German vs US Wire Strippers? Knipex, Klein, Irwin, Kobalt, Craftsman, Ideal, Neiko, Horusdy, Dowell

Рет қаралды 664,651

Күн бұрын

Wire Strippers Tested: Knipex, Irwin, Dromild, Neiko, Klein, Craftsman, Ideal, Irwin, Capri, Kobalt, Dowell, and Mr. Pen. Wire strippers tested for wire stripper knife sharpness, force to cut through aluminum wire, screw cutter precision and sharpness, and wire insulator removal performance. Self-adjusting wire strippers also compared for performance. I always purchase all of the products tested to ensure unbiased reviews. So, thank you for supporting the channel!
➡ Thank you for supporting the channel through memberships:
/ @projectfarm
➡ Thank you very much for supporting the channel through Patreon: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: project-farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
➡ Products Tested In This Video (in no particular order):
Knipex: amzn.to/3L0l9W0
Knipex (Self-Adjusting): amzn.to/3K3mqdW
Irwin: amzn.to/3K18oZX
Irwin (Self-Adjusting): amzn.to/3uUWzQT
Dromild (Self-Adjusting): amzn.to/3rBj6jN
Neiko (Self-Adjusting): amzn.to/3xCbSQc
Horusdy (Self-Adjusting): amzn.to/3McbJqM
Klein: amzn.to/3OklMvL
Ideal: amzn.to/3Es0p74
Capri: amzn.to/3JXZxIu
Dowell: amzn.to/3xE660v
Mr. Pen: amzn.to/380NrkI
Craftsman: (available at Lowes)
Kobalt: (available at Lowes)
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/3Ca0ZVN
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC

Пікірлер: 4 300

@TheBigEvil 2 жыл бұрын

Could you test popular Paracord (parachute cord) brands? Sometimes it's all you got and you got to be able to trust it's load bearing capacity and strength.

@ProjectFarm 2 жыл бұрын

Thank you for the video idea! What specific brands should I test? Any suggestions on tests or how to compare performance? Thanks again!!

@anonymouslydistorted 2 жыл бұрын

I second this idea!

@savage6394 2 жыл бұрын

@@ProjectFarm I like this idea. I just notice a product called Rapid Rope. Maybe you could add that to the test too.

@jeremynguyen2346 2 жыл бұрын

@@ProjectFarm hello

@windrider65 2 жыл бұрын

That's a good idea, a lot of people that day hike or even camping carry Paracord. Some brands are made for survival and some of the inside lines or threads are designed for specific tasks. As far as the wire stripers, if I can spin the striper around the wire they seem to cut the insulation better. Sometimes depending on where you are using them you just don't have the space. Years ago I seen an electrician using a home made one out of an old chisel. He cut a V in the blade and just spun it around the wire. Whatever works best for you is the right tool for you. Take care everyone. From Charlie

@ibnewton8951 2 жыл бұрын

KZfaq’s absolute best consumer reports. I never ever miss them. I am convinced that his tests and reviews are totally unbiased and that he is not ‘bought and paid for.’

@ProjectFarm 2 жыл бұрын

Thanks!

@GraciousKiller 2 жыл бұрын

I agree but by saying all that you've jinxed it now. Let's hope no company can ever afford to sway him

@tallskinnygeek 2 жыл бұрын

If you can't tell that Project Farm is pushing the homemade testing apparatus industry in nearly every video, you aren't paying attention.

@tylersmith293 2 жыл бұрын

Same.

@paulsto6516 2 жыл бұрын

"Consumer Report", now there's a name I haven't heard in 20 years.

@simguns8388 2 жыл бұрын

When using the bolt cutters, the bolt needs to be threaded through from the threaded side of the pliers so when you remove the cut bolt from the pliers, the pliers act like a die over the bolt thread.

@ProjectFarm 2 жыл бұрын

Thank you!

@1kreature 2 жыл бұрын

Yeah I was wondering about that also. The head part is supposed to stay in the cutter after use and has to be unscrewed, and the tip part usually goes ping off in a corner. Supporting the threads in a threaded hole prevents damage to them during the cut. Unscrewing it rolls any flashing back onto tip allowing easy not entry.

@deanrhodenizer938 2 жыл бұрын

Exactly. Removing the screw through the threaded portion of the pliers allows the threads to be "chased" cleaning up any irregularities that may result from the cutting..

@Mack_Dingo 2 жыл бұрын

Knipex got rid of that stupid concept😌

@opiegonebad58 2 жыл бұрын

Yep, you did the bolt cutter test backwards. Put the screw in the right way and it repairs the thread damage when you back it out.

@liljuanito123 Жыл бұрын

So I'm an engineer (mechanical) ... watched many of your videos and your test setups are very well thought out and nicely executed. Thanks for all you do, it's greatly appreciated.

@ProjectFarm Жыл бұрын

Thanks and you are welcome!

@bmssenjoyer 2 ай бұрын

just because U.S. politicians made it easy to slum your way through an affirmative action degree, that doesnt make you an engineer by any stretch

@alexdrockhound9497 8 күн бұрын

@@bmssenjoyer id like to see you learn differential calculus, thermodynamics, or dynamic mechanics. Do you even know what a fourier transform is? If not go pound sand.

@rickwise9910 2 жыл бұрын

I've had the Knipex Multistrip 10, a slightly smaller automatic stripper, for a year or so. I'm a hobbyist, but I use them pretty much daily, usually on 16-28ga, both solid and stranded, and they always perform perfectly.

@ProjectFarm 2 жыл бұрын

Thanks for sharing.

@TheHookUp 2 жыл бұрын

I was under the impression that you actually don't want the wire cutters to cut 100% through the insulator, instead it should be around 95% and then tear the rest so there is no damage to the conductor. On the pull test it looks like the Klein left score marks on the conductor which can cause a weak spot. The Knipex performed how I thought it should work where the last 5% of insulator is torn rather than cut and there aren't any marks on the conductor itself.

@twistedhillbilly6157 2 жыл бұрын

You are correct in a perfect world.. When doing military work many projects require a hot stripper that can't nick the wire... When working with large gauge wire (350 to 750) you are supposed to whittle the insulation NOT cut it radially.. HOWEVER,, very few of us actually do that. I try to cut the ins. just shy, then make a through cut longways and peel/tear it off.. It's a lot more critical with fine stranded wire than it is with solid wire..

@ProjectFarm 2 жыл бұрын

Thanks for the feedback.

@beinghuman3225 2 жыл бұрын

That test was inaccurate cause the stripper was clamped onto wire wrong, your supposed to lay wire in channel then squeeze.

@twistedhillbilly6157 2 жыл бұрын

@@beinghuman3225 Are there printed instructions saying how "YOU'RE" supposed to do it??? Please provide link...

@1pcfred 2 жыл бұрын

Yeah nicking the conductor is a big no no.

