Generator Engine Rebuild - 10HP Briggs and Stratton

Рет қаралды 205,539

3 жыл бұрын

This engine I pulled off a Briggs and Stratton Storm Reponder generator. It had run out of oil and the connecting rod seized and broke. Will try and rebuild the engine.
This engine came from the this generator: • Blown Generator Engine...
Part 1: This video
Part 2: • Storm Responder Genera...
Part 3: • Generator Engine Rebui...
Part 4: • Will It Make Power Aga...
Blown Up Engine Model# 21T212-0116-G1 Code: 110106YD
Connecting Rod# 694691
Piston# 793318
I use Harbor Freight Super Heavy Duty Degreaser in my ultrasonic cleaner www.harborfreight.com/1-gallo...
Visit My Amazon Store:
www.amazon.com/shop/jamescondon
If you want to donate to the channel, you can use the KZfaq "Super Thanks" feature or via PayPal: www.paypal.com/paypalme/james...
#GeneratorRepair #SmallEngineRepair #SmallEngine #DIY #Fixed #Troubleshooting #HowTo

Пікірлер: 586

@Al-Fiallos 3 жыл бұрын

Well worth watching. I learned two tricks, the acid to remove the aluminum, and how to use a rope with the sand paper.

@richardphelan8414 3 жыл бұрын

Why not just lap the valves while your there ?

@sccarguy8242 3 жыл бұрын

Great video, but am I the only one stunned by the price of a piston and rod for that thing !?!?!?

@MitchEllis-dn9lf

That rollock nylon bristle brush is the cats meow for cleaning aluminum mating gasket surfaces.

@giggiddy 3 жыл бұрын

In my world, this is the perfect video of this kind. It is long; detailed; unusual issues are addressed; suspense; surprises; requires unique approaches to disassembly/assembly, etc. Your controlled demeanor and no frills process makes this one of the best channels out there. Thank you for doing these for us. I recognize how much time is involved in producing one of these quality videos.

@shinhostergroup 3 жыл бұрын

Since you had this engine torn down that far, I would have lapped the valves.

@oghenefegorikolo8684 28 күн бұрын

Thanks James. I've learnt a lot about gasoline engine repair and rebuild. God bless you.

@fightdhr8866 7 сағат бұрын

Fixn to start a 17.5 broke rod..Ran up on you ..Thanks for the video...Alot work..

@seth3209 Жыл бұрын

Why didn’t you do n show the valve removed being lapped & the other?

@briancarter8092

Thank you for saving me the time and hassle of pulling the flywheel off of mine. I guess these modern magnetos don't use points and condenser, at least not under the flywheel.

@blakefindlay1870 Жыл бұрын

I'm honestly blown away at how well that crank journal turned out! Truly incredible to be able to save that

@daboomer2277

You're the best mechanic out there for small engines

@brianryder5886 3 жыл бұрын

Hey great video, I am a merchant Marine Chief engineer for the past 25 years working onboard ships, I just wanted to point out something I learned from an old-timer regarding torque, the reading can be off as much as 25 pound feet when stacking hands on tool the higher up on tool the higher the reading not sure if that is true on small torque settings, I bought 3 10000exl for $150.00 all run 1 had blown head gasket, blowing oil out front seal, replaced seal head gaskets lapped valves reassembled now I am getting 140psi each cylinder plan to test later today. Just wanted to say thank great video series slot of help

@General-Eclectic 3 жыл бұрын

Never saw that rope & sandpaper trick before! Awesome! Can't wait to try it myself.

@kiiiisu 3 жыл бұрын

woah my mind was blown that sanding with rope is some 200iq stuff right there, good video cheers

@volvogt21 3 жыл бұрын

Thanks James. I learn so much from these. I appreciate all the work you put into making the process of diagnosis and repair so easy to follow.

@tinkmarshino 3 жыл бұрын

Not bad.. I used to rebuild old lawnmower engines as a kid of 12 -14.. (that was back in the 60's) the compression I always strived for was 105.. But I would hone and cross hatch my cylinders lap my valves, everything was mic'ed and in proper tolerances.. other wise my dad would make me do it again.. I got to do my first car engine at 16.. and to my surprise it actually ran and lasted for many many years until I sold the car... I am to old and broken these days (I did my last car restoration 2 years ago a 62 t-bird) So now I just watch others do it.. thanks for the memories brother I appreciate it.. I also wish you luck with your you tube channel... Carry on!

@AbdulSamad-mo5xs 3 жыл бұрын

You are an excellent tutor, I watch your channel more often and learning a lot.

@wildefox1478 3 жыл бұрын

Nice work, I'm glad that engine was able to be saved, now it has a fresh rebuild and should provide many hours of service on that generator if taken care of and not run low on oil again.