Genius Technique of Polishing an Old Car Headlights | How to Clean Foggy and Cloudy Car Headlight |

Рет қаралды 4,004,126

2 жыл бұрын

Wow Amazing Work How to Clean Foggy and Cloudy Car Headlights | Foggy Headlights Restoration And Repairing process
#Foggy
#Headlight
#Restoration

Пікірлер: 883

@morcilla13 2 жыл бұрын

I used to own a headlight restoration business and is completely unnecessary to separate the lens from the housing, you only do that when there's really bad damage internally, or for customization. A rotary polisher with some 500 grit to 3000 sanding disks get the job done great, use some polycarbonate polish and protect with UV silicone based clear coat, the one that cures with UV rays. This guy's hands are working way to hard for this, also if headlights are on the car is the best way to work on them. I guess some of us like doing things differently, Respect to this man working hard and earning his money in a honest way.

@arypatrickz7237 Жыл бұрын

Agree

@HarpreetSingh-fq5it Жыл бұрын

Thats the reason you used to own it

@stefanov92 Жыл бұрын

That is exactly what i was about to write. If its not broken don't take it apart!

@jafarhon Жыл бұрын

Lucas all i can agree with is that he went the hard way and definitely earned his hard money.

@jesinu Жыл бұрын

I was wondering why he would risk breaking something when the lens could stay on. Oh well, it still turned out fine.

@JimmyMakingitwork 2 жыл бұрын

The yellowing occurs from UV clear coat breaking down, a barrier that protects the plastic. Sanding it off and polishing the plastic will have it looking like new for about a year. For best long term results it needs to be recleared with UV resistant urethane.

@vadmalski 2 жыл бұрын

Not even a year, under the scorching Indian sun not more than 2 month

@factnow6235 2 жыл бұрын

It only last for 2 weeks! India is a hot, dirty, polluted country bruhhh!

@tuchesampho2047 2 жыл бұрын

That's because UV clear coat cost extra the owner didn't want to pay for it

@cydonianman 2 жыл бұрын

Lasts about 3 months where i live. Unless i spray UV coating on it. Then it will last a year.

@AlexKunstar 2 жыл бұрын

Clearcoat is an absolute must.

@MrClingclong 2 жыл бұрын

You are saving money, saving materials, and saving the planet. Well done Sir.👏

@felixcertus2721 2 жыл бұрын

no he isn't... nor he is doing to save money or anything else you said there. the plastic shavings fall on the floor, then get blown around, they then get in a river and end up in the ocean, while in the ocean the plastic shavings will get absorbed by the marine life which we then ingest. thank you very much mr Light Polisher... he is not doing to save the planet, he is doing it to make money. dont be fooled.

@thelovertunisia 2 жыл бұрын

@@felixcertus2721 maybe but if it is thrown aways as it mostly is, it will end up in landfills where, in a dry country it will be eroded by dust and sand and become microplastic anyway so he is doing the planet a favour.

@felixcertus2721 2 жыл бұрын

@@thelovertunisia when reading with understating is unachievable. was I even replying to you?

@thelovertunisia 2 жыл бұрын

@@felixcertus2721 Think about it. only a very small part of plastic is really recycled the rest is dumped.

@brutushobbies 2 жыл бұрын

Looks better then new. Great job

@user-gf6hi7pe4j 2 жыл бұрын

И без покрытия лаком эта фара сдохнет через год, пластик пожелтеет уже вглубь и растрескается. Нужен лак с уф-фильтром.

@ser9ga592 2 жыл бұрын

Как правило, обычных 2к лаков для кузовни достаточно.

@febx4194 2 жыл бұрын

Колхозники, что с них взять

@gokungcu 2 жыл бұрын

Для покрытий с защитой от УФ-излучения требуется специальное решение Если не сделано на последнем шаге Лампы обязательно сломаются в течение 1 года и не подлежат ремонту и повторному использованию

@Axtycu4ka 2 жыл бұрын

Ждем видео через год как он получает люлей

@nicholascannon5001 12 күн бұрын

The lens looks great but half the fixings are broken and I bet the lens lets condensation in and fads .

