It's awesome that someone did this whole process and recorded it for the world. Even if it's a crazy amount of work and not worth it, it's cool that people can know that now! +1

Nice work brother! thanks for sharing.👍😊

I am just starting out on a project. I do not use heat to remove chips from ram sticks or any boards. Waste of energy. In many cases if one just bend the boards and with a Stanley knife at one corner the chips will literally fall off.

I had always thought only the gold fingers contain gold, good to know RAM chips also have it. Out of the 0.84 g gold you got, any idea of how much is from gold fingers and IC chips respectively?

Quite straight forward. Less than 1 g per Kg is a typical yield from what I have observed. Many claim much more (up to 3g) but that seems to be the exception.0.8g is realistic, but there may have been quite some Pd as well which you lost in that procedure. That is why I would recover Ag and Pd first using HNO3 and then proceed to AR and dissolve the gold. I love that blender machine!

People, chemists do recommend using protective gear for a reason, the fumes and the liquids involved in processes like this are not safe to play around in your usual kitchen and bathroom. Also use a calculator, butane torches, special glass containers and chemicals are much more expensive than what you'll obtain by selling the final extraction.

Hello Iman. Great clip. Thank you 🌹 Arne 🇳🇴

Hello; I would like to ask you how to melt the valuable metal on the motor plate and what items to use! Thank you

Cut the fingers off the ram and use HCl (copper 2 chloride) to remove gold foils. That gold will be almost 24k. Adding the sticks with lead, tin, copper, etc into aqua regia is not only a waste of acid, but makes the recovery less pure and increases waste solution. After recovering the foils from copper 2 chloride, THEN refine in aqua regia or bleach/hcl

I keep watching these. I have lots of computer parts, just saving for now till gold prices climb. Think I'll leave the melting to people smarter than me and just sell the parts someday. Fun to watch though, thanks.

Was anyone else expecting one of them huge gold bars at the end you see in the movies 🤣 That seemed like a huge process for a tiny speck of gold 😒 Thanks for the upload though, interesting

This is only worthwhile on a large industrial scale. And then you should also recover the other important material contained in circuit boards and electronic chips.

8:15 Neighbors from the top floor probably sometimes think, what the hell is going on in our city, it’s impossible to be on the balcony without a gas mask! 😃😂

How did you convince that SMB to drop just the gold selectively without the silver copper tin lead and other various assorted base metals presents in that solution? I'm asking because that's a very neat trick I wish I knew how to do but I've never come close to doing it myself and I'm wondering if there's something I'm doing wrong or if you just so damn good at it everything behaves better for you

For maximum yield, you have to first strip off the layer that is covering most of the gold with caustic soda before processing the boards...then you'll get all of it...

납 (PB)찌꺼기가 하수도로 들어가도 괞찬나요??

I’m pretty sure you used 2-4x more cost in the chemicals than you got back in gold. If you trim the gold fingers, you could use 1/10th of the chemicals. And I’d separate the gold foils first by sitting them in sulfuric acid first, then you’d only need a few drops of nitric to dissolve that. Never premeasure Aqua Regia. Cover in HCL then add a few ml of Nitric at a time until gold is dissolved, then you don’t even need urea since you only used enough nitric to do the job. Nitric is expensive, lowering the amount of that you use is the only way to maximize your cost of recovery.

بسیار مفید و کاربردی ، مرسی استاد ❤

감사합니다 ~~좋은영상잘보았습니다 ...........❤

Parabéns pelo lindíssimo trabalho 👏👏

Crazy how some counties allow you to wash toxic waste down the sink...at least you made 40 bucks out of it.....

Thank you for your nice video extracting gold metal. I just wanted to know also the weight of square tips and epoxy base board each.

이런방법도 있다는게 흥미롭네요, 애써주심에 감사합니다. 전기분해 방법도, 또 다른 방법도 있을것 같은데~

Good technique and good use of acids, I really like your blender too! 👍🏼

It looks as like you're making crepes on that griddle😂 How many ram cards are there, like 100 cards? Wouldn't you make a lot more money if you sold all those whole rams?

RAM lerin sadece IC Chip'lerinden mi 0,83 Gram elde ettiniz?Yoksa Altın kaplama Pin'leri de ilave ettiniz Yongalarıda dahilmi? Teşekkür ederim. Güzel video

My, my. Three thousand years ago the Argonauts used the Golden Fleece of a ram. Now we are getting gold from RAM.

