Tutorial: Adding new remotes to your garage door opener

Рет қаралды 337,512

Күн бұрын

Look on the back of your garage door opener (flip down the light shade) and you will see a square button on the back.
Purple (like mine, really faded color): amzn.to/378jGZe
Green: amzn.to/31KvHTC
Red: amzn.to/2Svy9Jb
Orange or Red: amzn.to/3bsF4Mf
Yellow: amzn.to/2H5FFFk
Music by BenSound.com
Get some free Amazon trials!
30 days free Amazon Music: amzn.to/2ttPLwn
6 months free Amazon Prime for Students: amzn.to/2S1p8ZP
30 days free Amazon Family Prime: amzn.to/36LNgE8
Free trial + $5.99/mo Prime (EBT Card holders): amzn.to/2Pu8qAO
30 days free Prime Video + Prime Shipping: amzn.to/2S2CjcU

Пікірлер: 174

@tellthetruthna8523 3 жыл бұрын

Before YT I would have had to call someone to replace my garage door openers. Amazing how much I have learned to do myself thanks to helpful vids like this. Thank you!

@smokysmoky8467 11 ай бұрын

FIRSTLY AND MAINLY THXS TO OUR GOD ❤❤❤❤❤💯💯💯🙏🙏🙏🙏MY FAMILY AND ME WE KNOW THAT 💯💯💯❤️❤️🙏🙏🙏

@leilahankinson4498 4 жыл бұрын

Thanks for discussing the difference between already having a remote programmed and adding an additional remote without wiping the connection with the original remotes

@GarageMaxedOut 4 жыл бұрын

Glad it was helpful!

@Canoecamper Жыл бұрын

Perfect information! Glad I saw your video and followed your simple advice to add a third remote unit rather than reprogramming both my existing remotes and keypad. A five-minute job the way you taught this. Thank you immensely!

@GarageMaxedOut 9 ай бұрын

You are welcome!

@jamesplymire5342 2 жыл бұрын

Thanks, very fast and simple programming. Only 2 buttons!

@miketaouil5715 2 жыл бұрын

the best video to explain how to program second garage remote control thanks a lot for this video

@monicapeterson104 2 жыл бұрын

I needed this video. Thank you!

@brendafinchum748 2 жыл бұрын

Thank you!!! We have two remotes and all the other videos don’t clarify how to program an additional one!!!

@FammOverEverything 8 ай бұрын

Thanks pal! Just got a spare garage remote to keep for myself 😁

@melissaharpham407 10 ай бұрын

THANK YOU!! I spent an hour following the instructions from Amazon and couldn’t program both! I watched your video and pgrammed 3 remotes in a few seconds!! Thanks!!

@GarageMaxedOut 10 ай бұрын

Glad it could help!

@Kendall_Hanson Жыл бұрын

So many videos don’t discuss adding a universal remote to an existing remote. Thanks for the simple explanation. I was about to lose it before seeing your video….lol

@GarageMaxedOut Жыл бұрын

Glad it helped

@alexpham481 4 ай бұрын

Could not figure out how to connect 2 remotes until this video. Thank you so much bro!! You’re a life saver!!

@GarageMaxedOut 4 ай бұрын

Any time!

@carac8577 Жыл бұрын

Thank you!!! I've never had a garage before & trying to learn all the stuff about the door. This is super helpful ❤

@GarageMaxedOut 9 ай бұрын

Glad it was helpful!

@kathyfoster6795 Жыл бұрын

THANK YOU SO VERY MUCH!! I was getting ready to send these new remotes back to Amazon! Not now... thanks to YOU!

@GarageMaxedOut 9 ай бұрын

You are welcome!

@MrTmac2023 Жыл бұрын

thank you for the video! i have 2 remotes for my garage door. 1 has stopped working due to use. (Have to mash the button like 10 times for it to work) 1 works perfectly (the one i keep in the car). After watching this video, i think ill just buy a new remote and program it.

@tommyvaneimeren2427 Жыл бұрын

Great instructions for additional. I kept wiping out the previous... Thanks!😊

@GarageMaxedOut Жыл бұрын

Glad it was helpful!

@vernonhenry299 2 жыл бұрын

Thanks a lot man!!

@rafaelpena401 2 жыл бұрын

THANK YOUUU 💪🏼

@pinkpeppercorn8463 3 жыл бұрын

Explain clear and thanks ^^

@GarageMaxedOut 3 жыл бұрын

Glad it helped!

@juangooseman 11 ай бұрын

Really appreciate the contribution this would have been a hassle to figure out myself thanks for the video

@GarageMaxedOut 9 ай бұрын

No problem 👍

@adubs6646 2 жыл бұрын

Thank you!!

@jaysonr_9474 3 жыл бұрын

You a life saver thank you

@GarageMaxedOut 3 жыл бұрын

You got it!

@Danaelikedit 5 ай бұрын

So helpful. Literally just programmed my garage door remote to my opener. 🎉thank you

@GarageMaxedOut 3 ай бұрын

Glad it helped!

@egrojarom3846 2 жыл бұрын

Thank you so much for this video, just wanted to add, make sure you program your controller with the correct button color on the motor. I was trying to add another and because of this It wasn’t working

@borisr.5025 3 жыл бұрын

Could not be any easier. Thanks a lot.

@GarageMaxedOut 3 жыл бұрын

Happy to help

@kathleenwessels9992 2 жыл бұрын

Thank you helpful..

@jimt9593 Жыл бұрын

So helpful, Thanks !

@GarageMaxedOut 9 ай бұрын

Glad it could help!

@JDailyshorts Жыл бұрын

Super helpful, thanks!!

@GarageMaxedOut Жыл бұрын

Glad it was helpful!

@mosestoledo9184 2 жыл бұрын

Thanks 👍

@cavetr0ll Жыл бұрын

Good tutorial. Straight forward no bs.

@GarageMaxedOut 9 ай бұрын

Glad it could help!

@christianewing1113 Жыл бұрын

Thanks man! Didn't know it was that simple

@GarageMaxedOut Жыл бұрын

No problem!

@minhmanlam4235 2 жыл бұрын

Question: Is DIP swithches position in the second Remote the same or must be set differently with the first one? Thank you and look forward yr reply

@mrkonglang Жыл бұрын

Thank you. Appreciate you

@GarageMaxedOut 9 ай бұрын

Glad to help

@stevena.2306 4 ай бұрын

great quick video; perfect. Needed to reprogram remotes after I falied at setting up a useless keypad. But at least redoing this part was easy.

@GarageMaxedOut 4 ай бұрын

Great to hear!

@jaimebongoyan5501 2 жыл бұрын

If I have one liftmaster chamberlain remote and want to program another Clicker model KLIK1C remote control, will both remotes still will work

@coryring8524 8 ай бұрын

Question... I want to program 1 remote to 2 different garage doors. I have one programmed in. But the 2nd garage door won't program in. The opener light keeps flashing. Help!!! Everything is Chamberlain.

@Smiley-oz6ip Жыл бұрын

Thank you for taking the time to show me how to set good job buddy 👍👍👍

@GarageMaxedOut 9 ай бұрын

Thank you!

@chads.4272 3 жыл бұрын

Thank you brother! Awesome perfect Video!

@ansonzakai2062 3 жыл бұрын

I realize it is kinda off topic but does anyone know a good place to watch new movies online ?

@harleybronson843 3 жыл бұрын

@Anson Zakai I watch on Flixzone. Just search on google for it =)

@wadeace2350 3 жыл бұрын

@Harley Bronson yea, have been using flixzone for since april myself :)

@ansonzakai2062 3 жыл бұрын

@Harley Bronson thanks, I signed up and it seems like a nice service =) I appreciate it !!

@harleybronson843 3 жыл бұрын

@Anson Zakai happy to help :)

@metalcrow88 8 ай бұрын

Thank you.

@blackrainfire7465 11 ай бұрын

Very helpful thank you

@GarageMaxedOut 9 ай бұрын

Glad it was helpful!

@normantrotter8949 3 жыл бұрын

Great it worked the first time

@GarageMaxedOut 3 жыл бұрын

Good to hear

@gerytremaine488 Жыл бұрын

Great video!! Thanks!!

@GarageMaxedOut 9 ай бұрын

Glad you liked it!

@elvispresley6096 Жыл бұрын

Thank you so much!!!

@GarageMaxedOut Жыл бұрын

You're welcome!

@Modie2005 10 ай бұрын

thank you, it worked!

@GarageMaxedOut 9 ай бұрын

You're welcome!

@terrific804 Жыл бұрын

The two remotes I received have a more complicated procedure involving pressing a button on the back then pressing one of the buttons on the front twice depending on the color of the learn button on the door operator, in my case purple for the learn button. Then pressing and holding the learn button, the purple button, at the same time pressing the same button on the remote...one worked the other did not.

@kaleylb2696 2 жыл бұрын

Would this set up work for Linear replacement remote?

@jaybrown4857 5 ай бұрын

Thank you very much I’ll give two thumbs up.

@GarageMaxedOut 3 ай бұрын

Thanks!

@uncleron9481 Жыл бұрын

I have an Overhead Door operator that currently has 3 or 4 remotes paired. What is the max number of remotes allowed?

@rickuyeda4818 2 жыл бұрын

I have a Genie and bought 2 additional remotes. If I program one, it works. If I program the 2nd one, the first one quits working.

@annjansen4687 2 жыл бұрын

Thank you! :-)

@GarageMaxedOut 2 жыл бұрын

You're welcome!

@tulioalopez Жыл бұрын

Thank you 😃

@GarageMaxedOut 9 ай бұрын

No problem 😊

@Hobot1980 Жыл бұрын

Thanks! Easy peazy

@GarageMaxedOut Жыл бұрын

You bet!

@samuelmarx7221 2 жыл бұрын

Just saved me $170. Piece of cake!

@covertpuppytwo3857 3 ай бұрын

So how do you remove a button from syncing with a garage door? I had a spare unit that I now need. The installer for some reason had button 1 & 3 open garage door #1. I would like to remove garage #1 from button 3 and replace it with Garage door #2. I tried your step anyway, and now button 3 opens both garage doors. Great video BTW!!!

@gigahertz_1911 3 жыл бұрын

thank you kind GOOD sir

@GarageMaxedOut 3 жыл бұрын

Happy to help

@1zayawuzher311 Жыл бұрын

THANK YOUUUUU BROOOOO😊😊

@GarageMaxedOut Жыл бұрын

Glad it helped!

@terrific804 Жыл бұрын

I bought two. 1 programmed without a hitch. The other I can't get to work is there a way to reset it?

@yeseniarodriguez1707 3 ай бұрын

Does it matter what button you press the close or open one. The light doesn’t flash on mine

@dricjackson4902 2 жыл бұрын

On the remote did you press the left or right button?

@mikehill5301 3 жыл бұрын

So close yet so far .Second remote is bawking.

@GarageMaxedOut 3 жыл бұрын

What is it doing?

@basharmastafa17 Жыл бұрын

Thank you

@GarageMaxedOut Жыл бұрын

You're welcome

@garyamalan4426 3 жыл бұрын

Actual video starts @1:23

@GarageMaxedOut 3 жыл бұрын

Thanks for watching

@SabrineKsouri 2 жыл бұрын

Is there a maximum number of connected remotes that we can't exceed?

@rickuyeda4818 2 жыл бұрын

Genie claims they will accept 6 to 7.

@fffsub5688 Жыл бұрын

Thanks

@GarageMaxedOut 9 ай бұрын

Glad it could help!

@estjunk 2 жыл бұрын

Hi thank you for the video I have a quick question. once I was able to add the remote control for the door opener my touchpad no longer worked from outside. Am I able to use both the remote control or the touchpad that I have attached outside outside the garage? It's a 4 digit code...

@jamesplymire5342 2 жыл бұрын

Did you press and HOLD the button on the garage door opener or just press once?

@estjunk 2 жыл бұрын

I pressed and held...

@betspath 2 жыл бұрын

Where did you find those remotes for $12?

@robindawn 2 жыл бұрын

When trying to setup the outside keypad I wiped out my remotes. Now I’ll try to get the remotes working but how do I setup the keypad without doing what I did before? 😫

@okaythen001 3 жыл бұрын

My linear LD033 the clicker has to be within 3 feet of the opener for it to work, the learning light is always on, kinda flickering but always on. wall panel works. reprogrammed the opener, changed battery, clicker works on another door. erased memory and reprogrammed it, unplugged the opener and non worked, any tips

@GarageMaxedOut 3 жыл бұрын

I know this comment is old, but I was having similar issues after replacing the lightbulb with an LED one. Make sure the lightbulb is an old fashioned incandescent bulb and then try again.

@EddyV9 2 жыл бұрын

When I program the remote to the opener it takes 4 clicks to open and to close. I’ve tried different remotes and it’s the same result and I don’t understand why. I’ve cleared the memory of opener and reprogrammed remote and same result

@robintoski 2 жыл бұрын

I didn't hear what he said; can or can't program an extra remote with the circles on the front, (infinity sign?)

@sh0cknock10 6 ай бұрын

Hello. Thank you for the video. When you program a certain amount of remotes on an old Sears Red Learn Button (or other opener) does it start to erase previously saved remotes at some point? TYIA

@GarageMaxedOut 3 ай бұрын

No, unless you reset the unit

@her_majestyGold 2 жыл бұрын

What did I do wrong? Mine opens and closes alright but the door opens on its own after some time. 1 day, I woke up in the am and my garage door was open.

