Thank you for sharing! I searched everywhere trying to get my remote to work and finally came across your video. In less than 2 minutes I now have a functioning remote. I’m very grateful

Bought two of these for my Overhead Doors; Model: Python 2 to replace the original openers. I followed the instructions and had it programmed within a few minutes. This video really helped! So far I love these...and a great price as well. I will say, these are much smaller than you would think. Very good purchase and I would recommend to anyone with the same door as I have. Through Overhead Door, the original replacement was $49.00 each. I replaced both of my remotes and the total came to approximately $31.50 (which included shipping). They also showed up via USPS within two days from when I received the email confirming the shipment! This was two business days sooner than I expected. I highly recommend!

I could not, for the life of me, figure out why my Genie garage door opener wasn't programming - I had no idea the red/green light mattered. Thanks for sharing this valuable information!!!

My husband and I are out here on a frigid Chicago winter's day programming ours. Glad we came across your video!! Thanks!!

Thanks for showing how to set the remote to the older systems. Helped me a lot!

Thanks for this very helpful video! I bought a remote at home depot and there were no instructions. After watching your video I had it working in 10 minutes!

Thank you for the easy step by step instructions It worked like a charm.

excellent, have old opener and remote and newer remote that came with the house. so after a few years the newer remote stopped working, changed battery and nothing. followed these instruction and working fine. outstanding info, thank you!!!!

Thank you for your video! After many frustrating attempts to key up a new remote, your valuable tip on changing it to a series one, finally made our opener work! Very Grateful!

100% agree with the positive comments below. I followed the instruction that came with the unit - no workie. I followed the instruction that came with the remote - no workie. I followed instruction from another KZfaq instructional video - no workie. I followed these instructions - workie! Also, some comments on this video state they are having poor range with this remote. I walked a house and a half away and it was still working. Thank you GateHouse Guys!

Very easy to follow. Doesn't take long for me to program. I'm a girl and I'm able to make this work by follow these easy instruction then everyone can. Thank you so much.

Thanks for the video. I didn't realize the remote has to be reprogrammed after replacing the battery.

Instructions the size of a Thanksgiving plater and still don't help as much as your clip. You turned frustration to success! Thank you!!

Best video out for this product! Thank you!

HEY GATEHOUSESUPPLIES,,,,THANKS FOR THIS INFO, I JUST BOUGHT THIS CONTROL FOR MY GEANIE PRO SCREW DRIVE MOTOR AND DIDN'T HAVE THE INSTRUCTIONS ON HOW TO PROGRAM THE MOTOR, SO THIS VIDEO DEFINITELY ENABLED ME TO PROGRAM IT AND NOW IT WORKS LIKE A CHARM!

Thanks for the video. Made programming my remote fast and easy

Thank you so much for this!! Life saver! 😁😃

Thanks. My key stopped working and because of your video I was able to get it reprogrammed.

Thank you, you made my day much easier...

thanks for the info, really grateful for the help!

Worked like a charm, great video

Worked like a charm, thanks!

Thanks, had it working in a matter of minutes.

Thank you. The video was very helpful.

Omg it worked!! Thanks :D

Thank you so much very helpful

thanks. my mom is going to be so happy i set it up for her

Thank you! Great Instructions!

this video was very helpful

Thank you for sharing. This made my non-working remote work.

No problem, very easy to understand. Thanks

Thank you. You are the best.

thank you! sweet & easy workssss!!!!!!!!!!!!!!

You Rock! Thank you!

You sir are a savior! Had a remote that was working then one day it just quit. Went through your programming and back in business! Thank you!!!

Good stuff! My new remote worked on the previous model.

Thank you Gatehouse but I too am having a hard time programming a new remote and some old remotes. Someone else installed, previous owners, believe it's the older model so I think I need to clear the learn button as you say BUT will that erase the remotes that do work and our side door pin panel? I'm just wondering how big a job in getting into!

Thank you so much..! It works..

Thank you helps a lot! 😁

This video was very informative and helpful to me. I even took the time to give a review 😂

i know this is OLD and all but thank you for your video

Thank you so much help me so much.

Thanks body it works thank you for the video it helped me out

I accidentally programmed my button 1 to both my doors, is there a way to factory reset the remote as to program it again? Totally want to reset to factory default…

Awsome, helped a lot.

Thank you so much!!

Thank God it works

geeeze louise thanks man... im sweating my balls here figuring out how to set this remote... u guys below me are right genie needs to rewrite their instruction manuals....

Thanks man!!!!

Thanks so much!

Thanks, that was just what I needed to know I wondered why the led's were different colors. Now why is this not in the instructions ????

I have a question. I have an old model gene intellicode and when I tried to re-program the light keeps blinking and do not take the programing

What if you have two of these? We can't figure out how to get both programmed. Do one and it works. Do the other and it works but the first stops. Please help

Thanks! :)

THANK YOU!!!!!!!

Hi Tyler, What does it have 9 or 12 code switches?

This ia what im looking for for how many years

I follow the steps and the garage door only goes up a few inches....any imput? The opener is a H6000A Genie Intellicode.

What if your garage door doesn't have a reset or learn button on it? I've looked everywhere and there isn't one.

Awesome TY!

Thank you!

Thank u so much

does a genie remote work on a liftmaster??

can it learn or copy codes from other remotes like my gate entry key fob remote to community living area?

Following the directions that came with the unit was a fail, watching this video made setting it up a breeze therefore. . . Victory!

Thank you:-)

Thanks!

how do i no what remote i need for my genie pro screw drive i no its called a master something

I’m trying to program this remote for a non genie opener. How can I do that?

Thank you

Hi how to go back to green after red ? Thanks

Could the genie remote works with a liftmater garage door

hi got a genie model # G5500 we just moved in this place and we got only one remote. i bought GENIE opener and for some odd reason it dont work did i buy the wrong one?

Can't get two remotes programmed for the same garage door. Changed one to series 1, then programmed it. Worked fine. Did the same for the second remote. Worked fine. Went back to first remote. Didn't work. Re-programmed it. Worked fine. Went to second remote. Didn't work.

Will this remote work for Genie 1/2 HP Screw Drive?

Genie G3T Remote Control

Can you add a lift master gate opener to the genie remote ?

I have the G1T-BX (one button remote), how do I increase the range on this remote? I literarily have to stand right up to the garage door to operate it. The range is pathetic. I'm curious if the G3T-BX has the same issues.

I have a model gcg350 , I lost the original remote and ive tried a few new ones. Currently I'm trying this one and it acts like it is connected only the door doesn't open/close when I push button the buttons. I've both red and green. The receiver flashes but nothing happens! Please help! Thank you!

Will this remote work with a Stanley D2001 opener?

Your system might be full, try to erase all codes by holding down the learn button for 10 seconds. Then repeat programming steps, make sure to only press and release not hold down when programming remotes.

I hold mine for 10 secs then red led turns on but once I let go and push it 3 times it just green unlike in your video it’s red.

a little confusing but i got it thanks

Do you know how to program it with a lift master?

What if my garage door opener doesn't have a button to push?

I have a a Genie Model G3T, my battery went out so i replaced it and now i can not get it to work on my garage door. I am looking on the back of my remote but i am not seeing any other model numbers. I have FCC ID: B8Q-315390T and IC: 2133A-315390T .

will it work on a genie pro screw drive

Yes if the unit was made after 1997.

T-T Mine is being a butt..it wont work. Lol the written directions were crazy as well. I'll get it eventually....

It works! IT WORKS! TYTYTYTYTYTYTYTYTYTYTY

will this work with a genie cryptar 2? The Gatehouse

Can it learning code from another remote ?

Does this work with DIP code?

They are the same.

Why do I have to reprogram my remote all the time? It's a pain. I have to crawl through my garage window to get into the garage and reprogram it like every other week.

Sounds like Ben Stein

Blabber for 2 minutes to show 10 seconds of programming... which doesn't work if your model doesn't have a "learn code" button.

Thanks so much!