@nirvanaofmonkasar1107 2 жыл бұрын

the yellow ting is due to the protective layer exposed to UV rays as times passes by the protective layer becomes yellow this should be protected by a layer of uv protector or the problem will come back and the plastic will become brittle.

@theriverStarCraft 2 жыл бұрын

Yeah that's what I was about to say. If they don't put on a layer of clear coat, the yellowish hue is gonna come back in a couple of months. Pretty much a waste of all his hard work.

@amasterofbation 2 жыл бұрын

He’s probably not charging that much anyway so having it done every couple of months wouldn’t be a bad thing

@cantcomeupwithausern 2 жыл бұрын

Even using a good cleaner wax will clean it up well and protect it for awhile.. any protection on palstic is better than nothing...

@SuperFELIX47 2 жыл бұрын

it would be great if it was covered with a layer of varnish after sandpaper.

@CherylCold 2 жыл бұрын

Yep, missed the most important part of the process there. Needs clear coat.

@Anex9286 2 жыл бұрын

I just want all you people out there, who can't wait to grab the next loose stanly blade with their bare hands and start ferociously ripping the surface of the headlight off... Don't!!! This guy is very skilled and has probably been doing this for a very long time, and I guarantee you if you snag the blade with that kind of force you're getting some deep lacerations.. enjoy!

@raidenchen6422 2 жыл бұрын

In my county, people usually replace it, not renewal, what a wasting! can't imagine we live in same planet👍 such a great work ！

@user-vb6vm3dc3w 2 жыл бұрын

Замена не всегда бывает качественной иногда лучше востановить оригинальную деталь

@Hi---There 2 жыл бұрын

@@user-vb6vm3dc3w Возможно они на новую оригу и меняют. Там это не деньги. Или ставят перед фактом, что с таким светом тех осмотр не пройдеш. А чел дупля не отстреливает, че да как. Идет к официалу и там по полной. Такое тоже может быть. Это у нас снять фару, перебрать, линзу вставить или поменять, ерунда дело. А там для многих это невозможное волшебство.

@user-fy3fy3zy3p 2 жыл бұрын

Super

@NeverTalkToCops1 2 жыл бұрын

No, wasting is spending over 20 hours of menial labor on a piece of junk.

@Hi---There 2 жыл бұрын

@@NeverTalkToCops1 One hour, it takes one hour, instead watching KZfaq.

@thereignman0120 2 жыл бұрын

he forgot to do the most important thing: to put on a clear coat.

@MrRaddoslaw 2 жыл бұрын

No. He did not forget.

@thereignman0120 2 жыл бұрын

@@MrRaddoslaw cool if he did it.. because i did the same thing on my headlight.. its like bnew again 🙂

@thelovertunisia 2 жыл бұрын

@@thereignman0120 Better no clear coat than a crappy one. I did that with my car here in Tunisia and the headlights yellowed in 3 months.

@harounben342 2 жыл бұрын

@@thelovertunisia you need one made for UV protection

@tommyjames7984 2 жыл бұрын

No le aplica. Clearcoat.para que regrese. Pronto en unos años.otra vez.y pueda ganarse otros billetitos.@

@EnDSemprini 2 жыл бұрын

the problem comes back if you don't apply some protection product.

@himanshushakya573 2 жыл бұрын

U mean lamination

@EnDSemprini 2 жыл бұрын

@@himanshushakya573 i use automotive varnish, high durability

@dalemettee1147 2 жыл бұрын

Anderson, believe it or not, just plain auto wax will help protect them.

@robustta5898 2 жыл бұрын

then just come back to this repair shop, while you can help them feed their children and education

@warriorplutotrent3827 9 ай бұрын

@@EnDSempriniwhat's the name

@haribabusubramanian 2 жыл бұрын

This guy is a gem!!! Love the way how the guy does not faff with his mouth and just let his work do all the talking!