@dbhhattac Жыл бұрын

I have one remote for my garae door and I bought two more to be needed for other family members. The new remote I bought are compatible with my garage door opener ( Chamberlain). My question is if I follow your process as you show on the clip, to program the new remote it will not affect the existing remote and the car remote that I have been using now. From your video looks like it should not but I want to clarify.

@GarageMaxedOut Жыл бұрын

That’s correct

@ourv9603 3 жыл бұрын

All all replacement garage door opener remotes universal? Will any replacement remote work with any door opener? !

@GarageMaxedOut 3 жыл бұрын

No, you will need the correct remote for your opener- check the description for links

@thenightporter Жыл бұрын

How do you program if you don't know the code; my home's previous owner did not remember the code.

@stephp8761 3 жыл бұрын

I bought an older home that has a perfectly good Chamberlin garage door system (motor) it's older than 2005... only issue there was no opener given at closing, I tried to program a universal remote opener with no luck.... my question is could this motor just be too old to reprogram a new remote? Just wondering before I go spend $$$ on a new garage opener system. Thanks

@GarageMaxedOut 3 жыл бұрын

What color program button does it have?

@stephp8761 3 жыл бұрын

@@GarageMaxedOut it only has one "learn" button and it's green

@GarageMaxedOut 3 жыл бұрын

@@stephp8761 This is the one you need for a green learn button- amzn.to/3zfMA85

@stephp8761 3 жыл бұрын

@@GarageMaxedOut thank you!!!!

@segurostorresportalatin5944 3 жыл бұрын

Very good and simple to learn.

@GarageMaxedOut 3 жыл бұрын

Glad you think so!

@miriam43899 2 жыл бұрын

My Overhead 450A doesn’t have any little led of any color just a big old light bulb which goes on if I open the door from the doorbell and I don’t see any button to turn anything on or off on the unit Are you talking about a red led on the remote? If not Where is it? I can’t figure it out The old remote is all corroded inside so it is shot. It could be as old as 1988. The door still goes up and down by using the wall button but it’s not convenient.

@jacobhardin2946 Жыл бұрын

Help. We got a new keypad and finally got it working, then the remotes stopped working. All are different brands, can you help please.

@badiyazdi Жыл бұрын

I lost my remote control for my lift master so I went to home Depot and bought a new one (953EV-P2MC) to program. But following your step but it doesn't work

@manbearpig8691 2 жыл бұрын

Good video but I'm still at a loss. I have a 1997 Chamberlain Security +, 1/2HP Opener. It has a red programming button. Have 2 of the LiftMaster Security + remote openers. A 2011 Suburban with a 3 button opener by the mirror, and a 2019 Toyota with a 3 button opener by the mirror. I can't seem to get the trucks and the LiftMaster remotes programed to the same frequency so that all 4 will open the door. Can anybody point me in the right direction?

@GarageMaxedOut 2 жыл бұрын

Make sure you are using the right remotes, red button ones require these- amzn.to/3s7KJQt. If you are, first clear all remotes by pressing and holding the red button for 6 seconds- the light will go on and off. Once cleared, start adding remotes starting with the two hand held units. Push the button and quickly release, and your light will go on for 30 seconds. Hit the button on the remote, wait a second, and then hit the button on the remote again. If it took the program, your door will open or close. Repeat for the second remote. Once the two remotes are programmed, go to your vehicle with one of the remotes and follow the program procedure specific to your vehicle. For instance on the suburban, press and hold the outside buttons on the truck's opener and the light will flash rapidly after 20 seconds. Then, press and hold the button you want to program and the button on your programmed remote holding the remote 1-3 inches away. Hold until the light on the truck's opener starts flashing slowly. Press the truck opener to confirm the program took. Repeat for the other vehicle.

@devellwilson7099 3 ай бұрын

I have a Marantec Garage system . Can I purchase a universal garage remote like Lift master?

@GarageMaxedOut 3 ай бұрын

You’ll need this remote- amzn.to/3U0ujZR

@devellwilson7099 3 ай бұрын

Thank you .

@devellwilson7099 3 ай бұрын

I have one more question for you how do I re program the garage wall mount remote button unit in my case I have a 3 car garage martec

@darkblade289 Жыл бұрын

What if your remote was previously programmed to a different garage door house and now u want to program it to your new house. How do u erase and reprogram it to your new garage door? Tried a lot of things but nothing works.

