For more information please visit 3M Marine @ 3mmarine.com/
Пікірлер: 44
@joeschool47245 жыл бұрын
I hate mixing, testing and cleaning up. If I have a small job, I order the gel coat spray cans from dolphinite. They'll mix custom orders from a paint chip or swatch. I heard they had some problems in the past, but my experience was recent, and no problems for me.
@timothy7901105 жыл бұрын
Sooo, is this made by 3M perhaps? Im not sure, dont think they mentioned it enough times. Can we have a 3M count?
@Loompius2 жыл бұрын
I love 3m but wowwwww. Pump the brakes Bois.
@THOMASTHESAILOR6 жыл бұрын
I'm ready, all I need now, is a Boat..
@automan1223 Жыл бұрын
other gel coat guns use a 4 to 6 mm spray nozzle. The HGP gun says comes with 1.8 & 2.0. Does the pressure on the pot lower the size of the orifice required ? Does is have a better atomization pattern than other dump guns ?
@49dodgeguy6 жыл бұрын
And use your 3M work cart ,,,,,
@bakervinci163 Жыл бұрын
You did not use a hardner ?
@freddynews64784 жыл бұрын
Harbor freights $15.00 spray gun works just as well, but soon they will probably be know longer available, if you catch my drift. Made in America
@demolisionmanjimenezbaez7319 Жыл бұрын
Is possible to put gelcoat in a surface epoxy
@anapaolalozanocantillo43623 жыл бұрын
Que referencia es esa pistola,cuánto cuesta,es urgente gracias
@bolialvarezoliva66765 жыл бұрын
El gelcoat es puro o lo ligastes con acetona?
@punziracing2 жыл бұрын
what psi are you spraying the gel coat?
@sergiorobertodalhavalhefil55196 жыл бұрын
Can anybody tell me what is the name of the cart where he unroll the paper to isolate the painting area ? Where can i find it to buy or do by myself ?
@stuartkent3836 жыл бұрын
www.starchem.co.uk/products/masking.htm Ive used this one: www.todayshomeowner.com/video/combination-painters-tape-and-masking-film-dispenser/ Its ok, but has a slight head ache factor.
@mlinecomposites13 жыл бұрын
Can anybody tell me if they’ve ever sprayed gel coat, if so is it normal for it to orange peel? Is it just because the nature of gel coat to get that way or I’m not adjusting the spray gun well? I have a Fuji HVLP T75g & 3M PPS. This gel coat I sprayed is really thin, not like typical thick gel coat, sold by Lilly Ram
@bomberman6593 жыл бұрын
How many coats are you putting on? Normally 3rd coat is when orange peeling effect occurs but you will probably need at least 3 coats anyway depending on the projects you’re working on. Hope this helps
@hullhealersboatworksrestor43772 жыл бұрын
Yes it will peel. If it’s not orange peeling your doing it wrong. If you use Duratech High Gloss Additive to thin the gelcoat you will find you get little to no peel. Although, it’s quite expensive! NEVER EVER EVER use Acetone to thin, or styrene or MEK (not MEKP, that’s hardener). Only use patch aids like duratech, fast patch any spectrum or polynt patch booster. Good luck!
@1975Per3 жыл бұрын
Why remove the filter?
@hullhealersboatworksrestor43772 жыл бұрын
Gelcoat is to thick so it will become a blockage.
@Antjan467 жыл бұрын
How much hardener is to be used?
@AntonioHernandez-bv4wn7 жыл бұрын
Antjan46 what you use to reducer gelcoat?
@hullhealersboatworksrestor43772 жыл бұрын
2% by volume is recommended. But you can catalyze from 1-4% depending on temperature and color of gelcoat. Darker color’s require up to 4% MEKP.
@thamesranger89908 жыл бұрын
how many time does he say 3M................................
@HeiDrug7 жыл бұрын
many :)
@colefloyd1967 жыл бұрын
thames Ranger it's by 3m
@ubbeus6 жыл бұрын
I counted thirteen.
@robbysteele6 жыл бұрын
no idea. i stopped at 1:25
@janbertram1007 жыл бұрын
can Gel Coat be used on pontoon boat's wooded deck?
@deltabravo57193 жыл бұрын
yes, likely will unbond itself over time... likely will crack from the flexing... but certainly it can be used on wood.
@thameswater25617 жыл бұрын
experts by the score.
@stuartkent3836 жыл бұрын
G100-6 seems more versatile with less disposable components
@elmeradams87813 жыл бұрын
The disposable parts are the genius of the system. Once you're done throw it away saves time, headache, and every time you use it, it works like brand new (because it is new).
@reefslayer21Ай бұрын
Try spraying a dump gun vertical
@walkertongdee7 жыл бұрын
g100 dump gun better system
@sunilkumararickattu18455 жыл бұрын
How gelcoat thin?
@TN-kd8ju4 жыл бұрын
Yes
@TN-kd8ju4 жыл бұрын
Yes
@Pendragon5017 жыл бұрын
This is a completely mislabeled video.
@walkertongdee6 жыл бұрын
That plastic gun is a joke
@elmeradams87813 жыл бұрын
It's kick butt, I have the normal accu spray. Such a time saver, and sprays primer like a champ.
@pierre-yvesasensio99056 жыл бұрын
tous du plastique , encore un pot de yaourt avec une date de péremption , grrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr