"GOOD USED" | DewClaw vs. Deutz Diesel

Рет қаралды 294,613

3 жыл бұрын

"I say'd for sale, not ON SALE. Interesting trades considered. MINTY Fresh service, new voltage controller, rare two-tone battleship grey/rust. As is where is, come after dark."

Пікірлер: 1 000

@SueBobChicVid 3 жыл бұрын

How many of us have spoke the words, "I don't think it was this (what I just did) that destroyed it."

@philipcable7518 3 жыл бұрын

It might be.......but you'll have to kill me before I'll admit it

@Qwerty22091997 3 жыл бұрын

Are you looking at me working, hiding in the bushes?

@deadprivacy 3 жыл бұрын

even worse when you fix something by accident. you know ful well its 80% chance it will be back again

@faceplants2 3 жыл бұрын

@@deadprivacy TWA (Trouble Went Away) is one of the worst symptoms besides intermittent problems that can't be reliably reproduced.

@berryreading4809 3 жыл бұрын

Away with ye fluckszone bots 🖕

@BlindBatG34 3 жыл бұрын

It was working at shift change. That’s all I know.

@timothyvanderschultzen9640 3 жыл бұрын

Gold content deluxe.

@philipcable7518 3 жыл бұрын

It was fine when I used it last....................

@briangarrow448 3 жыл бұрын

Goddamned night shift wankers!

@mephInc 3 жыл бұрын

Sounds like a job for the straight day guys

@fredwupkensoppel8949 3 жыл бұрын

The secret is to put it back together JUST enough to make the next guy who uses it think he broke it.

@tree_carcass_mangler 3 жыл бұрын

Have you guys considered that maybe the purpose of that contraption was to make melted powdered copper? Seems to work just fine.

@fredwupkensoppel8949 3 жыл бұрын

It's not a bug, it's a feature!

@johnlever6696 3 жыл бұрын

You genius.

@cafenightster4548 3 жыл бұрын

@@fredwupkensoppel8949 Normally you have to pay for that sorta feature.

@pete_lind 3 жыл бұрын

At least he has now a smoke generator ... think positive .

@andrewcurrie101 3 жыл бұрын

Turns out it was an East German machine to make powdered steel.

@MolsonPeanut 3 жыл бұрын

It's a nice paperweight. Might need a bigger desk though.

@Big31sky 3 жыл бұрын

“Some times you’re just the electrician who happens to be there.” No truer words have ever been spoken.

@patsyprentice1875 3 жыл бұрын

The hard part is putting the smoke back in once it has been let out

@philipcable7518 3 жыл бұрын

If there's no flames it was on purpose....

@Stalkeroioi 3 жыл бұрын

I died XD

@Solron78 3 жыл бұрын

Impossible, once that "magic smoke" is released, there is no putting it back. lol

@samdavis5079 3 жыл бұрын

Smoke is a factory sealed component, they make just enough for the assembly line. The chemical compound is a trade secret and not available through the aftermarket.

@robertschofield1560 3 жыл бұрын

The smoke came outta the bottle But the genie did a runner with the rent years ago!

@vettepilot427 3 жыл бұрын

One of the most useful techniques that any troubleshooter can employ is to break it worse so you no longer have to guess what's wrong. Time is more expensive than parts anyway.

@HesTNTonPMS Жыл бұрын

Damn right it is !

@ahensley63 3 жыл бұрын

"It definitely wasn't what I just did that killed it."

@AnIdiotwithaSubaru 3 жыл бұрын

@@earlwright9715 its basically immunity to any and all law!

@FUKTxProductions 3 жыл бұрын

@@earlwright9715 90 ,, 99l(.8olo.lo' 8 879l342?

@jcarry5214 3 жыл бұрын

That fawn had already been chewed on before the dog I'm babysitting hauled it out of the brush. True story. Something definitely had bitten it beforehand.

@burnedupsparkytipsandrevie9597 3 жыл бұрын

I've said this way to many times

@bradnoyes7955 3 жыл бұрын

"It was just starting to put out right when it caught fire" story of my life

@MattLitkeRacing 3 жыл бұрын

If you get enough sketchy generators you may have enough parts to make one less sketchy generator. Or you’ll have a yard full of clapped out generators. Either way it would be good content

@philipcable7518 3 жыл бұрын

I once put a dehumidifier and a humidifier in room and let them fight to the death. Only the fittest survive...muhahhahaha

@fredwupkensoppel8949 3 жыл бұрын

Nothing more reassuring than having a bunch of components for testing purposes which may or may not be completely fucked too. Makes troubleshooting a bliss!

