Get Smarter Storage with These Easy-to-Build DIY Hanging Garage Shelves with Extra Storage Behind!

Рет қаралды 519,043

3 жыл бұрын

My KZfaq Channel is all about projects that begin in my garage. Truth be told, my garage is a mess because of all of my interests and projects. This video is the first on a playlist called Scott's Garage Makeover where I put my DIY skills to practical use in coming up with more storage space in this relatively small garage. The shelves hang from the rafters in the attic using 1/2" threaded rods that are 8' in length. These shelves are also designed to leave a 4' x 8' space behind them to allow the storage of larger items like plywood. They hang next to but do now interfere with the garage door or it's rails.
1/14/22 It has been about a year since I posted this video. Just so you know, the garage door repairmen who have seen this video and commented don't like this sort of thing. For me the function of these shelves has been great. If you have to get your spring replaced, however, from a garage door repairmen, they may charge you more because of the shelves being in their way. If I have to get my garage spring replaced I will simply take down the shelves which is no big deal. The other thing I was thinking of doing was drilling new holes and moving it a foot further away from the garage door.
amzn.to/3cHPBGa = 24 volt Kobalt circular saw
amzn.to/36FanCE = Gorilla wood glue
amzn.to/3cDdJcW = Central Pneumatic 18 Gauge 2-in-1 nailer/stapler
www.valspar.com/en/products/e... = cabinet paint

Пікірлер: 372

@MaximuMechanical 2 жыл бұрын

I got all my material at lowes, cuts to footage of home depot lumber department😂😂😂

@Oh6Torch 2 жыл бұрын

Your shelf makes me want to build a rolling shelf that exposes another shelf behind it. Thanks for the inspiration!!!

@williamfletcher3084 2 жыл бұрын

Love the idea, but I'm a professional garage door repairman, and I would implore that if you do any further customization near your door, or if anyone else decides to build this, please keep at least 1 foot clear by the front of the door, and including the walls on the sides. If your spring ever breaks, we need to be able to access access bearing plates on the top corners of the tracks at the front. Also we need space to be able to get the springs off of the pipe. If that area is too badly blocked, it is likely you could end up paying for more parts and labor, as we may need to cut parts out, or disassemble quite a bit more to get to certain parts. In general, please keep the spring system clear, and give us about 1 foot of clearance all around the door and it's moving parts

@ScottsGarage17 2 жыл бұрын

I appreciate your constructive criticism. If I do it over I will allow the clearance.

@charlesprice4276 2 жыл бұрын

@@ScottsGarage17 fellow garage repair guy and if I were to walk in this garage and see this I would honestly be pissed at this setup being here.

@randomeverything3023 2 жыл бұрын

@@charlesprice4276 I like this, and am going to do this. When I do need my garage door serviced (hopefully not for some time as its only 4 years old) I would just remove it before the repair person comes. It looks way to useful the for the 99.9% of the time it is not in the way.

@nathanlarson7408 2 жыл бұрын

Yes! I was going to make same comment

@ronb6544 2 жыл бұрын

Not like he can't unbolt it and move it out of the way or anything. SMH.

@timhanson2080 2 жыл бұрын

It's your garage do anything you like. Too many people bitching for no reason. If you buy a good garage door and maintain it you really don't need anyone to fix it.

@mrdavebach 2 жыл бұрын

Hey it's KZfaq. The place I come to all the time to learn or get ideas on how to do something, how not to do something, and a whole lot in between. Sometimes it's a combination of the three. I applaud your efforts and your contributions.

@ScottsGarage17 2 жыл бұрын

Thanks. I appreciate your positive input. I have gotten some negative feedback from garage door repairmen who say that it is too close the the spring. If you decide to do this you may want to leave at least 12" from the outside wall.

@oldb-1kenobi 2 жыл бұрын

Loved the extra space you created behind the cabinet for hard to store panels and the space under it for your floor Jack's was great, even the long jack handle tucks away neatly between the rods. Very nice and well thought out build.

