German gray is difficult. - 38(t) - Part 2 - Tamiya - 1/35 - Tank Model - [Painting

German gray is difficult. - 38(t) - Part 2 - Tamiya - 1/35 - Tank Model - [Painting - weathering]

Рет қаралды 31,910

Жыл бұрын

The basic color of this 38(t) is German gray. There are various colors of tanks, but the color that I think is the most difficult is this German gray. All weathering work is very sensitive to its effects and results. What you often see is weathering that is extremely whitish and faded like winter camouflage as a result of excessive dust and fading. Also, it is easy to apply a large amount of pigment or mud to make the surface extremely dirty, but it may be a difficult subject to complete rationally controlled weathering with a high degree of perfection. And personally, my thoughts on making 38(t) this time are the same as before, and the conclusion is that "German gray is difficult after all."
やはり、ジャーマングレーは難しい。
今回の38(t)の基本色はジャーマングレー。さまざまな色の戦車がありますが、私が一番難しいと思う色がこのジャーマングレーです。ウエザリングの全ての作業に対し非常に敏感にその効果と結果が反映されます。よく見かけるのは、過剰な埃や褪色表現の結果、まるで冬季迷彩のように極端に白っぽく褪色したウエザリング表現です。また大量のピグメントや泥を塗り込み、やたらと激しく汚してしまうのは簡単ですが、理性的にコントロールされた完成度の高いウエザリングを完結させるには、やはり中々手強い題材かもしれません。そして私自身、今回38(t)を作って思うことは以前と変わりなく「やはり、ジャーマングレーは難しい」っと言うのが結論です。
------------------------------
All Lies by Loxbeats spoti.fi/34tPBBO
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/-all-lies
Music promoted by Audio Library • All Lies - Loxbeats (N...
------------------------------
Track: Freed - Land of Fire [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Freed - Land of Fire |...
Free Download / Stream: alplus.io/freed
------------------------------
The Reckoning by AERØHEAD / aerohead
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/the-reckoning-aerohead
Music promoted by Audio Library • The Reckoning - AERØHE...
------------------------------

Пікірлер: 131

@panzer-meister Жыл бұрын

お疲れ様でした。いかにも ” 鉄 ” って感じで、最高です。

@smc-2 Жыл бұрын

ジャーマングレイには苦手意識があったので、少々苦労しましが、とりあえずどうにか満足のいく仕上がりに漕ぎ着けました。ホッと一安心です。いつもコメントありがとうございます。👍

@jamescasaccia9597 11 ай бұрын

Very inspiring work. You have brought that dull German gray to life. Thank you.

@smc-2 11 ай бұрын

I'm glad you enjoyed it. Thanks for your comment.🍦🍦🍦

@littlejimmy2855 Жыл бұрын

Awesome work, so authentic a master piece.

@smc-2 Жыл бұрын

Thank you.🍺👍

@steeliron8246 Жыл бұрын

Great tutorial, awesome weathering, the end result is awesome. Perfectly done!!

@smc-2 Жыл бұрын

Vielen Dank für Ihre Kommentare. Vorerst bin ich erleichtert, dass das Finish einigermaßen zufriedenstellend ist.🍎

@zov8096 Жыл бұрын

Hello! Everything is phenomenal as always! 👍

@smc-2 Жыл бұрын

Thank you.👍😄🍎

@bliznecov_models Жыл бұрын

Работа СУПЕР!!!!👍🏻

@smc-2 Жыл бұрын

Я рад, что тебе понравилось. Спасибо.✋

@ModeliteDiorama Жыл бұрын

Love the result and the music choice for your video!

@smc-2 Жыл бұрын

I'm glad you like it. Thank you.👍😄🍎

@reefingaround4435 10 ай бұрын

You are getting better. Keep at it.

