LEEDS PLUMBER - NEST THERMOSTAT INSTALLATION

Рет қаралды 147,559

4 жыл бұрын

How to wire a Nest Thermostat. Plumber showing a Nest learning thermostat installation onto a Viessmann boiler. Viessmann 111 with a nest. Also wires the same on Viessmann 100 and Viessmann 050 combi boilers. Central heating tips and tricks. Always use a Gas Safe Registered engineer when working on gas boilers.

Пікірлер: 151

@mfielding007 4 жыл бұрын

Another great video Alan, I got a hive last year, went on utube to see how to wire it all up, found it very easy to do, they are so good, can turn it on when you are on the way home on cold days so it's nice and warm when you get back

@matthewwootten9082 2 жыл бұрын

Thanks for taking the time to put this video together 🙏🏻

@0coolio 3 жыл бұрын

*The first one **do7.pl/google** failed in finding my network after 2 weeks, but tech support was superb and the eventual exchange was stress free. Second one fine.*

@AllenHart999 3 жыл бұрын

Glad you like it!

@AllenHart999 3 жыл бұрын

Merry Christmas

@johnjackson7191 3 жыл бұрын

Thank you Allen for your very helpful Nest guidance... hope to show my support to you now by giving to your very worthy children's charity ... good luck John Jackson

@AllenHart999 3 жыл бұрын

Thank You

@peteyeoman2720 Жыл бұрын

Hi Alan Many thanks for your video, I'm changing a Honeywell thermostat over to a Nest wireless one .Your instructional video was a great help,

@elwittinio2865 4 жыл бұрын

Nest or Hive, fitted a few Hives but no Nests . Nice video Alan 👍🤙

@gulammangerah1137 4 жыл бұрын

Allen I am Having ☕ and watching your once again good content. I look forward to your videos thank you 👍👍

@AllenHart999 4 жыл бұрын

What type of video would you like next. Thanks

@gulammangerah1137 4 жыл бұрын

Hi Allen, if possible video on water softener system and maintain good water pressure from the water softener system . Thank you

@saleemhussain6795 4 жыл бұрын

Love your videos Allen 👍

@ajmalsafi3774 Жыл бұрын

Thank you very much Alen.

@cctvvlogger8835 4 жыл бұрын

Great video Allen very helpful indeed 😊

@gimbalair 3 жыл бұрын

very helpful Allen. I have the vitodens 100W, i have identified my terminals on the boiler. The Nest Heatlink appears to need 240v and then i run the other 2 wires back to 1 and L on the boiler. so 5 core cable. L,N &E from the boiler circuit into the heatlink. Remove the link between 1 and L back at the boiler and use the greay and black spare wire into 2&3 at heatlink end and 1 and L at boiler end. If i have understood you correctly. Thanks

@Shadow1734 6 ай бұрын

Great video, I found it nice and simple. Thank you

@MrG.42 Жыл бұрын

Excellent video, thanks for sharing.

@gamereva6413 3 жыл бұрын

Great video. Do you also wire a separate 0.75 from the fuse spur into the boiler as well. Thanks.

@yusufh403 Жыл бұрын

Hi Alan nice video, so this 5 core you have on your video are they all going straight back into the boiler? Or are the live and neutral coming from a separate supply?

@mariusm5187 4 жыл бұрын

As always great video, what about connecting best using OpenTherm connection?

@kenrickfagan628 2 жыл бұрын

Brilliant, very useful video

@24-7ttplumbingheating4 4 жыл бұрын

really good video mate

@Uzi-ro1mm 4 жыл бұрын

Great video Alan I’ve learnt a lot from it. Can’t wait for the next one :)

@kylejoel87 3 жыл бұрын

Another awesome video, can you use Opentherm on a two nest as i got a zone down stairs and a zone upstairs? Thank you

@shuaibmohammed4749 3 жыл бұрын

Thanks mate great help

@jackhoskins722 4 жыл бұрын

Great video I fit hives but very similar

@CatholicAventures 4 жыл бұрын

Please do an updated video on your gas tool bag. What have you changed and what tools do you carry in it now? Cheers.

@RaminM12 3 жыл бұрын

you are a great man and i like your vide.......

@mazhariqbal3630 3 жыл бұрын

Great video, I have got question, could we have separate independent main supply feed for a nest heat link and it doesn't need to be connected to combi boiler main supply spur, secondly could we have underfloor wiring centre switch wires connected to boiler switch wires in junction box just before the heat link boiler switch wires feed. Would that be possible both systems underfloor heating and nest can work both independently? As I have got a job where I have been asked to connect speedfit aura wiring centre for underfloor heating and nest for radiators, boiler make is Baxi platinum plus 40kw combi

@lemmykilmister450 4 жыл бұрын

Better wiring guide than you get with a Hive, that's for sure.