@TzUuup 2 жыл бұрын

Come on let's be real. That was kind of an unnecessary build. I'm no pro dryer but it looked like he lost shelving space on this build. What did he really accomplish? The shelf he had there was a good fit, it just looked like he needed to reorganize it

@brendawhite3156 2 жыл бұрын

Love this! Very clever space management. I especially appreciate the show-n-tell in the attic to secure the shelves with the self-made stud.

@shaneella8965 Жыл бұрын

I made floating shelves in my garage also, different style because my roof is flat and I made a house rule "nothing on the floor". If it doesn't fit on the shelves something has to go. I really keeps the garage clean and the rodent out because there is nowhere to hide. Nice video. I like the idea of the space behind for plywood extras.

@TheMindverse 2 жыл бұрын

Great idea. Look at this way regarding the garage repair door complaints. I've have the same garage door springs for 15 years, and I just had them replaced. You will use this rack EVERY SINGLE DAY. You're coming out way ahead in the plus column!

@josephjdesouza 2 жыл бұрын

Good build. You might want to consider using washers or a base plate before putting on the bolts. This will prevent the nuts from ripping through the wood and help distribute the weight.

@CurmudgeonExtraordinaire 2 жыл бұрын

Yeah, it definitely needs some of that... Fender washers or maybe some 1/8" thick, 1" wide steel bar with holes drilled in it for the threaded bar to go through to distribute the load across the board in the attic better...

@zzzz-ok7733 2 жыл бұрын

Nice & practical, that's what it's all about. Thank you for posting.

@kenfett7070 2 жыл бұрын

Love the innovation of this idea. I did something similar in a basement that sometimes gets water so I made a set of shelves on a dolly that had extended ends to store sheets of plywood. It kept the shelf and plywood off the floor but also let me pull it out and move it around to clean.

@scott6967 2 жыл бұрын

Great idea. Thank you for having a "normal" garage to show how this is coming together.

@francoisloriot2674 Жыл бұрын

normal garage 18x19?? maybe for rich people. in Canada a normal garage is 20x12 or 22x12.

@royromano9792 2 жыл бұрын

Really clever way to put floating shelves.

@samanthabailey2091 8 ай бұрын

Thank you so much! I was trying to figure out a solution for my garage storage issues and I think this video actually covered everything! Ur awesome keep making videos ! 😊

@chrismullin8304 2 жыл бұрын

I use a metal file cabinet for chemical storage. Idea compliments of “Essential Craftsman”

@ianfurqueron5850 2 жыл бұрын

I definitely agree with keeping stuff off the garage floor as much as possible. Either on wheels, or hanging from the wall or ceiling. In my garage, the foundation blocks are proud of the finished walls, so I often have shelves sitting on the foundation and then lagged into the wall studs.

@inspiringbuilds 2 жыл бұрын

Clever design and like the idea of hiding large plywood behind it as well as keeping it off the floor. When you epoxy your floors I recommend 100% solids and spend the time with the prep work. You have a new subscriber. 👍🏼

@Dancing_Alone_wRentals 2 жыл бұрын

The colors and the painting look great!

@fiouable 2 жыл бұрын

A lot of work and materials for such simple shelves for a garage.

@bottomup12 2 жыл бұрын

This inspired me to use the space behind my existing steel shelf.

@renragged 3 жыл бұрын

2:09 Are you sure that's Lowe's? Sure looks like a Home Depot price tag to me... ; )

@MrScotchcrotch 2 жыл бұрын

Definitely Home Depot.

@keithcee6378 2 жыл бұрын

Just in time for this video! Started to purge my garage and in dire need for good space and organizing. My mother I mean wife is killing me with the “garage mess”, new subscriber here, can’t wait to relax and go thru all the goods! Salute from NC!

@carlstroud1706 2 жыл бұрын

Love the concept of a hanging narrow shelf like that. Ive been constructing storage spots with French Cleat systems. Ill design something off a Cleat that will take it off the floor and provide space in the back. Bonus is since I have to brace the bottom away from the wall it will give me a hidden shelf for the sheets of plywood in back to also be off the floor.

