Lian Li Galahad II / GA II LCD: Definitive SETUP & INSTALL GUIDE

No video

Lian Li Galahad II / GA II LCD: Definitive SETUP & INSTALL GUIDE

Рет қаралды 95,641

Күн бұрын

In this episode I'm going to show you how properly install, wire and setup your brand new Lian Li Galahad II LCD!
Infinity Unifan Guide: • HOW TO Lian Li UNIFAN ...
Unifan Guide: • HOW TO Lian Li UNIFAN ...
Chapters
00:00 - Chef Nick is cookin!
00:21 - Quickly answering your questions
01:05 - What you get in the box
02:58 - Intel Installation
03:39 - AMD Installation
04:27 - Differences between AMD & Intel
04:41 - Mounting the radiator
05:42 - Mounting the cooler
06:37 - Wiring
09:34 - Optional Steps
09:57 - Software Setup Guide
16:14 - What's your favorite thing about this new cooler?

Пікірлер: 224

@dtantsikian 9 ай бұрын

Amazing guide as always! I just installed this AIO into my system a few days ago, and one thing worth noting is that the USB-C cable going into the pump block requires an extraordinary amount of force to be fully inserted. When I first booted up my system the screen and ARGB strips kept turning off after a few seconds and I thought I had a faulty unit. Turns out you just need to push the cable in with A LOT of force for it to click into place. Hope this helps anyone else that may run into the same issue.

@GearSeekers 9 ай бұрын

I'm going to pin this one. I did notice that but forgot to mention it in the voiceover :)

@mualan4683 9 ай бұрын

no wonder people complain the unit did not work.

@EAprima 9 ай бұрын

" extraordinary amount of force to be fully inserted." ABSOLUTELY CORRECT. I went through ALOT of headache becaue of this. YOu have to push enough until you hear/feel a CLICK. When you feel that, it means it's finally connected. ALSO. Word of warning. LConnect 3 software that is use to control the AIO, LCD and aRBGs, does NOT like iCue, Asus Crate and the Fusion RGB. I am yet to find a software that I can use to control the lights on my Consair memory cards and my Consair K70 motherboard because the Lconnect cannot control them. It's horrible in that regard. LASTLY. IF you are planning to use additional Fininity fans, you MUST double check that you have more than TWO USB2 motherboard ports. If you do not have more than do then you need to buy a internal USB2 hub such as NZXT Internal USB 2 hub. Buy that additionally and you'll be golden.

@hypnoticbud1426 9 ай бұрын

This is 100% needed to be said with the instructions for sure. Thank you!

@johnnyklassicz 6 ай бұрын

Thanks god I came to the comments🙏

@Russy76 9 ай бұрын

Great video as usual. Completely unrelated, my kids heard me watching one of your videos the other day and asked me "What episode of Bluey are you watching dad?"...it took them a second to realize that you weren't Bluey's dad, but now they want to watch with me to hear your voice. Next generation of Gearseekers loading!!

@KlaireGearSeekers 9 ай бұрын

Hahah that's amazing!

@DJaquithFL 9 ай бұрын

RGB Tutorial .. you need to do a hand holding RGB tutorial using all sorts of different fans, RAM, motherboards, cases, GPUs, water blocks, etc. LED RGB setup and configuration video. I'm an experienced builder and every RGB setup at best is a nightmare to take care of. Often I find myself having to reinstall windows from all the weird conflicts from RGB software.

@octojuice6969 2 ай бұрын

Really excellent guide. I'm doing my first PC build and this cooler and other Infinity fans are my last step. You showed me everything I need to know to get my rig in action. Thank you.

@ronaldgutman5980 5 ай бұрын

Nick, probably the best video I've seen yet on this AIO. THANK YOU!

@richdelmazzio9890 9 ай бұрын

This one should be a winner for the channel. Great video! The community needs this goodness

@el_yatch 5 ай бұрын

Great tutorial man! All the camera angles are A+

@vascovalente3929 9 ай бұрын

Fantástic Nick…loved the videos about the fractal terra…you gave all the calls about the problems I could find and between you and GN i managed to have a great build made…keep the good work …and the sense of humor.

@orhei9253 6 ай бұрын

You're a god for this detailed guide. I'm new to building pc's and this is exactly what I needed - thanks so much!

