Gear Ratios Explained For Triathlon | Choosing The Right Cassette, Chainrings & Shifters

Рет қаралды 164,161

6 жыл бұрын

The gearing you have on your bike is such an important factor when it comes to improving your performance and your enjoyment, yet it’s possibly one of the most commonly forgotten things. So, let’s take a look at the gearing you should choose for a triathlon?
Subscribe to GTN: gtn.io/SubscribetoGTN
Check out the GTN Shop: gtn.io/6L
In association with Shimano.
Gears really do have a huge impact on our riding. Gears that are too low, or too easy, may leave you spinning out, wishing you had a couple of harder gears. Whilst, gears that are too high, may bring you to a grinding halt on a steep climb.
Firstly you have the chainset. Simply put the lower the number of teeth on the chainrings the easier the gear. So, there are a few common options with these. There is the standard, with a 53t outer ring, and a 39t inner ring. You also have the semi-compact, that has slightly easier gears, with a 52t outer ring, and a 36t inner ring. Then you have the compact, that is even easier again, with a 50t outer ring, and 34t inner ring.
The other area you can customise your gear ratios is with your cassette. It sort of allows you to fine tune and optimise your gear selection and you’re not short of options either. Shimano cassettes come in a number of ratios including 11-25T, 11-28T, 11-30T, 11-32T, 12-25T, 14-28T! Whereas a larger number on the chainset means harder gears, on the cassette a larger number actually means easier gears. So, for example, I have quite a nice range on my bike as it goes from 11 teeth on the smallest sprocket, up to 30 teeth on the largest. So, it’s very well suited to a hilly terrain because I have a range up to 30 teeth.
There are so many options when it comes to gear ratios but we hope this video helped you to understand what is available. If you found it useful, don't forget to give it a thumbs up and share with your triathlon and cycling friends 👍
If you'd like to contribute captions and video info in your language, here's the link 👍 gtn.io/6M
Watch more on GTN...
📹 How To Bike Like A Pro - gtn.io/BikePro
📹 What Is The Optimal Cadence To Run Fast Off The Bike? - gtn.io/OptimalCadence
The Global Triathlon Network (GTN) is the best triathlon KZfaq channel, with videos for anyone who loves triathlon: from seasoned Ironman racers to first timers - and everyone in between.
With the help of our pro and Olympic medal winning team, we’re here to inform, entertain and inspire you to become a better triathlete; including videos on:
How to swim, bike, and run faster with expert knowledge
Beat your PB with record-breaking expertise
Get the best from your bike and gear with pro know-how
In-depth, entertaining features from the heart of the sport
Chat, opinion and interact with us across the channel and on social media every week
Join us on KZfaq’s best triathlon channel to get closer to the sport and to become a better, faster and fitter triathlete.
Welcome to the Global Triathlon Network.
Thanks to our sponsors:
Cervelo bikes: gtn.io/cervelo
BMC Switzerland: gtn.io/bmc-bikes
ON Running: gtn.io/On-Running
Assos of Switzerland clothing: gtn.io/Assos
KASK helmets: gtn.io/kask
Park Tool: gtn.io/parktool
Profile Design: gtn.io/profiledesign
Zipp wheels: gtn.io/zipp
ENVE wheels: gtn.io/ENVE-wheels
Quarq powermeters: gtn.io/quarq
Polar: gtn.io/polar
Vision wheels: gtn.io/vision
Continental: gtn.io/continental
Team Bath: gtn.io/TeamBath
KZfaq Channel - gtn.io/KZfaq
Facebook - gtn.io/Facebook
Instagram - gtn.io/Instagram
Twitter - gtn.io/Twitter
Google+ - gtn.io/GooglePlus
Strava Club - gtn.io/stravaclub
GMBN Tech - gmbn.tech/subscribe
GCN Tech - gcntech.co/subscribe
EMBN - embn.me/subscribe

Пікірлер: 86

@TiberiusPaulSavu 6 жыл бұрын

What always helps my friends who aren't into bikes understand gear ratios is when I explain that we're actually talking about a ratio. For example, on a compact, 36-tooth chainring, 18-tooth cassette cog means you'll spin your legs once, while the wheel spins twice. On a superhuman 55-tooth chainring, and an 11-tooth cog, you spin your legs once, while the wheel spins 5 times. Bring cadence into it and it all makes sense as to how it translates into speed. That's just my gear ratio 101 way of explaining things to bike newbies (not that I'm not a tri newbie myself).