@ssskids123 2 жыл бұрын

Love. The idea of using the chalk line. Been doing woodworking for most of my life and never considered it. Ha! Thank you.

@Youknewthatalready 2 жыл бұрын

Nice work man! I like all the thought you put into it's features.

@Maxspeed996 2 жыл бұрын

I like everything about this EXCEPTE at 7:02 you are using 2x12 lumber to hang all of the weight from. You've notched out almost all of the 2x12 leaving maybe a 2 inch section to support all of the weight. I would move them out to eliminate this failure point. I've been looking for something to use this space myself and stumbled across this video. I like the idea.

@randomeverything3023 2 жыл бұрын

Agreed, It bugged me right away when I saw the notches...

@valkyriefrost5301 2 жыл бұрын

The solution is to affix a 2x4 (or at least a 1x4) to the left side of the rafter underneath the notched 2x12, forming a ledge for the 2x12 to rest on. Then, the right side tail of that notch would not be needed.

@smithfamilydesigns2012 2 жыл бұрын

@@valkyriefrost5301 Exactly what I was thinking.. Small 12" piece of scrap 2x4 is all that's needed, and it would make this setup a LOT safer.

@ianfurqueron5850 2 жыл бұрын

Agreed. As soon as I saw that, I was cringing. I would also place something under the rafter as a cleat for the hanging board.

@corydeansmith 2 жыл бұрын

Would adding 90 degree angle brackets to connect the 2x12 to the rafter solve this problem?

@garycarriger4309 2 жыл бұрын

Great Idea to recover wasted space and have easy access to canned lubricants and other stuff.

@kastooMcFry 2 жыл бұрын

very neat job - giving me good ideas- thanks, Scott!

@ohnodevo Жыл бұрын

This is excellent. Going to definitely build derivatives of this in my new house.

@sammieseoul5544 2 жыл бұрын

this is great work.. I got a very bare garage and this helps give me some ideas.

@ChannelEleven59 2 жыл бұрын

Pro tip. Always prime raw wood especially when applying an oil based finish paint

@ScreamingEagleFTW 2 жыл бұрын

what happens if you dont?

@chrispagnotta9487 2 жыл бұрын

Scott, you did a great job. I'll be using this idea for my garage. You have a new subscriber. Keep up the great work.

@Hard_7_Iron 2 жыл бұрын

Well done Scott….

@Richard-nb4iv 2 жыл бұрын

Nice! I like it, especially the storage for the Jack stands and car Jack. I'm always looking for them in my cluttered garage.

@alexpena6948 5 ай бұрын

Man I really like that shelf. I’m going to build myself one. Thank you.

@B_Loke 2 жыл бұрын

Great thinking on not going all the way to the floor. When blowing out and cleaning the garage, it’s awful when everything gets caught behind a shelf or object.

@wendymontie5660 2 жыл бұрын

And the space on the side against the front wall - easy enough to get back in there and vacuum out/sweep out any spiderwebs in the usually quiet corner. Had it been tighter to the wall at that point, who knows what would be nested back there where nothing can get to it. (no offense to spiders, but there's a whole world outside the garage to find a meal and home in)

@meatball6930 2 жыл бұрын

I’m a contractor and enjoyed this. Great idea & i always leave space under i storage i build too. You don’t have to worry about the bottom getting wet too. Plus there’s always awkward stuff that can be stored under. You took a space and made it so many things can be stored in one place verses just a shelf. I really like it and me personally would add a couple more channels like you did at the top-maybe one on the bottom and one in the middle -just make those shelves thicker so they have a channel in them. This shelf could have containers or clips installed down the side for many other things too. Could even build a flip up compartment in the center that had dividers for screws and things. The list goes on and on on someone could easily just change a couple things to their needs. Good video-gets the creative juices flowing to expand on.

@wendymontie5660 2 жыл бұрын

Totally agreed!

@ScottsGarage17 2 жыл бұрын

Thanks for your positive feedback!