@electronicsNmore 2 жыл бұрын

Right up my alley. :-). Superb testing as always! Thank you

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome!

@torbenmayer 2 жыл бұрын

A few words for anyone considering the fully automatic ones: Apart from the Knipex, the fully automatic ones look very, very strange and I wouldn't want to use them. However, we use fully automatic ones at work (actually a different Knipex one, model 12 40 200). These are by far the best I've ever used. So much quicker, very reliable, no damaged wires, very easy to use. And the biggest benefit in my opinion: You can change the blade and plastic bits if they are used up / broken. Blades e.g. are priced at around 12€ for a set of both (cheapest online). For a hobbyist, the manual ones might be a good choice, but for everyone who needs a daily driver the Knipex automatic ones are unbeatable imo, especially since you can swap the wear parts (and to be honest, for that price everyone should just get the automatic ones). And, with the mentioned model (flat blade instead of the V-shaped shown in your video), you can actually strip multiple wires of the same thickness at once. Probably not intended, but possible without any downsides, since the blades dont cut throught the complete isolation. (Just read the info on their website, they are actually designed for flat cables up to 10mm width, so it even is intended). Oh and what I forgot: you can set the length that needs to be stripped by adjusting the plastic piece, so if you need ferrules and need the conductor to be stripped down 10mm or whatever, you'll get perfect results, every single time.

@ProjectFarm 2 жыл бұрын

Thanks for sharing.

@WITY90 2 жыл бұрын

KNIPEX PreciStrip 16 (12 52 195) are the improved version of 12 40 200, they strip even better!

@nwi22 Жыл бұрын

As a German, I have worked with many high-quality products. Knipex also has an excellent reputation here. However, almost every electrician here uses the Weidmüller Stripax. These are the best wire strippers I have ever held in my hands. But they also cost a little more

@ellescer Жыл бұрын

How good are they at stripping the insulation off solid conductors?

@gokblok 10 ай бұрын

I used the cheapo auto strippers in an auto shop where I did a fair number of wiring repairs for about 3 years and they worked great and held up just fine. I would say they're pretty much just for stranded wire though.

@ExcavationNation 2 жыл бұрын

Can't we all agree this guy never disappoints us with his content 👍

@ExcavationNation 2 жыл бұрын

Had to beat the bots 😋

@dfinma 2 жыл бұрын

I agree. He's really excellent.

@ProjectFarm 2 жыл бұрын

Thank you!

@BratislavMetulskie 2 жыл бұрын

disgusting comment

@scottjones7279 2 жыл бұрын

Especially when he is driving the motorhome in the cow pasture

@mtreis86 2 жыл бұрын

A related request for you: compare some soldering irons. See how hot they get, how accurate the temp is, and what the biggest wire they can heat up is, maybe if they can solder plumbing or not. Definately compare butane vs battery powered ones too, not just plugged in. I really like the Pine64 Pinecil. You can buy a cheap soldering iron tester to do the temp accuracy comparison.

@tysonk5347 2 жыл бұрын

Also to add to the list. How long does the tip last ?

@ProjectFarm 2 жыл бұрын

Thank you for the video idea!

@reneantonio91 2 жыл бұрын

THIS !

@ingenierocristian 2 жыл бұрын

Meh, there is a channel called sdg electronics, it makes a ton of videos about soldering irons

@tihspidtherekciltilc5469 2 жыл бұрын

I'd like that test as well as I really want to build my own portable power bank.

@mandc20022 2 жыл бұрын

What I love the most about your videos is, you get straight to the point and dont try to fluff the length of the video, this is the quality content I appreciate.

@ProjectFarm 2 жыл бұрын

Thank you!

@BYOTools 2 жыл бұрын

As always I'm so impressed with your detailed testing and loved some of the up close shots you are getting. Thanks so much and continually impressed with Irwin and how they perform.

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome!

@kukkuud2105 2 жыл бұрын

I have never been let down by a knipex product and i am glad to see them succeed in your tests as well, great job

@ProjectFarm 2 жыл бұрын

Great point!

@HDJess 2 жыл бұрын

Indeed, very high quality products, widely used in aviation maintenance. Most pliers and side-cutters in our mechanic toolboxes are Knipex. As for the rest, wrenches, sockets there's Snap-On.

@dougerrohmer 2 жыл бұрын

I used to be a Knipex fan, but I'm now sold on Irwin. They seem to always be up there with the bestest, but at a third of the price.

@Chris.Rhodes 2 жыл бұрын

@@dougerrohmer i actually love my Milwaukee 6-n-1 strippers. They're the model #48-22-3079 I've had them for a year now, and I have zero signs of dulling, and they haven't let me down yet. And the pliers at the end are great! Best $26 I spent!

@bigsteve6729 2 жыл бұрын

@@dougerrohmer yup

@jamieboothcomedy 2 жыл бұрын

Anybody else find themselves picking a “team” when watching these and hoping they win in the end? Fantastic work as always, project farm!

@ProjectFarm 2 жыл бұрын

Thanks!

@AirmanDan916 2 жыл бұрын

Team Makita, Klein & Kobalt over here

@echo4whiskey 2 жыл бұрын

I'm usually team hoping whichever cheap brand comes in a close 2nd

@maxwell6774 2 жыл бұрын

I always hope the made in USA stuff wins.

@lyrooo326 2 жыл бұрын

I'm almost always on team Dewalt.

@larryschmidt3594 2 жыл бұрын

As an electrician for 42 years I have been using Ideal or Klein my whole career. They are small and lite for tucking into your tool pouch. Was really hoping to see the new Milwaukee stripper in the test.

@ProjectFarm 2 жыл бұрын

Thanks for the suggestion.

@ricker76er Жыл бұрын

I was looking for the Milwaukee too

@MarkTrades__ Жыл бұрын

@@ProjectFarm SEEING THE "KLEIN KURVE" heavy duty wire strippers would have been a nice comparison to the Knipex option here (for maybe round 2, haha)

@paulverstraete9157 Жыл бұрын

i like the ideaal for residential....the milwaukee needlenose shaped shear cutting ones are great for industrial commercial work....wired houses for 15 years and went union 23 years ago....heres to our trade....

@larryschmidt3594 Жыл бұрын

@@paulverstraete9157 retired after 42 yrs. Thumb joints are bone on bone,had my rotator cuff done and carpal tunnel surgery. Battery tools were a Godsend. Take care of yourself out there.

@willmorrison1022 2 жыл бұрын

Every time you do one of these tests that includes Irwin tools, I'm consistently impressed with how well they work. I have several of their items from over the years, but it's always impressive to me to see how well they do, especially for the money. Their bench chisels have been really good for me, over the years, as have all their other tools. Granted, they aren't the high end things, but for the amount I tend to use them, they are more than adequate. And I can usually have lunch with the money I've saved. Honestly, it's nice to see my suspicions confirmed, they do decent tools for a good price. I probably wouldn't use them in pro situation, but then, if I were in that situation, I could most likely afford the best. and would want them. Irwins do just fine for me.