@jamesmay9345 3 жыл бұрын

Bubbles: Scraaaaaaap Metal

@roberta6641 3 жыл бұрын

@@philipcable7518 who won in the end?

@BobofWOGGLE 3 жыл бұрын

@@roberta6641 the audience

@woolymittens 3 жыл бұрын

Its this level of technological mastery that explains why Canada ain't launching a moon mission in any kind of near future.

@garmancathotmailcom 3 жыл бұрын

Canada Arm: Am I a joke to you?

@firstlast-xn6ul 3 жыл бұрын

@@garmancathotmailcom Claw your way to the moon with that robotic arm, will ya?

@tallskinnygeek 3 жыл бұрын

Hey now, they can surely _launch_ it.

@steve1978ger 3 жыл бұрын

@@garmancathotmailcom - still waiting for the Canada Finger to go with the Canada Arm

@Teth47 3 жыл бұрын

TBF neither is the US lol

@nicholasviney5975 3 жыл бұрын

DewClaw does his best billy joel "I didn't start the fire, it was always burning when the genny's turning"

@OleF112 3 жыл бұрын

Deutz is a district of Cologne/Germany /Köln-Deutz, the city of the Cologne cathedral. In the district Deutz is the Kloeckner-Humboldt Deutz KHD and Deutz and MWN Motoren plant. Famous for huge air cooled gas an diesel engines since the 1864. Co-Founder was Mr. Otto, yes, the real engine man ;-) Thats my hometown...

@rippspeck 2 жыл бұрын

Wieder was gelernt!

@cpfpv6410 3 жыл бұрын

Sometimes your the Forkee, sometimes your the forkor. ...sometimes you get to be both because you forked yourself.

@lucusloc 3 жыл бұрын

Pretty sure they call that last one "mastication". "Chew on that sh*t f***er!" . . . "Oh wait, that's me."

@totherarf 3 жыл бұрын

.... and sometimes if you are a bit smart you are .... fork-ed!

@johnpm1605 3 жыл бұрын

"Can we fix it?" "No it's fucked!" Strip it down and weigh in the copper, got to be worth about 5 Canukistan kopeks per Kg....

@philipcable7518 3 жыл бұрын

Could always put it on a couple of hundred grands worth of milling machine and see how many tools you can break on it whaa?

@JohnDoe-tx8eu 3 жыл бұрын

more excuses for him to mill copper again, yes please

@GrafRucola 3 жыл бұрын

Aprox the equivalent to one case of beer xD

@bodibrodice147 3 жыл бұрын

The ol' meth pipe has to be pretty darn hot before stripping things down for scrap copper begins to sound like a decent idea.

@kyledavidson8712 3 жыл бұрын

@@bodibrodice147 baaaah hahahaha holy shit

@Adamsadventures83 3 жыл бұрын

AvE: it's already broke, you can't break it any further. Dewclaw: challenge accepted!

@jorgeposadas1192 3 жыл бұрын

Hahahahahahahaha

@guardrailbiter 3 жыл бұрын

It may be broken, but it hasn't caught fire yet. So, I'll see what I can do. :-)

@tobiasjacobsen_dk 3 жыл бұрын

“Dewclaw is going to use his expertise”....... and his big ass tipped over box of crimps 😂👊

@dragontalontsiawd 3 жыл бұрын

Bro I had that happen to me recently, I actually fixed took me at least an hour... That shit sucks... I had the fancy heat shrink weatherproof ones

@Shroommduke 3 жыл бұрын

Is it DewClaw or DeuxClaw?

@dragontalontsiawd 3 жыл бұрын

@@Shroommduke he spelled it in the title dew claw... But for the french canadian I'm assuming Deux

@docferringer 3 жыл бұрын

@@Shroommduke It's god-awful thirty in the morning for me, so if you were makin' a joke I apologize for missing it. Dewclaws are considered to be a vestigial thumb on some animals. So basically whoever gave him that nickname thought he was mostly useless and an evolutionary dead-end. It's a fine nickname for an apprentice.