@VelvetEagleI 2 жыл бұрын

Would have been good to put large washers under the nuts as well to prevent the bolts from being pulled down onto the wood over time

@diversedad7954 2 жыл бұрын

Very cool idea. Not sure why I'm watching this considering I'm in the process of building a 30x50 shop but I love space management ideas like this. Good job!

@Natedoc808 11 ай бұрын

I’m used to having a respectable size shop, so when my wife and I were house shopping for a relocation and the real estate agents were claiming “large garage” “spacious garage with extra space for a workshop” I followed up with, “wait, this isn’t the walk in closet (pantry/coat closet/broom closet, etc.)?!” They were stunned, stammering, trying to salvage their sales pitch! It was classic. Settled for less house, larger lot, with a full size shop (25 deep x 50 wide) with loft over the single car bay with 10 ft tall door over the 40 ft section and lean to off the side. Also has a 10 foot rear add on that runs the 50ft width that serves as my parts and storage warehouse as it came with shelving down the full length of each wall. I’m in the midst of reconfiguring it and may do a lounge up in the loft as the storage really isn’t needed.

@shocker14369 2 жыл бұрын

This was a great idea!!! Would love to to this in my garage.

@BruceLyeg 2 жыл бұрын

Great idea and execution

@royl395 2 жыл бұрын

I like the color Rock Bottom. That's also my birth stone.

@39FORTYWATER 2 жыл бұрын

This is really thoughtful. I didn't get the wood rack and the space be hind the shelf and I did notice the clearance on the floor. It's not a floor to ceiling. It support from the rafters. That is good thinking 😲👍

@MushyMaan Жыл бұрын

Absolutely Brilliant! I think I am going to follow similar design.

@ScottsGarage17 Жыл бұрын

Thanks!

@MrPatdeeee 2 жыл бұрын

Great show kind Sir. It will be a good item to do ourselves. Thanks for sharing it with us.

@felipelim7201 2 жыл бұрын

Good ideas. Thanks for sharing.

@markoconnor7381 2 жыл бұрын

I like the look of the rods on the outside

@janodjano5828 2 жыл бұрын

Cool idea I'll be modifying it and making it cooler 😎

@BusyBeeLiving 2 жыл бұрын

Great job on your first design in fusion! Way better than my first attempt!

@joshportelli Жыл бұрын

I love the 2x12's spanning joists. I did same, but also some larger dia washers under those nuts, since all the weight is trying to pull the nuts thru the wood. Just makes me feel better

@bobmariano3731 2 жыл бұрын

Very well done !👍

@chuteu260 2 жыл бұрын

Awesome idea

@michaelcheeto6213 2 жыл бұрын

So good job.

@carbonunit6573 2 жыл бұрын

If only I could move that fast I could get all my work done and keep my wife happy.

@Rc51gemini900 2 жыл бұрын

Great work

@JarheadSixRides 2 жыл бұрын

What a great idea! Thanks!

@mikeycars213 2 жыл бұрын

Nice Ford Escape

@hdhellion4128 2 жыл бұрын

Great job

@onelapduster 2 жыл бұрын

Excellent project my boys and I can do together.

@benoitchartrand5772 2 жыл бұрын

Nice idea!!

@imochiexe5056 2 жыл бұрын

Great idea!

@hattrick-df4bo 2 жыл бұрын

Love the idea, would have to modify for my particulars (no access above) but pretty cool!

@erikgarcia6537 2 жыл бұрын

Great Job

@davesdoors9395 2 жыл бұрын

As a garage door installer/Technician I can tell you that servicing or repairing your garage door whenever need is gonna be more expensive for you because of this shelf being in the way

@jakal172 2 жыл бұрын

As a former mechanic. Or ask any mechanic. The space to work on or repair the garage door is a luxury. Compared to working on a modern car. As the spaces are so tight a college girl would be jealous.