@EduardoGonzalez-fb3jv 2 жыл бұрын

Augh yes! So many experts in the comments explaining the same method over and over. Very dull to read. This is something else lol Interesting, odd yet very effective!

@1959rossco 2 жыл бұрын

That headlight would have been straight in the bin at any car dealership I know of with a several hundred dollar bill and now I see that they can be made new with a few simple tools and a bit of practice. Great job

@york2600 2 жыл бұрын

@Minimal 100 times this. Just polishing an existing plastic headlight is a waste of time. I did this to my fogged up headlights. They looked amazing after a ton of sanding and buffing. They looked even worse 3 months later. You have to coat them when you're done.

@1959rossco 2 жыл бұрын

@Minimal Y You are probably right the longevity of this repair would not be high on the list ,it may well find itself in a box on the new head light shelf

@zapa47 2 жыл бұрын

Err dealers won't be tossing headlights out if money is important to them. You dont even need to pull most headlights apart or even pull them off the car to polish them.

@Howardtripper 2 жыл бұрын

What uv coating can you use

@antoniop3352 2 жыл бұрын

New headlights cost $700 minimum and twice to 3 times that for HED versions. Trashing is not happening, shops are selling them to restorers if not restoring thmselves.

@johnmorrison1180 8 күн бұрын

I think the comments regarding not being necessary to separate the clear lens from the reflector are missing the point, this headlight has most likely come from a auto wreckers and been in storage for some time. Dust and dirt have collected inside and needed washing out, note the soap powder and gentle washing. This guy is not an idiot he knew the inside needed attention as well as an exterior polish. Fantastic restoration.

@gamerelated3887 2 жыл бұрын

So satisfying to see someone take as much pride in their work as you do! Keep on reusing and repairing!

@TheCaptainmojo1973 2 жыл бұрын

Well seems like a lot more work than necessary. There are sanding and polishing kits you can buy for $20 US to achieve the same results with far less work and without needing to remove the housing from the vehicle. They even come with a clear coat to help greatly prolong the results.

@napke8571 2 жыл бұрын

Nope, not exactly correct. He is also polishing the inside, that is the part wich causes permanent decreased light strength. With those stupid 20 Dollar kits ( we also have them in Holland here) it is a very temporary fix.... Most people only polish the outside and they do it mostly wrong also. Another very stupid thing most car manufacturers ( or very clever!) do is that you cannot only replace the plastic front of your headlight! And if you do it by force or heat..... Well place it back after cleaning and in many cases your car will not pass the MOT check... So only option is to replace the whole unit :(

@iloveACID 2 жыл бұрын

The state off that headlight bs would one off them kits work.

@TheCaptainmojo1973 2 жыл бұрын

@@iloveACID ???

@jhlalremruata 2 жыл бұрын

The whole headlight assembly will sell again for abt $10. So.......

@stevienico452 2 жыл бұрын

He probably earns 20USD a month, and probably not an option where he is.

@rajchoudhary4349 2 жыл бұрын

Hats off to patience and craftmanship

@paularmstrong1501 2 жыл бұрын

Fantastic work, very satisfying to see the finished product and great to be restoring instead or throwing away. 👍🏻

@traeestpierre8697 2 жыл бұрын

I've been doing headlight restos for years and never once have I ever taking the lens off the housing in ruin the factory water seal that step is not needed and you definitely don't want to scrape your headlight lens with a razor blade and cut the plastic off of it definitely not the right way to do a headlight restoration all you need is some 500 Grit some 800 Grit some 1500 Grit and some 3000 Grit wet sandpaper to restore headlights when you hit him with the UV protectant clear coat and then you're done and then they stay clear for years to come

@2Truth4Liberty 2 жыл бұрын

I have a 1966 Ford f-250 and a 1975 Chev. Suburban and the original headlights on both of them are still crystal clear (glass). :-0)

@carloscantoran209 2 жыл бұрын

I was thinking the same thing with razor blade. Also couldn’t have distorted the housing with the blow torch.

