Gel Printing, layers using paint, ink, stencils, stamps and handmade foam stamps
Рет қаралды 99,467
5 жыл бұрынThis is a technique that requires patience. Watch how NOT having the patience messes up 'what would have been' a beautiful print. Tried to reproduce it. Got some nice prints but could not duplicate that first one! This technique could produce some gorgeous prints!!!
********************************************************************
******************PRODUCTS USED ***********************
5X5 Gelli Arts Printing Plate www.gelliarts.com/collections...
8X10 Printing Plate www.gelliarts.com/collections...
Gelli Arts Paints www.gelliarts.com/collections...
Brayer www.gelliarts.com/collections...
Baren www.currys.com/catalogpc.htm?...
Golden Paints
Turquoise (Phthalo) www.currys.com/product.htm?Pr...
Quinacridone Nickel Azo Gold www.currys.com/product.htm?Pr...
Liquitex Basics Paint
Yellow Oxide www.currys.com/product.htm?Pr...
Unbleached Titanium www.currys.com/product.htm?Pr...
Cadmium Yellow Medium Hue www.currys.com/product.htm?Pr...
Quinacridone Magenta www.currys.com/product.htm?Pr...
Medium Magenta www.currys.com/product.htm?Pr...
Bright Aqua Green www.currys.com/product.htm?Pr...
Joggles Texture Plate Dash Dot www.joggles.com/rubber-stamps...
Art by Marlene Stamp www.joggles.com/rubber-stamps...
Ranger Archival Ink Pad
Jet Black www.simonsaysstamp.com/produc...
Leaf Green www.simonsaysstamp.com/produc...
Cobalt www.simonsaysstamp.com/produc...
Carabelle Stuidio
Scribbled Lead & Textured Circles by Birgit Koopsen www.joggles.com/rubber-stamps...
Texture in my Journal by Zorrotte www.joggles.com/rubber-stamps...
Non Tisse Printing Texture Plate www.simonsaysstamp.com/produc...
@ruthiemiller9959 5 жыл бұрын
I think the reason that the details you applied with the posca pen did not come out was because they were buried under all the first layer you put down. What you put down first come out on top. What you put on last come out on the bottom....I learned that the hard way myself. Love your videos....you are so creative!
@DeniseLush 5 жыл бұрын
I can't believe I didn't think of that!!! Thanks so much!!! and thank you for the compliment. I appreciate it.
@KiwiJane1 4 жыл бұрын
Exactly right!! What you put down first, is what you see at the forefront of your print. The reason some things show through on some prints, is because of gaps and transparent layers (Golden paints are amazing for this process). This is also why the reveal is so fun for me...you just never know how it’s going to turn out and sometimes it’s even better than I’d hoped. Worst case scenario, I can print over what I don’t love.
@fatoomgierdien2181 3 жыл бұрын
Fantastic tip. Thank. You
@RamoArt 5 жыл бұрын
Always remember that you're working from front to back, so if one layer is opaque, the next one won't show through. I actually really love that the first print didn't fully transfer. It looks like a peeled wallpaper. Absolutely beautiful.
@DeniseLush 5 жыл бұрын
Yes I keep forgetting that! Who knows! Maybe that is WHY I love the print so much! Because it's imperfect! Thanks so much!
@Abbie7301 5 жыл бұрын
Your voice over was great, you have a very soothing voice. These prints are beautiful. Very inspirational tutorial.
@DeniseLush 5 жыл бұрын
oh thank you. So sweet.
@susananncherrysetter3902 5 жыл бұрын
I'm right in the middle of cleaning a 450sq.ft apt, (retirement community ) for "inspection" on Monday...I'm 74, artist, love gelli plates, SO what do I do? I stream your fabulous video doing wonderful different things with a gelli plate, just for background sound........(I have stacks of art supplies, etc all over every surface, table, couch etc.....to "downsize" and neat-en up the place) ......And now I'm trying to figure out how to clear off table to do some gelli printing.....and downsizing just flew out the window. It did....I watched it waving bye bye. I need all my stuff, in fact I may need More Stuff. Who says you can't teach an old dog new tricks? Thank You for Sharing, lovely prints!
@DeniseLush 5 жыл бұрын
OMG! I love this. You made me chuckle and you made my day. I have another video I will be posting this weekend. Hopefully it will spark some more ideas for you! Please keep commenting on my videos. I love what you had to say. It made me so happy. I hope you pass inspection on Monday! Good luck! Now get playing!!!
@susanmcfie9261 3 жыл бұрын
I’m downsizing and moving and staying sane by watching art videos. Only problem is as you say....I keep finding reasons to keep stuff. And I’m tempted to unpack some of my art materials
@Hollywoodhat 4 жыл бұрын
Two things... I really appreciate when you show ' mistakes' and are frank about what you don't like about a product. The second is that your honosty when you are disappointed in a result. You are so gifted that it gives me hope when I see your
@Hollywoodhat 4 жыл бұрын
Lost this and must continue... Love your homemade stamps too. They are ' primitive', natural, organic and not mass produced. You are the real deal.
@DeniseLush 4 жыл бұрын
oh thank you so much. Sometimes people see it as being negative but if you don't like it you don't like it right? lol
@DeniseLush 4 жыл бұрын
Oh thank you. You are so sweet.