@kjm5593 2 жыл бұрын

@@jakal172 i have 4 college girls so i shouldn’t have thought this was so funny… but i did… 🤣😂🧏🏼‍♀️🤦🏼‍♀️😂🤣😂🙊🙈🙉

@jrod3868 2 жыл бұрын

Good design!

@chachonetwork 2 жыл бұрын

Looks good!

@scp8412 2 жыл бұрын

Love it man!

@MB1BUMPER 2 жыл бұрын

Great job and great idea as well

@pd5224 2 жыл бұрын

like your creativity!

@Robert8455 2 жыл бұрын

Cool idea for otherwise wasted space. I think the MDF might sag after a while especially in humid environments so I'm curious how its holding up.

@wendymontie5660 2 жыл бұрын

Yeah, that was my (admittedly mild) concern, too. But, he can always tuck in some painted-out mdf midspan pieces easily enough. I'd probably use plywood for the shelves or include midspan supports at the outset. Not dissing on Scott, I just know that 'Murphy' is alive and well (my husband is too, he used to do avionics engineering), and I'd have a sagging problem sooner than later. I definitely like the idea.

@CurmudgeonExtraordinaire 2 жыл бұрын

Yeah, definitely a concern... He's apparently in Texas (car license plates) and there are areas that are comparatively dry (at least as compared to the Houston area where I'm at). There's no way that I would use MDF for shelving... Like with particle board, it's strength is mainly in compression, not tension... Combine that with the humidity around here and you would have sagging shelves pretty quickly... Having owned a house with cabinets that used particle board for the vertical pieces in the carcasses and seen what damage a little water can do to them over the years, I will not buy *anything* made from it again... Not sure what part of Texas he is in... The subdivision does not look completely flat, so that means that it is most likely not the Houston area... Maybe Austin or Dallas... He has an insulated garage door, so I might be inclined to suspect the Dallas area since it does get slightly cooler there than in Austin...

@neto24k96 2 жыл бұрын

You my friend earned a sub. Great work

@commonsense6611 Жыл бұрын

I never thought of having shelving in this area, but I think it is an excellent idea, as there are enough typical household small items that such use makes good sense. Thanks for showing how extra storage in this area is possible. My goal is to once again park my car in the garage where it belongs, like when I first moved in. lol...

@veganconservative1109 8 ай бұрын

Significant other had to clean due to new garage door install. First time I'd seen the entire garage floor in ages. I should have snapped a picture to remember what it looked like one week later.

@larcoal2963 2 жыл бұрын

Cool idea

@2002trooper4me 2 жыл бұрын

I think this is a great idea, but I am a bit concerned about your boards you used in the attic. Since you had to notch them so significantly to fit around the rafters there isn't much meat left to span the gap between the joists. I would check them often for signs of cracking or reinforce them to carry the weight across that span. Aside from that, neat idea, and well executed.

@mbaker825 2 жыл бұрын

I was thinking the same. Should have sistered a board to the rafter under that board for more support.

@hipairbrush1053 2 жыл бұрын

I also see no need for a ten foot all thread. Just bolt it from the top. 8 inch bolt would hang that. I'm not a fan of the cross beam. I would've used steel. Nice idea with clutter hiding storage behind the shelf.

@2002trooper4me 2 жыл бұрын

@@hipairbrush1053 I can see the benefit of running the all thread to the bottom. What he is trying to accomplish is to carry the weight from the bottom like a normal floor bearing cabinet would. If he were to suspend it from a bolt as you suggested the cabinet would be trying to pull itself apart from the top plate as currently built. It would need to be constructed a little different for this to work, but I see where you are going with it.

@Rafi_l 2 жыл бұрын

You kept saying Lowe's but anyone can tell your video is showing Home Depot signage , saw station and orange decor accents to wonder what other discrepancies are being overlooked?