@ironmantooltime 6 жыл бұрын

Tiberius Paul Savu that's really clear 😊... And I'm not a newb either 👍

@McStoolio 6 жыл бұрын

Love watching these clips - good memories of Lanzarote.

@gtn 6 жыл бұрын

Where is your favourite spot out there?

@finemessugotmein 5 жыл бұрын

explained so well ... thank you.

@lindatodd1211 6 жыл бұрын

Thanks for explaining the chainrings and gear ratios, it always been something I have never quite taken the time to fully understand and it is not that complicated is it! It is a shame the pricing of Di2 tends to add 1k to the price of a bike, I just could not justify it when I bought my TT bike. I hired a road bike in Lanzarote last year which had Di2 and I loved it.

@xGshikamaru 6 жыл бұрын

I need to confess: I use a triple chainring on all my bikes. With a 30teeth chainring I don't need to worry about any climb even if I bonk, with a 53 chainring I can go faster while descending. I chuckle when people talk about 1x drivetrains, as if having a 1x would save you 50W... Electronic gears may be nice but they are massively overpriced. 1 SRAM Red eTap or Dura-ace DI2 groupset costs as much as all my bikes combined, and I'm not even talking about Campy EPS groupsets. Just the bar-end shifters cost you an arm...

@AdrienFloor 4 жыл бұрын

Thank you, that was very interesting !

@Sanko1960 3 жыл бұрын

Very helpful. Thank you!

@edparry4656 3 жыл бұрын

Better explanation than GCN! Many thanks

@simonmoran6009 3 жыл бұрын

Super well impressed 👌💯

@elirocha8548 9 ай бұрын

Installation was quick and easy. It doesn't make a whole lot of noise, and it's worth every cent.

@Motorsportsgeek 3 жыл бұрын

53/39 with 11-34, best of both worlds

@BikeBodyMind 6 жыл бұрын

Been seeing some road bikes lately with clip on aero bars and Sram Red blips on them. Seems like a good idea for people who don't (or can't) get a full on tri bike.

@JustinDoesTriathlon 6 жыл бұрын

Yeah, I guess if you've already got an eTap roadie, that makes a bunch of sense. If you take price out of the factor, that's always been a big complaint about roadies with aerobars. It felt like such a terrible compromise to always have to get out of aero to shift. That was one of my big complaints when I used aerobars.

@nootnoot1463 6 жыл бұрын

Aero bars on my road bike feel good for everything except sprinting

@toddholmes1719 6 жыл бұрын

When discussing cassette and chainring sizes, you snuck in an important point: “provided they are compatible”. It might take another full video to explain what derailleurs (and chains) are compatible with the various options. Or just go to your trusty compatriots on GCN. 😀

@Froxdj 3 жыл бұрын

Hey buddy loving the videos, need you help though on cassette's and teeth, currently have Dura Ace 10 speed rear cassette CS7800 11-23 (chain and cassette are brand new), I have recently bought some training wheels which needs a cassette. Ideally I want to keep the same chain and change out my wheels when racing and climbing/ short distances. So I will get a 10 speed cassette but should the same amount of teeth be the same as my current cassette 11-23? I know more teeth make it easier to climb but don't want to change the chain and chain length and mess about when all I want to do is swap out the wheels., any help would be much appreciated.

