Geyser Shower - In The Field Fix for Pump Off Too Hot

Рет қаралды 539

Жыл бұрын

We fix our brand new Geyser Systems shower unit out in the field when it stopped working after only one shower.... we had both the Pump Off Too Hot light, which prevents the pump from running, AND the Below 100F light at the same time with only cold water in the unit so something was wrong we had to fix. I contact Geyser thanks to the StarLink and get ahold of support who kindly gave me instructions to disable the too hot sensor...a safety feature mind you...so we could get a shower, thanks to Ian at Geyser support! See how it goes....

Пікірлер: 8

@petershearouse661 4 ай бұрын

Mine is doing the same thing. Thanks for the fix!!

@BirdPhish 4 ай бұрын

My pleasure....thanks for watching! Our's is still good a year later....

@evenflowoverland Жыл бұрын

I just googled this because my brand new non-heater version is doing this!

@evenflowoverland Жыл бұрын

Screw it! I'm using a 🪣 instead 😅

@BirdPhish Жыл бұрын

This should fix the non-heated version too….and if you just like extra hot water

@BirdPhish Жыл бұрын

@@evenflowoverland I’ve heard it takes awhile to clear the too hot faults if you add too much hot water so I’m just leaving mine disabled for the too hot temps fault..not exchanging it for a new one

@229Reaper Жыл бұрын

That's why I bought the non-heater version 😅haha!!!

@BirdPhish Жыл бұрын

I think the non-heater version has the same "Pump Off Too Hot" feature as well doesn't it to keep from burning yourself in case you add too much boiling water? The problem i had happened without using the heater to heat the water....it takes awhile for it to heat up the water heating at 100 watts so I was just adding boiling water as if I had the non-heated version. Either way thanks a bunch for watching and commenting!