Get image from Brother Scan'nCut to Bernina Software for digitizing

No video

Get image from Brother Scan'nCut to Bernina Software for digitizing

Рет қаралды 609

Жыл бұрын

If you want to add embroidery to your Brother Scan'nCut projects, or the only scanner you have is the Brother Scan'nCut, then it is useful to know how to get images from the Brother Software to your Bernina Designer Plus software. I show you how and how to ensure the sizing is correct.
To join my free community, or find more tutorials, visit my website here. carolundy.podia.com/

Пікірлер: 19

@geljoseph9609 Жыл бұрын

Thanks Carol another brilliant easy to follow tutorial

@CarolUndy Жыл бұрын

You’re welcome 😊

@lindadittrich151 3 ай бұрын

Thank you, thank you!!!! I had actually written you today about getting the fcm file from brother cutnscan into my V8 software! I'm going to practice on the cat tomorrow! Thank you again!!!

@CarolUndy 3 ай бұрын

Glad you found the video, I have been a bit busy but was going to answer your email and let you know about it. Won't have to now. Have fun.

@carolinekalokerinos9352 Жыл бұрын

Thank you Carol for explaining that. It was a helpful tutorial. Especially on the applique part.

@CarolUndy Жыл бұрын

So glad!

@ladonnaschwobel6575 Жыл бұрын

Thank you so much! I have been trying to figure this out for quite a while. Thanks for including info about size as that is important with recreating my paper pattern. I’m off to work on this. I really appreciate your help!

@CarolUndy Жыл бұрын

Glad I could help!

@EitherOrr1 Жыл бұрын

This is awesome Carol! Thank you very much!

@CarolUndy Жыл бұрын

Glad you like it!

@karenkurdziel4069 17 күн бұрын

Thank you so much for addressing this issue. Min scan-n-cut 325 exports *.jpg when I scan to usb-I’m trying to fussy cut fabric and create and appliqué embroidery file to make stitching the cut object (backed with heat-n-bond lite) simple..thus I need a precise sized placement, tack down and outline applique stitch outs--I’ve been having problems using mysewnet as it sizes to the hoop size or rectangle-which is based on the “box” surrounding the object and not always precise. Resizing/ rescaling in my sewnet is based on the “box” surrounding the object--work properly only for symmetric objects. I’m getting the new 990; therefore considering getting Designer Plus v9 (although I have a Mac with M1 chip limiting virtual machine options)-I will do it if it can do the thinks I do in mySewNet, but no dealer knows enough to help me decide. I can always make an SVG in AI. Your demo shows potential for my fussy cut issue-I’ll start a 30d trial once I understand how to use it better-Thanks

@CarolUndy 17 күн бұрын

The Bernina software creates placement and or cutting lines on the line you digitize, and centers the cover stitch (e.g. Satin, or Blanket) over these lines by default. There are options to offset any of these lines, You can then use the placement line or the cutting line as a basis for creating your cutting files. In fact you can export SVG files of an applique with just a few clicks of your mouse. See this video kzfaq.info/get/bejne/hpijm7aC08i-nac.html So you can work both ways. If you were using your Scan'n'cut file, you would use the cut line to create the applique. As for measuring, the size of a design is measured by width and height. You can also check the size of individual objects. Resizing objects can be done proportionally by dragging corner handles, or by entering a new measurement in the transform tool box. You can also resize by a percentage of the original. To resize just the width, or just the height you can drag the side selection handles or unlock proportional scaling in the transform tool box and alter the width and height independantly. There is also a measuring tool that you can use to measure between any two points.

@karenkurdziel4069 16 күн бұрын

Thanks for the info..the problem I’m having can likely be fixed by the offset-I had a butterfly with antennas and b/c the resize is done by x and y only, the antenna placement was shifting on the round head (only object lines symmetric across the x or y planes get adjusted correctly-not a problem for larger objects

@CarolUndy 16 күн бұрын

That sounds like a really weird way of resizing. When you resize in Bernina, you select all the objects you want to resize and then use one of the methods I previously discussed. All the objects then resize together keeping their relative positions.

@carolinekalokerinos9352 Жыл бұрын

Hi Carol,Are you going to have a PDF lesson on it. If you do I will buy it if you do. Did like this one. Than you

@CarolUndy Жыл бұрын

Hi Caroline, If you own a Brother Scan'nCut machine, the cat cosy pattern is in the Canvas Workspace software you use with that machine. There is an icon at the top of the left hand tool bar that opens a dialog with projects and patterns to use with the machine. This project comes with a downloadable PDF of instructions. It would be subject to copyright, so I cannot do a lesson using that pattern. However, if I get time, I will try to do a cup cozy lesson hopefully with how to design animal shaped ones. I hope that is what you meant with your question. Cheers Carol

@carolinekalokerinos9352 Жыл бұрын

@@CarolUndy Hi Carol,Thank you for the reply back.I would like a lesson on as I do have a Brother Scanncut machine. Thank you Regards Caroline