@Shroommduke 3 жыл бұрын

@@docferringer I did not know that, thank you!

@ZackJenkins 3 жыл бұрын

"Sometimes you're just the electrician that happens to be there." I felt that.

@johnnycrash343 3 жыл бұрын

May I suggest using the deutz to power a hydraulic log splitter, and crush the generator. So it can destroy itself, without destroying itself after it already destroyed itself

@askmeaboutarcticcats 3 жыл бұрын

I literally laughed out loud when I heard Obi-one diodie

@zolof911 3 жыл бұрын

I was expecting a much bigger diode....

@AEthridge13 3 жыл бұрын

Died over the "'My little hissy-fit" comment. Been there too many times; It's such a stress relieving benefit when you do something goofy and can just let out a curse of frustration over your own hurriedness, the black ice under your feet or the spilled coffee. Every curse is a second added to your life.

@andreasbachlindsmann1610 3 жыл бұрын

So THAT'S why i made it all the way to my 40's!

@mikem6176 3 жыл бұрын

Looks like I’m gonna live f*kn forever.

@Ampera_ 3 жыл бұрын

At that rate I'll live forever.

@snowgorilla9789 3 жыл бұрын

Holy shit ima live forever

@C64SX 3 жыл бұрын

There's a nice little game called 'My summer car', from Finland, in which your in-game stress level slightly decreases every time you use the curse button. I love that feature and use it frequently.

@briannielson6903 3 жыл бұрын

All this talk of exciting magnetism and blowing out diodes, has the boys blushing.

@imitt12 3 жыл бұрын

2:00 "And that, dear viewer, is what we in the film industry call foreshadowing."

@Dethride69 3 жыл бұрын

Our 1st dragster trailer had a 2 cylinder Duetz in it and it was so fun to listen to guys used to draw straws to who had to pit next to us. Kalitta’s got stuck next to us at a test session and mysteriously it never ran again after that...

@fredwupkensoppel8949 3 жыл бұрын

Ah yes, Dewclaw is using what is known as "The Shaggy Defence".

@NewmanRacing 3 жыл бұрын

"It was just starting to put out when it caught fire.". Story of my life.

@loadapish 2 жыл бұрын

Yr doin better than me then. I dont even get to the stage of begining to win before it goes up in a blaze

@a.k.4550 3 жыл бұрын

Looks like all the excitement got the better of that one. I've been through this myself, but the prime mover was a turbo perkins 6 and it failed while I had two legs of the stator under as much single phase load as I could muster in the shop. Of course, your average enclosed discount generator won't have a single e-stop connected on the outside of the enclosure, not a problem till your generator cooling fan discharge is blowing fire and molten copper directly at the control panel. The good news is, in the five seconds between total meltdown and getting the engine to stop, it didn't manage to light off all the oil and fuel coating the top of the fuel tank inside the enclosure. Hurrah for small victories.

@JBOGermany 3 жыл бұрын

"Did you hit the kill-switch?!?" "YES!" "OK! At least one thing that works properly! It's dead now!" Put a sticker on " Assembled by Chech and Chong at the Up-in-Smoke-Factory"

@mrobinson4210 3 жыл бұрын

Came for the vidjeho, stayed for the comments. AVE’s comment section is humor genius.

@NvTwist 3 жыл бұрын

It’s still called “ELECTRICAL THEORY” to this day for a reason.

@wobblysauce 3 жыл бұрын

You cant see it and it can kill you... NEVER FORGET IT. Even if someone says the breaker is thrown, always test it first.

@disklamer 3 жыл бұрын

I thought I could smell the smoke but that was my ashtray catching fire.

@rynohorn3819 3 жыл бұрын

I miss my stinkin ashtray

@gsilva220 3 жыл бұрын

@@rynohorn3819 I'd ask if you stopped smoking, but judging by the nature of this channel, your comment might mean something else...

@cleanmachine08 2 жыл бұрын

This channel is a distilled list of all the things nobody is able to do at work. Neat trick to excite the windings.

@chasepalagi7675 3 жыл бұрын

4:00 I love the Jack Nicholson "Batman" reference! I assume he was anyway "Where does he get those wonderful toys!"

