Gear Rules: find more speed

  Рет қаралды 8,989

Kart 6T3_Ben

Kart 6T3_Ben

Жыл бұрын

#karting #kartracing #gearrule
You can find me:
/ @kart6t3_ben
Facebook:
/ kart6t3
Email:
Kart6t3@gmail.com
Equipment:
iPhone 12 Pro
GoPro hero8
Lapel mic
Sponsors:
Aratari Auto Color and Detail
aratariautofinishers.com
Fuel Clothing
fuelclothing.com
Beard Octane, code: Ben10 10% off
www.beardoctane.com/?rfsn=440...

Пікірлер: 28
@privatedata665
@privatedata665 7 ай бұрын
I like your content , thanks . I was neighbors with a kart family and Dad kept impeccable notes for every race night and every change made ...everything . Bill (dad) paid extreme attention to tire pressure all night long . Tire pressure and tire temperature before and AFTER track time/laps . When this family showed up and you wanted to beat them , you may as well put your kart back in the trailer or just consider the laps that night as practice . Bill showed us many many times that once your kart is dialed in, minute changes in tire pressure resulted in even faster laps . This goes back to the very old saying , everything your car/kart does , it does through the tires .
@kart6t3_ben
@kart6t3_ben 7 ай бұрын
That’s a great saying. And thanks for watching.
@charlesdonovan4234
@charlesdonovan4234 Жыл бұрын
Great job, answered questions I did not completely understand. That's
@kart6t3_ben
@kart6t3_ben Жыл бұрын
👍
@Mahatheyew
@Mahatheyew 15 күн бұрын
I use a tilted engine mount, the top of my front sprocket is pretty much in line with the top of my rear sprocket. Is it true this may create bind/loss of power out of corners? I read that the crank should ideally be the same height as the axle.
@kart6t3_ben
@kart6t3_ben 14 күн бұрын
Never looked into that. Might be some truth to it? Hard to say whether the angle axle/crank actually matters or not? Interesting.
@Mahatheyew
@Mahatheyew 14 күн бұрын
@@kart6t3_ben "The only thing about an angled mount is that it raises the engine up. Ideally the crank and the axle are the same height, the further up the crank is from the axle, the more bind you get in the chain when the kart flexes. Theoretically it robs a little power coming out of corners, or you’ll be a little more likely to throw a chain, but realistically it’s not a big deal for a KA or X30."
@davidelsts2799
@davidelsts2799 10 ай бұрын
Hey Ben. Is there a benefit to running a bigger or smaller driver gear if you are keeping the gear ratio close to the same?
@kart6t3_ben
@kart6t3_ben 10 ай бұрын
Yes! In short a bigger driver carries more speed at the end of the straight away. A smaller driver will “launch” better off turns and restarts.
@waltramar
@waltramar Жыл бұрын
Hey Ben. On longer tracks do you think to much stagger will scrub off straight away speed?
@LFR327
@LFR327 Жыл бұрын
Yes
@kart6t3_ben
@kart6t3_ben Жыл бұрын
Yes. The kart constantly pulling left is scrubbing speed off.
@MarkWilliams-lz1yc
@MarkWilliams-lz1yc Жыл бұрын
Hey Ben if I go down one tooth on my driver, how many teeth do you feel I should go down on rear gear? I would like to stay around the same rpm thanks
@kart6t3_ben
@kart6t3_ben Жыл бұрын
One driver tooth is worth 3 rear. So say a 15/57 = 16/54 like that.
@MarkWilliams-lz1yc
@MarkWilliams-lz1yc Жыл бұрын
I thought I remembered that from one of your videos but I could not find it. Thanks you keep up with the good stuff. I really enjoy your videos