@smc-2 10 ай бұрын

Thank you for your comment.🍺🍺🍺

@user-fu3zn9hg8b Жыл бұрын

The difference from other KZfaqrs is realistic and accurate. It's pretty cool. 他のKZfaqrとの違いはリアルで正確です。とても素敵です。

@smc-2 Жыл бұрын

そうですか、ありがとうございます。✋

@josecesar8657 Жыл бұрын

That looks awesome!

@smc-2 Жыл бұрын

Thank you✋

@alfonsocardenas4118 Жыл бұрын

As always learning with your videos, good job greetings from Puebla Mexico

@smc-2 Жыл бұрын

Thanks for your comments.😄

@sergiobarbosavieira6676 Жыл бұрын

Parabéns pelo ótimo trabalho. 😄💯💥👍

@smc-2 Жыл бұрын

Obrigado como sempre.🍺🍔🍔🍔

@lmmodellismomilitare Жыл бұрын

Nice tutorial! Thank you!

@smc-2 Жыл бұрын

Thanks for your comments, always appreciated.😆

@gra16fun Жыл бұрын

an excellent model turned out. please assemble tiger 1. -------------------------------------------------------- отличная модель получилась. пожалуйста собери tiger 1

@smc-2 Жыл бұрын

I can't promise when, but I want to make a Tiger 1 with a manufacturer other than Tamiya, and I'm collecting various information. Thank you for your comment.😆 . . . . . . . . . . . . Я не могу обещать, когда, но я хочу сделать Tiger 1 с другим производителем, кроме Tamiya, и я собираю различную информацию. Спасибо за ваш комментарий.👍

@thedamienharveygroup7014 Жыл бұрын

Your models are stunning-maybe best I've seen on the internet.

@smc-2 Жыл бұрын

Thank you. But maybe that's a little too much praise.😆

@user-wn5id7qi8w Жыл бұрын

I think the same

@smc-2 Жыл бұрын

@@user-wn5id7qi8w Thank you👍😄🍎

@nikenphotog 4 ай бұрын

Great job on this 38t,I like your style.I also like to pack mine with stuff ! Wish I could fine some netting like that.

@smc-2 4 ай бұрын

For some reason, it's strangely fun to load your luggage while being creative. I can't quit. Thank you for your comment.🍮🍫🍬

@amentia_bellum Жыл бұрын

Шедеврально-вот всё,что я могу сказать!

@smc-2 Жыл бұрын

Спасибо.😄🍺👍🍎

@amentia_bellum Жыл бұрын

@@smc-2 ,сколько вы занимаетесь моделизмом?

@smc-2 Жыл бұрын

@@amentia_bellum Когда мне было двадцать с небольшим, я занялся изготовлением пластиковых моделей и, естественно, бросил это занятие в тридцать с небольшим. Прошло три года с тех пор, как я снова начал строить модели в масштабе, когда стал старше. Возраст - тайна.🍺

@wernernel7223 Жыл бұрын

Another masterpiece..

@smc-2 Жыл бұрын

Thank you.👍

@normangebhardt Жыл бұрын

Great work!

@smc-2 Жыл бұрын

Thank you👍

@zachnar0125 Жыл бұрын

Well done!

@smc-2 Жыл бұрын

Thank you.😄

@Isen502 Жыл бұрын

Looks a lot like Payne’s Gray. Excellent job.

@smc-2 Жыл бұрын

Thank you.👍🍺

@markmaccallum4192 3 ай бұрын

Thats awesome man !!

@smc-2 3 ай бұрын

Thank you for your comment.🍺🍺🍺

@frankprins3525 Жыл бұрын

Can you make a mini figure tutorial. The tank commander looks so fresh! Keep up the good work

@smc-2 Жыл бұрын

Filming the painting process of small figures doesn't work very well with my current equipment. Please understand that we are currently in the process of trial and error. Thank you for your comment.😄

@CWModelling Жыл бұрын

Superb 👍

@smc-2 Жыл бұрын

I'm a fan of CW Modelling's channel. I am very happy to receive your comment. Thank you.😄

@joseluisflorgarcia8753 7 ай бұрын

Perfect kamarada

@smc-2 7 ай бұрын

Teşekkür ederim.🍰🍰🍰

@leesouter9627 Жыл бұрын

Excellent build, now you need to do a diorama for it.