@walixeikh4191 2 жыл бұрын

Most of the Car lights in Pakistan are not usually water sealed so he may not be wrong

@SaracuraZN 2 жыл бұрын

I rub lemon and baking soda on the lens, it improves a lot

@EduardoGonzalez-fb3jv 2 жыл бұрын

This man has his own method of restoring headlights, who cares the manner in witch he does his job! He did a great job, odd but great. Just look at the results! Impressive i must say.😁

@hmroa3056 2 жыл бұрын

This is not a technique. This is a process. Excellent work but more than a simple technique.

@albertocamachoquintana9300 2 жыл бұрын

In México they polish them at the parking of the supermarket while you do your shoping. 10 dollars.

@01kryos 2 жыл бұрын

A mí siempre me ofrecen ese servicio, pero mi auto tiene faros de vidrio, ya es un clásico XD

@muto_mt 2 жыл бұрын

Делай так два раза в месяц и фара потеть не будет:D

@NeonAstralOfficial Жыл бұрын

Да и таким темпом через год твоя фара будет тонкостью бумаги

@sheri2845 Жыл бұрын

Fantastic! Looks great! God bless you guys!

@MisterFuturtastic 5 күн бұрын

Great... now all I need is a big a$$ industrial buffer that I only use to polish my headlights every 10 years. lol ;)

@02autogt Жыл бұрын

If only Indians in the US would put that much effort into keeping their convenience stores clean... Awesome job!!!

@joesemansmmr41 2 жыл бұрын

To me who love to restore old motorcycle, this technique will help me a lot. factory parts always the best quality.

@masautomx2131 2 жыл бұрын

This is the best technique I've seen in my life

@octymocty132 2 жыл бұрын

Never polish the silver reflector ( its atomised ally and will rub off )

@g1m250 2 жыл бұрын

Exactly 👍🏻

@blazerwilliams2260 2 жыл бұрын

I actually just do the outside without removing it from the car and people seem to love it, no need to access the inside. The hell with all the extra stuff this guy did unless he's getting paid really good and I doubt it.

@pkennedy4256 2 жыл бұрын

The reason he doesn't apply UV protectant is called job security!

@atifriaz6551 2 жыл бұрын

Like any dealership would have done that. They are recycling plus saving the bucks. And that is admirable.

@walixeikh4191 2 жыл бұрын

Because people dont pay them for uv protection being a Pakistani i know that they ask if we want UV protection coat that is like 5$ more but people often neglects this

@chariabawla 2 жыл бұрын

Haha

@judgedredd9236 2 жыл бұрын

No , probably it means the customer is being cheap.

@walixeikh4191 2 жыл бұрын

@@judgedredd9236 exactly

@maherimadibo5723 2 жыл бұрын

Amazing work 😍🥳 wish that some one can do this in my city 😅✋

@stevedavis2541 2 жыл бұрын

Great work. To do this is very labour intensive and to charge for your time to do it would or could be more than the price of a new light unit I my country. Restoring the unit is the right thing to do but economics of where you live dictate this. Great work by this young man thou

@SnuggleBear1970 2 жыл бұрын

Using a buffer was unexpected. Good job!

@iforms9061 2 жыл бұрын

The amazing guy: uses a flamethrower, a screwdriver and a polishing tool. Awaits the customer back in 3 months. A common headlights restoration pro: uses an oven, a special hook-like knife tool and/or Dremel cutter, a syringe with a butyl glue deactivator while opening, a set of polishing tools and abrasives of a different grit, a clear coat increasing transparency, a polyurethane film protecting the polycarbonate from UV aging and flying rocks, a new butyl rope or a butyl hot melting machine with a hot nozzle, cleaning vents and checking for leakage with a pump and soapy water. Awaits the customer back in 3 years.