@natalierice6528 5 жыл бұрын
I love your use of layering. Thank you for the inspiration.
@DeniseLush 4 жыл бұрын
Thanks so much!
@LynnLBE 5 жыл бұрын
Gosh these were really unusual & BEAUTIFUL‼️. Love the color combinations.
@DeniseLush 5 жыл бұрын
thank you! Glad you like it!
@christinebell8980 5 жыл бұрын
Loved the brayer picking. Great prints, even the fails were great.
@DeniseLush 5 жыл бұрын
thanks!
@beanbeanster7219 5 жыл бұрын
I love your prints and your knowledge is priceless. Thanks so much for sharing with us! 🙂🙏💎
@DeniseLush 5 жыл бұрын
awww thank you so much.
@DSmith-pc9jn 2 жыл бұрын
Wonderful work. Gave me lots of ideas. Can't wait to try them.
@DeniseLush 2 жыл бұрын
Awesome! Thank you!
@Cyrilmc222004 3 жыл бұрын
Thank you so much Denise, I really really love ❤️ all those gorgeous and stunning prints, even the one that went wrong, still has virtues and is stunning too. Please stay safe and well too xxx Mags
@DeniseLush 3 жыл бұрын
Thanks Mags. I still like it too!
@deenaotway7717 5 жыл бұрын
Love watching you gelli print, Im not that adventurous with my gelli plate really should just go for it, thank you for sharing
@DeniseLush 5 жыл бұрын
Yes you should! Use inexpensive paper so you don't feel like you're 'wasting' paper if you like. And don't forget that sometimes when you pull a print you may not like it as a whole but if you cut it into pieces, you may LOVE it! Thanks so much for watching.
@BohemianCrafting 5 жыл бұрын
I love that first gelli print more.It looks so vintage,unique. Great sharing.
@DeniseLush 5 жыл бұрын
thank you. I love it too.
@dianadevlin3717 5 жыл бұрын
You are so easy to listen to, thanks for the ideas!
@DeniseLush 5 жыл бұрын
awwww thank you. That means a lot cause I was so nervous to do a voice over.
@melissabomgren4816 3 жыл бұрын
Enjoy your video I’m just beginning so I really appreciate you sharing your experience I want to use my gelli prints for card making and the first two pulls you did I know you were disappointed but I was like those are awesome!!!! Again thank you for sharing
@DeniseLush 3 жыл бұрын
Thanks so much. I'm glad the videos help!
@fatoomgierdien2181 3 жыл бұрын
I love your creativity and tips. Thank you.
@DeniseLush 3 жыл бұрын
Glad you like them!
@susanmcfie9261 3 жыл бұрын
Lovely peaceful and satisfying printmaking. Very interesting that you take us through your process of trial and error. I loved the first print too and felt you could continue to work into it. Great stuff thank you
@DeniseLush 3 жыл бұрын
thank you!
@joycegandy7305 5 жыл бұрын
I just found your channel and like the Gelli plate designs you did!! Thank you:-)
@DeniseLush 5 жыл бұрын
Thanks so much!
@Ermwhatthesigma55 5 жыл бұрын
I really like the way the first 2 prints turned out!
@DeniseLush 5 жыл бұрын
thank you! me too!
@renig5059 5 жыл бұрын
Enjoyed watching you.... your first print came out as one of those archeological finds... very 🆒...👍🏻👩🏻🎨
@DeniseLush 5 жыл бұрын
lol thanks so much!!!
@bunnysantamaria1808 Жыл бұрын
Really enjoyed this. Sometimes things work and sometimes they don't.
@DeniseLush Жыл бұрын
yes, so true.
@debbiesjournals4550 5 жыл бұрын
Loved watching you do these prints. I usually only do 1 layer but this looks like fun! Hope you were able to catch me up with a use for your partial print. Maybe a tag for a gift or ATC cards? Thanks for the tutorial and the voiceover was great!
@DeniseLush 5 жыл бұрын
thanks so much. I have not used my partial print yet. It has to be something special because I love it so much. I have a tendency to make a lot of prints and not do anything with them! Not all. I just have so much fun gelli printing that I just play without a purpose. Thanks so much for watching! You must give multiply layers a try!!! It will be fun.
@christineboone2850 4 жыл бұрын
Love that final print!!
@DeniseLush 4 жыл бұрын
Thank you!!!
@Marilynlovesebiking 4 жыл бұрын
Hi, Denise. Brand new subbie here. It is 2020 and last night was the time change, so to watch this video when it was the time change last year, made me chuckle. Thanks for your lovely video. You have a very pleasant voice to listen to. Love all your prints. Yeah, I am going to have lots of mini journals. I may mat a couple of mine for wall art. We will see.
@DeniseLush 4 жыл бұрын
lol That's funny! Enjoy your play time and all your prints! lol Thanks so much.
@shannonburns2289 10 ай бұрын
LOVED THIS video. So many great ideas, I will have to watch it several times!. I appreciate your commentary, as it helps to know what didn't work, as well a what did. I feel like we are the same colour wave length too.
@DeniseLush 10 ай бұрын
Glad it was helpful! Oh that's fun when you find someone who likes using the same colours as well!!!