@ProjectFarm 2 жыл бұрын

Thanks for sharing.

@irock2drums 2 жыл бұрын

While he doesn’t actively mention this in his videos, Project Farm has a Patreon where you can help support these videos since he doesn’t use sponsors (rightfully so). I didn’t think I’d ever be the type of person to give support on Patreon until I found Project Farm and realized that he’s the kind of creator that I want to support with my dollars! Thanks for everything you do Project Farm!

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome!

@bansheedearg 2 жыл бұрын

I only patronize two channels, this is one of them. And one big reason is that he doesn't do sponsorships, so it's a fair price for unbiased reviews, without ads and what not.

@aayotechnology 2 жыл бұрын

@@bansheedearg you have to tell us the other!

@bansheedearg 2 жыл бұрын

@@aayotechnology Great Scott, but he's struggling to come up with interesting content, unfortunately. Not easy.

@aayotechnology 2 жыл бұрын

@@bansheedearg that’s one geeky channel but interesting stuff. Thanks for the heads up

@Squat5000 2 жыл бұрын

Those knipex strippers are designed specifically so you make the initial incision at an angle and rock the strippers you start the strip in stead of just pulling straight out. That's why the fit is a little loose. Put it in at about a 30 degree angle and it's money in Super comfortable and let's me do thousands of them a day without fatigue.

@ProjectFarm 2 жыл бұрын

That is great! Thanks for sharing.

@itsunoshiyuga 2 жыл бұрын

i have the same just for Europe. they are incredible. as mentioned - cut at an angle. I have grinded all sharp edges with angle grinder to prevent damage to insulation when using the tip to push in cables into wago in tight spaces. best pliers for electrician. only these one are all you really need. :)

@hanwagu9967 2 жыл бұрын

Knipex: cut at an angle yes, rocking no. They fit a little loose when wire is straight in, because it's a balance between cutting the insulation and damaging the conductor.

@dustinpomeroy8817 2 жыл бұрын

It takes some getting used to ,but I agree once you do it's effortless.

@itsunoshiyuga 2 жыл бұрын

@@hanwagu9967 i my case, the hole is slightly oval so it looks like it was made to cut at angle to cut almost all the way through insulation. then straighten them up and increase the space around the copper for pulling insulation off with reduced risk of damaging the conductor. :) and this is not only for knipex. most of them work like this best :)

@diazgrows9165 2 жыл бұрын

Another great one! Thank you sir. Really appreciate your efforts in sharing such a thoroughly researched comparison on an essential tool category. Keep up the great work!

@ProjectFarm 2 жыл бұрын

Thanks, will do!

@ncooty 2 жыл бұрын

Great video. 2 small points: The metric of most interest to me was one not tested: damage to the conductor. Also would've been interested in crimp quality. (I guess also interested in handle insulation and fulcrum strength.)

@ProjectFarm 2 жыл бұрын

Thanks! Thanks for the feedback.

@alexandrezani Жыл бұрын

Yeah, for me, wire strippers are just for stripping wire. It's nice that they can cut something sometimes, but I tend to switch to my diagonal cutters anyways to avoid messing up the alignment. I would love to see something focused on damage to the conductor and durability. (Will repeatedly pulling off insulation result in the pivot point losening and misaligned jaws)

@jimi272 10 ай бұрын

@@alexandrezaniyeah, and pretty much the only ones that can do that continuously are knipex precistrip and weidmüller stripax automatic strippers… here in Europe, no electrician uses manual strippers. You have to strip without damaging the conductor by law… everyone should have one…

@elivaughan1192 2 жыл бұрын

I really like that Irwin always performs pretty well on these tests. They might not be #1 every time, but they are affordable and good. Thats what most of us want and need. Great video, as always.

@ShotgunRocket 2 жыл бұрын

Really good quality for the money

@moron_with_a_voron 2 жыл бұрын

well in germany knipex is often cheaper than irwin and klein (funfact wich acsually means small in german ) but other stuff is impossible to get or way more expensive

@MAGAMAN 2 жыл бұрын

Irwin buys out good companies, then moves 90% of their production to china. I don't buy Irwin tools for this reason alone. They are a parasite.

@ProjectFarm 2 жыл бұрын

Thanks!

@garycarpenter2932 2 жыл бұрын

@@moron_with_a_voron don't have to pay for the plane/ship ride in germany. i've had/have all in one form of tool or another. love my klien linemans, knipex pliers, and irwin stuff.

@tihspidtherekciltilc5469 2 жыл бұрын

Klein Tools was what I worked towards when I worked as an electrician's apprentice and Klein Tools was what I had 20 years later when I started as a groundman for an electrical distribution and transmission construction company because I wanted to further my education and travel. Again, thanks for the excellent tests.

@ProjectFarm 2 жыл бұрын

Great feedback! Thank you

@charliesullivan4304 2 жыл бұрын

In the summary at the end, Klein doesn't get much of a mention, but it's in first place on both wire stripping tests. Given that this is a test of wire strippers, that ought to count for a little bit more than doing well at secondary tasks that I'd probably choose a different tool for anyway. Ideal, another brand that is focused on products for electricians also did great when you consider what the key functions are, and especially for its low price.

@RealMrNails 2 жыл бұрын

You got a like based on your emanresu

@tihspidtherekciltilc5469 2 жыл бұрын

@@RealMrNails .sknahT

@paulshayter1113 2 жыл бұрын

I've had a few Klein Tools for 50 years and they still work as good today as they did back in the 70s when I bought them working construction.

@craigjessop5071 2 жыл бұрын

I love the side by side views, and the close ups. Great job on the best reviews anywbere.

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome!

@AllisChalmersMN 2 жыл бұрын

I got a self adjusting wire stripper from harbor freight a couple years ago. I had never used that type before. I was amazed at how well it worked and how easy they were to use. Great video as always!

@ProjectFarm 2 жыл бұрын

Thanks! Thanks for sharing.

@firstname7594 2 жыл бұрын

When I started out as an electrician I had Klein tools in my Klein pouch and in my Klein tool bag. They were all great tools a little pricey but well worth the money you pay for. Don't be afraid to buy Klein's well worth it.

@ProjectFarm 2 жыл бұрын

Thank you!

@KreemieNewgatt 2 жыл бұрын

The Klein logo pretty much says it all, it's a guy belted to a power pole. I love my Klein tools, and use my 10-in-1 driver every work day. I'd rate the strippers in this video at the top because to me ease of insulation removal is the most important attribute, followed by a precision build.