@andreiandrei-ct1eb 3 жыл бұрын

Thank you for the guid :D it helped me :D

@AllenHart999 3 жыл бұрын

Thanks very much for your comment, please consider subscribing to support the channel 🙂

@davidsurtees4439 4 жыл бұрын

With the thermostat itself I didnt have a stand for it and put it on the wall. Luckily for me the wall had an under stairs cupboard behind it with power socket in it for my tv that's on the same wall. All I did was drilled a hole thru it and plugged it up in the mains. Much better than hard wiring it. Well worth the 170 quid for it tho

@AllenHart999 4 жыл бұрын

Thanks.

@6GSF 2 жыл бұрын

hey allen good job , have you done one of these for a non combi setup where the hot water is tank based ?

@caosmar 3 жыл бұрын

Hi there Allen, Many thx for your videos. Have you ever try to wire an Open Therm Interface like this?

@ashkumar3171 3 жыл бұрын

Nice video , what’s the benefit of installing on off thermostat on hot water boiler since off time save energy however waste energy for recovery time

@ponderer23 4 жыл бұрын

Top video. Thank you

@hazley13 3 жыл бұрын

Hi, i had the 3rd gen nest in my old house with a oil heating. I have now moved to a new build with gas. My question is does the nest work better than the hive on gas?

@hornetlm42 4 жыл бұрын

Allen Hart I have a baxi 630 with a esi control fitted to the on off on the boiler.. But I am thinking of fitting a nest on opentherm, but when I take the wires out of the on off on the boiler into opentherm do I have to put a link cable back in the on off.. Thanks

@hrvpictures7786 3 жыл бұрын

Thanks for the video, I have bought two of these to replace with my Honeywell programmed thermostats , but the issues I am having is the Honeywell thermostats are connected to two wires only , how can I replace these please? Many thanks

@MrDherajshamoo 3 жыл бұрын

Hi Alan, Thanks for great videos. You’ve helped chose my combi boiler mate. Thank you I have viessmann vitodens 100-w 30kw installed this week and now need to replace the old two zone thermostat as one of them has been faulty. Is the nest the right thermostat for my boiler? Do I need need twin pack or just buy two nests?

@AllenHart999 3 жыл бұрын

Glad to help

@videosandmoremouse4626 2 жыл бұрын

Was very helpful

@CarlosWillis 3 жыл бұрын

I have a Honeywell CM927, I had a look at the wireless link wiring in there and it seems to have a NL connection and also another wire going to another L so NLL and then two wires going to A and B. What's the other live wire for?

@saimasafa7272 4 жыл бұрын

Thanks Alan

@alanfillingham8848 4 жыл бұрын

Thank you for a very informative video installing a Nest thermostat on a Viesmann 111. May I ask have you installed a Nest onto a Viesmann 100 system boiler with an OSO cylinder?

@tomhilditch3882 4 жыл бұрын

Your better off with a Tado of Vs weather compensation

@superretroquest3348 2 жыл бұрын

Allen thank you very much for the great video, I'm replacing a faulty Heatlink with all the wires from the previous one into a new - I was wondering whether I could tackle this on my own (after disconnecting from the main electricity) and am still unsure, what do you recommend? I feel like google doesn't recommend you to do it on your own just to avoid possible electrical accidents?

@Horizon301. Жыл бұрын

Did you do it yourself?

@smalik695 4 жыл бұрын

Very nice 👍🏼

@nigelsharp9594 2 жыл бұрын

Quick question, where did the live and neutral come from? Mains or mains out from within the boiler? Thanks.

@dickiedubs3137 3 жыл бұрын

Stupid Question but does the viessmann have a live and neutral out to supply the hub. I can see the incoming but where are you getting your power from.

@daniboy0812 Жыл бұрын

So you replace the blue and brown ‘1 & L’ cable with a 5 core. Grey and black going in their place and then just take a feed off the L&N of the boiler itself?

@AlexRocks24-7 4 жыл бұрын

Thank your

@emeczkaa88 2 ай бұрын

Hi Allen, is there any how to manual available on how to efficiently use the nest and radiators, eg what level to set the nest temperature and radiators to heat only selected rooms (e.g. bedrooms during the night or leaving area during the day)

@24-7ttplumbingheating4 4 жыл бұрын

can you do a hive install video?