@krishnansrinivasan830 Жыл бұрын

Awesome & Thanks :)

@michaelcloherty5352 4 жыл бұрын

I have a 39 50 with a 40 cassette with a road link have all the gears i need easy downhill easy on the flat

@elirocha8548 10 ай бұрын

Nice bike and pleased overall

@julianengel492 2 жыл бұрын

Maybe it would be worth highlighting that a compact crankset would not be compatible with more teeth and that it is important to look for the bolt circle diameter (BCD) to ensure you got the right fit.

@edwinkarani5593 4 жыл бұрын

Thanks alot.

@buildsexualarousaldefeatth6313 4 жыл бұрын

I want change my mountain bike chainring for more speed, what should I do?

@solefreak2 3 жыл бұрын

So how would a 48/32t chainring fair out on the road in comparison to these bigger chainrings?

@jason_woodbury 6 жыл бұрын

When switching chainrings and/or cassettes, do you have to be thinking about he length of your chain needing to be adjusted as well?

@someguy9520 6 жыл бұрын

not really, as long as the teeth diffrence isn't all that long. like maybe 50 to 56t chainring where ya might think about adding 2-3 link

@markthrelfall3577 6 жыл бұрын

It depends on the change in ratio. You'll normally need to change the chain length a little. The other bit to check is the b-limit screw when you're changing your cassette

@johnbouttell5827 6 жыл бұрын

In the 2014 Tour de France, Tony Martin used a 58 chainring to win the 54 km TT by 1:49; mind you, you've got to be able to turn a 58 chainring. Easier said than done.

@ironmantooltime 6 жыл бұрын

John Bicycle you can turn it, but good luck doing so on anything above a 20 on the cassette 😁

@someguy9520 6 жыл бұрын

i use a 56t. its not hard. with the right gear in the back its....just normal. but it's quite challenging even on small inclines

@TheTonicro 6 жыл бұрын

i dont think he ever went to 58*11, its more that he can keep the chain in the middle of cassette because of efficiency

@someguy9520 6 жыл бұрын

thats also the reason why i changed to such a big chainring. Chain is right in the middle of the cassette since im quite a weak rider and like to spin

@natefdot 6 жыл бұрын

What is your Opinion on 1x gearing for road bikes? IS it the future? I personally could see it sweeping through Draft legal Triathlon within the next few years. Im considering going 1x on my road bike.

@Ma_Ba Жыл бұрын

I watche yt channel Path Less Pedaled on down side of 1X's. My punny analogy : It is like having to flip through all the songs on the old tape cassettes instead of being able to lift the needle to a different track on vinyl record.

@isaacyoung1868 6 жыл бұрын

heard this same speech before.. how many triathletes switch chainsets or cassettes depending on the race? honestly i'm not in that category..

@michaelcloherty5352 3 жыл бұрын

Maybe swartzenager might push a 55 crank and a 11 cog but who wants to be swartzenager

@lukaug 2 жыл бұрын

Good stuff, thanks ;) For the cassette 11-30 you use SS (short cage) or SG (mid cage) swap?

@ADY_SR 4 жыл бұрын

53T - 11.25

@phxrsx 6 жыл бұрын

Compact crank with a 11-28 on the back is fine for 90% of age groupers.

@MiniFun92 6 жыл бұрын

i use 39 alot.. its almoast all i need.. for now.. 39 11 thats prity strong

@philipmwangi5270 5 жыл бұрын

where can i buy a 54 chainrig?

@IsmaelDiazIAGoupeFinancier 3 жыл бұрын

Question for you guys ... does the number of tooth change the length of my chain. Let's say I've got right now a cassette 10 speeds and 11-28 and I wanna change for a 10 speed but 11-25. Will my chain need to be change too ?

@tombobb 3 жыл бұрын

not unless it is a very big difference. I just put a 13-34 freewheel on the back instead of the 14-28 and it worked. Had to adjust the "b" screw on the derailleur though.

