Nice and simple. Great! One possible improvement: a bicycle seat locking device to adjust height.

Thee most UNDERsold thing i have ever seen on YT. You Cannot improve that idea, in terms of functions. Soo well thought through. YOU SIR, KICK ASS!

Genius! I looked for something like that. I will build that table in 2024 ;) Thank you!

I've been looking at the lagun table leg for awhile, but really didn't want to spend $200+ on it. Happened upon your video and just finished it up in my van. Love it!

So cool! I'm adapting this to make a bed table for an elderly person. I've been searching for this! Thanks!

Yes please do more how to videos on your builds. Also you have a very soothing voice and should be a book narrator.

I was thinking of a way to improve your design. Don't get me wrong, it is amazing, but imagine if you could leave the foot in place. If you drill a horizontal hole in the bottom of the ABS pipe, about 5 inches from the bottom with a diameter of a pin/screw. This way, if you pull the pin out, the leg would drop lower than the bed height and can stay in place. Lift it up, insert the pin and you can use it as you currently do.

Fantastic. You have just solved my problem for a fraction of the cost of off the shelf products

I made this for my Skoolie thanks to your clear directions!!

Great idea and so well explained and demonstrated! I will be using your design in my van in Oz!

So elegant in its simplicity and functionality - I love this table! Thank you for sharing.

Great video and would love to see more of your designs explained! Thanks for sharing!

Thanks, that was enormously helpful! I really enjoy these how-to videos, especially since you take the effort to explain each step and piece so carefully, so I hope you make more them.

Perfect plan for a table. Thank You!

I love your idea! so handy and yet so simple to build!

You have made me very, very happy. Thank you!!!!

Love the simplicity and brilliance of the design.

Good video and project! The parts are easy, the challenge is locating the leg. A lot of videos show the mistakes (and holes) people make while they experiment and try to figure out the location because of how it moves. People have to do this part slowly, figure where they will sit, if it needs to swing in a circle or not, where it rests, what it hits on the way, etc.

Thank you for sharing. Very ingenuous. Looking forward to more videos.

Yes please do the van build video. I really love all your videos and I'm excited about the new adventures with your homestead too!

I just made this ! It is the project I am most proud of! Thank you so very much for sharing this video and explaining how to make it in terms that everyone can understand

Pure gold. A fantastic idea. Thanks mate.

Perfect functionality. I have been looking for this for months!

In van life everything should have dual purpose and that 26" pipe doubles as van/house defense. Great vid dude!

Enjoyed the video very much. Possibly one of the best DIY vlog on youtube. Well edited and so informative, you got natural talent in front of the camera.

Supremely well done! I really enjoyed your video. I can't get enough of your camper van videos. Merry Christmas and be blessed, Michael

I am very glad I found you and your advice. This is perfect for what I need. Perfect in its simplicity. Again, I'm so glad I found your video. Thank you

AWSOME! Thanks for sharing. God Bless America and your family! Love Uncle Jeff!

Great design! We are seriously considering this for our van. Thanks for sharing!

We really enjoyed this video thank you so Much it has given us alot of idea's on how to build the camper table the right way and store it

Love it.. Thank You for sharing.. So far, this seems like the best, diverse option.

Love it! How simple and creative. Thank you for explaining all parts, sizes and assembly instructions. I always love campervan modification ideas, keep'em coming.

Thank You for posting this! Great idea.

excellent, Elegant Solution to a Tricky Challenge. Bloody Well Done Mate.😃

Totally awesome design. Many thanks

Love this video. Converting a Sprinter van shortly and I love this table idea

Would love to see the rebuild of the van. Have followed your journey and hope you continue to do some travel again. The new property especially the garden method was great. Told a friend who is starting a new garden on very soil about your garden. Again thanks.

Really like the table design. Pretty ingenious. I think I will use the idea in my van but modified to suit my purposes. Thanks for the video.

Love the way you explained it very thoroughly. Thank you!

Following your direction gave us an amazing table. Thanks so much for making this video!!

Love it! I'm in the process of converting a school bus and used your design to build two tables. Thank you so much!

I’m finally getting to build this table today. Thank you for sharing Dude!