@davidyates748 3 жыл бұрын

AvE and Dewclaw content is the best content, cheered me right up for 5 minutes did that.

@Edder31 3 жыл бұрын

Thanks AvE and I suppose even Dewclaw for the videos you make! Long story still kinda long but my job got automated and I had to find a more stable career decently quick before the savings dry up and here we are now two years later! Went to trade school to be a Commercial/Residential electrician but fell in love with motors and industrial contrivances. Got a job now as a motor tech at a local shop that helps service the paper plant pump motors nearby and the taconite mine motors, going to get MSHA trained to do service calls for all kinds of problems from large motors, VFD’s, and simple push buttons. Love the work, enjoy the people (for the most part), and the pay is rather attractive. Couldn’t be happier!

@garyburchett9060 3 жыл бұрын

Well the good part is scrap copper is very high right now!

@bushratbeachbum 3 жыл бұрын

So is dew claw!

@bobster1982 3 жыл бұрын

Watch that powdered copper. The dewclaw will be sticking it in his next joint!

@cpfpv6410 3 жыл бұрын

That Fluke 233 remote display meter is a man's best friend!!

@stevelentz9458 3 жыл бұрын

That little Makita battery managed to stop the great clanking diesel, I'm impressed.

@Tagawichin 3 жыл бұрын

At one time I was the lucky fellow who got to start up the generators for the first time after they were rebuilt. I had to pull out the lucky 9v battery and touch the terminals to the exciter leads on the AVR a few times. That was the last step before swaping the AVR. I only had a genny smoke at the start of a run or a few 500hz that would blow smoke near the end of the run. The smell of the stator insulation is very different than burn wire insulation. It reminded me of wet straw, and about 30 seconds later the smoke would be rolling.

@flatlinesup 3 жыл бұрын

you should turn it into a machine that makes copper bb's... it looks to be useful for that.

@petewood2350 3 жыл бұрын

I would like to write a comment where you pointed, but you would have to come to NZ to read it, as I have written it in marker pen on my screen.

@HttVVHttCHHHtMtCotW 3 жыл бұрын

Yep, once you let that magic smoke out there's no way to get it back in there

@kuhljager2429 3 жыл бұрын

Its easier to get grey smoke powered stuff running again. Find the leak, and it can sometimes come back on its own. Let the white stuff out, and its gone for good.

@fittony 3 жыл бұрын

I'd listen to a podcast with these 2 as host. Anyone else ?

@tomkeehn 3 жыл бұрын

or just a live stream of them fixin shit that may or may not already need fixing

@tree_carcass_mangler 3 жыл бұрын

Seconded...

@challenger3603 3 жыл бұрын

All in favor say Aye...........................

@tree_carcass_mangler 3 жыл бұрын

@@challenger3603 Aaaayyyeee!!.

@feellucky271 3 жыл бұрын

No Fuck no. What time?

@crackedemerald4930 3 жыл бұрын

I always find incredible how you two work without looking at eachother

@fuzzfacelogic789 3 жыл бұрын

Black hole meets Black hole.

@keithjurena9319 3 жыл бұрын

Liberal use of the word "work". Get the two together and something fucky is going on.

@zrxdoug 3 жыл бұрын

Looks like it needs one o' dem expensive factory smoke reinstallation kits..

@ukaszSkowerski 3 жыл бұрын

Another great one :) Consider hiring DuClaw as your sidekick full time, he always brings so much joy and laughter to your videos.

@justin512100 3 жыл бұрын

Did you meggar the windings or just use the DMM to look for ground faults? Either way the magic smoke is gone clean out of her now. Looks like a good opportunity for generator necropsy/BOLTR.

@sarkybugger5009 3 жыл бұрын

He'll never get it on the healing bench.

@iaov 3 жыл бұрын

It’s really hard to get the magic smoke back in to these things , even with the talent of a Dew Claw.... I used have to tell people “ I’m an electrician, not a necromancer “

@joefrayling9263 3 жыл бұрын

I like that, better than mine which is either "she's a goner" or "needs a half-day out with the undertaker"

@orangetruckman 3 жыл бұрын

You created a situation that pointed to the problem 🤗 that’s how it’s done 🤔

@WeighedWilson 3 жыл бұрын

Diagnostic backfire?