@nehemiasdasilva8817 2 жыл бұрын

👏👏👏👏👏👏👏👏👏👏parabéns aqui do Brasil, Deus os abençoe 👏👏👏👏👏👏👏👏👏

@nickyocean 2 жыл бұрын

Hard work, beautiful result 👍🏻🏆💯

@maguslloretmunoz2354 2 жыл бұрын

What a great piece of work!!!! CONGRATULATIONS MISTER

@Cobra3901 10 сағат бұрын

I’ll stick with the chrome polish and a buffer wheel followed by a couple coats of wax to keep it from getting hazy again. Lasts me a couple years. A lot easier than all that screwing around.

@UTarcher72 2 жыл бұрын

No need to take it apart, now he has ruined the seal and water will get inside. It's best to wet sand it with fine grit sand paper and finish on the buffing wheel. Should be done in 10 minutes or less.

@panemamen 2 жыл бұрын

Urethane can pefectly re seal it

@ahoorakia 2 жыл бұрын

that's the dumbest way of doing😁😁😁 for many reason !- they did not use sealant to put it back together, so it will leak 2- they have no idea why they get yellowish!! it's the clear coat on top of plastic cover that turn yellow!! 3- so if you you don't use proper plastic clear coat it won't last more than few moth and and get destroyed to the point of no return😁😁 that's the dumb thing most ignorant people do even in western countries, they just sand and polish without using proper clear coat

@sammyrphillipe 2 жыл бұрын

Tem uma questão, o plástico tbm amarela por dentro! E precisa lixar e polir por dentro para ficar perfeito... Minha moto eu fiz só pra fora e não foi suficiente

@N16Ken 2 жыл бұрын

Guess it faded a little on the inside as well?

@iforms9061 2 жыл бұрын

@@panemamen The headlights are sealed with a butyl (sold as a coiled rope). To check it for a leak you can close all holes, coat the headlight seals with a soapy water and blow inside with a pump. As easy as checking the tyre. Be sure this video fix will foam all around)))

@viktorvezdenetskyi7819 2 жыл бұрын

Great technic the only thing I'm not sure if using the old glue would be a good idea it won't be sealed properly

@manueltuset 10 ай бұрын

Amazing work. In poor countries people is extremely creative. Congratulation from Guayaquil - Ecuador

@jorgeamartineze120 2 жыл бұрын

Congrats. Amazing job. May I ask, for how long lasting like new? (in my opinion, I rather pay for rebuild or fix than paying for "new")

@haraldalbrecht6133 2 жыл бұрын

Wow , you are so an great Artist - thanks to show us all in the whole world 🙏🙏❣️. Great 👍 respect and best regards to you & your family from Germany 🇩🇪👋👋

@pashekkooficial6157 2 жыл бұрын

EXCELENTE TRABALHO PARABÉNS .

@aamirsyed5113 2 жыл бұрын

Nice work, consider a uv top coat to make it more durable.

@Bayuhutamamotor Жыл бұрын

Fantastic work, very satisfying to see the finished product and great to be restoring instead or throwing away.

@jeroendesterke9739 2 жыл бұрын

O yes, I can see that headlight never fogging up when the monsoon starts.

@okom69 2 жыл бұрын

This Guy IS Amazing !!! 👍

@Grantly 2 жыл бұрын

Wet sand and buff could have had this done much quicker. Without ever ruining the seal and taking it apart. Fair play for putting the work in though.

@victorcalderon2986 2 жыл бұрын

Exelente trabajo 👍 bendiciones

@NeVsemAWWosem 2 жыл бұрын

Тяжелый ежедневный труд. Уважение трудягам

@suradirabawi2775 2 жыл бұрын

Bening / terang Top lah 👍👍👍😆😆😆

@serdarkancan 2 жыл бұрын

Thank you for not using background music

@eizomonitor6003 2 жыл бұрын

My heady was done 10 years ago with UV protection, still fine. That one last, maybe 4-5 years at max.