@GarageMaxedOut 9 ай бұрын

Usually the common procedure is to hold down the first and third buttons for 10-15 seconds

@areklawas3420 2 күн бұрын

I need new remote (2) how to ordered?

@GarageMaxedOut Күн бұрын

What color button is on the back of your unit? For yellow order this one- amzn.to/3LrInGG. For purple order this one- amzn.to/4f5Qzdi. Alternatively, you can buy these universal remotes that work on many different colors- amzn.to/4f1zS2x. The universal remotes require an additional step at setup to change the frequency (usually, hold down 1 and 3 to change bands).

@Cosmic-Mind 7 ай бұрын

Thank you! I tried this and it didn’t work. My issue was figuring out what color my garage button was. My remotes also had instructions on the back that said I needed to press the back button, ( very tiny button) I suggest anyone read the instructions for their remote cuz the button color looked brown. Turns out it was purple 😅Mines are from Amazon 2 for $13 instead of 1 for $35😈

@youretheai7586 Жыл бұрын

Is that a low hanging ceiling fan in the back of you?

@GarageMaxedOut Жыл бұрын

For air flow

@ChristopherDillman 5 ай бұрын

2:02 - I get to this step, and nothing. No clicking. No bulb turns on. Nothing. Checked battery in the remote - brand new CR2032. Wall unit switch btw works fine. Reset the codes in unit. Tried this step again. Nothing. Thoughts?

@GarageMaxedOut 4 ай бұрын

Sometimes universal remotes are set up to have two channels. This requires you to change the channel prior to programming. It is usually the case that you’ll hold the first and third buttons on the remote until the led blinks. Then try the process in the video again and it should work.

@ChristopherDillman 4 ай бұрын

@@GarageMaxedOut Appreciate the reply. Turned out I needed a whole new clicker. I guess old clickers with fresh batteries go kaput. New clicker ordered from Amazon. Went through the programming steps. Voila.

@josephramirez3795 3 жыл бұрын

When you add a new remote I already have two remotes programmed do I have to program all of them all over again or just the new one?

@dboy6400 3 жыл бұрын

Just the new one unless you hold the Learn button for 30 sec, which will erase all remotes it has already learned.

@GarageMaxedOut 3 жыл бұрын

Up to your preference, I would just add one though

@GarageMaxedOut 3 жыл бұрын

Yup exactly

@euanfrewsnr2794 Жыл бұрын

I have an infinity type remote for my Chamberlain 2011 garage door. There is on one thing I need to know and that is the details of what remotes are compatible. Without this information the video is useless. I have tried every type of remote from Home Depot, Canadian Tyre including a garage door company and nothing works. I have googled this question and cannot find an answer. Not happy that this bit of key information is missing.

@GarageMaxedOut Жыл бұрын

It’s in the video- it’s all based on the color of your reset button. Check links in the description

@twayneday911 2 жыл бұрын

Can also buy from ebay (small store operators) or Lowes. I never buy anything from Amazon. Too much of a monopoly.

@bux49 3 жыл бұрын

Didn't work with my LiftMaster.

@GarageMaxedOut 3 жыл бұрын

Sorry to hear that

@denisethomas5791 2 жыл бұрын

Didn't work my learn button keep blinking

@vivito352 Жыл бұрын

Not working

@tone7560 2 жыл бұрын

Saaaaaweeeeeeeeeet

@PeterparkerSlaps Жыл бұрын

Lol wtf I just payed 135$ to get another pair installed. I feel scammed by the company who had the audacity to put their number on my garage button

@GarageMaxedOut Жыл бұрын

Yeah, it’s much cheaper to just do it yourself

@reaper121 Жыл бұрын

Thank You!

@GarageMaxedOut 9 ай бұрын

You are welcome!

@EduardoMartinez-et1tv Ай бұрын

*JESUS CHRIST LOVES YOU AND CARES FOR YOU HAVE A GOOD DAY EVERYONE*

@smokysmoky8467 11 ай бұрын

FIRSTLY AND MAINLY THXS TO OUR GOD MY FAMILY AND ME WE KNOW THAT ❤❤❤❤💯💯🙏🙏🙏🙏

@MsFreddyflores Жыл бұрын

It worked thanks

@GarageMaxedOut Жыл бұрын

You're welcome!

@MsFreddyflores Жыл бұрын

Thanks for this video so I will try it again

@GarageMaxedOut 9 ай бұрын

Good luck!

@MsFreddyflores 9 ай бұрын

It worked thanks

@purplebanana0 Жыл бұрын

So will the remote with the infinity symbol connect to a security plus opener? I just ordered one and it will not connect for some reason