@dangerman7408 3 жыл бұрын

I have a S plan 2 heating zones and hot water zone using 2 port honeywell valves, with 2 thermostats for heating, and 1 on hot water cylinder. I would like to fit a Nest thermostat on the downstairs heat zone only. I cannot remove any of the installed equipment, so can I override the present thermostat by turning that to minimum, and leave the programmer on constant heating? Any advice welcome.

@iandamianluciferwilson7385 4 жыл бұрын

I may be starting something here but for the money what is the best combi boiler. I know each hvac has a personal preference so it should start a keyboard punch up. Another good vid Allen, thanks.

@pointypipedream 4 жыл бұрын

Baxi ar all round best for quality price and warranty. Simple solid loads in the box. You vant get more boiler.for the same money

@stevenallingham3008 4 жыл бұрын

Great video. What's your opinion on the boiler being mounted on a wood surface

@AllenHart999 4 жыл бұрын

It’s perfectly fine. That’s not an opinion. That’s as per the manufacturers instructions. Thanks

@michaeltrimmer8899 2 жыл бұрын

Does the Nest thermostat when using the separate bracket have to be left plugged into the mains even though the switching signal is wireless ?

@aam77 4 жыл бұрын

Very informative video. However, I think the instructions say that you need to connect the ground wire to the heatlink only when you are using the T1 and T2 terminals to power the thermostat.

@edc1569 3 жыл бұрын

does no harm wiring it, good practice if there's an earth core in the cable you're using.

@firsteerr 4 жыл бұрын

good video Allen , how is Danny getting on ?? has he found a job yet ??

@Haydarah313 3 жыл бұрын

Thanks Allen nice work, I have question. Can you set up Nest to work on /off based on the water temperature and nothing else, for example if the water temp 60 degree or more stay off, otherwise go on until it reaches the desired temperature. to be honest i am looking for a switch to do that Nest or other vendors, smart / or dump switch :), doesn't mater . as long as it will work based on water temperature, not time schedules...etc..

@AllenHart999 3 жыл бұрын

Thanks.

@Clicksystems 4 жыл бұрын

Do you know if anywhere which stocks the USA version of the nest thermostat? Our ones are different and only do heating, American ones do heating and cooling. So anybody with a heat pump that does heating and cooling can’t use a nest.

@danielabbott3291 3 жыл бұрын

What’s better in your opinion hive or nest?

@PAULSMITH1967 3 жыл бұрын

You need to show a hive install for ideal logic plus pre 2016 1000s asking on forums

@avfczoff Жыл бұрын

Would you recommend an electrician or plumber to carry out Nest installation?

@RonaldvanWeerd 2 жыл бұрын

Thanks for the video. At 6" into the video, you are wiring into the № 2 and № 3 connections. But, as the manual for the 100 WB1B says "OpenTherm control compatible", can you not install on the OT1 and OT2 connectors instead?

@jorkirasalas2726 2 жыл бұрын

No! You’d blow the boiler circuit board! OpenTherm protocol uses *low voltage* to modulate the boiler for room heating only. This vid by Allen is showing connection in an S plan system which does not modulate the boiler; it just uses on/off switching of boiler with HW &/or room heating decided by cylinder and room thermostats. For OpenTherm operation the system needs to be changed to an X plan, where the boiler is modulated by OpenTherm room thermostat for heating cycle but that is overridden by the cylinder thermostat when mains voltage switches the boiler for high temperature to heat the cylinder to avoid Legionella dangers (cylinder stat set to 60C).

@Cosyheatingplumbing 4 жыл бұрын

Hi mate Got a job at the moment the customer as a problem with rads not working on the ground floor of her house, I have power flushed the sysem replace the pump with a larger pump, triedto balance out the system the rads are really warm for 3 or 4 days then they go cold again. when they go cold again the flow on the drop is baking hot and the return stone cold. Any thoughts would be appreciated.

@jamiescrimshaw2143 3 жыл бұрын

Hi. I have got a Worcester Bosch green slave oil combi installed. Setup the nest but cannot get them to connect at all. Tried manually connecting still the same h71 error have you had these issues before?

@jorkirasalas2726 2 жыл бұрын

Hi Allen, interesting video! How about doing one for a Viessman 100-w system boiler feeding an unvented cylinder but using an X plan and Nest to attain proper boiler modulation with OpenTherm? Seems like not many installers know how to do this and are just installing the old S plan, which is a great shame considering this boiler has one of the best modulation capabilities and the current drive to reduce carbon emissions and improve boiler efficiency. Viessman seem to push their four-pipe scheme for DHW priority, but that might not be suitable for every install, especially when replacing a boiler in an existing two-pipe system.

