

@SKTechnology44RUS Жыл бұрын

@@GBWM_CNC Понятно . Надо тогда бомбилью начинать точить на станке )

@athrunzala5337 Жыл бұрын

Nice project, Where are you from?

@GBWM_CNC Жыл бұрын

thanks! poland here

@benzinneft2729 Жыл бұрын

🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

@GBWM_CNC Жыл бұрын

💪

@BASF111 Ай бұрын

Мне понравилось видео, я честно 2 раза посмотрел

@GBWM_CNC Ай бұрын

thank you! :)

@KF-qj2rn Жыл бұрын

better accuracy than a Haas or Tormach..

@GBWM_CNC Жыл бұрын

😎

@elmarhesenov8149 Жыл бұрын

Do your servo motors have brakes or not

@GBWM_CNC Жыл бұрын

No brakes

@Marcelo-56 Жыл бұрын

13:30 El gabinete, caja o compartimento donde puso toda la electrónica no tiene entrada de aire fresco y salida de aire caliente. Tendrá desperfectos con la computadora a corto plazo. En electrónica, el calor es uno de los grandes problemas‼️

@GBWM_CNC Жыл бұрын

Ni siquiera pensé en eso. Tendré que comprobar la temperatura de la PC durante el trabajo. Gracias