@smc-2 Жыл бұрын

Thank you. But now I don't have time to make a diorama. It's still a long way off, but when I retire from work and have free time, I definitely want to take on the challenge.😆

@gerardcaillou5663 Жыл бұрын

Salut je vous regarder de France très beau modèle je le fais Au 1/16 Panda model j'ai une très belle source inspiration avec votre vidéo merci a tento Gégé 62 👍👍😉

@smc-2 Жыл бұрын

Merci pour votre commentaire. Je suis content que ça semble te servir.🍎

@uselesswatcher1 Жыл бұрын

Ok sorry I gotta say your exhaust looked better before putting pastels on it, or blend pastels more? That said I can’t do what you do, amazing work. A firm follower of Night Shift, don’t tell him I said “your work might be better”😊

@smc-2 Жыл бұрын

I am also one of the fans of Night Shift. Thank you for your comment.🍺

@rrl4245 Жыл бұрын

Great build, and excellent video. That little tank model came out looking great! One comment: I believe that when the Panzerfaust came into use, in mid-1943, the 38t was obsolete and no longer in use by the Wehrmacht. You should remove them from the stowage on the rear deck.

@smc-2 Жыл бұрын

Thank you for your comment.😄

@smc-2 Жыл бұрын

PS. Thanks for letting me know. However, due to the nature of KZfaq, once a video is uploaded, it cannot be fixed. note that.

@rrl4245 Жыл бұрын

@@smc-2 No need to change. It remains a great video of a brilliant build.

@smc-2 Жыл бұрын

@@rrl4245 Thank you🍎

@jackjufer9776 Жыл бұрын

Another fantastic build. I am curious though as to how you made the tarps.

@smc-2 Жыл бұрын

The tarp was made by shaping tissue paper with wood glue. Thanks for your comment.🍎

@user-wn5id7qi8w Жыл бұрын

Bro I was waiting for this video, you are even better than Plasmo and Night Shift!!

@smc-2 Жыл бұрын

Isn't it a little unreasonable to compare with Plasmo and Night Shift? Their career as a KZfaqr is amazing, and they have a wealth of knowledge and techniques, and I myself have learned a lot by watching their videos. But thank you for honoring me. I'm happy.😄

@user-wn5id7qi8w Жыл бұрын

@@smc-2 trust me, your career will be successful. I’m a modeler too, and I can’t even reach the techniques you have and I know how hard and expensive is to modeler

@smc-2 Жыл бұрын

@@user-wn5id7qi8w Thank you. I will continue while enjoying it. I look forward to working with you.🍎

@user-wn5id7qi8w Жыл бұрын

@@smc-2 you’re welcome, I know about new techniques for make a realistic wood box even better than plastic ones, made of wax. I would like to share to you that techniques, how can I?

@smc-2 Жыл бұрын

@@user-wn5id7qi8w How about Фабрисио Вилла also post a video on your channel? Instead of opening to the general public, I think it would be better to make it a limited opening so that only specific people can see it by emailing the URL of the page. My email is on my channel's overview page. If that is not possible, you may email me and let me know.😄

@anthonycollingridge970 Жыл бұрын

Fantastic build as always. Can I ask when you apply the Tamiya Enamel paint for the rust effect, what are you using to thin it down and manipulate it?

@smc-2 Жыл бұрын

I use Tamiya's enamel paint solvent [X-20 THINNER].👍

@wizardid608 Жыл бұрын

Hey! nice work as always. What did you put on the rust effect after you applied it? is it an enamel thinner or something? I also thought the enamel rust would attack the acrylic paint you applied before. Does that mean enamels and acrylics can be used together without one removing the other?