@jorkirasalas2726 2 жыл бұрын

X plan was, I think, invented by Intergas to achieve Domestic Hot Water Priority at full heating temperature to avoid Legionella, but with OpenTherm modulation of the room heating for gas efficiency and comfort. Apparently just needs some appropriate wiring changes, a normally open water valve (instead of normally closed with S plan) on the heating circuit switched by a wire feed from the NC DHW valve, and an OpenTherm controller such as Nest 3rd generation. Apparently Tado has stopped doing HW control as nobody was implementing it in UK!!

@davesmith4413 3 жыл бұрын

will it work with a glowworm flexicom15hx

@knightstemplar8379 4 жыл бұрын

Helpful upload, but you could have shown the termination at the boiler end too.

@mitchelladerotoye4343 3 жыл бұрын

Hi Alan. I've watched your videos how to wire the nest thermostat i managed to wire mine to a standard boiler and it works fab. now the mrs wants one at her house but she has a gledhil open vented boiler system. any tips when trying to set this up?

@AllenHart999 3 жыл бұрын

you need to check wiring with multi meter, Personally i would advise you call someone out. Thanks.

@garysunderland9844 2 жыл бұрын

I have a ideal combi boiler with the nest learning stat that’s wired to terminals 2 and 3 for volt free switching in the heatlink but I’m asking anyone who knows if it’s possible to use the 5 and 6 terminals that has the live link to make them 240v and still keep 2 and 3 volt free. It’s just that I’ve added ufh and need switched power for the pump. I haven’t installed a zone valve as I only want one stat. Is this possible without blowing the unit?

@imranmajid1978 4 жыл бұрын

Great video, but why did the client request on/off type connection? I have a valiant combo which has a third party wireless thermostat which can vary the radiator output based upon the temperature requested. Could you please do a video to show how that could be upgraded to a nest.

@AllenHart999 4 жыл бұрын

Imran Majid The person that requested the video asked for that. Thanks

@johnflower8648 4 жыл бұрын

When connecting up nest you don't need to have to have short leads on cable.

@josephclark48 4 жыл бұрын

Hi Alan. Going off the subject a bit, am I right in thinking that you cant do flue gas analysis on a natural draught balanced flue. I am a trainee. Thanks Joe

@pointypipedream 4 жыл бұрын

And most of the age will have asbestos rope seals

@jackhoskins722 4 жыл бұрын

Must be cold in Yorkshire als got the body warmer on🥶🥶🥶

@craigr306 2 жыл бұрын

allen what do you charge for a install rothwell

@SuperWayneyb 4 жыл бұрын

Does the Boiler not have opentherm Bud?

@Lucidchronicles 3 жыл бұрын

Yeah it does

@peterlee6 7 ай бұрын

have you got any contacts that could fit one of these nest thermostats for me in the birmingham area please alan

@plumduff11 3 жыл бұрын

Like the Nest very much, I just wish they make their wire connections better. I find them a little fiddly

@pointypipedream 4 жыл бұрын

The receiver is realy fiddly to wire up. Were told best practice is to wire mains through controls rceiver but the holes are so tight on nest

@danthealien8360 3 жыл бұрын

Thanks for these videos mate. I'm confused, I have the same board in my boiler - but I can't see a mains out? How have you powered the heatlink? Where did you get those permanents from?

@andrewbarker143 2 жыл бұрын

Did you solve it?

@danthealien8360 2 жыл бұрын

@@andrewbarker143 yes mate, are you stuck? I can send you a pic of how I done it if you want, but it was a case of the video just not showing it clearly, but there are terminals on the boiler's board to power the device, it's dead easy. Let me know if you need a hand.

@mrklgnd Жыл бұрын

@@danthealien8360 Hey Dan. Please could you kindly share? I have the same problem.

@danthealien8360 Жыл бұрын

@@mrklgnd there are 2 terminals on the boiler that power the heatlink. Which boiler do you have?

@mrklgnd Жыл бұрын

@@danthealien8360 I have the Viessmann Vitodens 100. From the boiler, I’ve 1-L-N. I have conected the N and L to the Heatlink and bridged N to 2. Should I connect 3 on the Heatlink to 1 on the boiler? Thanks for your help. Really appreciate it!!

@ALG1K 4 жыл бұрын

So the black and grey from the nest go back to where in the veismann ??

@mrklgnd Жыл бұрын

Did you ever get a response to this? I have a similar question. Alain can you please clarify?

