Have this machine also, it is absolutely amazing. By the way you can manually turn the light in the machine on using the wrinkle guard button I believe hold it down for 3 seconds.

GE said they oversized the heat pump knowing families will max it out. Lol. So true. FYI, the GE heat pump is twice the size of the LG model.

I’m subscribing. Video’s great, my literal one and only request is please - please make more reviews as time goes on. 2 years, 3 years, 5 years and so on. Aspiring to get into real estate development, that 110v supply and dual function in compact space has me very interested in putting these into units; if they prove reliable in the long term.

We've had ours for about two months now and have been very pleased thus far. As for the height off the floor/short OEM pedestal issue, before ours was delivered we purchased a rolling appliance base from Amazon for about $55 and had the machine placed on the base by the delivery men. The combo machine weighs 300 pounds, so it is much more difficult to move than a separate washing machine and dryer. Now, we can easily roll it in and out of its normal location (you know, to find the sock that's been trying to escape) and while it's being used, we can lock the wheels and lower the adjustable feet on the base (which also has built-in bubble levels on each side). Plus, the rolling base lifts the unit far enough off the floor to enable placing a small bowl or food storage container under the lower filter door to catch the water that pours out when you first remove it. Just be sure you purchase the base that adjusts between 27.5 and 35.4 inches per side, as the machine itself is about 29 inches wide at the base. According to the seller, the base can hold up to 1100 pounds, well in excess of the machine's weight.

I installed our pedestal after the initial install. It was not easy. We are a family of 6 with two dogs and this works great.

It's an excellent machine I bought it watching your reviews and a couple others. Love it! I didn't want to pay the extra for the pedestal either but I used 8 inch cinder blocks. the machine does not jump around and if you don't want the look of the cinder blocks you can paint them. Perfect for draining the clean out and they are cheap... Thanks for your video... Cute pup in the reflection

Great looking unit. For bigger families, you could put 2 of them where there used to be a washer & dryer and it'd really save some time. I'm not quite sold on the technology yet. I would love to see a 3 or a 5-year review. For me, it appears there's too much required maintenance compared to a typical washer and dryer and I don't believe they will have the average lifespan of a traditional front loader.

I have this machine as well and absolutely love everything about it.

Love mine too. I got the pedestal free when I bought this machine. It was part of the Labor Day sale at Best Buy.

Thank you for the review. We have had ours a couple months. Bought mostly because of the 110 power & having a small space. I really like not having to move wet laundry to a dryer. The hardest thing to do is the maintenance cleaning. We deep clean the upper filter area with brushes & shop vac. Amazon hose/brush set less than $10. That lower filter valve is very difficult to access but needs frequent cleaning often especially if you have pets. We clean the lint catcher each load and it still got quite a bit of loose lint in the slot & on the right side grates where lint isn’t supposed to collect. I may try that high heat resistant tape hack from KZfaq to eliminate some of excess lint collecting where not supposed to. I had a problem with machine starting a load and then shutting off minutes later without showing any error or trace of the load info in the app. It was time for an app update so I assumed the app was just glitching and I turned it on again and it shut off again. This was nearly disastrous because there was a sudden clog in the lower valve. The hair didn’t allow for the valve to be retightened and all the water from both started cycles poured out under machine, refrigerator next to it and under cabinet to the trash can (thankfully our tiny house has a bit of a slope because cabinet couldn’t be moved) but we moved the washer/dryer combo and refrigerator with appliance dolly to dry under them. Thankfully hardwood flooring is fine. Learn from my mistake and don’t ever restart cycle if it stops. We are also going to clean that lower valve trap more often even though it’s a hard and I’m going to try FurZappers to catch pet hair in washer bought on Amazon to control the hair going into filters. It’s a great machine - it just needs more cleaning effort than my old Speed Queen workhorses.

Thanks for the great video. If you dont want to use fabric softner why not just turn off the option. It should be that simple. As for the drum light I think if you press and hold one of the options it will put the drum light on for a few minutes while the unit operates.

I bought mine shortly after watching your initial review among others. I love it as well. I put liquid laundry sanitizer instead of softener in the dispenser, maybe try that to avoid the low warning every time.

I highly recommend getting a pedestal or making your own. I got one with the drawer and i love not having to bend over to get clothes in and out and makes cleaning the bottom filter easier. Love this machine hand it for 3 months so far

It’s nice to have the remote start because some people pay more $ for time of use. So u can remote start it on the way home and it can be ready by the time ur home. Or you if u mid shift u can remote start it at 8pm which is significantly lower $ than during the day.