@TheQueenBee47 5 жыл бұрын
I really enjoyed your video. Especially that you showed how something did not come out as you wanted/planned. It is disappointing (such a beauty) but not the end of the world, as you may learn something from each pull of the paper. I have just purchased a Gel plate and yours is one of my favorite videos so far. Thank you
@DeniseLush 5 жыл бұрын
Thank you so very much! You are going to have so much fun Gel Printing!!! I have actually grown to love my print that didn't turn out. But yes, it was still disappoiting. But I got over it. lol
@dianejarvis270 5 жыл бұрын
Can't understand why you were so disappointed with the first and second pulls. They look to me just like the partial remains of a medieval wall painting. Loved them. Thanks for sharing; have subscribed.
@DeniseLush 5 жыл бұрын
Thank you so much. I was really disappointed at first. Cause it would have been a super awesome print. But I have grown to love it just as it is.
@susanmcfie9261 3 жыл бұрын
I thought so too
@KarenElaine 5 жыл бұрын
Thank you for taking us through the process and I have learned so, so much! Looking forward to trying this technique! This is the first I've seen of your videos and I'm subscribing to see more. Great demo! :-)
@DeniseLush 5 жыл бұрын
oh thank you so very much! I love it when people get excited and learn from what I post! That makes me so very happy. And thanks so much for subscribing. I look forward to reading more of your comments!!
@anknaparkin7510 5 жыл бұрын
Pretty amazing and love all your handmade stamps, they are gorgeous and inspiring. First class act👌😀♥️👏👏👏
@DeniseLush 5 жыл бұрын
Thank you so very much! I'm glad you enjoyed it!
@G1Becky 4 жыл бұрын
This was fascinating to watch! I’ve not done any geli printing but am very interested in how it is done! Love your voice over - so soothing!
@DeniseLush 4 жыл бұрын
THank you so much. Gel printing is fun and addictive! You've been warned if you decide to give it a try.
@suzieq23ify 5 жыл бұрын
I have so much fun watching you gelli, but I would have more fun If I was doing it myself!!LOL Great video and thanks for some great ideas.
@DeniseLush 5 жыл бұрын
lmao thanks so much! At least you're still having fun!
@artrinsicvaluesoflizhuey8493 4 жыл бұрын
KZfaq found you for me and I am so glad! Your technique is new to me and I'm always looking for fresh ways to use what I have. Putting all the layers on the plate before pulling is different. I've seen many videos where they pull a print, do a new gelli color combo/texture, pull that on to the same paper, and repeat several times to get the layered look. I'll give your method a try. Thanks for sharing.
@DeniseLush 4 жыл бұрын
well thank you! I'm glad you found me too! I have more gel printing videos so please check them out. Hopefully you'll get some more ideas. Here's the playlist: kzfaq.info/sun/PLDg0Un7_fPcxiidfM3SYPEKzcgsGrpnK_
@lyndajoyce6243 4 жыл бұрын
You are so fun to watch! So creative!!
@DeniseLush 4 жыл бұрын
Oh yay! Thank you! That makes me happy to hear that!
@lyndajoyce6243 4 жыл бұрын
@@DeniseLush I really love watching you! Changed my pic!
@jeanieferretti4203 4 ай бұрын
Thank you for sharing your gelli plate pulling ❤
@DeniseLush 4 ай бұрын
you're welcome!
@tracyverberkmoes4818 2 жыл бұрын
I love pulling the paint off like that too!! I feel ya!
@DeniseLush 2 жыл бұрын
yes. Thanks!
@KiwiJane1 4 жыл бұрын
I need to get my hands on some of those foam stamps!
@DeniseLush 4 жыл бұрын
They can be quite fun. I tend to forget to use them. oops
@patmiller2604 5 жыл бұрын
Love your prints....quit pretty🤗
@DeniseLush 5 жыл бұрын
thank you so much!
@margittatschiersch120 5 жыл бұрын
This Technic is wonderful 💖🙏
@DeniseLush 5 жыл бұрын
thank you!!!
@techne9 4 жыл бұрын
My big Gelli dried out so much nothing would lift. A coating of mineral oil cleaned it and, left overnight (then baby-wiped), restored the surface. I love this video!!
@DeniseLush 4 жыл бұрын
Sally Adler that’s awesome! Glad it worked out for you. Thank you!
@heksedansd.2919 5 жыл бұрын
Such nice colors and very nice prints! !- and the peeling in the beginning was good to the soul😊
@DeniseLush 5 жыл бұрын
lol thank you. My last video has peeling as well! lol Just in case you need more therapy.
@heksedansd.2919 5 жыл бұрын
@@DeniseLush THAT kind of terapi I allways need😊
@greensleek 4 жыл бұрын
I like your damaged transfers. They are cool! So abstract! I hate to say it but they are my favorite.
@DeniseLush 4 жыл бұрын
lol it's okay. you can say it! Thank you
@carolynshanks2612 3 жыл бұрын
I am a genuine newbie. I am watching as many videos as I can before starting. This one of yours makes me realize that I will make mistakes, yet the first piece you made WAS gorgeous. Keep it for a collage, small pieces. It is amazing. I love your combination of images. Also, I will not use a tool to dry the paints.
@DeniseLush 3 жыл бұрын
Yes, Not all prints are going to be something you like. There's quite often a lot of 'yucks' in the play session. Have fun when you start playing!