@JJ-gf7bc 3 жыл бұрын

Hi Allen I am trying to connect the nest thermostat to a HIU. Trying to replace the existing Honeywell with the heat link. For some reason I can’t get the wires right. Any suggestions pls? Many thanks

@AllenHart999 3 жыл бұрын

No, sorry

@G52able 3 жыл бұрын

yes, you are m8

@rezuk1208 2 жыл бұрын

😍😍😍

@superbikesBMW 2 жыл бұрын

Hi, where to connect L1 and N1 wires?

@Davidgordano 2 жыл бұрын

hi this is useful thank you, but, the tricky part is connecting the heatlink to the boiler, and its not that clear to me exactly how that is done, so i will keep searching... Regards...

@Elonmusk522 2 жыл бұрын

Hi Allen, have you any videos on installing this on an oil boiler? Live in the country side in Ireland and I have an oil boiler and can't find much info on how to install this. Cheers

@AllenHart999 2 жыл бұрын

No I don’t do oil, sorry

@Elonmusk522 2 жыл бұрын

@@AllenHart999 Cheers Allen....would you say that it would be straight forward enough?

@nimjasani6582 3 жыл бұрын

Hi - is it ok to have the thermostat wall mounted and have it directly powered from socket via micro usb? (rather than a common wire)

@AllenHart999 3 жыл бұрын

That should be fine.

@nimjasani6582 3 жыл бұрын

bought a Nest learning, and have been charging via USB for over 6 hours- still not operating. I get the “home” icon when booting up. Any idea how i can resolve?

@keitho77 3 жыл бұрын

Hi Alan. FYI, I was subscribed to your channel but for some reason was unsubscribed. Re-subscribed again obviously ; )

@AllenHart999 3 жыл бұрын

Welcome back!

@Billybobnob Жыл бұрын

Why is the brown wired to 1 and not L, but then goes into L in heatlink?

@Billybobnob Жыл бұрын

This implies on the video your running a live into a neutral which doesn’t sound good. Can you explain?

@wimschoenmakers5463 3 жыл бұрын

If you buy a Nest stand, you don't get the backplate with it, so you must remove it from the wall again. Stupid if you have a fireplace and want to change the place for the Nest from the wall to the stand on a table during wintertime. To get a new backplate for your stand you have to buy a new Nest thermostat.

@nigelfrancis2261 2 жыл бұрын

Jesus that boilers bigger than you Allen !

@rebekahthompson6472 3 жыл бұрын

Have you seen one that constantly says h71 not linking to heat link

@AllenHart999 3 жыл бұрын

Yes, we had to renew it in the end.

@rebekahthompson6472 3 жыл бұрын

Where best place buy them

@SP-yw2tl 2 жыл бұрын

Hi I have a baxi 100he and wondering if you any idea how to wire the nest thermostat e to it?

@AllenHart999 2 жыл бұрын

yes but i would need to do a video

@SP-yw2tl 2 жыл бұрын

@@AllenHart999 would you do that please?

@SP-yw2tl 2 жыл бұрын

It’s actually a main combi boiler 24he

@OrangeyOranges 3 жыл бұрын

how to wiyah ah nist lernin fermostat

@markcroft1303 4 жыл бұрын

What's the best thermostat to use with your phone.

@lemmykilmister450 4 жыл бұрын

They're all pretty good. Hive is the best value for money at the moment. Once you're set up you never use the thermostat, so its aesthetics only.

@markcroft1303 4 жыл бұрын

@@lemmykilmister450 thanks Cam 👍🏻

@tomhilditch3882 4 жыл бұрын

Any of the Opentherm ones Hive is the worst of the bunch unless your boiler cannot take OT, Tado are very clever as is Evo home

@singlapuneet98 9 ай бұрын

Hello Could you help me on video call to install mine ?

@AllenHart999 8 ай бұрын

sorry no

@MJRbooger 2 жыл бұрын

where is brown sleeving?

@AllenHart999 2 жыл бұрын

Thank You

@SayWhaaaaaaaaaaaaaaaaaaaaaaat Жыл бұрын

INSTRUCTIONS IS ALWAYS NOT NEEDED PART OF ANY DEVICE.

@toneskill 4 жыл бұрын

last time I look for 70s porn woman and this came up lol

@dangas6422 4 жыл бұрын

The white is com??what about black is what🤔

@deadpanjack8055 3 жыл бұрын

Switch line

@keithbrueton 4 жыл бұрын

What's your name ?

@michaelwhite28 4 жыл бұрын

Me names alllan aaaart.

@solissac2800 2 жыл бұрын

Doesn’t explain wiring at all

@johnshillings4013 16 күн бұрын

Crap video, one end of the cable you have grey and black into heatlink and the other end you have 2 different flexes 2 brown 2 blues. Show complete wired into the boiler where the grey and back cables go.