Interesting info. I got one (Open box so saved over $1000) and it seems to work great. The only issues I have is it says 'Energy Tracking' and according to GE this is not supported, and the LED light will not come on with the 3 second press for some reason after a software update.

I just purchased this and I’m excited about this combo

I wanted to let you know that the filter on the bottom of the unit should be able to be drained before you open the filter. I literally just found this out about my Samsung washer. There should be a small hose. You unplug the hose and drain the water into a bowl or dish, and then once it's done draining, you can open the filter. A little water might come out, but it should gush out like you mentioned. Like I said, my Samsung washer has that same filter on the bottom that is supposed to be cleaned once a month. I hope that helps you! Live the video, btw. Wish I had known these were a thing before I had bought my washer and dryer lmfao.

I've had mine since late June and I like the machine but I do have a major concern with how the lint filter works. I clean my lint filter after every load and I'm a very light user. I get quite a bit of lint on my filter after each use. But here's my problem. I noticed I'm getting a good amount of lint that's making its way to the condenser coil on the upper right corner. Thankfully I can reach my hand in that area because its right there at the front. One of my buddies that has this same machine also reports the same exact issue. He's getting lint on the condenser in the same area as mine. I like my machine but it seems like the more care I'm giving it the more possible gremlins keep coming out. Nothing I can do now because I obviously own it and I can't return it after having it since June. But as much as I enjoy the unit, I don't think I would do it again knowing what I now know. The machine seems like it has several things that are going against it in term of things that can and probably will shorten its life span.

Started 20 years ago in my ventless condo with a small, European-sized combo, which was painful. Them graduated to the large LG combo which is much, much better but still has some deficiencies. This will be a step up to bring back to laundry taking the time it did in my childhood! Thanks GE. And, it's efficient, which is likely better for the environment. I'm woke! 🤪🙃🥴 And, while I love Korea and LG products, I'm very happy to buy an American brand.

Function, Drain All Water: Is there a setting that will drain all existing water in the loop (machine/pump). If this function exists, this will help prepare for freezing temperatures coupled with power outages/transport/storage. Freezing Temperatures: More often, we are seeing freezing temperatures for an extended period of time, coupled with power outages = frozen pipes (and by proxy water filled loops/machines). Winterize: It would be nice to be able to fully winterize this unit prior to the arrival of the arctic fronts we are seeing more of these days. Great review and follow up, very much appreciated.

Two month owner here. An 8 year old boy was so excited about my new high tech washer/dryer that he talked his mom into bringing him over so he could see it. Seems he wrote a paper about these machines in class but had never seen one. Anyway....I can't get the fabric softener to work. I have FS in both the Auto and the Manual dispense cups because I didn't think it was working. The amount in the cups has remained the same after multiple washings. I have adjusted the Smart-Dispense Selection from Low to High, turned it off, and turned it on. Nothing happens. What am I doing wrong? Is there a plug in the back of the dispense cup that I am supposed to remove or something? I have read the manual over and over.....

Those bars for detergent and fabric softener does NOT tell you how much detergent is left. It’s your setting for less, auto, or More detergent. Right now you have it set to 3 bars so its using more

you can turn off the fabric softener to where it wont bug you about it

I bought one as well and really like it so far.

We don't use fabric softener, so we just filled the fabric softener dispenser with water. Now we don't get a reminder to add fabric softener. :)

We have this combo, and from the start it has made a loud rapping noise during the spin cycle. None of the fixes in the manual to deal with noise work, and with the laundry door closed it sounds like there is a jackhammer in there from the rest of the house. Two different techs have been out to look at it, and (though they have very little experience with this unit) they both agreed that the noise is abnormal. GE Appliances headquarters, however, said that as long as it is washing and drying clothes, they will do nothing about the noise it is making. This was after we sent them a video showing how bad it is. When I called the customer support line to talk about this issue, they promised that a customer care rep would call me back in a few minutes. That was 4 days ago, and still no call. One might expect that they are hoping that whatever is wrong inside the machine won't become a major issue until the warranty runs out. I have registered a complaint with the BBB, which they have accepted and delivered to GE Appliances in Kentucky.

My question about this is.. when you dry clothes in a normal dryer, yes you get lint in the trap but so much more going out the vent. Where does the extra lint go? Does it end up inside the dryer?

Maybe you can try putting water in the fabric softener dispenser to avoid the warning? Or a laundry rinse like Odoban.