@Matt-my7pz 2 жыл бұрын

I love Klein as well and it's pretty much all I role with except the level. And I don't like how deep Klein tool pouches are. I went racketeer. The only thing it's missing is a proper pencil/ 6" bit storage poket

@leftyeh6495 2 жыл бұрын

Klein is getting hit and miss. I still like their screwdrivers and blue handle dikes and linesman's, but ideal strippers last much longer for me. Ideal has some solid stuff, still USA made, and can be much cheaper. Oxidental is the go to for tool bags. I've worked with guys that are still using their bags after 20 years. The $500 price tag is enough to make a guy gag, but it's rare to need a second set. I have about 5 years on rack-a-tiers bags and they're about shot, oxidental is next.

@betz999 2 жыл бұрын

Just stay away from their pull string. Even the 6500' buckets are wound as tight as their mini 250' containers. Shit bunches up and snags way easier than say, a graybar bucket.

@codynate4522 2 жыл бұрын

I'm an electrician, I use those yellow, straight handle Ideal strippers daily and they're by far the best ones I've found yet. I remove the spring but thats just personal choice.

@ProjectFarm 2 жыл бұрын

Thank you for the feedback!

@chadd587 2 жыл бұрын

I second the Ideal brand. Industrial electrician. As a bonus they take up less real estate in the tool belt on calls.

@AgentOffice 2 жыл бұрын

@@chadd587 you might say they're ideal

@rodeoclownobama5796 2 жыл бұрын

mine are 40 years old, they were my dad's and now they are mine, they work the best, I had 2 pair, I left one at someone's home I was working in, you would think they would call and say ,"hey you left your strippers here" you know my service bag has around 700 bucks in tools in it. people are just pathetic now a days

@jonathanhochstetler7136 2 жыл бұрын

I'm just a handyman but I use the ideals too and I love them

@ryanborax7851 2 жыл бұрын

This man always finds an amazing way to test products with incredible consistency and accuracy. Keep up the good work!!

@ProjectFarm 2 жыл бұрын

Thanks, will do!

@rjaustin82 2 жыл бұрын

This is the only channel on youtube that I'm subscribed to with alerts on. So much incredible and informative content. As a tradesman, I appreciate every tool video you do!

@ProjectFarm 2 жыл бұрын

Thanks so much!

@jamescrockett6887 2 жыл бұрын

Great video Todd!! I have been a licensed electrical contractor for 45 years, and in the trade since I was 13 years old. Out of Klein, Greenlee, Ideal, Channellock, Stabilia(for levels), I can honestly say that I have never had a bad/deffective tool in the bunch no matter for what purpose the tool is designed for. I dont have one brand that i stick to, but what fits best for my trade. Sidenote, sometimes Klein and a few others need a break-in period to loosen up(the old 1000 honing compound trick with WD40 and a few minutes of open and close repetions loosens them right up.) I still have my first basic tools which I now just keep in my desk for inside the house work and quick access. I thoroughly enjoy Klein screwdrivers, and they can be re-squared up in seconds with a diamond stone. The biggest threat to my tools, is employees zapping them on hot circuits! Having great quality tools, with good quality brand names, gets the respect from fellow tradesmen, and other trades, besides showing that you spend on quality tools, which hopefully is a carry over to the quality of work standards you adhere to(while it may seem superficial, it is a matter of fact in the trades.) Ergonomics is usually my first priority, then tool platform preference and quality. Of course not everyone feel as I do, it's my two cents of experience which may possibly help others make their tool purchase decisions. Thank You, and Keep up the great, and useful weekly content!

@ProjectFarm 2 жыл бұрын

Thanks, will do! Thanks for sharing.

@dustinpomeroy8817 2 жыл бұрын

Get a can of Fluid Film and spray the joint,you'll never use the other method you mentioned again.

@RadDadisRad 2 жыл бұрын

Greenlee levels come not level. At least the Aluminum green ones. I stick with the Klein as they are made slightly better. I do like No Dog for levels.

@charlestaylor3195 2 жыл бұрын

I agree with you 100%.

@Matt-my7pz 2 жыл бұрын

Nice comment James. I have all Klein as well, been an electrician since 98, tho I must say Klein has a garbage return policy compared to some other brands. I finally have up about 10 years ago on Klein levels and went Stabila.

@Dacraun 2 жыл бұрын

I believe I've said something similar before, but it doesn't hurt to reiterate the fact that your videos are fantastic. Not only is your content informative and useful, but your excellent presentator voice keeps your videos engaging, and your editing flow makes them a really smooth experience. Your videos have helped me make informed purchases in the past, and I always look forward to seeing what you'll cover next.

@ProjectFarm 2 жыл бұрын

Wow, thank you!

@janami-dharmam 2 жыл бұрын

Good things must be repeated often: just like good deeds. You can never show the appreciation for goodness enough. Project farm is simply good.

@erikguzik8204 2 жыл бұрын

I've had my Irwin Strippers for a few years now, absolutely love them -- bonus, got them on sale at a Father's Day special. Great test as always. So much useful info and well done on the testing style.

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome!

@levibates4197 2 жыл бұрын

Thank you! You have changed my opinion on many tools, and you have saved me a ton of money too!

@ProjectFarm 2 жыл бұрын

Thanks! Glad to hear!

@ICECOLDOUTDOORS 2 жыл бұрын

My dad has been an electrician for almost 60 years and still going today, as long as I remember he has always used Klein tools for almost all his hand tools other than his wire strippers. He always used Ideals. And I've always liked the simplicity of them personally.

@FishFind3000 2 жыл бұрын

I have both Klein and ideal strippers and the ideal just feel better to me.

@gavinsauer1608 2 жыл бұрын

My dad was an electrician and ran his electric own company. They all used the Ideal wire strippers and they really liked them. I think everyone liked their small size, simplicity, and that they didn't cause much fatigue in the hand as other types did. I will say they are pretty darn durable as I still have my dad's old pair that is still going strong after I got them 10 years ago.

@ProjectFarm 2 жыл бұрын

Thanks for sharing.

@1pcfred 2 жыл бұрын

Yeah for whatever reason in the USA Ideal strippers are the industry standard. Klein for everything else.

@littlechimpy8468 2 жыл бұрын

As an electrician who has used many many wire strippers I can tell you the ideal are by far my favorite

@ProjectFarm 2 жыл бұрын

Thank you!

@dadfixdit 2 жыл бұрын

Great as always Todd! Thanks for your dedication to completely fair testing.

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome!

@Watchyn_Yarwood 2 жыл бұрын

Another great video! Years of low voltage wiring got me hooked on Craftsman. As soon as they quit cutting or the jaws got loose, I went straight to Sears and got another pair. Lifetime guarantee! That said, I would really like to see snap ring pliers compared. Those things are my pet peeve!

@ProjectFarm 2 жыл бұрын

Thanks! Thanks for the video idea.

