Рет қаралды 20,594
Finally I'm back. Thanks to everyone for the support and messages over the years. I hope not to let you down with my future offerings and to grow the channel up to and past 100K subs.
This vid shows how controlling waste Oil Burner air and fuel can make for stable running burners. Drip feed is good and well for short runs when you are with the burner but to run it for many hours without constant adjustment, some automation and control is needed. I use a cheap Pulse type car Fuel pump with an electronic Cycle timer. This is the same principal used by the Chinese diesel heaters and one I showed may years ago in other vids.
By being able to feed a precise amount of waste oil into the burner, variations from oil viscosity and tank level changing are avoided. You can also take the waste oil fuel from ground level which makes handling much easier. The Blower is Controlled with a PWM controller available of Fleabay and other similar sites to match the air output to the fuel pump to produce a constant , stable flame.
I hope you all find this video and the ones to come as entertaining as before and thank you again for all the kind messages of support, concern and encouragement. It was much appreciated and extremely Humbling.
I hope to be doing many more waste Oil, Solar and other videos on a regular basis from now on and improve my content as I get back into the swing of things.