If it breaks down you can’t wash that’s the bad part! If I have them separate and the dryer breaks down at least I can wash

Wish it was available in Canada.

We just bought this, we also only use cold water using an O3 to clean with.

Hi, I am totally blind so would not be able to use the touch screen on the unit. However, if I can control it completely with my phone, I would be able to do that. Can you tell me if the app allows complete control of all features and cycles? Would I be able to start or stop the machine with the app?

The main Problem is the the ventless. If they made it with an actual vent, it would work. It never dries the load completely and it takes foreeever, plus the filter gets cloged alllll the time. There is a reason why this doesn't sell

You said you have not had to refill your fabric softener in 6 months. My detergent and softener has not gone down in 6 months either. I don't think they are being used. So I just started adding the Detergent sheets in the machine with the clothes, just to make sure they are washed with detergent.

My first time to used from cero to finish

It’s hard to get the lint off the fins inside

First time viewer. I'm in the market for a new washer. I currently have GE Profile, 14 yrs old and leaking horribly. The machine in vid, AMAZING. Can it wash a king-sized comforter? (Hope so) Hoping to afford to buy in future.😊

Ron Popeil..."Set it and forget it"😉

I have an old traditional washer and dryer (15+ years). I have been looking to upgrade to a front loading set when I came across the all-in-one units. I've been doing research regarding these units, and your video was extremely helpful! Thank you so much!! I do have a question, for you or any of your viewers that has experience with this unit. I have a Husky and am worried about the lint trap working properly and catching all the hair. She is a heavy shedder. Can anyone give me any insight? Another question is I use the scent booster beads that I see you also utilize. Do you just put those in the drum with the laundry before starting as you do in regular washers?

If you hold down wrinkle care button you can keep light on

Great video and a little slow at first getting to the point but the information is detailed and exceptional. I just picked one up yesterday based on yours and others reviews (by the way this video was not an actual review, pros/cons) and it is strapped down in the back of my pickup waiting to get it moved to our storage. New house is being built and ready in March so two mores for this heavy beast.

Thanks for the review. I was wondering about the electricity consumption, I can’t believe how much cheaper it is to run. I live in an area that electricity is 4x the national average. So sounds like it $100 a year, for me. That would be amazing. Now, no gas dryer for me.

Hey I would build sturdy platform. LG just released their version. I would go with GE model after reviewing both. Nice tutorial

Mine stopped drying after 5 months of use. And yes, it has been well maintained doing all needed cleanings. First tech came out and could not fix it. Now waiting another week for two techs to come out so they can open the unit. Yes, it requires two techs to open it up. Why did GE not send out two techs the first visit!. By the time they fix or replace this thing I will not have a dryer for 3 weeks at this rate. You should either own two of these or none of these things.

yeh that slightly damp feeling really threw me for a loop i didn't know you can make it dry by shaking it a bit. Thanks for the info. I like it alot myself, destroyed my shorts because I forgot about the temp option, it was on hot T_T

i wish they would stand behind the machine and put a real warranty on it.

had one for a month. it imparts a burnt diesel smell to the clothes during the drying cycle, from the compressor coils.. if your odor sensitive or have allergies, it will make you sick.

Just got mine installed today and on the 16” pedestal….its rocking and a rolling and I don’t like it!! Gonna have to figure it out or it’s going back. The pedestal, not the machine….yet…

I ❤mine. It’s wonderful. I wipe it out after every completed load. Well worth it!! ❤❤❤

Great video Matt!

I love this machine and even more so with the 7 inch tall pedestal. It is so worth it even without a drawer.

Unfortunately, my experience has been bad. Bought the combo 8 months ago and I'm on my 5th technician visit. The major repairs have involved a motherboard replacement due to the machine going dead. Next, the entire heat pump assembly failed. The product is so new the technicians have never seen it or been trained on it. Keep in mind, the 10 year limited warranty only covers the motor. There is only a 1 year warranty on the rest of the parts such as the motherboard and heat pump.

One month in from purchasing a GEAll in one machine. Noticing a quite a bit of dripping from the top of the liner on the door , when pulling out dry clothes Anyone else?

Thanks for the great review(s). I'm on the verge of buying. Don't know if you can answer this: does unit work with laundry detergent sheets (e.g. Earth Breeze)? Thanks

Unit causes serious hammer when cycles start up. This will eventually break the fittings on you pipes and may causes a leak or flood. GE is no help at all and will refer to a third party vendor who are unfamiliar with this product because it is so new to the market. Also be aware that the spin cycles will cause the unit to shake badly if there is a large load like towels. The unit also does not discharge all the bleach if you add to a specific cycle. This leaves bleach in the dispenser so if your doing colors after whites keep your fingers crossed that your colored cloths do not get bleach dispensed on the load.