@macbrown768 6 жыл бұрын

How about a Otillo show or two? I know a rookie looking to do one this year.

@markthrelfall3577 6 жыл бұрын

Stay tuned :) I've got loads coming

@chefroadman9301 3 жыл бұрын

Need help which is the best choice for my bike i used 53/39 chainring, 11-34 or 11-28t sprocket?

@lucaslonghurst 3 жыл бұрын

All depends on your use. If you live somewhere flat go 28, more hills/mountains go for the 34

@georgejgilles.3999 5 жыл бұрын

Chapeau

@clydeparamio615 Жыл бұрын

Is it ok to use 53/39 to 11-36t casette?

@alanbayliss4853 6 жыл бұрын

Might have been good to point out that with cassettes with 30+ teeth sprockets you will need a medium cage rear mech to cope with their size (as opposed to the short cage which most bikes seem to come with).

@someguy9520 6 жыл бұрын

don't think so. my entry level roadbike came with a short cage Sora 9spd rear mech and a 11-25t cassette. Slapped on a 1,8mm spacer and my old 11-32t cassette from my MTB. Worked just fine, without adjusting B-Tensions or anything at all. 25% gradients are now so mch easier

@alanbayliss4853 6 жыл бұрын

As you say, a spacer works too. I was just pointing out that there was a bit more to it.

@someguy9520 6 жыл бұрын

uhm, i don't think that the spacer would make a diffrence compared to the cage. I use it simply because MTB cassettes normally don't work with road mechs except you use 11spd ones(afaik). You would have to use the spacer anyways if you wanted to use MTB cassettes no matter which cage length

@alanbayliss4853 6 жыл бұрын

Ah, think we are talking at cross purposes. I thought you meant a rear mech hanger extension that would allow you to use a larger cassette.

@someguy9520 6 жыл бұрын

oh, you mean that one. Never thought about that, but would surely be cost efficicent compared to a whole new mech. I actually saw one guy literally use a long cage from the parts bin and put it on his current mech. Worked just fine

@sesarman 4 жыл бұрын

I'm trying to switch from a triple setup on my current bike, would I need to change the cassette also along with the chainrings and front derailer? Is there a way to know which parts are compatible to one another? Or is it that all different rear and front setups can sync with one another with proper tuning?

@shanetrimble1458 4 жыл бұрын

Is it Shimano? If so they have compatibility charts on their website. Pretty handy. You may get away with mixing and matching certain parts, but it could be messy. Any more details on your current groupset?

@sesarman 4 жыл бұрын

@@shanetrimble1458 thanks for the response, ended up selling that setup at record speed and went with an r8000 build, so problem solved 🙏

@shanetrimble1458 4 жыл бұрын

@@sesarman Brilliant! You won't look back, R8000 is amazing.

@Northwindbreeze 5 жыл бұрын

Are you driving by a lawnmower at 4:50 mate?

@joemarguevarra496 3 жыл бұрын

Does short cage derailleur will fit on 52/36 and 11/30 cassette? Thanks

@muhammadathallahadriansyah6773 3 жыл бұрын

yes it does

@realesride4975 2 жыл бұрын

@@muhammadathallahadriansyah6773 this 52/36 with 11-30t is it good for climbing?

@realesride4975 2 жыл бұрын

@@muhammadathallahadriansyah6773 I hope you notice and responce my question

@emilram 5 жыл бұрын

What is all this improvement do for the non professional rider?

@uvwuvw-ol3fg 4 жыл бұрын

Non-professional riders may need all in one wide range transmission with narrow steps like half-step gearing if the chainring is restricted.

@theylivewesee1674 6 жыл бұрын

1x for triathlon??

@someguy9520 6 жыл бұрын

i use it. 56t oval with a 12-23t 11spd cassette. gives me the smallest jumps i will need on a flat course

@ozan3076 6 жыл бұрын

Dont you need to change chain?