Must be a rental house. Washin that stuff down the sink

I think you'll expent more money in chemicals than the amount of money you'll get for the gold recovery, plus you'll get the FBI on your back when you buy the chemicals wondering what you need that for lol

Selam. Chips neden ayirmak gerekiyor? Hepsini birden blander dan gecirsek ve sonra kimyasal tepkimeye soksak olmuyor mu? Altin sadece chip lerde mi kullaniliyor?

내일은 DDR램 500g 따라 해볼께요 영상 감사합니다 ㅎㅎ

Noooo less than one gram with all that material and hours of work? Totally insane, man...it absolutely doesn't make any sense: rummage through the waste like a beggar to collect a lot of heavy and bulky PCs, transport them, dismantle them, buy all that chemical rubbish and various equipment, breathe poisons for hours with the anxiety of doing something wrong, clean everything up and dispose of the waste. And all this mess and jumbles just for a paltry microscopic 0.85 of pure gold? If you find an honest gold buyer, they will pay you roughly close to $20. It's just not worth it!

Hey I have one question. Where do you get your supply of quality rams and cpu's could you please tell me.

daha yeni izledim helal olsun üstadım ellerine sağlık

This seems like a lot to do about nothing. The chemicals probably cost as much as the finished product 😔

Parabéns pelo vídeo. Aqui no Brasil, acho que não da para fazer esse processo, porque só o valor que vão pedir em 1kg de memoria + todos esses produtos, fica mais barato ir no ourives e comprar 1 grama de ouro pronto. Aqui o grama está R$ 489,00, isso do 24k, esse valor convertido em dólar dá aproximadamente U$ 94,95.

Здравствуйте Какая мощность гриндера? Пробовали молоть без обжарки? Заранее пасибо за ответ.

He spent a ton of expensive chemicals, a lot of time and got a drop of gold.😐

Great work Iman nice yield , but looks like your hotplate and around it needs a serious cleaning bro .

This video seems to have been made by someone who doesn't want every person to extract gold from electrical components. He made it so complicated and invested in unnecessary substances and actions, when in fact it could be much simpler

It's impossible to tell because it's fast-forwarded which we appreciate but out of curiosity about how long did it take you to depopulate all these RAM sticks of their chips with the hot plate?

What was the % of gold in ram pins and chips compared?

Before adding the water, nitric acid and hydrochloric acid you did get rid of the left over solder and tin of there was right?

в конце ролика надо открыв окованный сундук доверху наполненный слитками небрежно кинуть в него новый слиток, давай показывай заначку)

ddr1 모델이 금함유량이 좀 적은걸로 알고있는데..sop타입ic보다 ddr2 bga타입ic에 금이 많은걸로 알고있습니다. 추출하는영상은 처음보네요 잘봤습니다!👍

Nice video, thanks :)

Very interesting video! I'm interested in the grinder you're using, can you share the make and model?

Наглядный пример как делать не надо

Lots of people collect computer scrap but it's nice to see gold being recovered. I always assumed it was a very small amount.

Assalamualaikum brother can gold particle dissolved in (HCl+bleach) according to Trinity gold refining

Very good,wonderful job👍🤝

Мне кажется он потратил больше,чем получил

Yeah. How smart or safe was that, when you rinse that black powder down the drain? Who knows what toxic stuff was still there ..

WOW, i'm amazed by this whole extraction process. I only have one question. How many DDR RAM did you need for It be 1 Kg? 🤔

Es más el gasto en químicos y procesos que lo que realmente se recupera de oro...impresionante el desperdicio de agua

selamun aleyküm kardeş.videoların çok eğitici teşekkür ederim.yalnız ürünlerin kalayını temizlemeden işlem yapıyorsunn.biz kalay yüzünden kral suyundan çöktürme yapamıyoruz.seninkiler çöküyor.bir sırrı varmı acaba.senin yaptığın gibi deniyeceğim.bakalım sonuca ulaşabilecekmiyim.hurda bulmakta zorlanıyormusun.antalya biraz sıkıntılı bu konuda.şimdiden teşekkür ederim.iyi çalışmalar.

there is a crazy amount of safety concerns and lack of care for the environment rinsing stuff in the sink, burning stuff without a vent and filters for the smoke

Hi~thanks for clip. would you let me the grinder brand and modek no.?

Looks like you left some gold in solution. Hopefully you tested with some stannous chloride. Or maybe the yellow color was from your FeSO4. Thinking maybe more urea to denox completely...