@joshbollenbacher494
@joshbollenbacher494 Жыл бұрын
Hey Ben also rotating weight light weight axle titanium wheel studs and nuts I have a 25mm axle on a kid kart it came alive
@kart6t3_ben
@kart6t3_ben Жыл бұрын
Very true.
@TheNWCowboy1
@TheNWCowboy1 Жыл бұрын
Cheating is such an ugly word. I prefer 'competitive advantages'. Haha
@kart6t3_ben
@kart6t3_ben Жыл бұрын
🤣🤣🤣
@darrellkelso9915
@darrellkelso9915 Жыл бұрын
What is goin on?😂
@kart6t3_ben
@kart6t3_ben Жыл бұрын
Yup.
@darrellkelso9915
@darrellkelso9915 Жыл бұрын
Man you make the day when you post a video. Don’t change a thing.
@SimRacingVeteran
@SimRacingVeteran Жыл бұрын
Your thumbnail is really deceptive. I came here to learn about front and rear sprockets and you basically didn’t even talk about anything of the sort.
@kart6t3_ben
@kart6t3_ben Жыл бұрын
Changing the tire circumstances does effect the gearing. The concept, A larger tire in effect removes teeth and smaller adds to the rear gear. The gear reference is for those who can’t change it. Sorry.
@badgumby9544
@badgumby9544 Жыл бұрын
We didn't have any restrictions when I started racing in the Junior class. Pussification of America continues. Do you give them participation trophies as well?
@kart6t3_ben
@kart6t3_ben Жыл бұрын
Well hell man let’s put 5 year olds out there in opens, give them kids some real adversity. Ain’t nothing pussificating about slowing things down and teaching proper racing etiquette. Quite the opposite, you have multiple generations of drivers that would rather drive through someone rather then around.
@jeremyhyche-jordan666
@jeremyhyche-jordan666 4 ай бұрын
Sprocket size for back sprocket on Gx390 for adults
@kart6t3_ben
@kart6t3_ben 4 ай бұрын
That would be track and rpm dependent so very hard to guess what you need. My only point of reference would be a 10/58 at a small 10th mile 8600 on a clone.
5 Adjustments For New Karters
16:16
Kart 6T3_Ben
Рет қаралды 6 М.
How to Build a Competitive Kart Racing Engine (Stock Appearing)
43:35
Something About Making
Рет қаралды 2,7 МЛН
КАК ДУМАЕТЕ КТО ВЫЙГРАЕТ😂
00:29
МЯТНАЯ ФАНТА
Рет қаралды 10 МЛН
Heartwarming Unity at School Event #shorts
00:19
Fabiosa Stories
Рет қаралды 25 МЛН
Amazing weight loss transformation !! 😱😱
00:24
Tibo InShape
Рет қаралды 66 МЛН
Jumping off balcony pulls her tooth! 🫣🦷
01:00
Justin Flom
Рет қаралды 28 МЛН
How to Gears part:1 (Driver & Axle Gear)
8:39
KartSpeed Solutions
Рет қаралды 2,6 М.
Racing 3 Disc Clutch Vs Drum Clutch
18:11
Red Beard's Garage
Рет қаралды 32 М.
Getting started in karting
14:32
Kart 6T3_Ben
Рет қаралды 1,9 М.
Kart Racing Is Way More Complicated Than You Think
13:38
SuperfastMatt
Рет қаралды 321 М.
Tire Prep Program : Track Tac Tire Treatments
30:11
Kart 6T3_Ben
Рет қаралды 13 М.
5 Essential Go Kart Mods for MORE POWER!
16:17
CarsandCameras
Рет қаралды 311 М.
I tested Formula 1’s First KART Track (Does it suck?)
20:24
Cameron Das Racing
Рет қаралды 1,1 МЛН
Clutch Maintenance, Adjustments, and Performance
15:58
KartSpeed Solutions
Рет қаралды 6 М.
小丑与白天使遇见丧尸?#short #angel #clown
0:32
Super Beauty team
Рет қаралды 26 МЛН
Ах как прекрасно
0:17
Флюр Хафизов
Рет қаралды 29 МЛН
头还可以刷卡买东西的吗?#海贼王#路飞
0:26
路飞与唐舞桐
Рет қаралды 21 МЛН
❗️XOTINI HAMMASINI URMOQCHI 😱😱😱
0:14
HUSAN_SHORTS1
Рет қаралды 3 МЛН
Они так быстро убрались!
1:00
Аришнев
Рет қаралды 2,2 МЛН