This GlowShift video shows you how to install our 7 Color Series Quad Gauge Package into a 2003-2007 6.0L Ford Super Duty Power Stroke.
Get this diesel set here: bit.ly/2qPMa7J
This Power Stroke Gauge Package features a Diesel Boost Gauge, EGT Pyrometer Gauge, Transmission Temperature Gauge, and a 100 PSI Fuel Pressure Gauge. Also included is a Super Duty Pillar Gauge Pod created specifically for the factory A-pillar of any 2003-2007 6.0L Ford Superduty F-250 or F-350. We went with this set of Super Duty gauges based on feedback from our Tech Team, who recommended these gauges and pod as the optimal fit for the 03-07 6.0L Power Stroke.
We kick off the process by demonstrating two different ways to install the Boost Line for the Boost Pressure Gauge. Option 1 involves cutting the Manifold Absolute Pressure Sensor (MAP) Line and inserting a Boost T Fitting Adapter. Once installed your thread in the Boost Gauge Adapter and then run the Boost Line to it. For Option 2 we install the Boost Line directly into the Intake Manifold using a Boost Line Fitting.
We add the Electronic Fuel Pressure Sensor using a 6.0 Powerstroke Fuel Pressure Gauge Adapter which we install to the Fuel Filter Housing. The EGT Probe is installed by drilling into the driver’s side Exhaust Manifold and securing the EGT Probe Sensor Adapter. Once the adapter is in place we thread in the probe. For the Trans Temp Gauge’s Electronic Transmission Temperature Sensor, we remove the Transmission Test Port Plug and install the sensor into the transmission.
Once all of the sensors have been installed, the sensor wires and boost line are run to the driver’s side firewall, keeping clear of any moving parts, and then into the truck’s cabin. After adding all four gauges to the Gray Quad Pillar Super Duty Gauge Pod, we proceed to install the pod which mounts to the factory A-pillar, making all necessary wire connections. Please note that the factory grab handle must be removed and cannot be used with this pod. This video will walk you through every detail of the process step-by-step and provide a complete breakdown of everything needed to install our F-250/F-350 Super Duty gauges and pod.
Additional Accessories:
Expandable Circuit: bit.ly/2tN0z82
Gauge Wiring Kit: bit.ly/2DcbtVB
Boost Line T-Fitting Adapter: bit.ly/2Mr2kyG
Fuel Pressure Thread Adapter: bit.ly/2Y15A9p
Transmission Line T-Fitting Adapter: bit.ly/2Xy0Zwz
GlowShift’s 7 Color Gauge Series features the option of the Tinted, Black, or White 7 Color Series. The Tinted 7 Series comes with a stealth-like tinted lens and black gauge face; the Black 7 Series has a black gauge face and magnified clear lens, and the White 7 Series comes with a white gauge face and magnified clear lens. All 7 Color Gauges come standard with ultra-bright analog LED displays, microprocessor-controlled stepper motor technology which allows for extremely accurate gauge readings and incredibly smooth needle movement, selectable 7 color LED through dial lighting, and an illuminated red needle that sweeps 270 degrees.
View our entire product lineup at www.glowshiftdirect.com/
Find us on social:
Facebook - / glowshift
Instagram - / glowshift
Twitter - / glowshift
#GlowShift
WARNING: This demonstration is meant to be a guideline. All vehicles are different and professional assistance is highly recommended for installing any gauge. As with all of our products, we recommend testing the gauge before beginning the install process.