GL Racing GTR Project Introduction
Рет қаралды 1,008
9 ай бұрынIntroduction video to my new project: GL Racing GTR build for Houston RC stock touring class. 2S Lipo 2500kv.
If your local hobby shop carries this, please buy from them. Consider supporting my local hobby shop HoustonRC. All these items should be on their website here:
www.houstonrc.net/shop/1-28-o...
Additionally, you can email them the list below to order parts - HoustonRCRacers@Gmail.com
GL Racing GTR Kit - GL-GTR-SET
Must Have Option Parts -
GL-GTR-OP-004 - GL GTR Alu. Dual Steering Arm with Servo Saver Set
GL-GTR-OP-027 - GL-GTR Hybrid Chassis Set
Nice to Have Option Parts -
GL-GTR-OP-009-2 - GL GTR Alu. Steering Knuckles (2°)
GL-GTR-OP-020 - GL-GTR Screw Adjustable Shock (Front)
GL-GTR-OP-021 - GL-GTR Option Side Dampers
Electronics Gear, ETC -
GBY003 - 2S 360mAh Lipo Battery Pack
HRC2500KV - HoustonRC 2500 KV Sensored Motor
HRC06 Servo - HoustonRC HRC06 Servo
HRC Servo Horn HRC06
HRC3625C - Ceramic Bearings, 3x6x2.5mm (4pcs) (need 2 packs for the car)
@ninthislandrc 6 ай бұрын
Looking at the servo, and servo packaging, I'm 99% certain that the HRC06 is a rebranded AGFRC A06...and, looking at the HRC website, it's confirmed. Excellent servo. Going over your parts list, and comparing against mine, the only real difference I see is that you selected the 2-degree knuckles, while I'm considering the 1-degree knuckles. Any specific reason you went with 2-deg over 1-deg?
@grantfarrelly2821 8 ай бұрын
See you in stock touring buddy! I think with the 2500 motor you won’t want to run the extra brass plates. It’ll be too heavy. Curious to hear your take on the 2 degree knuckles. That’s the only option I haven’t run personally.
@atharsgarage4197 8 ай бұрын
Missed racing with you the last few times! Thanks for the tip on not running the extra brass plates. I was recommended to use the 2° steering knuckles for our tighter infield section. I don't really do the series races on the larger sweeping layouts, so I opted for the 2° knuckles over the 1° ones. Once I have them built, you are welcome to try them out on your car to see if you like it. What do you have on your car now?
Tech With Sanwal
Рет қаралды 321 М.