@haies09 7 ай бұрын

What’s the other connector on the pump for? The one below the C port

@davefellows 2 ай бұрын

I think that's if you've bought the unit with the regular fans, not the infinity ones.

@KarthikSankaran 9 ай бұрын

Gotta love this guy's sense of humor 😂

@thatrealsquezyboy7226 27 күн бұрын

Unbelievably helpful video, this is awesome 👏

@aelaan12 9 ай бұрын

Love these videos Chef, those fans were still raw, slow simmer for 4 hours (like, who has time for that). I installed my first liquid cooler yesterday, it is amazing how low the temps get.

@jwaye89 9 ай бұрын

Banger of an install video fams. Keep up the hard work

@a_davis3305 6 ай бұрын

Great video! I was stuck on my installation and this video solved all my issues!!! Thank you!

@Aesth3tix 4 ай бұрын

Great video but what is the second outlet for on the pump head? The cable goes to the pump head and splits to sata and a couple others I can’t remember. Is it not needed?

@katecraven1604 3 ай бұрын

Iv got the same question and there’s no manual in the box

@MrBeeMeR320D 3 ай бұрын

looking into building a new gaming pc and this cooler looks amazing! Love the big square lcd on which you can project so many things. Never ever build a pc before, so video(s ike this one are a real blessing to me.

@entropicdoom8018 2 ай бұрын

What about the other cable that plugs into the side of the pump? You only plugged in the USB-C cable. There is another couple that plugs in right next to it and it has a SATA power cable. So are you sure the pump had power? The fans were plugged into the hub and the hub had SATA power. So that means the fabs had power but the pump did not. Is there anything I am missing?

@lilbrogamer12 Ай бұрын

Do I need the usb header to micro usb cable or can I skip that part I can’t find it I also have a pre installed hub

@1braincellwhm 3 ай бұрын

Great guide. Shows that lianlis "manual" is so inadequate that it's mind boggling.

@ForTheExperience 8 ай бұрын

What is the pass through cable for?

@IDontKnowYou1216 2 ай бұрын

They changed the AM5 mounting. It doesnt have that black plastic piece anymore. Just pins that connect to the block and ratchet it down.

@AytacYildirim 6 ай бұрын

This is best wiring video i ever seen for Galahad LCD. Quick question. Is cables enough for other reverse infinity fans ? I have 6 of them

@rodhester2166 9 ай бұрын

Great video.. You are the best at showing steps in the installation process. cheers ..

@GearSeekers 9 ай бұрын

Thank you!

@3Konaa Күн бұрын

There is an extra cable that can go into the pump, why is it not used?

@blizsgarage8487 6 ай бұрын

Did you get the controller with the Gala or with Fans? I didn't receive a controller with my Gala.

@MrGrim-oo5bq 9 ай бұрын

Very informative vid! I'm having a problem with the LCD panel screen not showing anything but the LL Logo. I have it hooked up right just like you and everyone has said to. Everything else in the app works fine, except the screen shot of the LCD block head picture in the app itself is blank in several places in the app that it shows up. None of the themes in the GA II LCD part of the app will work! I have the latest version (2.04) and the latest firmware 0.9. Any help would be appreciated, lot of $$$ for the main attraction not to work. Thanks! Ciao

@inteaussparks7511 8 ай бұрын

having the same problem. it just started two days ago but before that it was working fine

@michaelryder9199 8 ай бұрын

I am having the same issue. Likely buggy software.

@EAprima 8 ай бұрын

Uninstall absolutely EVERYTHING including the registry using Revo Uninstaller. When you have done that, go to Program Files and delete the Liam Li folder. When you've done that, reset your PC and load windows again. When windows is loaded, install the latest version of the L-Connect 3 software. The GA II LCD should work. If you still having problems, make sure your CPU actually see the LCD controller by going to Control panel / Adminstrative Tools / Computer Management / Device Manager / Universal Serial bus Devices. If you just have the AIO only, you should see two connections, "LianLi-GA_II_LCD_v0.1" and "LianLi-SL-infinity-v1.4". If you just see the infinity v1.4 only that means your USB connection is not properly fitted into your AIO head, meaning you need to open your PC and push the USB in there a little harder. If you see the LCD part and you are still facing problems, you need to contact Lian Li directly and the fastest way from my experience is via Reddit. Before going to contact them, go to EVENT VIEWER and check if any errors messages comes up under the Lian Li application for it would be a good idea to have that to hand. Just in case, if you are thinking of re-installing the firmware, do not do it until Lian Li recommends you to do so. I hope you get it solved.