@als8518 3 жыл бұрын

@@WeighedWilson fire diagnostic, always highlights the problem

@thebrowns5337 3 жыл бұрын

This channel sets my mind in the gutter as soon as I see the title page... with the title on this one I was sure it said under spanker. Then I wondered what that would look like. Lol, wrote that before I watched. Loe and behold three and a half minutes in and spank is mentioned.

@dfunited1 3 жыл бұрын

The 5 minutes and 45 second ad at the end for Forward was great 👍👌! Apparently I need an SF based tech-health company to tell me what's not chooching right! Damn it I need to install an adblock on this phone

@joshuahoneyfield3347 3 жыл бұрын

"Return of the dewclaw" sounds like a film a once saw "im here to inspect your box and remove your shorts" 😂 I say let the smoke out give her the proper send off she deserves

@inaz1963 3 жыл бұрын

Up until the moment it started belching out smoke I'd had no idea that thing was made by British Leyland.

@peterrenn6341 3 жыл бұрын

Nah.. it started on the button

@ron3365 3 жыл бұрын

Man, your vigios bring smiles to my face bud. Hope your doing good up in the land of winter and mystery

@josh7720 3 жыл бұрын

That nervous laugh from dewclaw at 5:48 says everything you need to know

@LMO169 3 жыл бұрын

Never clicked so fast when I saw a Deutz engine is featured

@BrokenRRT 3 жыл бұрын

Me too! I have one with a 11kw generator sitting in my backyard. Other than hooking up a battery to see if it will turn over I’ve never replaced the needed fuel lines or belts to see if it works.

@Blinx159 3 жыл бұрын

How do I sign up for your apprenticeship program, I already have my own broom

@longjohnson7267 2 жыл бұрын

"I can't see, fuckin- I'm high as fuck, can't see, what do you expect, man?" I have more in common with an electrician than I ever thought I would

@marekb1988 3 жыл бұрын

Really enjoyed. Do not check windings insulation resistance, do not check rotating diodes, do not test by applying voltage to excitation windings from 0V from bench supply, then you will hear that engine takes to much load. Just buy new AVR, and apply 18V from accu when usually voltage

@thingyee1118 3 жыл бұрын

Yep the old "It wasn't me that caused that"

@gekolizzard 3 жыл бұрын

Holy cow...he’s got 2 Flukes. All hail the master

@fennyferrister668 3 жыл бұрын

How would you know if your meter was accurate if you didn't have a meter to check your meter?

@FixItStupid 3 жыл бұрын

@@fennyferrister668 LOL The Tools & How To Use Them B+ & Current = 2 Meters Ok Now ? When You Do The Work .........Fix IT Tech. a Little Bit

@michaelhazen8658 2 жыл бұрын

I have a cracked piston from a deutz. From the back of beyond in alaska. the tale goes that the fellows had it shipped out and had a hell of a time getting it started. somehow they decided to bypass some things to get it started. One of those was supposedly a circuit that prevented it from running if the oil was low. and they hadnt realized it was shipped dry. supposedly the thing finally let go after running in a great deal of pain for an unexpectedly long time and threw bits in all directions in a mechanical "you can take this job and shove it!" tantrum. an apocryphal tale, I say, because I wasnt there. I just have this cracked piston cigar ashtray as a conversation piece gifted to me by a mechanic with a thousand yard stare.

@unclegoober8523 3 жыл бұрын

Loving the short videos from all these "Exotic Locations"....

@emmettmccloud4790 3 жыл бұрын

Never would have thunk to try anything like that. I'll have to keep something like this in mind next generator I trip over in the yard

@martinda7446 3 жыл бұрын

Goddamn! Built like the Tirpitz and DewClaw sinks it faster than the whole of the British fleet could manage.

@robertheger9048 3 жыл бұрын

I think the Tirpitz was sunk by the Royal Navy while at anchor somewhere in Norway.

@martinda7446 3 жыл бұрын

@@robertheger9048 Yes, I just chose a ship...I thought about the Bismarck, but Tirpitz sounds funnier. The Tirpitz was scuttled by the crew. They were expecting the whole fleet , but it was a ruse. In fact the Bismarck was also scuttled after being bombarded by thousands of shells and torpedos it refused to sink.