@artdance0 4 жыл бұрын
Excellent ideas.
@DeniseLush 4 жыл бұрын
Thank you
@theartycraftytart7759 4 жыл бұрын
I love the grumpiness of the first two prints! ❤️❤️❤️
@DeniseLush 4 жыл бұрын
lmao thank you
@theartycraftytart7759 4 жыл бұрын
😂 that’s autocorrect for you! Bless it! 😜
@DeniseLush 4 жыл бұрын
@@theartycraftytart7759 made me laugh!
@theartycraftytart7759 4 жыл бұрын
Oh I see! I hope it was good funny, that’s how it was intended!
@DeniseLush 4 жыл бұрын
@@theartycraftytart7759 Yes it was!
@pauladyer9845 3 ай бұрын
I like how you use different things..thanks
@DeniseLush 3 ай бұрын
Thanks! It's fun trying different items to see what print you'll get.
@Nevertoosweet2eat 4 жыл бұрын
(At 0.45) I get the same satisfaction when I can pull the cloths drier lint off the filter in one full piece. Just found your channel, so I’m looking forward to watching more of your videos. Thank you!
@DeniseLush 4 жыл бұрын
oh you made me laugh! lol Thank you so much. I hope you enjoy my videos.
@soorashreesadekar4567 2 жыл бұрын
Lol. That was a funny analogy. But yes. I got the same satisfaction
@MyArtyHeart 5 жыл бұрын
Ooh ooh I'm excited to watch this! 😂 As I'm writing this, I wonder why don't I wait to the end to say this, but I'm not waiting lol! Wanted to tell you I'm excited! Weird, I know!
@DeniseLush 5 жыл бұрын
I'm guilty of doing that also. lol Too funny!
@jneigler 5 жыл бұрын
Never will I use a heat tool on the Gelli Plate. Thanks for sharing.
@DeniseLush 5 жыл бұрын
I'm assuming that's why it didn't work.
@pearlann5995 5 жыл бұрын
Beautiful prints ❤️ watching you work. My first time on you channel ❤️🎨
@DeniseLush 5 жыл бұрын
Well WELCOME! Thanks so much for dropping by!I hope you become a regular!
@Cyrilmc222004 5 жыл бұрын
Denise those prints are so awesome and stunning I really love 💕 them. And the paint you pulled off the brayer was so awesome too, you could use it in Collage or something similar. xxx Mags
@DeniseLush 5 жыл бұрын
I did keep the paint I peeled off the brayer! LOL So who knows! thanks
@sugarcoated101 5 жыл бұрын
Lovely, fun and Inspirational.....Thanks for sharing and I subscribed.....
@DeniseLush 5 жыл бұрын
Thank you so very much!!!
@juliebergacker5680 4 жыл бұрын
Awesome,just awesome😁👍👏
@DeniseLush 4 жыл бұрын
Thank you!
@janice2992 Жыл бұрын
Good prints both very nice 💖👍
@DeniseLush Жыл бұрын
Thanks so much 😊
@AzaleaLuna 4 жыл бұрын
I actually really love the grungy affect you got from the first and second prints.
@DeniseLush 4 жыл бұрын
Thanks I really do as well. But I was really disappointed I didn't get the full print.
@retrobree7989 2 жыл бұрын
Great video, I love the colors you use! I’ve been making some multi layer prints too, and I found that if there were lots of layers I really had to let the final layer dry (after rubbing on the paper), and if it was left for about 10 minutes the final layer would be bonded and cured, and the whole thing would pull up nicely 🥳🥳Great channel, I just subscribed!
@DeniseLush 2 жыл бұрын
Awesome! Thank you!
@ordinaryradiance 5 жыл бұрын
What a pleasure to watch your technique to create your page(s), I learned two important things - let each layer dry and cover it all with a white layer in order to pull-up everything underneath. Brilliant. And I love the second ghost print. Thank you for all the links you provide. It would be super if we could see it in real-time not sped up, that’s the beauty of being able to watch an artist work. Now I’m subscribed.
@DeniseLush 5 жыл бұрын
well first of all, thank you so much. Second, I am so glad you learned something from my video! That's awesome. Third, oh my goodness....if I did this real time, it would be a LOOOOOONG video. Is it just so you know how much time has passed between the layers? Or you just like to watch it real time? Also, thank you for subscribing!!!
@mutti20101 4 жыл бұрын
Paula Devi if you click on the 3 dots on the top right of the video then select playback speed. You can select a slower speed to play it slower. Turn your volume off cos her speaking will sound real bad slowed down. Remember to change the speed setting the same way back to “normal “ & turn your volume back up when finished 😉
@DeniseLush 4 жыл бұрын
@@mutti20101 thank you Lynda for providing that info for her. I thought I had, but I am not seeing my full response. Sorry about that Paula.
@cathyevans2755 Жыл бұрын
Thank you!
@margaretpinsent6388 11 ай бұрын
I love your work, and ive subscribed now. Gelli printing is so tantalising! I have liads that didnt work. I love your use of colour. To help dry in between layers, I use one of those hand-held fans to cool your face on a hot summer's day. It works well, cuts down the waiting time. I've heard heat can dry your plate, so maybes that's what you're finding with yours. I love your foamies/handmade masks etc 👏
@margaretpinsent6388 11 ай бұрын
Oh shoot, you did this years ago! 🤦
@DeniseLush 11 ай бұрын
Thanks for subscribing! I'm glad you're enjoying the videos!