@smc-2 Жыл бұрын

Rust is applied with enamel paint and washed with enamel solvent. Enamel solvents will not damage acrylic or lacquer-based paint films. Thanks for your comment.👍

@DieTabbi 11 ай бұрын

Nice artwork and show your great skill, but do you make it from your fantasy or do you think any real tank in WW2 would have ever looked like this?

@smc-2 11 ай бұрын

Well, how about it? I'll leave it to your imagination.🍦🍦🍦

@Kojak0 Жыл бұрын

Yeah, German grey is tricky, mainly because it's so close to black without actually getting there, and one issue I have with a lot of modellers is that they paint it way too light; early war tanks were very well maintained and thus kept their color, so forget sun-bleach, and for that matter, spots of rust as well - during ww2 tanks were painted with lead-based paint which is hard as hell, and they didn't bother with thin layers either - I think 1/10 mm thickness of paint could be applied all in all with primer, base and varnish (yes, tanks had a certain glossy sheen to them), and it's pretty difficult to wear that down, except where there's a lot of traffic, ie around hatches, and they you would mainly have bare metal, not rust per se. Also, what is it with modellers and rusting up the muffler? It came painted from the factory and even if the metal was cheap and thin, it still took some time for the paint to burn off (calling it rust is not quite right, since its caused by heat, and rust as we know it is caused by moisture).

@smc-2 Жыл бұрын

Thank you for your valuable opinion. As for the rust on the muffler, I used the rust on my bike's muffler as a reference. Whether or not it was appropriate is subjective to the person who sees it, so it's very difficult for a modeler. We will use your comments for future reference. Thank you for your comment.🍰

@seorwulf1049 Жыл бұрын

The skill involved in this model and its finishing is outstanding and far beyond anything I could achieve but I agree with you, I find so many modelers these days get really carried away with the techniques at the expense of realism ( which is of course personal choice) the war only lasted 5 years and not many tanks made it the full period, I have not been able to find any historical pictures that show rusting and especially chipping to the extent modelers seem to want to go to these days. As you mention many still look close to brand new with mud and grease (on running gear) being the only major "weathering apparent". Still, as I said - it's a personal choice thing I guess.

@thegigactus3234 12 күн бұрын

Did you use the Enamel x-22 clear gloss for the finish before putting on the decals? Great work by the way!

@smc-2 12 күн бұрын

It's not enamel. I used Tamiya's acrylic paint X-22 Clear. Thanks for your comment.🍔🍟🥤

@mauriciomaruri740 4 ай бұрын

I like your Job! I am new...I have a doubt.....The panel Line does.not reactivate with whater or othera paints???

@smc-2 4 ай бұрын

It will come off if you rub it too hard, but there is no process that involves rubbing too hard after adding the panel lines, so there is no problem.🥝🍉🫐🍎🍌

@brunomooser1204 Жыл бұрын

So fine..what airbrush do you use?

@smc-2 Жыл бұрын

Tamiya Airbrush System No.14 Spray Work HG Super Fine Airbrush 74514. The nozzle diameter is 0.2mm. 👍

@yukimei2012 6 ай бұрын

質問で完成品で銅のワイヤーがヒモみたいにマットぽい質感になっていますがあれは塗装をしているんですか？良かったらおしえてほしいです！

@smc-2 6 ай бұрын

塗装をしているはずです。何も処理をしないで素のままの素材をそのまま使うことは滅多にないと思います。コメントありがとう。🍺🍖 🍖 🍖

@martingates1364 5 ай бұрын

Im reading some very picky comments here IT LOOKS THE DOGS BILLHOOKS Well done

@smc-2 5 ай бұрын

Thank you for your comment.🍈🍅🥝🍌

@ArmorStudioNYC Жыл бұрын

Is the Weathering paste thinned with solvent prior to application?