@jimmyfleebot 2 жыл бұрын

Probably less in a hot country like that. I give it a year before the plastic starts to break down through the entire cross section of the lens. Needs 2k UV clearcoat

@edsonnishimura3598 2 жыл бұрын

Muito bom 👍

@danpopsy 2 жыл бұрын

Here in 🇳🇬, our guys mostly buff/sand headlamp without removing or separating any part of it and they spray it to give it a glossy look, and it becomes new lamp

@isaiahwelch8066 2 жыл бұрын

Word of advice: Instead of a razor blade, you can achieve the same results with wet-sanding the lens with a rotary sander, like a Dremel, and using a grade of sandpaper that is fine enough to not take as much material off. The amount of plastic he is shaving off is detrimental to being able to actually do the job again, as car lenses are susceptible to yellowing over time, even if this is done.

@metehanturkyilmaz5707 2 жыл бұрын

Satisfying finish , well done 👍👍, looks like continent Asia , probably india or whatever. It seems that they're doing it for some kind of necessaties. The result is awesome , however as I can see lots of labour , lots of chemicals , lots of time , some amount of electricity and gas has been used. May be beneficial for us , for them but not for Europe and U.S.

@Richie8756 Жыл бұрын

That was impressive! It doesn’t take much to get the job done 👌🏽

@gurubuzzzz 5 ай бұрын

Years of experience and manual dexterity

@cb400fhonda6 2 жыл бұрын

Zabardast Fantastic wali chai

@cesaranjos8184 9 ай бұрын

Ja sou inscrito no canal E estou acompanhando todos Os seus videos show de bola.. Gostaria de saber qual nome Dessa espoja para polir . Gosto de aprender , com os nossos vizinhos do outro lado.. Meus parabéns 👏 pelo excelente trabalho 👏

@ganeshmudaliyar4056 2 жыл бұрын

Great respect and love from India 🇮🇳

@mdnazimul4980 2 жыл бұрын

These effort should be appreciated by government... Best execution of skill development... Stop promoting commercialisation...promote skill development.

@-Atif- 2 жыл бұрын

Im a dealer in US and we go through a basic restoration on headlights that does not require opening them.

@warrenvitters3983 2 жыл бұрын

Nice job! We are too lazy in this country to do it that way.

@user-du7sx4uw6s Жыл бұрын

Работа профессионала с большим опытом работы. Нож и газовая горелка - это как в цирке, чуть ошибся и все. Не советую повторять. 👍

@keondaguero 2 жыл бұрын

El proceso de curado/protección es aplicarle luz UV por unos minutos, según he visto como lo hacen en las fábricas de material plástico q van a tener exposición al sol.

@tanghringonesoul383 2 жыл бұрын

Nice work... But those repaired headlights wont last long because the protection layer is gone.

@user-er6kv9gu1i 10 күн бұрын

Good job 👍

@72Tyumen 2 жыл бұрын

На следующий год опять будет восстанавливать фару. Защитный лак не нанёс на стекло. К корпусу приделал без герметика.

@MichaelClaytonCo 2 жыл бұрын

Awesome job reclaiming instead of another carbon footprint. These guys are amazeballs.

@tomjones8608 2 жыл бұрын

(Face palm)

@Antoniosillva 2 жыл бұрын

O cara é bom👏👏

@MrJeepCanada 2 жыл бұрын

I know that glass repair places in Montreal have machines that restore your headlights covers to new pretty much what he does in this video.

@0DarkenBlack0 2 жыл бұрын

Mi carro tiene faros de vidrio... Mas de 20 años y siguen intactos.. Creo que el problema es que los hacen malos hoy en día 🤣

@bobavon6048 Жыл бұрын

The shiny chrome coating in most headlights is put on through a process called.vapor deposition. Any rubbing on that coating will remove it. Though in this video it didn't come off meaning it was probably chrome plastic.

@stuCameraman1 2 жыл бұрын

I've done mine and my friends headlights. I use dry 1000 grit sand paper, then wet sand 1200 grit, then with a drill and polish foam pad I use halfords compound rub, then normal car polish with drill and foam pad until clear. No taking it apart.

@MediaTruth_ 2 жыл бұрын

WOW! Make due with your skills that God has given every human.

@adilsonpires6810 2 жыл бұрын

Parabéns!