Hope you got a mask on to protect your lungs. All the gold in the world isn't worth your life. ❤️

Безумие! Реактивы, для добычи этого кусочка золота стоят больше самого золота! Где рентабельность?

usta sizin yeriniz nerede, sadece altın geri dönüşümü mü yoksa paladyum platin gibi geri dönüşümler de yapıyor musunuz?

its worth it only in very large quantity. 1 kg dram memory sticks only yield 80grams of gold and needs a lot of chemicals and fuel to extract.

Cool demonstration 👍. $40.9 USD of gold that needs further refinement. Far far exceeds the price of anything used except maybe the tweezers? 😂 Personally, I'd test them and resell what can be. I imagine though, if you work around or have access to RAM and other parts it's probably worth it in the lonnnnnnng run.

I'm so happy I made productive decisions about my finances that changed my life forever,hoping to retire next year... Investment should always be on any creative man's heart for success in life.

That loop... That loop... That loop... That loop... That loop.......

So spend over $200 in chemicals and supplies and end up with a $53 gold nugget and poisoning your entire apartment complex. Got it. 🤣

that gold is worth 50-60 euro; the work and cost for all ressources and chemicals... ? idk... 300 euro?

A lot of work for $60. And I'm sure the neighbors are just thrilled by the smell and exposure to toxic materials. Also, gotta love the safety shoes....

There was so much going on I totally forgot what I was even watching , and then all that for a spec of dust 😂.

Did you immediately do the Goldfinger Aqua Directing Method? Is that possible? Don't you have to detach the gold from your finger first??

Imani kuvvetli abim 0.84g senin harcadigin malzemeyi cikartmaz ki :/

22k isnt pure and if you did your aqua regia step correctly which it looked like you did your purity should be 99.99 at least which is 24k

For 46€ gold you spend over 100€ in acid products. Nice job

Evde ekmek yapımı, şarap yapımı, viski yapımı, mazot yapımı derken altın yapımına da geçmişiz. Hayırlı olsun.👏

What is the profit margin brother?

You know this video would have been more interesting if you hadn’t shown removing every chip. I know you fast forwarded it but that didn’t help my headache any. lmao 🤣. 🐎🌻✌️

You killing every one in your apartment block man.

I watched 17 minutes and I want my 17 minutes back. Now imagine how the guy in the video must feel

Well done!

Si se puede con mes nos tienpo

La experiencia tras obtenerlo, tiene que ser muy gratificante pero, no creo que merezca la pena tras los productos utilizados. Aun así, muy interesante!

nice bit of shiny at the end :)

The reaction is inmediatly. All electronics all full of gold

Holy shit, where do you even get ram that old, in that quantity, in 2022?

What about the gold inside of the chips? They’re made of pure gold circuitry. The older ones had almost an ounce of gold in them and that’s why they were so expensive. They figured out how to make them smaller yet they still are made with silica and gold,just less. Wouldn’t it make sense to pulverize them and extract the gold chemically?

Hi everybody, the question that immediately comes to mind when seeing this "separation of the printed circuits" by heating the RAMs is "Is the guy wearing a mask?" because the vapors must not smell like "CoCo Mademoiselle" ... I haven't finished watching the video because in fact it interests me more suddenly. La question qui me vient tout de suite a l'esprit en voyant cette "séparation des circuits imprimés" par chauffage des RAMs c'est "Est-ce que le type porte un masque ?" car les vapeurs ne doivent pas sentir le "CoCo Mademoiselle" ... Je n'ai pas fini de regarder la vidéo car en fait ça m'interesse plus du coup. Best Regards,

Явно много потерь при таком методе.

Was it worth it that's what I want to know

Thanks for the video! Cool to see, but definitely not worth it on a small scale. Chemicals alone cost way more than 1 gram of gold.

If you take a sip from the green liquid, i give you a 100 dollars.🤢

Видео о том как делать не надо.

Honestly you would not recover a half of what you invested in chemicals, not worth it

😂😂 All that work, energy, those chemical for a 8 points its not worth it man. Its juat too expensive but it was good work and fun loved it man.

Worth about $42 US dollars in Nov 2023. Lots of chemicals and consumables that eat into the profit plus several days of work. Not to mention the overall environmental impact. Not really sure it’s worth it (?) Super video though. Fascinating to watch! 👍

Are any of these chemical mixtures flammable???

38 giorni di lavoro per 0.89 gr di oro....

Go prospecting. Much healthier than breathing in toxic fumes and you get more gold.

Много золота потерял и смыл в канализацию. Реагентов перевёл больше чем стоит этот кусочек.

When you say neutralized are we talking about a solution with a ph of 7 to precipitate from?