@bfrazer4126 3 жыл бұрын

4:00 how electricians/electrical engineers test things.. Nice easy to follow wiring, the proper connectors, a switch to shut it off. The healing bench: How wrench turners and mechanical folks test electrical contrivances. Stick the pokey bit in the receptacle, let the smoke out, then back a quarter turn.

@tassiehunter7184 3 жыл бұрын

These two guys together are fucking hilarious, need more of this content. What a series you guys could make

@Broken_Yugo 3 жыл бұрын

I've only done a few, but every old genset (small one lung stuff) I've revived, some sitting for decades, came up fine on its own within a minute or so. I've always figured flashing the field was more a thing you did when the last guy fucked up and reversed the field connections or whatever.

@feellucky271 3 жыл бұрын

Aye Never seen it otherwise but this multiphase may be a different animal.

@AxelWerner 3 жыл бұрын

DUDE!! These things never go bad! its like a tank. you killed it :'(

@keithjurena9319 3 жыл бұрын

@@raygale4198 Stamford you say? Lima MAC are the bestest. No need for a clunky AVR. Complex as frig in the winding department but double vacuum dipped in epoxy windings mean none of this fuckery with makeshift BC copper foundry as was demonstrated in this videjo. And bolting a Lima MAC to a Deutz is the paragon of brick outhouse design.

@bpdrk1 3 жыл бұрын

The diesel starts and runs fine, gotta be a use for that down the road. Dewclaw wasn't far off trying to energize the field with the battery. I got a really nice Homelite generator that would not make electricity. Plugged 1/2" drill into it (generator not running) turned the check backward a bunch of times, fired it up and it has run great ever since. Turns out it was shut down under load, killed the magnetic field. Would not have believed it if I hadn't done it myself.

@aaronarcher2356 3 жыл бұрын

I was so excited to see a new vijayo I clicked without reading the title. I was getting ready to do the same thing to old slant 6 driven welder. I may consider other options now!

@nascar20970 3 жыл бұрын

Now you just need to find a farmer that blew up the engine in his generator and make 1 out of 2.

@randomeddie185 3 жыл бұрын

At 5:30 right as sparks start to fly, if closed caption is on it suddenly says "applause".

@chrisbleurgh7425 3 жыл бұрын

Lol, amazing catch.

@lakesideinc 3 жыл бұрын

Deutz is one awesome motor,,, i have a 4010 Ditch witch with all the attachments (thats alot to run) and this little 3 cylinder air cooled motor runs it all and dont even bog down ,,, everyone i talked to said they run forever with standard maintenance done ..... from dead cold 0 degrees this thing starts right up just as it does in the heat of summer ,,, and does it with out any heater ,,,amazing machine

@jmbutlerjr 3 жыл бұрын

The Canuck version of Antiques Roadshow!? Cool!

@joncutt872 3 жыл бұрын

I always just use a drill to re-excite the windings

@Nick_1911 3 жыл бұрын

A fine ark welder , its a shame it wokred only once , but it weld them coils pretty nice ...

@sparky6086 3 жыл бұрын

As the saying goes, "It's better to be an arc welder by trade, than by accdent"!

@pierredelecto7069 3 жыл бұрын

As a farmer this is all true. I collect all kinds of partially working antiquities.

@BY-bj6ic 3 жыл бұрын

documentation of wanton malicious destruction is what we always tune in for thank for another exciting episode.

@graemedavidson499 3 жыл бұрын

It’s just going through a phase…

@m1stertim 3 жыл бұрын

down here, GAC means galvanized aircraft cable... what's it mean up there?

@feellucky271 3 жыл бұрын

GAK As in dropped my GAK or gak box and now it's scattered.

@maulerrw 3 жыл бұрын

2:30 I've literally started my car with an 18v makita before. Found some building wire in the boot, stripped it and shoved it in the contacts and onto the car battery. Waited about 10 seconds and she cranked right over. Voltage needle was a touch high but when the bobsled team is on strike you do what you've gotta do

@s.weldingandfabrication4287 3 жыл бұрын

Ive got a 95 Deutz f3l 1011in a lincoln classic 2, easily one of the best diesel engines out there.

@ManCaverTools 3 жыл бұрын

Love the location AVE

@Remo860 3 жыл бұрын

The electrician that just happens to be there. I bet that happens a lot.