@EAprima 8 ай бұрын

@@michaelryder9199 Uninstall absolutely EVERYTHING including the registry using Revo Uninstaller. When you have done that, go to Program Files and delete the Liam Li folder. When you've done that, reset your PC and load windows again. When windows is loaded, install the latest version of the L-Connect 3 software. The GA II LCD should work. If you still having problems, make sure your CPU actually see the LCD controller by going to Control panel / Adminstrative Tools / Computer Management / Device Manager / Universal Serial bus Devices. If you just have the AIO only, you should see two connections, "LianLi-GA_II_LCD_v0.1" and "LianLi-SL-infinity-v1.4". If you just see the infinity v1.4 only that means your USB connection is not properly fitted into your AIO head, meaning you need to open your PC and push the USB in there a little harder. If you see the LCD part and you are still facing problems, you need to contact Lian Li directly and the fastest way from my experience is via Reddit. Before going to contact them, go to EVENT VIEWER and check if any errors messages comes up under the Lian Li application for it would be a good idea to have that to hand. Just in case, if you are thinking of re-installing the firmware, do not do it until Lian Li recommends you to do so. I hope you get it solved. Yes, the software indeed has been very buggy, but I hope my last interactions with Lian Li has helped improved that as I have been talking to them when there was a whole host of problems. Oh yes, there are planning to release a new update to LConnect 3 soon. Their biggest issue is the software is still having issues with the aRGB of certain motherboards.

@spacecowboy306 Ай бұрын

Well I wish you would have told me that installing it in the position you have I would not be able to see the LCD lines on the left. So now I have to reinstall the LCD with the lines on the top and bottom.

@danijelb.3384 7 ай бұрын

How much better is the performance between the lcd version and the Trinity SF?

@titzmageex 19 күн бұрын

If I have multiple sets of fans going to the hub, I don't need to connect the Argb cable to the motherboard for every additionally set do it? Just pwm for all of the additional set, and then everything is controlled from the hub at that point? Thank ahead of time! Been watching your stuff for years.

@JeanClodVanShot 8 ай бұрын

Awesome tunes just as always Nick❤

@TheLite0003 Ай бұрын

Thank you for your work on this! I have the same Gallahad II and the same motherboard. I followed this guide to meticulously, however my system fan in bios all read zero. They all work, and show up in L-connect 3, but on the bios level, it doesn't appear that I can control them. Any ideas?

@tingting1985 9 ай бұрын

Thank you chef Nick! I am using Gigabyte Z790 AORUS ELITE AX. It seems like the pump 4-pin header is at the bottom of the MB... Will it be okay if I plug the pump top to CPU_OPT instead? Thanks!

@carlospacheco6225 17 күн бұрын

Hello could the rgbs of the fan itself be turned off the lights only but keep the line rgb on? 😊

@mirkodiciano4647 9 ай бұрын

great install video guys, that record function is super sick thanks chef nick

@Mae_DOOM Күн бұрын

I would like to know what happens if I do not use the USB connector on the controller? What would stop working? I understand that the 3-pin connector would control the RGB and the 4-pin connector would control the fan speed. What would stop working on the hub if I do not connect the USB?

@MrMikeHimself Күн бұрын

i have the same question bro

@marcinsmaga3441 9 ай бұрын

I've bought the 280 version of that cooler about a week ago. Unfortunately it seems like I got a faulty unit as the water pump is so loud above 2700 rpm that it is unacceptable. Sounds like a mini jet engine. Also there is a lot of issue with software. I use AL120 v2 fans for the rest of the system. First it would crash all the time. Then it would not recognize the device until recent update. Now every time I start the software it resets all the settings for the fans. Also when change the fans to spin up based on GPU temp it does not provide accurate temp of GPU. I use it with AMD 7600X in Lian Li O11 Air Mini and at full load it keeps the CPU temp at about 84 C. Rad is install in front of the case. Unfortunately there is not a lot of space behind As my GPU is about 320 mm long so that leaves about 0.5 cm space between.

@LIANLIHQ 9 ай бұрын

Sorry for causing any inconvenience and thank you to address the issue. we recognize the reset fan setting issue is a bug and we're working on this. We'll provide the latest version soon.