@seetheworldfrommyharley 2 жыл бұрын

@@Rafi_l maybe he is like me and swore off the Home Repo due to their crappy corporate idiot mentality

@louielou8262 2 жыл бұрын

Really nice! Great idea

@threeriversforge1997 2 жыл бұрын

Very nice design. I particularly like the rods that hang the shelving. I might be able to do something similar in my little blacksmith shop! If I was to suggest one thing to others watching this.... if you don't want the hassle of going through the ceiling, you can make hangers that mount to the ceiling with glue and screws. Drill a hole for the threaded rod in some 2x4, then counterbore the wood to make room for a Tee Nut. When this is mounted to the ceiling, the Tee Nut is captured between wood and roof material so it can't back out or pull loose. The 7" of clearance behind the shelf would even allow for gusseted brackets to be mounted to the wall so the shelves could hang from it.

@BenJamin-iz6yc 2 жыл бұрын

Or coulda just screwed into the wall frame and save yourself some wasted space, time and money.

@threeriversforge1997 2 жыл бұрын

@@BenJamin-iz6yc Not necessarily. The wall studs would have needed to be where you needed them, plus you would need to build some kind of hangers that spaced the cabinet off of the wall to get that gap for storing sheet goods. Doing that would have put tremendous strain on the wall anchors and likely resulted in something that just ripped out after awhile. Never mind the problem of it swinging around on you.

@ismaelrojas01 2 жыл бұрын

I have been struggling to think of how to use the space better for oils fluids ect for cars I’m not going to copy and past but gave me an idea of how to thanks to this video thanks

@LAWJIC 2 жыл бұрын

Great idear . Never heard of the threaded rod design.

@marlaplunk2833 2 жыл бұрын

nice work, Scott. I am currently trying to solve the problem of garage organization myself. This was helpful. One of my issues is sheet materials, and your idea is awesome. Although, one couldn't store anything vertically or bulky next to the shelving units that can't be easily moved to get the sheet materials pulled out.

@CurmudgeonExtraordinaire 2 жыл бұрын

"Garage organization" -- the process of attempting to store 100 pounds of crap in a 50 pound bag... :) I prefer to keep things off the floor of my garage also... It allows me to use the leaf blower to clean it out periodically and the power washer to clean it further if need be... I don't have sheetrock or MDF in my garage, so a power washer does not damage anything... Everything is either concrete, bare wood, or Hardi Plank...

@MikeyJr. 2 жыл бұрын

Neat idea. I have the same concerns with the MDF as most others do. And the space to work on the garage door springs. Having storage behind the shelves for plywood or whatever is wasting that much space next to your shelves, as you have to have room to slide those sheets out. Garage wall space being at a premium, it seems that is almost useless if you need more wall space to hang things

@rockymntnliberty 2 жыл бұрын

I've been thinking of doing something similar in my garage, except I'm thinking of putting the shelves on a trolley so they could be moved back and forth to access plywood etc behind them. Also I'm thinking of a second slider in front that would be somewhat like a door, but with a pegboard on it for a yard tools. This would give me storage basically three levels deep, but relatively easily access.

@keithosterkamp6207 2 жыл бұрын

Just remember if you make a slider you will need an equal amount of space on the side you are sliding toward for clearance.

@matthewjohnston1017 2 жыл бұрын

Functional and looks good. My take is that MDF is the worst product to use in an outdoor environment (is painted so hopefully doesn’t go out right away), all-thread was a bit of overkill for mounting solution but works, and I would have added shelf so plywood storage behind is off the ground

@Destroyer1320 2 жыл бұрын

Great idea thank you!

@Stahodad 2 жыл бұрын

I have some extra narrow thin lumber called "strapping", normally used to attach drywall too. I can probably make some shallow shelves with that stuff.

@denali9449 2 жыл бұрын

Lordy, what is this world coming to? 19' x 20' is not a 2 car garage. We were looking at houses in Florida with 21' x 22' garages and vetoed them all because of the garage sizes, no way to open the vehicle doors. Don't builders realize that garage space is more important than living space? Finally found one with a 24' x 35' 3 car garage with 3 - 9' x 8' doors. Going to have to remodel the house but we got the garage we wanted/needed.