@belbe417 3 жыл бұрын
I know this is old but I love how the first one turned out. It would look ace as artist trading cards
@DeniseLush 3 жыл бұрын
Thank you!!!
@kathyseek6087 5 жыл бұрын
Really enjoyed your video!. It is so jam packed with helpful demos. You make me feel better because I have had the paper stick onto the plate stubbornly as happened to you. I had blamed it on the number of layers, maybe types of paints, or thickness in that area or the thickness of the last coating. But I see from yours that these don't seem to be the cause. You also mentioned a plate getting dry. I have addressed that problem by taking a small amount of mineral oil (from the drugstore) and rubbing it into a clean plate. ( I don't leave thick layers of paint on my gelli plates so I don't think that's the cause ). I wipe off the oil well with a non-lint paper towel like Brawny and then pack it away with its plastic cover and into the clam shell. I also have discovered that it is a big mistake to put the plate onto paper for a base, or to store the plate ...this pulls some of that sliminess out of the plate which isn't good. Hope this helps one of your viewers. I look forward to more from you as I LOVE your video approach and your style. Thanks so much!
@DeniseLush 5 жыл бұрын
I wonder if the the paper gets left on too long and that's why it sticks!?!? Who knows. Yes I have had some people suggest mineral oil. I am going to have to myself some! I've also been told baby oil.I don't leave lots of paint on my plates anymore. But that one that is dry, I had. And I do not store it on paper, just the plastic sheets that came with it and in its original packaging. So all that I am doing right! Lol Thank you so much for your comment and compliments! Means so much to me!
@dianadevlin3717 5 жыл бұрын
Love the brayer cleaning segment lol
@DeniseLush 5 жыл бұрын
it is satisfying isn't it!!!! lol
@babesmixedmedia 5 жыл бұрын
Fun session. I don't think the yellow circles in your flowers showed up because they would have been on the bottom layer below the blue when you did your final print. All these prints turned out beautifully. Even the ones off that little five-by-five plate.
@DeniseLush 5 жыл бұрын
Yes, another person pointed that out too. So clever. I didn't even think of that! lol Thanks so much!!!
@sonileesmith2256 5 жыл бұрын
Agree...what is last is on the bottom...
@bridgethaig8923 5 жыл бұрын
@@DeniseLush maybe next time wipe away the paint and then add the yellow, I watched the beginning of you video 4 time watching you peel the old paint off your brayer.
@DeniseLush 5 жыл бұрын
@@bridgethaig8923 LMAO! I think my brayer is ready for another peel, but I'm waiting to do it on video for everybody! Lol How weird is that? lol
@getova1 4 жыл бұрын
Soni lee Smith if you add some acrylic retarder it may help and give some working time. I don’t use a heat gun or hairdryer as I want more time before the acrylic paint dries and the paper sticks to the plate.
@birgitblume4980 3 жыл бұрын
Thanks for sharing also what did not turn out as you wanted it -it's beautiful though!
@DeniseLush 3 жыл бұрын
Thank you! 😊
@Engelhafen 3 жыл бұрын
Yiu are very gifted with this medium
@DeniseLush 3 жыл бұрын
Thanks so much
@enamary1 5 жыл бұрын
Hi Denise, I love watching your videos! Thank you. The first print - the bits of which that did turn out were totally gorgeous!! And I'm thinking that the yellow Posca paint didn't show up because when you pulled the print, the yellow marks ended up being under the stamped layer of opaque blue paint - it's a reverse stack of paint. Aah, and now I've read the comments below and see that Ruthie Miller said the same thing... but I'll send this anyway. Also, the Tim Holtz stamp set is Bitty Grunge. Extra thanks for your lovely work. Keep it coming!
@DeniseLush 5 жыл бұрын
Thanks so much!!! I'm glad you enjoy my videos. Yes everybody seemed to clue in to the whole layering process and why it wasn't showing up. Everybody but me that is! LOL! OOOH And thank you for naming that stamp set, I will have to write it on the plastic right now so I know for next time! Thanks again!
@babsa3421 5 жыл бұрын
Thank you for reminding us to play!
@DeniseLush 5 жыл бұрын
anytime!
@travellife08 2 жыл бұрын
I've noticed a couple of people using a solid clear acrylic sheet, around 1/8" thick and slightly larger than the dimensions of the gel plate, placed underneath their gel plate. The gel plate is centered on top of the acrylic sheet and when they want to view their layering they can easily pick up the gel plate and look at it through the back which will end up being the front of your print. It really helps visualize the layering, I plan to do this myself.
@DeniseLush 2 жыл бұрын
I have one of those now!!!!
@travellife08 2 жыл бұрын
@@DeniseLush I realized after I posted that comment the video is 3 years old. Did you have some cut or did you buy some pre-manufactured ones?
@DeniseLush 2 жыл бұрын
@@travellife08 Joggles sells them! They're great to have. Especially when you want to use your smaller gel plates kinda like a stamp!