@grindelwalk 2 жыл бұрын

I used the self-adjusting Knipex wire stripper while working in a company for a while and when I use the rather affordable wire strippers from the big box retailers at home I can still feel the world of difference in pretty much every aspect...

@ProjectFarm 2 жыл бұрын

Thanks for the feedback.

@one8088 Жыл бұрын

Ok pres of knip

@john-paulsilke893 2 жыл бұрын

I just love this channel. Such a simple concept and yet some of these testing rigs are borderline genius. It never fails to both inform with actual useful information as well entertaining.

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome.

@noahbillingsley8347 2 жыл бұрын

By far my favourite KZfaq channel. Keep up the great work!

@ProjectFarm 2 жыл бұрын

Thanks, will do!

@andrewbarney5503 2 жыл бұрын

Thank you!! Awesome to have a video produced of one I requested!!

@ProjectFarm 2 жыл бұрын

You are welcome! Thanks for requesting this video idea.

@danspencer9499 2 жыл бұрын

We love your work, man! You explain everything completely, but without any time wasted. Much respect!

@ProjectFarm 2 жыл бұрын

I appreciate that!

@mermaidmuncher2708 2 жыл бұрын

I think he uploads his videos at 1.25X speed.

@jameshaulenbeek5931 2 жыл бұрын

I used standard wire strippers like the ones in the video for years. After having them fail for various reasons, I switched to the heavy duty klein kurve - they're still working just as well as when I bought them. Far worth the extra money. They don't flex and the riveted pivot doesn't loosen. Also, while it's an extra tool to carry, using a dedicated wire cutter is far better. I've found many built in cutters on wire strippers to not hold up to regular use as well as a dedicated cutter.

@ProjectFarm 2 жыл бұрын

Thanks for the feedback.

@opiegonebad58 2 жыл бұрын

Spent 30 years as a licensed electrician and used either Ideal or Klein strippers all those years. They do the job, last a long time (as long as you don't blow up the cutting edge!) and they are economical. I will say, if any "electrician" showed up at a job site with automatic strippers they would most likely be laughed off the job.

@jameshaulenbeek5931 2 жыл бұрын

@@opiegonebad58 I'm referring to the heavy duty ones klein came out with a number of years ago - they're not as small and compact, but they're ridiculously durable. The riveted joint holds up very well.

@ProjectFarm 2 жыл бұрын

Thanks for sharing.

@Gael_AG Жыл бұрын

The best review so far I saw on KZfaq ! Congrats for this heavy work

@ProjectFarm Жыл бұрын

Thanks!

@18bagabooo 2 жыл бұрын

Great video, as always! Watching Your videos on Sunday evening became a routine for me nowadays!

@ProjectFarm 2 жыл бұрын

Thanks! Thanks for sharing.

@danjordan1979 2 жыл бұрын

I was surprised by how bad the Knipex looked our of the box, they looked like they've been used and abused already! But I knew they'd do the job very well, and they did! Another excellent review video, thank you so much! 👍

@berndrosgen1713 2 жыл бұрын

That is what I have also thought.

@ProjectFarm 2 жыл бұрын

Thanks for the feedback.

@dexterx55 2 жыл бұрын

i bought a lot of knipex tools in the past here in germany and i NEVER had a tool looking like that. Probably has to do with shipping (maybe not enough oil to prevent surface rust).

@supergirandpig 2 жыл бұрын

Mine also looked like that out the box

@Savagetechie 2 жыл бұрын

I think it's the first knipex tool made specifically for the American market, certainly the first to be released in America before Europe; with that in mind you'd expect it to be well prepped for transport. Can't say I've ever had a knipex tool arrive looking like that.

@iowa_don 2 жыл бұрын

13:30 - Looks to me like several made nicks in the wire. I'd prefer they cut a bit less through the insulation (more force to remove it) and leave the wire with no nicks, especially on solid wire.

@ProjectFarm 2 жыл бұрын

Thanks for the feedback.

@MattsAwesomeStuff 2 жыл бұрын

Yeah, no one cares what condition the insulation is... but it's a huge deal if you knick the wire, it makes it far, far, far more likely to rip of fold and become brittle there. Stranded wire will have pieces break off, solid wire will shatter, makes a fire hazard.

@Whataguy2322 2 жыл бұрын

This was awesome to watch as I am graduating a tech school for electrical and have a few of these wire strippers

@ProjectFarm 2 жыл бұрын

Thanks! Congratulations on you educational achievement!

@SMKreitzer1968 2 жыл бұрын

Thanks Todd awesome roundup!

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome!

@ludatrades 2 жыл бұрын

Great video thanks for the tests. I'm sold on the Klein's, a fair price and good at stripping stranded copper with ease. I used to make wire harnesses and found that the motion of stripping a wire with least resistance involves about a 45 degree rotation of the wrist from start to finish. Pulling straight has much more resistance, by rotating the wrist correctly in the follow through the insulation comes off effortlessly like butter.

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome!

@savage6394 2 жыл бұрын

Dang! Milwaukee was a No-show for this showdown. I was hoping to see how they stacked up. Milwaukee makes a couple different styles of strippers. Great video as always Todd!

@ProjectFarm 2 жыл бұрын

Thanks!

@leeka40 2 жыл бұрын

Same here, neither Milwaukee or Quinn in the test mix.

@jaredm450 2 жыл бұрын

Channellock too. They offer two very different styles.

@nmatthew7469 2 жыл бұрын

Only their power tools are good.

@edgarpryor3233 2 жыл бұрын

Just bought some Milwaukee strippers a few weeks ago, I would expect them to give Knipex a run for the top spot. Definitely built stronger than most of the brands tested.

@solarsynapse 2 жыл бұрын

Great testing as usual! I have been using the same Ideal strippers for 40 years. You can move up a size to strip stranded wire with solid strippers. Strip 14Ga stranded with a 12Ga solid stripper. If you put a nut on the screw before cutting, the nut will chase the threads when removed.

@ProjectFarm 2 жыл бұрын

Thanks! Thanks for the feedback.

@martyb3783 2 жыл бұрын

Another well made and informative video. Thanks again. Great job!

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome!

@Sainte305 2 жыл бұрын

Nice test! I'm in HVAC Building Automation and have been using the Klein and the Irwin for years now. I have two sets of the Klein though as they offer wire cutters that also do very low gauge wire that I need for some applications. Both brands have held up extremely well and when the Klein start to wear I just go to the store and get a new one for free, which I have only needed to do once in 10 years. :)

@ProjectFarm 2 жыл бұрын

Thanks for sharing.

@dustinpomeroy8817 2 жыл бұрын

I do HVAC also, the Knipex will cut through anything,and they do it fast.Romex,MC cable,they don't care.The end of the pliers knock out knockouts with ease ,they also grab a Romex nut in a way that makes them easy to get on and off.