@PixelVogue 9 ай бұрын

I have the 240 at the back in my Mini, shame you can't fit a 280 in it. Not sure where to put it if I got a 280

@stuartk1ng 2 ай бұрын

Hey i have a question, if you use the sl 120 v2 fans on it instead of the infinity fans how do you wire it?

@dustind8149 2 ай бұрын

Did you find an answer? I'd assume you would only need the V2 controller then.

@scottcerato4473 Ай бұрын

One thing thats annouying with this unit and the tl lcd fans , is the CPU usuage when displaying sensor readings . I dont know why but usuage can range from 7% to 13% , which causes idle temps to rise from 36c to mid to high 40s for me . Also i have had random disconnects only with the Gallahad II and causes my game to crash and had to restart PC . Great products but issues with L-connect 3 .

@Jenkss 9 ай бұрын

Great video guys, best useful for those installing the specific AIO or others similar.

@milenkrumov6579 4 ай бұрын

My question is can I sync all my 7 fans ( UNI FAN SL-INF ) which are on one fence 3...second fence another 3 and standalone....They all have their own controller .....( Lian Li GALAHAD II LCD 360 ) has a completely different controller... I would be very grateful to learn how all this can be synchronized

@scienticus 2 ай бұрын

I like the infinity fans and also the display. BTW, its 8th Gen Asetec with a good cooling-performance ... perfect, but. does it have an negative effect, that the intel backplate is plastic and would you recommend better thermal paste for an Intel 14900KS?

@Kevvv.3is 9 ай бұрын

My biggest question that I can’t find the answer to. If I run a 9-10 lian li fans, can it all go to the aio controller or do I need to have a separate controller for the fans since the triple pack cable is different from the aio.

@MadDogGaming 8 ай бұрын

You can buy all the singes you need and daisy chain them to the AIO controller

@bozoqturkmni8137 7 ай бұрын

Hi Tobias, I've the same qu😅 What was your solution?

@Kevvv.3is 7 ай бұрын

@@bozoqturkmni8137 I bought 10 singles and return my triple pack fans. The 10 singles are separated into 4 single connections after daisy chaining them. Connected them to the AIO and worked perfectly. And in my case is only 1 single controller.

@jonathanrush1811 18 күн бұрын

what about the the plug thats right below the usb type c on the aio head ?

@joeschmoe5608 9 ай бұрын

That’s pretty dope, I have an all Lian-Li fan setup with the original Galahad and AL120 fans (10x) in my O11D-Evo. I will probably update to this new AiO and matching SL Infinity fans when I update my whole rig for 50 series (currently on 3090Ti and DDR4)

@dcook882 6 ай бұрын

Very informative. Looking forward to using this cooler

@fd-ho4py 3 ай бұрын

I wonder if I can use ga lcd with inf fan and my other tl fans in l3 connect software together

@congminh4250 2 ай бұрын

Do I need to plug the argb header of the hub tho argb header on mobo to control argb of these fans? I thought the mirco usb cable is enough for both pwm and argb control

@goobles64 12 күн бұрын

I dont have the mounting brackets in mine?

@ronswanson1410 9 ай бұрын

Does it matter the direction of the pump when mounting to mobo? So like both tubes coming out the right side, the top side, the bottom side , or the left side are all ok or like only a few orientations are ok? Ty for the video!

@im_keinyl Ай бұрын

Do you need to put all the wires in the aio or just the usb-c?

@mikelascelle2921 9 ай бұрын

Awesome vid. Quick question. I got the infinity version. I have the infinity fans in case already. They came with a different cable it plugs into the controller with one cable. The Galahad has a cable with a 2 plug into controller. Do u think I can put the 1 plug from the triple pack on the Galahad so I only have one controller instead a controller for Galahad and controller for fans

@idk_alex2283 9 ай бұрын

chef nick my glorious king thank you for the guide, I love you

@Voltomess Ай бұрын

There is no GA II l connect 3 for download anymore I don't see it.

@maydaygoingdown5602 9 ай бұрын

Looks great, how are the fans for noise? I need a really really quiet system. And if I purchased the case fans too how do they connect to be in sync?

@puddleduckist 2 ай бұрын

This really looks like a nice cooler!!! Thanks!!!

@Deletistjerk 9 ай бұрын

Definitely recommend nylon washers for installing radiator. Prevents radiator leakage from over tightening of screws causing damage.