@smc-2 Жыл бұрын

In most cases, it is used after being diluted slightly. However, if you want a powdery touch, there are times when you use it as it is without diluting it.✋

@ArmorStudioNYC Жыл бұрын

@@smc-2 thanks! I appreciate the help!

@smc-2 Жыл бұрын

@@ArmorStudioNYC you're welcome. I am happy to be of help.👍

@quadegermany2200 5 ай бұрын

How did u put that wire on the turet for the water bottles and bags

@smc-2 5 ай бұрын

I added a small hook to the turret to string the wire.🍎🍏🍎

@Rainbow_factory728 Ай бұрын

♡★♡★♡★♡

@smc-2 Ай бұрын

👍🍺🍺🍺

@frankcheung801 Жыл бұрын

Hey! What‘s the airbrush?

@smc-2 Жыл бұрын

Tamiya Airbrush System No.14 Spray Work HG Super Fine Airbrush. The nozzle is 0.2mm.🍰

@user-yj3vr6ci1t Жыл бұрын

Привет из Казахстанв!Маслянными точками вы не пользуетесь или это осталось за кадром.

@smc-2 Жыл бұрын

Я не думаю, что масляные точки - очень эффективная техника. Я не использую эту технику, но есть и другие способы добиться подобного эффекта. Спасибо за ваш комментарий.✋

@user-yj3vr6ci1t Жыл бұрын

Да я тоже не всегда её применяю.Удачи!

@user-kr1dt9su3t 13 күн бұрын

Hi, right at the end of the video you applied pastel dust to the bodywork. What solution did you use to seal it please?

@smc-2 13 күн бұрын

It has been established with Tamiya's THINNER for enamel paints.🍉🍉🍉

@user-kr1dt9su3t 13 күн бұрын

@@smc-2 thank you very much, great model and finish

@smc-2 13 күн бұрын

@@user-kr1dt9su3t I hope this helps a little. Thank you for your comment.🍺🍺🍺

@user-oy6jl9dg4f Жыл бұрын

フィギュアの塗装動画出してほしいー😊

@smc-2 Жыл бұрын

1/35のフィギアーは小さくて塗装作業中の動画撮影が至難の業で、私が合格点を出せるレベルでは中々撮影できません。なんとか上手くいかないかと色々試行錯誤中です。申し訳ありません。ちなみに私はフィギアの塗装が一番苦手なのです。いつも作業に入る前は少々憂鬱になってしまいます。そんな私のフィギア塗装のテクニックは、とてつも無い手抜きテクニックなのですが・・・・・・。🍺

@user-oy6jl9dg4f Жыл бұрын

えぇ？！苦手なんですか？！めっちゃリアルでもう、自分の意見ですけども動画に出してもいいくらいリアルですよ！？！笑笑😊

@smc-2 Жыл бұрын

@@user-oy6jl9dg4f 本当に上手な人の、惚れ惚れと見惚れてしまうようなフィギアーの作例を見れば、私など撮るに足りないヘタッピです。フィギアーの塗装は非常に奥深く、一筋縄では行かない難しい世界だと思っています。🍎

@user-oy6jl9dg4f Жыл бұрын

もう、今は難しい世界ですもんね😅 まぁこれからも応援してます😊

@smc-2 Жыл бұрын

@@user-oy6jl9dg4f ありがとう。あまり難しく考えすぎず、楽しむことが一番ですね。コメントありがとう。😄

@igorsevcov4081 Жыл бұрын

🤝👍⚒👏

@smc-2 Жыл бұрын

👍😄🍎

@federicobionda4192 Жыл бұрын

Can you make a figures paint video? Please 😉🙏

@smc-2 Жыл бұрын

1/35 figures are small and difficult to photograph. I'm currently in trial and error. I would like to post it if I can prepare the equipment and take a good video of the figure. Thank you for your comment.🍺

@federicobionda4192 Жыл бұрын

Thanks