@Sainte305 2 жыл бұрын

@@dustinpomeroy8817 Knipex makes some great stuff. They're kinda underrated in my field too, which is crazy for how good their stuff is. Same with Wiha, I have a lot of their stuff as well and they're great tools.

@dustinpomeroy8817 2 жыл бұрын

@@Sainte305 I just bought Wera color coated nut drivers, everybody has Malcos it's hard saying if the Weras are any better cuz everybody's shit is wore out.They all are impressed with them tho as am I

@dustinpomeroy8817 2 жыл бұрын

@videodistro 2 жыл бұрын

Didn't know the knipex autostrippers had the "V" shaped cutters. Makes great sense. I've not been as happy with the creepy sutostrippers I have. They work okay, not aren't nearly as nice as those. I think im.ready for an upgrade.

@ProjectFarm 2 жыл бұрын

Thanks for sharing.

@KreemieNewgatt 2 жыл бұрын

They weren't tested, but try Klein Katapult strippers (about $30) I love mine. I also have Wysond auto-strippers, they're junk (as least compared to Klein)

@yourpro3653 2 жыл бұрын

Hands down, you have THE BEST KZfaq channel!! I always enjoy your videos and your approach.

@ProjectFarm 2 жыл бұрын

Thanks so much!

@mc2whls 2 жыл бұрын

Yet again, another great test of tools. Thank you for helping us choose the proper tool, for the right price.

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome!

@FishFind3000 2 жыл бұрын

One of the tips I learned from an electrical is when stripping wire you turn the strippers on a angle and make your cut. When you twist the strippers it helps pull the insulation off a bit and also aids in cutting that insulation better.

@ProjectFarm 2 жыл бұрын

Thanks for sharing.

@1pcfred 2 жыл бұрын

Yeah there's a bit of technique involved in stripping. What you're really supposed to do is nick the insulation with the blades then pull it off with the pliers. That's what the pliers are there for. But I know no one does that. Those pliers really aren't good for anything else. So that's why they're there.

@nmatthew7469 2 жыл бұрын

Learned that as an apprentice as well. I'll go with Klein

@TheHumanFlag 2 жыл бұрын

Great testing! Love the new style tests for testing wire stripper insulation tear weight! I was wondering how you would quantify that. The close up on solid strand fit tightness was a great subjective test for it too. I appreciate that you don’t weigh any tests more than others but I think it makes sense for wires strippers. To me their plier strength isn’t as important since I would just use pliers for grabbing. I would have said the Ideal strippers are the best value. Especially considering being made in the USA

@ProjectFarm 2 жыл бұрын

Thanks! Thanks for the feedback.

@rty3318 Жыл бұрын

I love the efficiency of your videos!

@ProjectFarm Жыл бұрын

Thanks so much!

@rogergonzalez9295 2 жыл бұрын

You're content is always on point Sir 🔥🔥, congrats on you're following you have made on KZfaq.

@ProjectFarm 2 жыл бұрын

Thanks!

@volvo09 2 жыл бұрын

Great testing! Nothing beats a nice pair of strippers when doing repetitive connections. The pull effort test was perfect! Agree with your take on the automatic strippers, the knipex are the only ones I've use. The others are not what I've call a "professional" design. The others have too high of a possibility of damaging the conductor.

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome!

@Shocker99 2 жыл бұрын

The Knipex and similar designs by PressMaster are best when stripping individual wires in my opinion. The other automatic strippers are best for taking off the protective layer of a multi-connector cable. The Knipex and similar designs aren't strong enough to take off the outer protective layer. The other automatic stripper do a worst job because they're not a precise. In my opinion of course. :)

@SomeGuysGaming 2 жыл бұрын

I remember suggesting this a couple months ago. Amazing tests as always! As an electrician I appreciate the work you put into this video.

@ProjectFarm 2 жыл бұрын

Thank you!

@hectorramirez4464 2 жыл бұрын

Honestly brother, I wanted to say thank you for the video. I was one that asked for this video and you delivered magnificently. Before this video I purchased a pair of automatic strippers from Irwin. I absolutely love the Irwin brand, however this video made me want to try the Knipex. Great video, please keep up the great work. Take care.

@ProjectFarm 2 жыл бұрын

Thanks, will do! Thanks for recommending this video test!

@michaelmartin2276 9 ай бұрын

You make the most through test and easy to understand. Thank you again for your efforts !

@ProjectFarm 9 ай бұрын

You are welcome!

@LzysGraphics 2 жыл бұрын

A little sad the Milwaukee Combo Strippers aren’t here, would’ve been great to see how they compare to the more expensive strippers

@ProjectFarm 2 жыл бұрын

Sorry about that

@mayerkatz2836 2 жыл бұрын

I would love to see them against Kline

@gonzomalan 2 жыл бұрын

@@ProjectFarm maybe a good reason to re-test and include the Klein Kurve strippers, maybe even re-cut the bolts threading them in the correct way? there's gotta be a few more models of strippers you can add

@davep400 2 жыл бұрын

I'd use both the wiha and channellock wire strippers and was hoping they would make the test.

@nmatthew7469 2 жыл бұрын

Milwaukee makes great power tools, hand tools average

@stephenrickstrew7237 2 жыл бұрын

Thanks P/F …. this is a tool that’s in my price range even the Knipex … still recovering from the battery polesaw…. I hope you continue the battery powered outdoor power equipment testing …. They seem like a dual use item as some have inverters that are good for portable power …

@ProjectFarm 2 жыл бұрын

Great point! Yes, I'm still recovering from the pole saw cost too. lol

@stephenrickstrew7237 2 жыл бұрын

@@ProjectFarm that’s right you buy a bunch at once ….I got the SKIL 40 volt on sale at Lowe’s .. but only after intense research and consideration

@falc302 Жыл бұрын

Great video! Thanks project farm!

@ProjectFarm Жыл бұрын

Thanks and you are welcome!

@TERRORoftheLORD 2 жыл бұрын

Awhile back I asked if you could add ounces when weighing tools . . . Thank you for adding that!

@ProjectFarm 2 жыл бұрын

You are welcome!

@maybehuman4 2 жыл бұрын

I'm a fan of Irwin tools, but the Craftsman keeps impressing me. The Buck for value is great. Thanks for setting up these tests.

@ProjectFarm 2 жыл бұрын

Glad you like them!

@cbishopwright 2 жыл бұрын

Irwin tools are owned by Stanley Black and Decker, so is Craftsman. It would surprise me if the wire strippers from both companies are probably the same product, just rebranded.

@Chrazzari 2 жыл бұрын

Really appreciate the metric conversions. Know it may not always feel natural if you use another system day to day but it feels the same both ways. Also when you talk about kg, is that kilograms of force. Like approx 10N for grip strength and pulling off wire insulation or am I missing something?

@jameshite4820 2 жыл бұрын

As always a great comprehensive video!

@ProjectFarm 2 жыл бұрын

Thanks!