@EdgeHanga60 4 ай бұрын

Where did he plug the other end of the usb port around the 9:25 mark

@brycem7580 9 ай бұрын

Listen mister Nick. I love your content and I love Lian Li products so this was always going to be a banger... but mate, you need to start using nail clippers if you're going to be a hand model hahah

@sumtincrazy1 9 ай бұрын

I wanted one of these until I found out there is a recall on them that is posted on the Lian Li website. I have the Galahad and it works great but the Galahad two lcd looks awesome!

@beedog743Gaming 4 ай бұрын

I don’t see the secondary download on the LianLi website, I’ve tried to follow their “firmware update guide” but it just says it’s the latest version and I don’t have any LCD tab on the software, can you possibly provide the download link?

@Zeryis 3 ай бұрын

Can you switch between the new and old power cables with these models? Everything works except my fans because I am using the wider other version than what was provided.

@TPA_JW 4 ай бұрын

Great video. I am stumped on something, maybe you can help. I have the GA LCD cooler AND a triple pack of 120mm infinity sl fans (which has its own controller). How can I connect both hubs up to the PC? Can each hub be connected to a usb port on the motherboard?

@Phalaxis83 9 ай бұрын

Banger install guide fams.

@notadeity 9 ай бұрын

The decent framerate of the display is a winner. Your friends could get up to all sorts of mischief with that screen record software if you left them alone with your pc for 5 minutes though.

@sshd0w Ай бұрын

Didn’t know it had reinstalled thermal paste! Would it be bad if I added a little more on it ?

@GearSeekers Ай бұрын

You don't need to add more

@matthewolvera4892 5 ай бұрын

Why is your rpm for the AIO fans showing 0 rpm (located on the left side above the pump rpm). Mine is doing that too now. Could you please explain? Is it because of the pass through cables?

@Let_The_World_Burn 4 ай бұрын

at @7:16 you say that cable is optional but not why you would or wouldn't use it ? Also, what is the other port on the side of the LCD screen beside the type c used for? Thank you

@salovoley 4 ай бұрын

on my aorus x670e master board i only have a cpu opt and a cpu fan and a sys_fan8_pump on the top of my board where should i plug the pump cable greetings friend and what speed of pump and fans did you use and what firmware do you have and how did you update it to make it right.

@patrickschannel7541 5 ай бұрын

I bought the same aio but my question is I know it has pre apply themo paste but do you still have to put more thermo paste on the cpu just in case it’s not enough ?

@iTzTheSnipezZ 7 ай бұрын

Nice Guide! But i have a problem and i cant figure it out. If i record my screen and press import... the video is gone. Same thing with mp4 uploads.

@schinnabua 6 ай бұрын

You missed one connection on the pump with 2 connectors?? Did you just leave it unplugged?

@cemsengul16 7 ай бұрын

is it true that Lconnect 3 doesn't have coolant temperature as a sensor? I worry that the fans will ramp up and down pointlessly if they are following CPU package temps. I am returning a new icue link h150i elite because it has a Coolit pump that has to stay at high rpm. I am thinking of buying this Lian Li AIO instead because of the 8th gen Asetek pump.

@ghosteso6797 5 ай бұрын

Just found the channel and I love it! A little question for my upcoming build, I’ll be running an additional 4x uni inf 120 fans and 2x 140 of the same. Do I need to download both versions of the software or can I do everything from the one version? Thanks!

@steve_frampton 7 ай бұрын

I am about to put this exact AIO in this case so would like to know if you can plug the front 160mm fans into the controller or should I either leave them plugged into the included hub or just plug them directly into the motherboard?

@wordup7668 3 ай бұрын

My AIO is only a month old and the screen freezes all the time and it will be stuck on the logo and there is nothing I can do to fix it with out fully shut down not restarting

@MxJavice 9 ай бұрын

I had really bad luck with this Aio it seems. Bought one, leaking in the box. Got a quick RMA with the company I bought from and they replaced with a fresh one, still unopened with all wrapping on packaging etc, second one also leaking... Replaced that one decided I didn't trust it after 2 leaking units in a row and replaced it with a different brand cooler.

@SAMMY123458185 6 ай бұрын

i am new to building pcs can anyone tell me what the optional wire is for its at 8:35 ,thanks

@user-ps8wd4wb6i 9 ай бұрын

Hi, new pc builder here. Can I also connect the 3 daisy chained fans to the controller? Thank you so much.

