Getting the Deltaforce Vortex 34 Water Ready Again - Linkage Rod & 8mm Bullet Upgrade

No video

Getting the Deltaforce Vortex 34 Water Ready Again - Linkage Rod & 8mm Bullet Upgrade

Рет қаралды 1,011

Ай бұрын

VORTEX HYDROPLANE HULL (16, 24, 34")
www.offshoreelectrics.com/pro...
LINKAGE ROD AND SWIVEL BALL END
www.offshoreelectrics.com/pro...
8mm BULLET CONNECTORS
www.offshoreelectrics.com/pro...
RECOMMEND RUDDER (current TFL rudder is to small)
Speedmaster 1" rudder assembly 1⅝" setback
www.offshoreelectrics.com/pro...
Leopard X2 4082 (1600kv)
www.offshoreelectrics.com/pro...
200a G2 ZTW esc
www.offshoreelectrics.com/pro...
25kg DS servo
www.offshoreelectrics.com/pro...
40MM carbonfiber motor mount
www.offshoreelectrics.com/pro...
Speedmaster 21 strut HYDRO/SHORT
www.offshoreelectrics.com/pro...
.186 3/16 flexcable
www.offshoreelectrics.com/pro...
5mm to .187 coupler
www.offshoreelectrics.com/pro...
8mm SILICONE COOLING LINE
www.offshoreelectrics.com/pro...
LARGE WATER EXIT
www.offshoreelectrics.com/pro...
36" long 1/4" brass tube
www.offshoreelectrics.com/pro...
MEDIUM COWL LOCK (perfect for the vortex 34)
www.offshoreelectrics.com/pro...
Mad Lizard original turn fin
www.madlizardproducts.com/pro...
Venom Carbon 6oz 2x2 twill Carbon Fiber & epoxy resin
www.ebay.com/itm/115173374556...
Thanks for Watching ironclad rc tinker test and tune everything
Personal contact information ironcladedout@gmail.com
Facebook
share/eknUp8...
TikTok
www.tiktok.com/@ironcladrc?_t...
Instagram
ironcladedo...

Пікірлер: 21

@jimstone5339 Ай бұрын

Your son was so proud that he did a good job. His smile was from ear to ear and made me smile too. Give that young man a raise!

@gnarlyrc6482 Ай бұрын

I cut the saddle tape beforehand with scissors and stick it on with the non-cut side facing towards the hatch opening. Love your channel 👍

@user-wl9qc3ll8s Ай бұрын

Saddle Tape Overhangs! This is what I do. Take a NEW strait edge razor blade (old, dull, dirty blades with rust spots wont work if you want a clean edge). Spray some WD-40 onto a paper towel. Wipe entire blade area on both sides with WD-40 not just the edge. Cut the excess tape from entire length of side in one smooth motion, while pulling the excess material up and away from the edge this way it wont catch on the blade and give you a ragged edge. Wipe blade with WD-40 before you cut each additional side. I am like you! I hate rough ragged edges when I cut saddle tape! This should help you get those cuts straight and sharp. I usually use 1/16” thick tape but should work just as well for 1/8” thick. Keep up the great work! BG4L Bro!

@sjorswouda6865 Ай бұрын

You're so good with the Axel man...I like that. The twin motor / servo mount, again, Art Deco ! The 'STIHL' 35 orange - carbon inlay looks awesome, my favorite....

@paintendaveextremecollisio8057 Ай бұрын

Nice man good to see the little man giving you a hand👍

@IRONCLADRC 21 күн бұрын

Yes, thanks

@nealstarling5422 Ай бұрын

The duel motor/servo mount is genius Big B ! It really looks clean and tidy 👍

@IRONCLADRC Ай бұрын

Thanks 👍 hopefully it works as good as it looks 😆

@fierceflyer5 Ай бұрын

Look at the big box store for weather sealing tape, you can substitute it for the expensive hatch tape & it comes in different widths.

@Wanted1069 Ай бұрын

Lookin sharp, B!

@jamesatkinson7517 Ай бұрын

If your subscribed to m5 performance hydroplane, he’s got a video on using 3 nylon ties to gap the connectors so they can’t touch. It’s really good and simple.

@budgoblue6625 Ай бұрын

Nice job. Sweet rig!

@BeauLambert-yd5ln Ай бұрын

Very nice u should make an outboard mono hull with a pad would be good👌👌👌😎

@PatriotBrad Ай бұрын

get a small c clamp and use a socket on the threaded side of bolt. will help push those bushings in easier. Using the socket head bolt helps keep the bushing from getting ruined when hammered or pressed in like you had!

@IRONCLADRC Ай бұрын

I think that's how I did it in the past. Press fitted the Insert, thanks for pointing that out

@mikehaberski4596 29 күн бұрын

Im gona leave that 10” coment alone cause im in a good mood😂 Great boat i realy want to get into building boats kits are so much more reasonable priced than even buying a decent hull🤷‍♂️