@gullenator1 2 жыл бұрын

Testing of the force required to remove the insulation was brilliant. This channel is my go to whenever I need to buy new tools. Last night I needed new paddle bits and my first thought was I wonder if project farm has tested these. I can guarantee that these companies haven’t done such a detailed assessment of their competitors.

@ProjectFarm 2 жыл бұрын

Thanks for the feedback.

@hiredgoon4269 2 жыл бұрын

Thanks for this video, it confirms my belief that Klein Tools and Ideal make the best strippers haha! Honestly, I'm surprised that the Ideals wasn't really mentioned at the end. For only $15, they require very little force, produce clean and reliable strips, and barely scrape the conductor. In many industries, wire strips are held to IPC-620 specifications, which are strict as to how much damage the conductor takes during stripping operations. Then again, those industries typically require the full-cycle automatic strippers similar to the Horusdy, but with grooves for each wire size.

@ProjectFarm 2 жыл бұрын

You are welcome!

@Original_Old_Farmer 2 жыл бұрын

When I strip wires with a traditional stripper, I include a quarter turn to help cut the insulation. I wish you would have included the Harbor Freight strippers, they have several versions. Their high-end do a great job of stripping. So, when appropriate, I would like to see more HF tools in the testing. On some of the testing you do, longevity should be included. Since I'm leaving an epistle how about oil filters, first lawn equipment then automobiles, trucks, and farm equipment? What I do is to see if the tool from a company will do the job and worth the price point. I like that you do lab testing. Good job.

@ProjectFarm 2 жыл бұрын

Thanks! Thanks for the suggestions.

@denisrhodes54 2 жыл бұрын

the equivalent filters of briggs 491056s would be a great place to start.

@user-rl7qh9qt7e 2 жыл бұрын

Great work, but you've made my life more difficult... now I have two sites I have to visit before I buy anything, Consumer Reports and you! I love the detail, and the effort you put into controlling for the variables on all your tests. I also appreciate the different kinds of tests you perform for each tool. I actually have a use for maybe 10% of the products you test, but this is one of my favorite channels!

@ProjectFarm 2 жыл бұрын

Thanks so much!

@gregkiely4839 2 жыл бұрын

Thanks - excellent set up and testing procedure.

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome!

@lonewanderer3603 2 жыл бұрын

It's great to finally hear the words "Made in USA."

@ProjectFarm 2 жыл бұрын

Yes, thank you!

@cablenowadays6586 Жыл бұрын

Im a HVAC tech and i use the klein and like them. I’ve had the same strippers for about 3 years now and use them daily. They probably stripped and cut over 50,000 wires. Id like to use the knipex but the dealers we work with only sell klein tools or milwaukee.

@ProjectFarm Жыл бұрын

Thanks for sharing.

@njmikeche5575 Жыл бұрын

Klien has a couple of models of "multi-tool" strippers that attempt to replace lineman pliers and cable cutters as well, just like the Knipex. I haven't tried them, but I would expect Klien to approximately match Knipex quality. So far I haven't found these to have any deficiency compared to carrying all three tools. My lineman pliers and cable cutters are getting rusty now, I'll have to go and rub some 3-in-1 oil on them before they get ruined.

@AJMoruzzi Жыл бұрын

I do hvac-r aswell, and just ordered the Irwin's, they're similar to the ones in this vid, but have a spring on it. Mine need to have crimpers

@BBryant66 2 жыл бұрын

I am a furniture woodworker and love your videos for other things I dabble in, but would love to see you test fine woodworking tools. Chisels are one of the first to come to mind. Sharpness out the box, ability to hold an edge, "travel" when making a cut, cleanliness of the cut going different directions on wood grain. I hope that's enough of an idea.

@ProjectFarm 2 жыл бұрын

Thanks for the video idea.

@fmtvworld75 Жыл бұрын

More great work. You are doing us all such a great service with this work! I would love to see a video on CRIMPERS! Thanks for sharing the knowledge!

@ProjectFarm Жыл бұрын

Thanks and you are welcome! Thanks for the suggestion.

@Scoutmann1975 2 жыл бұрын

Todd! You are the best!

@ProjectFarm 2 жыл бұрын

Thank you for the positive comment!!

@BraxtonMeyer 2 жыл бұрын

It's amazing how knipex consistently just makes far and away the best tools

@ProjectFarm 2 жыл бұрын

Great point! They seem to hold themselves to a very high standard of quality and performance!

@stevenbelow2502 2 жыл бұрын

And far and away the most expensive. At least you get what you pay for in terms of them being the best. Best value is subjective. For a professional the extra money is probably worth it over the life of the tool.

@ThePewski 2 жыл бұрын

I would never use the Knipex, too heavy and expensive. I do have a few Klien and Ideal strippers. Including the Klien he was using here. My go to are the Klein strippers but not the one shown. Still have the first strippers I got over 20 years ago, Klien.

@1pcfred 2 жыл бұрын

Knipex consistently just makes the most expensive tools.

@rfehr613 2 жыл бұрын

I have those exact Irwins and use them frequently. They're great. I tend to lean towards Klein for a lot of electrical tools, but I'm definitely happy with these Irwin strippers.

@ProjectFarm 2 жыл бұрын

Thanks for sharing! Glad to hear!

@darkenblade986 2 жыл бұрын

didnt notice the word "wire" in the title and got really excited about the content change LOL. Thx for the great vids.

@yewtreefire 2 жыл бұрын

It would be interesting to do multiple tests on the same brands of tools to see the quality control like 5 craftsman and five different Irwin etc.. I'll bet that the more expensive brands would be much more consistent.

@ProjectFarm 2 жыл бұрын

Thanks for the suggestion.

@SparxI0 2 жыл бұрын

I think you get a pretty good idea of the quality control from the close up shots he provides, showing the grind quality of the cutting edges and such. While that would make test results a bit more accurate, it would cost so much more and decrease the amount of videos he could produce if he needed to repeat the tests 5 times. Overall probably not worth it

@yewtreefire 2 жыл бұрын

@@SparxI0 I understand that it would be too expensive and time consuming for every video but for a special video of a common tool say pliers it would be interesting too me. Also with the close ups you only see one example of the tool and not multiple. Grinds on cheaper tools especially varies from tool to tool sometimes you get one that's almost perfect and others almost unusable.

@Leif_YT 2 жыл бұрын

I'm a big fan of the Japanese Engineer ones. Especially for very thin wires (up to AWG 34) there isn't much competition to the Engineer PA-14 model.

@ProjectFarm 2 жыл бұрын

Thanks for sharing.

@Savagetechie 2 жыл бұрын

Iwiss provide the competition although tbh between the iwiss and the engineer its basically a case of picking which handle you prefer.