@user-ps8wd4wb6i 9 ай бұрын

Hi, new builder here. Want to ask if I can also put 3 chained infinity fans onto this controller?

@mrnugget613 7 ай бұрын

Also wanting to know this. Have bought a 3 pack ontop of this pump. but cant get them to go

@MrScelerisque 7 ай бұрын

The thing is a friend of mine is making a build and just kinda finished it, his pc works. But the fans on his AIO cooling are not working, does anyone know what might be a common issue here bcs all the cables are corretly installed

@andrewsimpson7332 7 ай бұрын

My MOBO has both a CPU_FAN1 and PUMP_FAN1. Which one should I use for PWM connector? Thanks!

@DougRousso 7 ай бұрын

stumbled across this guide, thank you for putting this together. I don't understand why the fan config on this AIO is set to exhaust the case air out the top. I would think, and I tend to configure, CPU AIO cooling to pull outside fresh cool air in through the radiator and not push hot case air through a hot radiator. Would love to hear your perspective on it. I would have flipped those fans over frankly. Curious to hear your thoughts, and others that follow you.

@GearSeekers 7 ай бұрын

Exhausting air out the top is the optimal setup because the front for you case should be set to intake.

@trevorgoforth1946 5 ай бұрын

Yeah went to install my Galahad this evening and the box fires up and displays everything as it should. But I had a problem with the fans not coming on or getting any kind of RGB lightning... I'm wondering if I just got a faulty unit 😩 I looked up so many wiring guides and it appears to be hooked up as it should be. Im just not getting anything going on with the fans or lighting 🫤

@niksalakic5406 3 ай бұрын

This or asus ryujin III 360?

@user-ps8wd4wb6i 9 ай бұрын

Hi, new pc builder here. Can I also connect the 3 daisy chained fans to the controller? Thank you so much. 🎉

@RathalosEmperor 6 ай бұрын

So how does does this work if I already have 2 x3 fans packs of the infi fans and reverse blade fans?

@studior3dd 9 ай бұрын

Is the pre paste good enough. I seen people get rid of it ! Ans apply their own?

@gamerationx4393 3 ай бұрын

This water cooling has the lcd on the fans aswell? Or a need to get then apart

@astroeclipse5392 5 ай бұрын

You didn't go into explanation for the other plug in on the pump head.

@utkanmahanoglu 7 ай бұрын

Can i use the pwm functions through motherboard and the argb with Asus aura sync or have i to install l-connect?

@igamewhensheletsme3851 6 ай бұрын

Why is the pwm and rgb pass through cable optional? What is that anyways?

@s.harshit91 9 ай бұрын

Can you please compare the colling performance with galahad 2 performance. I am not sure why they are released home grown pump in ga2 and asetek in lcd version within 2-3 months. My ga2 performance stopped working withinn a month making me wonder if lian li pumps are not that reliable and thats why they shifted to asetek.

@troycasinillo448 9 ай бұрын

thanks for the tutorial installation

@ch20054 6 ай бұрын

I have a question: (bad english sorry) If I already have sl-inf fan and L-connect3 controller, should i need duo controller for both fans and bump? RSVP

@vaggelismanousakis6147 7 ай бұрын

Diffrence between this and lian li galahad ii lcd SL-INF ?

@FantasticHD7 7 ай бұрын

If I buy the regular Galahad 2 lcd (non inf fans) can I just swap them out with 3 inf fans?

@danijelb.3384 7 ай бұрын

Of course

@That_Dude88 9 ай бұрын

Badass Mounting set up..

@levanimaduro1190 3 ай бұрын

I’ve recently installed it in my pc everything is working except the lcd screen it’s just black and the pump runs at full rpm I’ve tried the firmware update that lian li has on their website but it still isnt working and it also disconnects at random moments making the usb sound i’ve plugged in everything and made sure its all the way in like they said on their website but its still not working properly, the problem is mainly the lcd screen. Do you have any solutions for me ?

@GearSeekers 3 ай бұрын

Unplug from the USB header on your motherboard and replug while the system is running. Also make sure all the cables are plugged in properly. The USB cable to the pump top needs to be plugged in quite firmly from memory. Double check :)

@Voltomess Ай бұрын

did you fixed it?