@nicholasr7987 2 жыл бұрын

Yeap...throw in a water heater, electric panel, water softener, and sometimes airhandler......one car garage is left

@CurmudgeonExtraordinaire 2 жыл бұрын

That's one of my complaints about houses these days... It's like they are designing the garages under the assumption that everyone has a Mini Cooper or Fiat 500... He's apparently in Texas, so there is no excuse for that... A 2-car garage should be big enough to put 2 full size pickups or Suburbans in it with room enough to open all the doors and not hit another vehicle, plus enough room in the front and rear to walk around the car easily without opening the garage door...

@CurmudgeonExtraordinaire 2 жыл бұрын

Considering the fact that he has a table saw and some other large tools in there, I suspect that his garage is either just as a workshop or at best could have 1 car in there when he needed to work on it... The table saw is likely to prevent putting 2 cars in there at the same time... He's in Texas and it's not uncommon to see people who have multiple cars parked in the driveway and no room in the garage... Often it is because of the size of the vehicles since a full size pickup might be a bit difficult to fit in one of the garage unless it was COMPLETELY empty... I had a pickup for 14 years and it never saw the inside of a garage and the paint was still good... I've seen pickups will less age with the clearcoat coming off though... I figure it was because I didn't wash it that often and the dirt was protecting the paint... :)

@VQ.automotive Жыл бұрын

Never move to europe than🤣 this garage is considered a big garage here🤣

@Natedoc808 11 ай бұрын

I e never like the three separate doors. I’d rather have a double door and single door instead of 3 bays

@MrChrisHobday 2 жыл бұрын

Love it 🤙🏼

@jwsnotruth7106 2 жыл бұрын

awesome !

@Norm475 2 жыл бұрын

Since I am pushing 80 I sold my duplex and decided to rent. I no longer wanted to deal with tenants and the maintenance was getting too difficult for me to do. I gave away most of my larger tools but I still needed substantial storage space. I purchased some 18" shelves from Sam's for around $100.00 each they have wheels and shelf liners. They have them at 12"-18" and 25" wide. Great value and very sturdy for the money.

@terrylabbee2116 2 жыл бұрын

I like the setup...In the future instead of cutting a 2x for in the ceiling - use can just use some B-Line/Uni-strut. Less tedious that having to clearance joists :)

@M3_86 2 жыл бұрын

Very nice!

@flixman4717 2 жыл бұрын

Just found your channel we are now friends very informative

@r.a.o.c.2592 2 жыл бұрын

This is great, I am looking for ways to maximize storage and spaces in my home. Thanks for the ideas.

@ScottsGarage17 2 жыл бұрын

Just so you know, I’ve been getting a lot of negative criticism from garage door repairmen who have watched my video who say it is too close to the rails and will cost more if you ever need to get your garage door spring repaired.

@r.a.o.c.2592 2 жыл бұрын

@@ScottsGarage17 Sir there will always be someone with a negative comment. I have a sloped ceiling in my garage, and I am looking for the best idea possible. I just thank you for your time, experience and a possible way forward.

@sloppyjoe1315 2 жыл бұрын

Cool idea but I would never use MDF for anything but maybe a workbenche top it warps far too easily and wont last long at all in a garage where temperature and humidity changes dramatically

@gibsonzak75 2 жыл бұрын

Nice 👍

@BillHartCooks. 2 жыл бұрын

Nice.

@TalmadgesArcade 2 жыл бұрын

Really cool design! I love that you can store sheet materials behind it, something I always have trouble storing. Good job, thanks for shairing.

@ltbigdog 2 жыл бұрын

Neat, I was thinking imagine putting that on a suspended rolling track.

@ScottsGarage17 2 жыл бұрын

I like that Idea! If ever you need the garage door spring worked on you could roll it further away.

@nodave77 2 жыл бұрын

Very nice! I wonder if you could also utilize those rods for hanging small items. Two nuts per bar with a rod or sheet between them and you would have a shelf or hanging rod that you could adjust the height as needed. I'm going to keep this shelf idea in mind after OSB sheets come down in price and I can redo my garage.