Costs a bit more now for the parts in 2022 ($74) but still way less then a Lagun table. I did end up using 1" pipe as it was the only way to find all parts that would fit together at least at one store. Seems quite sturdy enough but my table top is a little smaller, too. Easy to assemble and works great! Thanks all these years later :)

Great idea! Simple yet functional

One of the best instructional videos I have seen.

I came here from exploring alternatives and I love their build and love yours as well! Thanks for sharing an amazing design with the rest of us 🤗🤗

your table is brilliant, prefectly explained. I did miss the lovely Miss Paula.

This is so perfect. I will be building this weekend. Thank you for the careful and detailed direction. You just made my van life a whole lot better. Blessings!!

This is such a helpful tutorial. Thank you!

That's such a cool table. Im going to build one for my astro van conversion. thanks for the advice!

That's a great table,functional and easy to make,now I wished I had a van to build one for😁

Great work on making a functional table and save space. Please post more.

This is exactly what I want to do with my van. Thanks for the great video.

Very very well done. Thanks for sharing.

100% the solution I've been after for my build, you've no idea how many different ideas I've looked at for this. I owe you man, thanks!!

Absolutely awesome table. Many thanks for sharing this.

hard to believe you're the only one to do a DIY Lagun table; well done

Thank you so much for sharing this table assembly. Best wishes and blessings in all you do!

Brilliant! So much more economical than the commercial alternative. Thanks for sharing!

So clever and simple. Thanks

This is amazing. Thank you so much! I can't wait to make something extremely similar in our ambulance conversion.

Simply beautiful. Thanks kindly

please do post more the van build -- thanks tons! And oh yeah, it's Paula's "turn"!

So glad I found this video. This is what I have been looking for this for months. Simple & easy to follow for us newbs. LOVE IT!

Built and installed today. My wife and I love it. Great design, simple and strong. Thanks a bunch.

Perfect! Was looking for a inexpensive version of a Lagun Table to store behind the driver seat and you nailed it! Thank you!

Truly excellent video! That is the table fitting that I was looking for, very pleased to find this DIY video, many thanks! I need this in my RV.

So glad I saw your video. I was about to try to make something similar with conduit. Thanks for sharing!!! This is perfect

Derrick, thank you so much for this very clear tutorial. Love this table and hope to put something similar in my minivan.

Efficient and well edited piece of video. Pretty sure you've solved one of the major problems of my planned build. Many thanks!

Awesome. Exactly what I was looking for. Thanks so much!

Fabulous! Very ingenious! Will do this. Thanks.

I'm so glad I watched this before my build!!!!

This is Perfect! Thanks for sharing this. Genius

One of the very best diy videos I've seen on KZfaq !

Great table and VERY helpful video, thanks!

Thank you so much for sharing this design and the wonderful instructions! Looks sturdier than a $250 ‘Lagan ’ table leg!

Best solution ever seen, Thanks a million

Genius. Absolutely the best reproduction of the old Westy pivoting table that I have ever seen.

The best solution to the wobbly pedestal leg that comes in many campers, like my truck camper. Pure genius! Thanks for sharing.

Thanks so much for sharing this! We've been looking for alternatives to the Lagun mount and this looks like a great solution!

Absolutely brilliant! Thanks for sharing this idea 👍

Excellent table design. I tip my hat to you, Sir. Thank-you.

You guys are legit. Thanks for putting this video out there. We are totally going to copy this setup.

Excellent... was ready to purchase the Lagun Table hardware. This fits our budget.

I'm going to do it! THANK YOU! Great, even 4 years later!

Very simple .Love it. Thank you.

This is a brilliant design. Great job!

Looking forward to more videos. Hope you are enjoying the cabin!

Simply Brilliant.. Thanks for such a wonderful demo and ideal.... Happy Camping :)

Thanks so much for this vid., i just made the same for my little camper after watching last night. It's perfect!

best explanation ever! 👏🏻😄thank you so much ! 🙌🏻

Not only was the design genius, but the video was as well! 🙏

That’s brilliant! Thank you so much for sharing! I can’t wait to build it on my own for my van 😊

really enjoyed how you layed out the DIY with narration.

FINALLY!!! A perfect and easy, cheap solution to my head scratching over making my table. Thanks so much for posting 🤗👍🤩

Excellent tutorial, thank you for creating this and saving us all a ton of money.

the best solution ever. Thank you.

Thank you! ...great design!!

That table is brilliant!!!