@diannadiatz1140 5 жыл бұрын
Dear Denise, I LOVE the abstract "accidents" that you pulled -- just as they are! They are wonderful examples of the art work doing what "it" really wants to do! You may want to do a series of happy accidents on the gelli plate! Best wishes, Dianna
@DeniseLush 5 жыл бұрын
Thank you so much. I love your comment. I need to think more like that "the art work doing what IT really wants to do!" Thank you.
@diannadiatz1140 5 жыл бұрын
@@DeniseLush Dear Denise, Art stuff is alive with its own energy. Let your right brain loose! Color copy the prints that you love to collage! Remember those fashions from several years ago where designers broke up designs? That's what I'm reminded of. Your prints reminded me of paint cracking and peeling. Real distressed looks! lol Remember, don't take yourself too seriously! There are no failures or mistakes, just unexpected outcomes! Have a great weekend! Dianna
@DeniseLush 5 жыл бұрын
@@diannadiatz1140 thanks so much. I tend to forget to make copes of my work.
@suebishop6071 5 жыл бұрын
New to this I've just got a gelli plate TY x
@DeniseLush 5 жыл бұрын
oooh you're going to have fun!!!!
@KiwiJane1 5 жыл бұрын
I have tried a similar technique and I used acrylic paint extender to help pull the paint from the gelli and had pretty good success with it. Maybe try adding it at different stages of layering....I just experiment until I find what works and what doesn't. :-)
@DeniseLush 5 жыл бұрын
I was able to pull prints after. Just not that first pull. Wasn't meant to be I guess. but it does look wonderful as is. Thanks
@fionasmom6254 4 жыл бұрын
I loved the peeling of the brayer.
@DeniseLush 4 жыл бұрын
lol It's very satisfying! lol
@fionasmom6254 2 жыл бұрын
@@DeniseLush I've spent a solid hour peeling little tiny pieces off my brayer before, so yes, watching that was very satisfying.
@DeniseLush 2 жыл бұрын
@@fionasmom6254 😅
@RockyRoadCreationsbyDiana 5 жыл бұрын
Love peeling paint. It really is satisfying. :) Diana
@DeniseLush 5 жыл бұрын
lol It really is!!!
@juliao1255 4 жыл бұрын
I love this video - found it helpful and inspiring. Too bad I am so behind the curve here since this was made more than a year ago. I am so disappointed the stamp by marlene is no longer available cuz I love that one! Will be watching for it to show up for sale used...
@DeniseLush 4 жыл бұрын
Thank you. You're never too late to watch a youtube video. Gel printing is still quite popular. Oh, that's too bad about the stamp. It's a great one. I'm sure you'll come across another one that's somewhat similar. Or maybe a combo of two stamps that can achieve the same look. You check Amazon for a used one?
@sherylchristensen7410 5 жыл бұрын
It's cool, though. It didn't come out the way you wanted, but it reminds me of an old wall that had a mural on it and some of the mural came off. I love it.
@DeniseLush 5 жыл бұрын
oooooh Thanks for making it sound so cool! lol
@rachelangelaart 5 жыл бұрын
Hi Denise, you know I just love gel printing and it’s so satisfying watching you, love your hand made stamps! Oh yes and totally get the peeling off layers on your brayer lol. If you are finding your plate is a bit dry (and I know you don’t like cleaning you plates 😱lol) but do give it a good clean and then rub baby oil into your plate, leave it a while, rinse it under the tap and leave to dry naturally, this should bring the condition back! Hope that helps! 💖
@DeniseLush 5 жыл бұрын
Thanks Rachel. So what should i give it a good cleaning with? Soap and water? Baby wipe?
@rachelangelaart 5 жыл бұрын
Hi Denise, yes a baby wipe or water and artist soap, just to get the excess off. Then the baby oil will get the rest off as you massage it in. Let it sit for a while and rinse again. Leave to dry. Hope this helps
@DeniseLush 5 жыл бұрын
@@rachelangelaart thanks. I still haven't tried it yet! lol
@katframe 5 жыл бұрын
Would you consider making a video of how you make your home made foam stamps. I really love them.
@DeniseLush 5 жыл бұрын
Yes I will. I have had this request from another person as well. Just trying to think of some ideas for some stamps I would like to make and I will get to it!
@kelleyfreeman401 5 жыл бұрын
I absolutely loved watching you pick that acrylic off your brayer! I don't think mine has a thick enough layer to do that, but I'm gonna be watching to see if I can when it does get thick enough, lol. I think I have the same little scripty stamp that you don't know where it came from. Is the writing in French or something? If it is, it is one of those small Prima texture stamps. Loved this video and I hate it that you didn't get that first pull! The pieces were gorgeous. Sorry for the long comment, but I would like to request that you make a video on making your own foam stamps if possible. I am interested in making my own but I don't really know where to start. Thanks for sharing!
@DeniseLush 5 жыл бұрын
lol thanks. It is so satisfying lol I'm actually able to do it fairly often. With that particular brayer anyway. I think the writing is french. It's definitely not english. Thanks. Never apologize for a long comment. I don't mind at all. I have another video where I do make some foam stamps, but its by die cutting foam. I could do another video for you. I'll try and think of some designs I would like to do. Thanks for the video idea! Keep em coming! and thanks so much for watching!