@markthrelfall3577 6 жыл бұрын

Yes, normally you'll need to change. It does depend on how large the ratio change is

@yhcha79 6 жыл бұрын

sorry, even from 11-28 to 11-25?

@yolo2948 5 жыл бұрын

No need if in a same speed

@jason200912 Жыл бұрын

Always go large teeth in the front and large teeth in the back. Don't go compact in the front.

@kakablee 7 ай бұрын

For flat land... 11-25T is best

@mrenovatio3739 4 жыл бұрын

Eventually they'll sell automatic gears... +motor +airbags +side seat + roof for the rain + doors for privacy and we'll end up driving cars...

@ooldmka 5 жыл бұрын

having a 46 in the front is not that bad for hills

@hyakkimarufluff534 5 жыл бұрын

My overlly competetive friend doesnt understand gear ratios,he was using a bigger gear at the cassete and the smallest chainring on my 3x7 mtb with 20t or less teeth and is fuming mad at me after losing at a kid using a bmx

@jeanmorin3247 4 жыл бұрын

Everything that is being said here is just hogwash with the aim of selling more gears. If someone explained the business in clear terms of English-inch system, it would become quite obvious that the larger gear, whether 53, 52, or 50, is just not used in climbing. The whole conversation here is not about that one. What is used by this rider is only the second smaller chainring. A 39-tooth chainring used with a 25-tooth back gear gives you a 42-inch ratio. A 34 chainring used with a 32 gear gives you 29 inch. Thirty inch is like walking beside your bike. 70-inch is the standard ratio of simple one-speed bikes, perfect to go to the corner store for milk and bread in the basket. 100-inch is too high for level road; anything above 100-inch (100-130) is for downhill speed. 44-inch is then stiffer than 29-inch, indeed, in climbing hills, but that may be good for you and not for your friend. What will determine what you really need is your level of fitness and experience. No good biker will need a granny ratios in the 30-inch range in any hill, but an unexperienced or unfit biker will be very glad to have one in a steep incline. Any explanation of gear fit without the very simple English inch system is usually muddled and confused, as here, and not very helpful. (It can be done with centimeter, but the 75-250-cm scale does not have the elegance and simplicity of the English 30-100-inch scale). The formula is simple: diameter of wheel in inches multipled by ratio of chainring over gear. Example: 27inch X 34/32= 28.8 inch. Keeping a handy little table of all the gear-inch combination that your bike can give you will reveal clearly what your gearing can and cannot do for you. You can learn it by heart. It will also make it easier to identify where the bridge comes to change chainring and gear simultaneously (one up-two down, or one down-three-up). With a bit of experience with this beautiful system, your own gears will become very familiar and you will know them all by their own name. 107 is Charlotte and she means business! 55 is Marty and he sweats a lot. Cheers!

@sdqsdq6274 3 жыл бұрын

so which set which the best for speed and climbs ?

@lucilledadang1989 3 жыл бұрын

Absolute rubbish. "Spinning out"? You'd have to be going 65+km/h in a 50 tooth at 90 rpm. It only matters going down a hill. Tye length of your cranks are also important.

@Ma_Ba Жыл бұрын

I am reading this as I look for a second bike. 64 year old woman with thunder thighs and decades of commuting. I spin out on a 3x9 old dura ace touring bike with rear panniers on flat road. It's cassette is 11-32 and biggest ring is only 48. I only want chromoly upright to have my second bike work differently. Looking at a 2x8 with 11-32 cassette standard with 48/34. The shop agreed to same price with a 50/39 to accomodate me, but I am all jittery that I am courting chain falling off getting stuck or not being able to get up some hills, but not using in mountains. Any crowd sourcing opinions appreciated. The bike is on sale 15% off through Thursday, so I am studying you tube. ( It is a pre-order, so I cannot test ride. The frame is retro styled chromoly with a rake on the fork I love.)