Great video, very helpful. Thanks for taking the time to show us all how and where to fine the Camshaft Sensors.

Just to add to this I know it was a couple years ago but I've had lots of experience with these and the timing chain has slack in it which causes codes to be sent out that says the camshaft sensors and the crank sensors are bad when in actuality they're good they're just reading off of a sloppy timing chain so you can change all these but changing the timing chain guides and water pump while you're in there is the best way to solve all your issues.

Thanks for taking the time to show us

Thanks for the vid man. This was a good video. It' helped me understand where they were

When you had to take off your high pressure fuel hose, did you need to do anything to keep the fuel from gushing out? I just tried to do that and fuel just started flowing out. I'm obviously not a mechanic and I'm trying to fix this myself. I had rags under it in case there was some that came out but there was so much I ended up tightening the bolt back on. I felt like it shouldn't have been coming out that much... 😕

13 terrain 2.4L started making noise on passenger side of engine. Codes P0016& P0017, cold weather low oil. I’m hoping it’s sensors and not the timing chain

I ordered A and B they do not say A or B on the box are they identical?

Another thing that helps is taking the battery out to get to the cmahshaft sensors

Amazing! Thank you

Jeremy ur vedio help thank u with my small fingers mayb I can get to it easier thank you

What was the reason for you to change those sensors?. I'm asking because I have a 2012 gmc terrain I feel the when I drive it for 1 hour or so it won't go more then 30 miles per hour and I hope is not the transmission

Tengo una duda son dos colores los sensores debe ser a fuerza sor negro con negro i gris con gris?

How do you know the Solenoids/timing shafts are what need replaced? Can you do so without a reader?

I bought a intake solenoid and it came out black? It’s okay that? My car it’s leaking hella oil from the solenoids after I traded the grey solenoid to a black one.. but also fits in the solenoid spot which isn’t supposed to fit if was the exhaust solenoid?

Thank you

Good video, thanks, so are two camshat psotion sensor? Thankyou..

Changed all mine was the chain at $3000 to replace so now I drive a Ram

I have a 2013 Equinox 2.4 and the Camshaft repair is on the passenger side. They are 3'long and are called intake and exhaust. learned this from AutoZone and kid on KZfaq. You have the Crankshaft repair... Si?

What tool did you use to take off the fuel line to get to the sensor?

I have two questions. (1) Is the camshaft and knock sensors the same, just different names? It keeps showing me the same when I look. (2) do you still live in the same area cuz I’d love for you to check my car out. I have 2010 terrain I’m in la marque as well.

How do you turn the camshaft by hand, to install high pressure fuel pump? Thanks

Those are Intake and Exhaust "Camshaft" position sensors.....not crank.

What do it mean if you have a 2011 terrain it drives good but when i stop at a red light it shut off it only shut off when I stop and its in drive please help

What was da code you got when yu scanned your car?

I need help finding out what sensor needs replaced on mine. I’ve had it in the shop twice now and again another problem. :/ help over phone anyone ?

What error code came up for you

Get back to me on reaching that back sensor B.. because I can get my hand in good position, did you remove anything to get to that back sensor B at the firewall.. please get back to me..

Thank you so much on video was having hard time finding sensors A an B. I think after this I'll stick to old American muscle no more new crap.

Can you just clean it and put it back

How did you remove the high pressure fuel line? Just pull the thing out after you loosen the nut?

If you remove the high pressure fuel line will fuel disperse from it?

I did mesed up my terrain 2010 because I decide to change the oil from 5w30 to 10w40 was't the good idea messup those olenoids cam shaft sensors and my timing belt plus the guides brok timing chain was grinding the engine block til It make a hole so do not change the recomended oil esp. Factory

I'm pretty sure that a Metal Fuel HOSE is called a LINE.