@DarkVegetaman 3 жыл бұрын

Used to drive around an AGCO Allis 6680 with one of them fancy air cooled Deutz motors (past the time of Deutz-Allis and their pea green units, this was a purdy orange). Drove fun, but had a weird gray interior on par with a 1990 Geo Prism lol.

@wrstew1272 3 жыл бұрын

Mr. AvE, I have just read thru far too many responses regarding your lack of skills in predicting a less than perfect audio condition. Now I, being a poorly educated individual, come here for the comedy and occasionally a modicum of learning. BUT, there are quite a few audiophiles whom also visit here to complain about their tender eardrums. Could you please use the comfuser sort thingie and tell them fine folks where they can send them new microphones, cameras, and editing equipment to? I am sure that they, being here, would be more than happy to help you with your video recording efforts. Y’all are doing fantastic telling this guy how lousy his sound is, cough up, or blow it out yer pie hole. I really enjoyed the experience, can’t figger what their issue is, but my ears ring all the time from a loud work background. You make me laugh, so I keep coming back.

@brandonmofo 3 жыл бұрын

Why do I have this feeling that everything you own is half broken and a pain in the ass to borrow?

@BlazingBlakesGaming 3 жыл бұрын

"As is where is, come after dark" on my way

@MitzvosGolem1 3 жыл бұрын

Unless windings were burned or open I found they can be repaired easily. Bridge rectifiers often are bad so no excited field or theAVR is often bad as well. Sad that one is toast. I have that Deutz engine and it is excellent. Loud but cool motor.

@timothyvanderschultzen9640 3 жыл бұрын

I learned a lot from this video. Thanks

@stoffel89 3 жыл бұрын

Rewind the coils vs whatsa new one gonna costya?

@zolof911 3 жыл бұрын

Looks like there might be a hatch for easy access to them?

@stoffel89 3 жыл бұрын

@@zolof911 i worked at a armature rewinder. You need a crane/block and tackle to keep the the middle part of the genny up. Split the generator part and the diesel engine part. The rotor seperates from the diesel engine output shaft via flex coupling/ spider coupling. 2 man job. Luckily Uncle bumbleforks got the dew claw to help him out. But for the rewinding part there i didnt do. Only removal and fitment of rotor/ stator and bearings/ couplers etc. The back side of the roto got exciter coil with sliprings and diodes and a main coil in the centre of the rotor, and the stator got the main coil. Each should be tested. The ohm reading on each coil must not be down to earth. Their ohm reading must be balanced. You must test the the insulation of the coils also with a megger and ask the apprentance to discharge it by touching it with a finger or so. If all of them check out good. Replace the AVR. As simple as that. Not the fuckery the dewclaw did.

@dennisreid4428 3 жыл бұрын

Hello from the UK finally managed to find a video that I'm not at least a week behind

@jay90374 3 жыл бұрын

Unless you are a patron you are always a week behind!

@philipcable7518 3 жыл бұрын

That's what she said...................I'll get my coat

@martyk1156 3 жыл бұрын

Next comment in line 5 days ago

@dennisreid4428 3 жыл бұрын

@@jay90374 remember,I'm 8 hours in front of you, so my working day finishes a little sooner than yours! Day,week,Pah, whatever,night time here now

@gbean 3 жыл бұрын

Definitely already had a shorted stator winding. The way it loaded up when you excited the field...

@SHarris64 3 жыл бұрын

Hahaha… I see the sticker on there from where I worked!! Lol those Duetz engines don’t die. Lol 😁

@neomancer86 3 жыл бұрын

Is the audio out? i'm hearing it all on the left channel?

@UberAlphaSirus 3 жыл бұрын

What?! There's audio. Damned this left ear!

@kemc77 3 жыл бұрын

mine is fine, only 1 speaker here

@bassmith448bassist5 3 жыл бұрын

Stay tuned for the next episode of DewClaw and the Deutz Smoke Show!!!!!

@Chris-gq6cz 3 жыл бұрын

Fricken funny. Just started noticing the location pins in the description.

@ChatNoirLe 3 жыл бұрын

My guess is the field residual magnetism went and while trying to fix it the gen phases were moved and shorted, so once you put some power back into the field winding you got a few 100's of amps shorting which is why the motor bogged down and the pretty sparkles.