How can I put in automatic all I I need some ting to show me how to used thanks

They have a higher drawer like pedestal now.

I had a leak in the bottom of one of my large All Free containers and figured out that there was a baseboard nail head that stuck out just enough to puncture the container. YMMV

HELP!! got the new matching today and I dont trust the pedestal…it’s rocking and a rolling!

Thank you

Mine shakes like crazy. Smaller items like socks gets stuck in the blue and don't fully dry

Have you had any problems where the drier gets stuck on load sensing and keeps going? I’ve also had it freeze once where I couldn’t unlock the door. Had to unplug the machine and plug it back in to reset it

Also 7in pedestal

My question how I put automatic deterge t

I used for almost year and not problem but yesterday after towels cicle . Have error 18 and said some clogger drain filter I open but not fine much

I've never have luck with the sensor dry. I just use the time dry at 2 hours. Works every time

Pedestal is 7 inches

This has been called the Tesla of washer/dryers. Have there been software updates and what changes have the updates made?

Everything still good with this unit? I’m looking to purchase one

I'm curious. we like the smell good laundry beads. How could we use those? Not sure if thats possible or not

I hate how water always drips when you open the door after the dry cycle. Also, I hate how wash clothes cling to the side and get stiff on the dry cycle.

That's amazing, I love it ❤

Great Video. Can you soak Whites in this machine with Oxy-Powder?

What happens if you just fill the fabric softener dispenser with just water? I don't use softener either and I was thinking that it what I would do.

Hello Matt, are you getting any Lint Buildup on the Coil or to the Left of the Filter housing?

I love mine

How do you scan your detergent in the app like you said?

Anyone here having a hard time cleaning the excess lint inside the machine? When I pull the lint trap out and look in with a flash light I find that there is lint build up on the coils and on the area where the lint first comes into that chamber.

Is lint getting on the coils?

I have to get mying to be serviced tomorrow its coming up an error 353 and ive been having so many problems

i have an issue i hope someone can help with, i have to turn the machine off and on 3 times to get it start, any help

Great video

Please let me see the inside of the coils

what about the heat pump coil getting clogged with lint.

Is your dog a black lab?

Mine arrived Broken!!!! Never used it once. Code reads "Door not Closed". GE has attempted 2 repairs allready and now report parts are unavailable. Customer service very poor and unhelpful. AVOID!!!!!!!! Their solution is to offer me money for the Laundromat with no timeline for repair.

How much does it cost?

I got combo for bday I don't know how to work dryer

We do too much laundry to only use one machine. We need a washer and a dryer. At least one pair

Does anyone know if ge releases its products in australia?

Can you use detergent pods instead of liquid. I still have a lot of pods leftover and I’m getting my washer/dryer delivered today!

My wife and I were considering a heat pump combo unit. Anyone able to say if the spin cycle is harsher or softer than a typical front loader? Looking to place it on the 2nd floor of a 100 year old home, and never felt comfortable with a front loader pair shaking so close to the roof and older joists that would be very loud.

I have had the machine for a couple months and the lint filter is so bad, if you look down the lint opening and there is lint stuck in the back and on the heat pump grill.

Can the detergent pods be used in it ? I bought one for my new home and we just moved in and haven’t used it yet.

I use the tide pods - how/where would i use them with this machine?

I’ve heard that there is an issue with lint buildup in the machine that affects the drying. Have you seen this? Love the video.

Hi Matthew. Where did you see this machine for 2000 dollars?

Can you add any clothing after you start as a feature in some new units?

I bought mine last July, and I absolutely HATE IT. The dryer does not work very well, it never gets laundry dry, always leaves it damp and horribly wrinkled, even after another dry cycle. Doesn’t matter if it's on sensor or timed dry. Static electricity in clothing is AWFUL! Machine always dumps at least a cup of water on clothing when you open the door. Every single time. So much for dry clothes 😡. We have dogs, so lots of pet hair. A SMALL quarter sized lump of hair in the pump drain stopped the maching from working. I still don't understand that one. If we hadn't paid so much for this piece of crap, I would haul it to the nearest garbage dump so it would be where it belongs! Worst purchase ever! Great idea, but the product does NOT live up to the hype.

Why is nobody talking about the major concerns with this washing machine not drying properly because it has a problem with the lint? Hundreds of complaints for its $3,000 machine