@diannadiatz1140 5 жыл бұрын
Dear Kelley, There are lots of wonderful ways to make handmade stamps. Type that phrase on KZfaq, and check out Pinterest. You don't need fancy equipment or supplies. Have fun experimenting!! Best wishes, Dianna
@kelleyfreeman401 5 жыл бұрын
@@diannadiatz1140 Thanks for the suggestion, I appreciate your help!
@cheryl7476 5 жыл бұрын
You tossed those great acrylic skins! Was fun watching you pull them off. Another fun and interesting video. I sighed when the print didn’t turn out all the way. What a lovely piece, nevertheless. Lots of pieces to use. Cool stamp by Marlene, Denise.
@DeniseLush 5 жыл бұрын
oh Gosh no! I did not toss those acrylic skins! I haven't used them for anything yet but I have them! Yes, I love that stamp by Marlene. I have to stop myself from using it on everything.
@cheryl7476 5 жыл бұрын
Oh wonderful to hear, you kept those pretty skins. Getting a sense of your style and creativity, I was surprised, when I thought I saw you toss them, thinking that you would keep them.They are going to be lovely on a project, which I hope you share with us. So tickled to have found you, Denise. From the two videos I have watched, I like you style and process. I look forward to getting to know you to some degree, though listening to you and by enjoying being in your art space as you play. BTW, I enjoy your voiceovers. 💐
@cheryl7476 5 жыл бұрын
One more thing, I would be using that stamp on nearly everything too, if it were in my stash. It is very cool. Use it lots!
@DeniseLush 5 жыл бұрын
@@cheryl7476 Who knows how long it will be before I actually use them though! lol I'm so happy you found my channel as well! Thanks so much!!
@alrenefischer4481 4 жыл бұрын
Thank you
@DeniseLush 4 жыл бұрын
You're welcome
@MyArtyHeart 5 жыл бұрын
I loved your prints. Too bad about the first one, but my goodness they are all so pretty!
@DeniseLush 5 жыл бұрын
thanks. I know, that first one broke my heart.
@shashiprasad4446 2 жыл бұрын
Lovely😍😍😍
@DeniseLush 2 жыл бұрын
thank you
@berlykim37 5 жыл бұрын
Great video. Tfs
@DeniseLush 5 жыл бұрын
thanks so much!
@lisascott5997 4 жыл бұрын
Hi I am new to gel prints I loved watching all the beautiful colors in your handmade stamps and textures and I have a question the white paint that you put on to lift the print is that some thing that you have to do to get the print right or just your preference?
@DeniseLush 4 жыл бұрын
Thank you Lisa, I'm not sure exactly what you're asking. So let me know if I got this wrong. You can choose any color to lift the print. It depends what you want. But in order to pull the print you need a final full layer. Hope that answers your question.
@veronicastewart1112 11 ай бұрын
Those dried paint strips can be collaged back onto art. They lend amazing texture.
@DeniseLush 11 ай бұрын
yes totally agree
@kerryloper6142 2 жыл бұрын
Ok I think what you think is a fail is beautiful. You can put picture in the blank spaces. Fall is what I’m thinking with the colors. I love it.
@DeniseLush 2 жыл бұрын
Thank you so much!
@KarenPetitt 5 жыл бұрын
Your video is fabulous and as a newbie to Gelli thank you for sharing what not to do lol! Have you tried Ranger's Gel Plate Conditioner on your other Gelli plate? It might help x
@DeniseLush 5 жыл бұрын
thank you!I figure it helps other to see where I go wrong. lol No, I have not tried Ranger's Gel Plate Conditioner. So far baby oil has worked for me.
@SuzieMilkowich 5 жыл бұрын
Very Cool, Thank you. I am just learning.
@DeniseLush 5 жыл бұрын
That's awesome. Just play, experiment and have fun!
@SuzieMilkowich 5 жыл бұрын
I am just learning to lighten up and let go when it comes to art. I was art repressed most of my life except for Pysanky. This is very therapeutic for me, had lots of trauma as a kid. Gonna play now for sure. Thanks again. I love your video. I will watch more soon.
@DeniseLush 5 жыл бұрын
@@SuzieMilkowich yes, art can be great therapy. Enjoy.
@nokiot9 2 жыл бұрын
And holy moly! You can let the paint dry on your plate?! I’ve been working so fast trying to get it done before it dries because whenever it does my prints come up really faded- you just gotta put an active layer on the back at the end 🤯
@DeniseLush 2 жыл бұрын
Yes you can! woo hoo!
@Ms7art 5 жыл бұрын
Dear Denise, great video, thnx. I love the Prints the way they came out. If you put down the dots first, then the flowers and last the Background everything will show up (it's called reverse glass painting" technique). What has to be in the foreground (details) must be painted first, when you use opaque paints. Dryibg the layers is important too, i use a Hairdryer, works perfekt. English is not my native language, sorry, hope you understand my description :)... much love.,
@DeniseLush 5 жыл бұрын
Thank you Yes I understand what you are saying. It was figured out MUCH later. lol Something I had actually known but completely slipped my mind when I was doing this print! LOL Thanks so much
@lourdesmurielrios5856 3 жыл бұрын
Hi! Fantastic video and beautiful print! Could you give us a link where to get that beautiful rubber stamp (not the handmade ones obviously) and also where to get that item you use for fixing your paper to the gelli plate, pls? (The speed hall one?). Thanks!