@Leif_YT 2 жыл бұрын

@@Savagetechie I'm using some Iwiss tools for crimping, they're indeed really nice too. When i searched for a wire stripper for thin wires (AWG 28-34) there wasn't so much competition so maybe that would be a good topic for another video / comparison. The German brand Jokari seems to have one as well, but the Design made me a bit sceptical. Never tried it though.

@jerrykearns6344 2 жыл бұрын

I have XCELITE SAS3210 (made in Sweden) with the PTFE cutter cartridge that goes down to AWG 28. Expensive, but has stripped thousands of small gauge PTFE insulated wires really well.

@miscprojects9662 2 жыл бұрын

You are the go to guy for all my pre purchase research.

@ProjectFarm 2 жыл бұрын

Thanks for sharing.

@codyliles6240 Жыл бұрын

Yessssss ive waited for this test for forever greatt reviewss

@ProjectFarm Жыл бұрын

Thanks!

@MeepMeep88 2 жыл бұрын

In the Home Gym fitness community, people use snap ring pliers to disassemble their olympic bars to maintain them. But some of them are not heavy duty enough and some claim they are heavy duty but still bend and stuff at the tip. Could you think up a few tests for those please? 😊

@ProjectFarm 2 жыл бұрын

Thanks for the suggestion.

@KennyRedSocks 2 жыл бұрын

Great video as always, Todd. A couple recommendations: I'd love to see you compare the forged Klein wire strippers using the same testing format. The only reason that I personally chose the stamped version was because they were offered with 1000V insulated handles. You should also test the lateral strength of the pliers portion. You could clamp portions of wire with differing hardness in the jaws with a set gripping strength and see if they can be bent to a 90 degree angle. One of my only complaints about the stamped Kleins is that they deflect and bow if you try to use them on a wire coat hanger. Please put the metric and imperial measurements on screen in written format. It was difficult to look at one value while you said another one. I felt giving overall ratings partially based on insulation cutter sharpness was unfair given that (as far as I know) they're only used for stripping wire; as can be seen in the case of the Kleins, with only average cutter sharpness, they performed the best in regards to the force required to remove the insulation. The same goes for wire fitment; all that matters to the user is the ease of use and final result, although, the fitment plays a more direct role in stripping functionality. A better choice in ranking category would have been on the damage to the conductor and the cleanliness/integrity of the insulation.

@goldfishn3545 2 жыл бұрын

Wire coat hanger? R U Kidding me? This test was for electrical wire strippers, not universal cutting tools. They are designed to cut copper and aluminum. Mr PF, I apologize to you on behalf of this knuckle-head. Please continue to provide this wonderful service you provide us all. Thanks!

@ProjectFarm 2 жыл бұрын

Thanks! Thanks for the suggestions.

@KennyRedSocks 2 жыл бұрын

@@goldfishn3545 I can see reading is not among your skill set.

@davef.2329 Жыл бұрын

Great, practical (and ingenuitive!) tests. Thanks.

@ProjectFarm Жыл бұрын

You are welcome!

@thedevildick1 2 жыл бұрын

Such a great video. Thanks Todd.

@ProjectFarm 2 жыл бұрын

Thanks and you are welcome!

@davidp2888 2 жыл бұрын

When I was younger, Craftsman was the "best" brand for tools. I'm really glad you put them to the test.

@ProjectFarm 2 жыл бұрын

Hi David, Thank you! I've owned a lot of made in USA Craftsman tools in the past and they are indeed a great product for the price. Thanks again!

@1pcfred 2 жыл бұрын

Craftsman was never the best. Craftsman was just easy to get, relatively inexpensive and had an easy to use and abuse warranty. Craftsman was just a Sears house brand. They didn't actually make any tools. They had multiple manufacturers make tools for them. So the quality was all over the map. Usually it was decent though.

@bobd. 2 жыл бұрын

When stripping insulation ideally you wouldn't want to nick the conductor. You didn't comment on if that occurred with any of the brands unless I missed it.

@boomertsfx1 2 жыл бұрын

You missed it

@1pcfred 2 жыл бұрын

When stripping insulation ideally you use Ideal strippers.

@bobd. 2 жыл бұрын

@@1pcfred You funny.

@chrisg758 2 жыл бұрын

Love the videos, and so impressed with how many comments you manage to reply to. Couple suggestions for things I’ve either been burned on or unable to find comprehensive independent reviews for. Basic multimeters, and decibel meters. Also, really interested to see what kind of test devices you would engineer for sound and electricity. Cheers and thanks!

@ProjectFarm 2 жыл бұрын

Thanks! Thanks for the video idea.

@MrV1NC3N7V3G4 2 жыл бұрын

When cutting bolts, I was taught to thread the nut on first and back it off afterwards to clean up the threads.

@ProjectFarm 2 жыл бұрын

Thanks for the feedback.

@tsidebottom101010 2 жыл бұрын

One trick my father taught me when cutting bolts is to put a nut on the bolt prior to cutting it. That way you can rethread the bolt by taking the nut back off the bolt.

@beinghuman3225 2 жыл бұрын

Threaded hole on stripper is the nut.

@ProjectFarm 2 жыл бұрын

Thanks for the feedback.

@blahorgaslisk7763 2 жыл бұрын

With most wire strippers you are supposed to thread the bolt in so that you unthread the bolt after cutting it. Effectively the same thing as threading a nut on first. Apparently the Knipex doesn't have these threads which makes me wonder just how it managed to cut the bolt that cleanly.

@infin1ty850 2 жыл бұрын

I think Thwain, Japan, central Europe, and the USA are the only tool manufactures I trust at point. Almost everything coming out of China seems to be just quality enough to sell, but not last.

@cjay2 2 жыл бұрын

Plus your money doesn't go to the Chinese Communist Party (CCP).

@infin1ty850 2 жыл бұрын

@@cjay2 that's what I was saying in a bunch of words. I don't want my money going to China.

@stewartxp2400 2 жыл бұрын

You forgot Germany, but I know what you mean. Taiwan is usually great and in no way to be confused with Chinese quality.

@nicogarbella 2 жыл бұрын

@StewartXP I think u mean Thwain isn’t to be confused with China...

@infin1ty850 2 жыл бұрын

@@stewartxp2400 I don't understand how the last part of your comment is in any way relevant. I said I don't buy things made in China and mentioned I will buy things from Thiwan. Are you just repeating what I said to try and get more exposer?

@jconlon78 2 жыл бұрын

A rolling tool bag test would be great! I find your channel very informative and it really helps me spend my hard earned wisely. Keep up the good work.

@ProjectFarm 2 жыл бұрын

Thanks for the video idea. Thanks, will do!

@jimbrewer2893 2 жыл бұрын

Great comparison. As to the bolt cutting, I was taught to thread a nut on before the cut. Removing the nut after the cut will usually clean up the cut threads.

@ProjectFarm 2 жыл бұрын

Thanks! Thanks for sharing.