@user-uv6qi7yn9z 15 күн бұрын

Wow,,mega!!❤❤😊

@williamwilliam6714 2 жыл бұрын

Lots of things in my life, could use this level of rejuvenation...

@fifiby 2 жыл бұрын

Très bon travail félicitations

@dannmann17 2 жыл бұрын

That light turned out nice👍🏻🇺🇸

@JeffCarbuoy 2 жыл бұрын

Amazing work for sure, keep it going even my self I just uploaded how to change headlight bulb 💡 Now my car can see at night

@spiralnapkin 2 жыл бұрын

You can't not appreciate some good old fashioned elbow grease to avoid throwing things away into a landfill. Also, I can't imagine letting my headlight housing get this bad.

@Leto4900 Жыл бұрын

This is very skilled man Congrats on your great wonderful job bro. 😍👍

@sddiymakeitworthit7512 2 жыл бұрын

Beautiful workpiece

@Hamza-pk4qs 2 жыл бұрын

What material did you use on the suction machine?

@sidneiaxn258 2 жыл бұрын

A limpeza é legal, mas não vai durar muito, porque o plastico já degradou e mesmo tirando a camada opaca em pouco tempo volta a ficar.

@EduardoGonzalez-fb3jv 2 жыл бұрын

So many experts in the comments explaining the same method over and over. Very dull to read. This is something else lol Interesting, odd yet very effective! Incredible results, congrats! 👌🏻

@MachTuck 2 жыл бұрын

Great job man! here is the USA all they do is change parts, nobody fixes things, consumism!

@m.zahidiftikhar6818 2 жыл бұрын

People commenting negatively without understanding anything, & only to get rid of their frustations. 1. The residual sealant is quite enough to prevent leakage. If not, more can be added. Even if this does leak, what is the worst that'll happen. Get a grip people. 2. In the West the whole of the light would be thrown away & not recycled. 3. People worried about detergent being used probably don't wash their clothes. Maybe they don't use soap either. 4. Plastic shavings end up in landfill, nit a river. Lahore has a proper waste management system. 5. The guy is poor, alright. But he'd be unemployed if he were'nt doing this; someone else would be doing this instead. So, he is doing it for money, not the environment. But his skill & impact ought to be appreciated. He is making an honest living.

@rafaexposito1043 2 жыл бұрын

Muy buen trabajo

@TanveshDabholkar Жыл бұрын

Little does this worker know that such detailing videos fetch millions of views in KZfaq. He can earn a lot more than what he is now.

@petershulick5270 2 жыл бұрын

Nice technique but they should be turning the reflector upside down to keep from getting debris and stuff inside of it,

@Ntplano 2 жыл бұрын

Great job from a great skill full person.

@georgegonzalez2476 2 жыл бұрын

Good job, but it can be done easier and safer right on the car with a buffing wheel. And a coat of UV protector will preserve the lens for years. Left uncoated it will yellow and cloud again in about 9 months.

@jackcameback 2 жыл бұрын

honest days work - respect young man

@hugogonzalez7441 2 жыл бұрын

Excelente trabajo sin desmerecer su tremendo trabajo. Explico algo Que vi en varios trabajos así. Al pulirlas ópticas Le sacas un esmalte que llevan y al sacarles eso Vuelven a opacarse nuevamente. Lo demás un enorme trabajo mis respetos y saludos desde argentina Tucumán....

@mamdirar8464 Жыл бұрын

A protective layer must be applyed on the external surface.

@jessepeterfenton3973 2 жыл бұрын

Looks great needs protection against UV Rays or it will Change relativly quick again

@leoh6596 2 жыл бұрын

Good wax applied yearly might help stop UV

@jessepeterfenton3973 2 жыл бұрын

@@leoh6596 wax doesnt Help much on Plastic from my experience. Sonax useto sell Something in a small package that definately Help but has to be used every 2-3 months. Next Option would be instead of polishing them after sanding is to Prime them with a Plastic Primer and Spray with a 2 compound UV resistent clear coat did it on a Car where the were way too expensive. Great results Had the Car for about 4 years after with No Problem.