Generic Apple Charger Cord Replacement

No video

Generic Apple Charger Cord Replacement

Рет қаралды 57,720

Күн бұрын

The cord I installed→ amzn.to/2dZZK1L
My Multimeter http→ //amzn.to/2eeqY3P
So with this project, you need to ask yourself, is it worth spending $6 on a cord when I can just get a new generic charger for about $15? For most of you, the answer is likely no. But just in case you do, here is the video for you. I hope you find it helpful.
SUBSCRIBE→ www.youtube.co...
•••••••••••••••••••••••••••••••••••
The camera I use: amzn.to/2ec3wTx
My backup camera: amzn.to/2edXF1e
Super handy tripod: amzn.to/2dfVRTq
Wireless Mic I sometimes use: amzn.to/2dAgquC
•••••••••••••••••••••••••••••••••••
Business Inquiries: please email me from the About page:
/ adamdiy
Disclaimer:
This video is only for entertainment purposes. Any injury, damage, or loss that may result from improper use of tools, equipment, or from the information in this video is the sole responsibility of the viewer and is to be used at the discretion of the end user/viewer and not AdamDIY and or Adam Hill. If you are uncertain about any step of the process, or feel unsure about your skill level, seek a more authoritative source.

Пікірлер: 31

@jedwards975 Жыл бұрын

Great simple video helped with all the details. Did it myself and it worked! Thanks!!

@cousinit9718 6 жыл бұрын

Wow man thank you this is really helpful I looked at a new charger price and it's 79.00!

@phototristan 8 жыл бұрын

Interestingly these are known to start working again if you heat them up a bit such as sitting on the the brick or using a hair dryer. It only works for that one time though it does work, I've tried it.

@varunphull1164 Жыл бұрын

The video is fantastic and the explanation is excellent. Could you please share a new link to purchase the cable as the previous one appears to be broken? I would greatly appreciate any assistance you can provide.

@gamerpinguin007 4 жыл бұрын

my magsafe 2 cable had that issue , I ask to service for it and they said we dont repair it you can get new one (90$). I repaired it with your way in 10$. Thanks sir.

@xrayneoo 6 жыл бұрын

Great video do you ever check for the correct voltage and amps?

@jimsutton2398 Жыл бұрын

Just finished the swap out. Plugged it in and attached to MacBookPro. The light on the end lit-up green but flashes -- it flashes briefly at 2-sec interval. The Charge lightning bolt on the screen goes on and off in time with the green light as it goes on and off. Thoughts?

6 жыл бұрын

Thank you! the pilers method to open worked great for me!

@rajbn1 3 жыл бұрын

Love your DIY table

@manmeetdce 8 жыл бұрын

Apple had a class action lawsuit against them for these chargers. Probably in 2006; if I remember correctly. They still haven't fixed the problem looks like.

@AdamDIY 8 жыл бұрын

Interesting.

@valeriaadelardi1862 2 жыл бұрын

Great job! Short and clear.... Thanks for sharing.

@maini51 2 жыл бұрын

Thanks

@leahide 4 жыл бұрын

someone have idea ? is possible adapter a cable magsafe 1 on power source magsafe 2?

@DerekHundik 6 жыл бұрын

did you let the adapter discharge before put your fingers there...

@1997LT1Camaro 7 жыл бұрын

So I bought a replacement cable on amazon. I took the old cable off that still worked, but had some breaks in the insulation. Once I wired up the new cable and it would not charge the laptop. I wound up reconnecting the old one and it worked again. I even tried reversing the polarity of the wires in case they messed up at the factory in china with no luck. Its the right replacement cable, as the magnetic plug matches up, just cant figure it out. Maybe I should do a continuity test on the cable? I am just not sure what each of the terminals represent on the plug of the laptop end.

@TarcisioCGoes 6 жыл бұрын

Could be a faulty new cable. The pinout diagram is here: pinoutguide.com/Power/magsafe_power_pinout.shtml

@brad8929 6 жыл бұрын

Can you splice the wires and tie/tape them together instead? I know it’s kind of ghetto but I don’t have a solder tool as I don’t do much work on electronics.thanks for the help

@diegudr 4 жыл бұрын

Yes you can. Just cut the existing wires as close to the cable connector as possible. Then you will have enough to work with to splice them. For a few dollars you can buy some heat shrink for the wires when you splice then together. That is a lot better than tape. When you put the brick back together it will be such that there is no tension on the connections you made so the wires will have zero chance of coming apart.

@falc0n2222 Жыл бұрын

Won't make a good permanent connection and you'll just end up buying a new one the next week prob

@monkeyshoulder198 6 жыл бұрын

White cable is a positive? Black - negative?

@armandocepeda7763 4 жыл бұрын

The link is no longer available.

@helderfolige9289 Жыл бұрын

Like it. Thanks

@armandocepeda7763 4 жыл бұрын

Good video. Thanks.

@gillsmith6230 3 жыл бұрын

The link to the cord purchase on Amazon is dead. Probably due to the chinabug.

@tahat1569 5 жыл бұрын

Thanks a lot

@Shohel165 7 жыл бұрын

Thanks!

@dnltsrgr 7 жыл бұрын

Is there anyway to do this without the solder?

@henrybarnett 6 жыл бұрын

@Lightning2011 4 жыл бұрын

Im pretty sure that if you get the black and white cable and splice them then get the new replacement cable and twist the wires it should work since power is still going through them