Love viewing how other engineers operate. Your a good man bro for taking the time to film and upload. 👊🏾

Many thanks for the tuition, I have had a Nest for over 12 months!! Yesterday was the first time the water worked independently to the heating! Yes I know I should have got a qualified all singing all dancing Nest engineer to fit it……but I didn’t and after this informative video it’s all working how it should be! Cheers 👍🏾

thanks for this video. its great to see finally someone doing the step by step and not just cutting (usually) the most important parts. you even explained every step. I have Vaillant boiler that has 3 - 4 - 5 terminals both on boiler and current termostat (its Vaillant VRT 230) from which the 3 and 5 are line and neutral, and the 4th is basically the switch wire. So If I understand right in that situation I would just need to connect like you did use current wires for line and neutral, and then my switch wire from terminal 4 I can use as you used a gray wire in heat link (think its in number 3 terminal in google nest heat link). thanks again for detailed video

Brilliant video, exactly what I needed. Thanks. 👍🏻

Just letting you know I enjoy watching your videos you have some good tips. Keep up the good work mate.

Great video and explanation as usual from you

Great video, glad you are back 🤙

Great video pal, just started following, like nest but really like hive due to expandability 👌🏼

Bro you saved me £120 installation fee. God bless 😊works perfect as explained.

Thank you very much for this video, incredibly useful. I have a vaillant ecotec pro 24, and a nest thermostat 3rd gen. The one thing I did differently was not to remove the u shaped wire link on "Burner off" connector. It then worked like a charm. I must say, am not sure I understand why

Good job 👌 thanks for your efforts 👍👍

Just want to say thank you so much for this video. We had a new boiler fitted with a new nest, sadly the nest was not turning the boiler on and off as it should after watching your video and checking the wiring I spotted that the fitter forgot to remove the red loop that was inside the boiler. Problem solved! We are over the moon 💪🏼

Great Video, amazing

Great video 🙏🏿

Great video! Very detailed and helpful. Quick question, what size mm wire are you using in the video? Thanks!

Thanks for the video. My ecotec plus handles both heating and warm water. Does that change anything to the installation? As it seems you only use it for heating, right?

Amazing 👍

Brilliant sir thanku

for the rt do you take the original one out? Or do you put them both in

Hey thank you for your video! I see I don't have an RT (switch) connection plug in my Vaillant. Does that mean the Nest is not compatible? Thank you

Great video have you installed an Centre thermostat. Where on the boiler would you instal the T1 and T2 cable.

Hey. Long time no see bro. Good to see an upload. Very informative video again. What make is the electrical screwdriver set in the velcro pack btw. Looks really useful.

I have a Zaegel Held boiler, it heats the tap water and the heating system, i still don't know how to wire the heat link, did you have this type of combi boiler ?

Great video thanks! I need a smart thermostat just for hydronic floor heating. The Nest has fan and cooling options which I would not use, any other simpler alternatives? Also each floor has 7 circuits so I would need to fit 14 connect modules which sounds to be an overkill tbh. Where did you order the nest from?

Can I also control the hot water with this boiler and Nest V3?

Nice one.

Wicked video..

Have a Nest and want to link it up to a Vaillant eco tech 635 system boiler but already have a Honeywell board installed with loads of wires so don't know where to start. Could get someone to do it but i love to do these kinds of jobs myself and learn along the way.

Cheers mate, I got the link in the wrong place first time! Ha

hi mate , this is Nest 2 generation or 3 gen? thanks .

Hi Pal, your video is great. Thank you. Can you tell me how to wire vaillant ecotec pro 24 boiler to Nest 3rd generation Heatlink via Opentherm. Thank you

Nice vid bro! What wiring block did you use for N.L.E terminal

Mam ten termostat i jaką najniższą temperaturę wodę można ustawić? U mnie 55 i niżej się nie da, a jest za gorąca ;)

Is a hub required to run this thermostat on the app?

Very nice video. Is there any chance that you create video about connecting Nest Gen.3 with Opentherm Module VR33 and Vaillant Eco Tec Plus Boiler? Please...

Can you help me to understand what's wrong, why the thermostat can't find the heat link? Please)

Hi,I've made the same conditions but the heat link doesn't have a blue light,it's orange all the time,I've reset but anyway

Cheers, excellent video. Do yo know if its the same for a Valiant EcoTec Plus 630 ?

why does my boiler does not have a RT plugin... :'(

Where did you buy the cable stripper?, great video, thanks

Thanks for the video. My Vaillant doesn't have that RT plug (other than that it's identical). Does that make the Nest Incompatible?

I have an ecofit pure 825, the circuit board is different but the concept/connection is the same. Sadly the wiring shown didn't work for me. When I turen the temperature up, the boiler doesn't fire up.

Do you also heat your normal tap water with the boiler? I have the same and still don't know how to wire the heatlink.. I'm changing the current thermostat.

I'm missing an RT connection on the circuit board. Any suggestions which setup to run then?

Great video brother

It says dont compatible if the wire has that shape like hair like thin and many. But u connected with no problem? Why do they say that it s not compatible then

Is it illegal for me to have a pop at this if I'm not gas safe qualified

I have exactly the same boiler and same nest thermostat, installing this way dosnt seem to work, it appears to look at first however once I remove the 24v rt bridge the boiler defaults to 50 degrees flow temperature no adjustable (d005) even through flow temp is set higher (d071) anyone got a solution to this?** found out what the problem was, the old vaillant thermostat base station was the cause of 50 max flow temp, removed it and this setup was spot on**

Where are you based?

Can you install for me?

Can I just hire you to it for me. If your London base message!

Shouldn’t be cutting out earth wires, also could have been wired without a link in the heat link. Honestly don’t think heating engineers should be allowed to wire boilers.

so complicated...

Bad filming. Camera moves too much.

Good job 👌 thanks for your efforts 👍👍