@DeniseLush 3 жыл бұрын
everything is linked below the video
@jade0626 5 жыл бұрын
Denise, this was awesome. Sorry you lost that gorgeous print. The others were quite pretty too. I think that stamp with the writing is Finnabair (Prima) called Read to Me. The Tim one is called Bitty Grunge. I have both also. Hope this helps. 🤗
@DeniseLush 5 жыл бұрын
Thank you Judy. Yes someone else said they believed that little one was Prima as well but I am not sure if they told me a name. I wrote the name of the Tim stamp on its backing so I will now know! thanks again!
@annekedev8811 5 жыл бұрын
Beautiful I love it all, the stamps from Marlene are from Studiolight and those stamps have numbers no name's :-) Your stamp is no 12
@DeniseLush 5 жыл бұрын
Yes that's the only thing I found too STAMPBM12 Thanks
@brianacpratt 5 жыл бұрын
First time viewer, not yet tried gelli printing. I'm really enjoying your style! I wonder if you couldn't affix small prints or pieces thereof to tiles for decorative use or sealed as coasters. I know coasters are everywhere but they are so useful! Or decorative boxes in wood or chipboard? I feel your pain on the lost print too 💛. TFS!
@DeniseLush 5 жыл бұрын
Hi there! welcome! So you mean print directly on a tile/coaster Or attach the paper print onto a coaster. You can gelli print on different surfaces. It would be more the medium that you would have to make sure was suitable. But I think paint on tile would work if sealed properly! Nice idea!!! thanks so much for watching!
@pennycandyys 2 жыл бұрын
I really enjoyed your voice over, as someone else commented. And that’s a big deal because I just realized that there are other artists who I enjoy watching them work, but their voices 😳😳 I also liked watching you work, and using your stamps-makes me want to try making my own stamps, as well. Anyone: I want to try Gelli printing myself, but I have not yet started buying supplies. Can or does anyone recommend certain paints? Or should I just buy whatever, as long as it’s acrylic?
@DeniseLush 2 жыл бұрын
Oh thank you! That's a nice compliment. As for the gel printing question. You don't need special paints. If you already own some, try using those first. I mostly use Liquitex Basics or Golden Fluid.
@pennycandyys 2 жыл бұрын
Ok, thank you!
@Kat-fq9de 4 жыл бұрын
Thank you for this inspiring video! May I ask what size brayer you use/ recommend? Many thanks :-)
@DeniseLush 4 жыл бұрын
I use a 3"
@paulinelarson465 5 жыл бұрын
That first print would have been better done directly onto the paper. The difference in dryness of the layers messed up the mechanics of printing. The layering covered up details you wanted on top because it works like flipping a pancake. Next to griddle becomes top.
@DeniseLush 5 жыл бұрын
It's doable, just reverse the layers!
@kimclark9276 5 жыл бұрын
Fantastic you inspire me! I have just had a go but my first pull just pulled off the light coat of paint? What did I do wrong? My 2nd pull was ok but not all came off, do I need different paints? I am just using regular acrylics? I bought a golden gel medium to try and make them not dry as fast but if I'm right this is not what you want? Sorry for all the questions Denise! :) thanks.
@DeniseLush 5 жыл бұрын
It can all be so finicky, its really hard to say what the problem is. That final layer has to be thin. It should completely cover the plate, but you should be able to see the previous layers underneath. And then put that paper down right away and rub. Sometimes you may have to rub a little harder. Chances are if you only pulled that top layer of paint, its because you used to much paint. You want all those before layers to be dry. Hope this helps!
@laurakate1992 5 жыл бұрын
Denise Lush thanks I’ll try again I think it was too thick 🙄
@OfficialHeatherWilkerson 4 жыл бұрын
Great video! Subscribed 🙂
@DeniseLush 4 жыл бұрын
Thanks so much!
@Zoomfreaky 5 жыл бұрын
So sad your first print didn't work out. Maybe next time, just put on the paper, and let the paint dry while the paper is on. I usually let it dry over night...so patience is a bit of a thing...:) I use this method to clean my plate. Works well for me. Maybe also for you? Thanks for a lot of inspiration for Gelliprinting. Fun to watch! Haha...ok, I spoke out of turn. Is that even a English sentence? Second print went great. Anyway. Loved your video. Want to start making my own stamps again...:) You have a very nice voice. Great to listen to.
@DeniseLush 5 жыл бұрын
patience???? ugh....lol Yes that is an English sentence.lol Thumbs up! lol Thank you so much for your compliments and your advice!!! I think I will need a second gel plate if I am to let one sit overnight. lol
@isaacdogkeith9230 4 жыл бұрын
Just curious- why don't you use a (clean) brayer on the back of the final paper pull? Does it tear the paper? I'm new. Love your video!!
@DeniseLush 4 жыл бұрын
Thank you No reason. I just feel I can apply more pressure and the barren feels better in my hand. You could use a brayer if you prefer.
BalcevMMA_BOXING
Рет қаралды 8 МЛН
Subodh Sarkar
Рет қаралды 31 МЛН
VovaLika Family
Рет қаралды 6 МЛН