clicked on Ratcheting handle link but no luck on Amazon - do want to purchase
@Got2Learn4 жыл бұрын
They stopped making them I believe, sorry for the late reply.
@interesteddiyer3073 жыл бұрын
@@Got2Learn I contacted General Pipe, and YES, they do still make the 1/2" and 3/4 " ratchet handles, but they do not sell direct to consumers. They suggested I buy them from The Cable Center in St. Louis, Missouri. Their number there is 800.257.7209 or 314.993.3099
@Got2Learn3 жыл бұрын
Ohhh, awesomes thanks for the heads up!!
@alexplorer4 күн бұрын
I bought the 1/2" version years ago and loved it. Just got the 3/4" version to remove some old pipe. I can't believe more models don't have the "door" to snap over the pipe. Makes a big difference! I'm very happy with mine.
@eddiezawisha85495 жыл бұрын
I love these cutters Julio. I have the 1/2 Lennox and the 3/4 Autocut. I prefer the Autocut design. Now I know how to change the cutting wheel thanks to your video. Keep the tips coming. Love your channel! Eddie.
@Got2Learn5 жыл бұрын
Thanks Eddie, I really like them too, I wish I had found these earlier in my career :(
@kurtisjames15922 жыл бұрын
I bought a Milwaukee 3 pack with a case 1/2", 3/4", 1". They work well enough for me and I just started plumbing 5 weeks ago. The case also holds extra cutters and a reaming pen. All in all a very awesome product to have available because I can keep my cutters safe and organized in my tool bag.
@Got2Learn2 жыл бұрын
Love those too!!
@charlespannier5389 Жыл бұрын
I have had both, and the Milwaukee are quite aggressive, and even brand new out of the package will crimp pipes as they cut.
@daibhiseaghdha153 Жыл бұрын
the ratchet handles, are simply wonderful, they make things easier to do. in a tight spot.
@Got2Learn Жыл бұрын
Love em!
@zakkmon1235 жыл бұрын
Not bad cutters, but after 30.5 years of cutting cooper pipe. I bought the M12 pipe cutter tool from Milwaukee that thing works great for me. Good video.
@Got2Learn5 жыл бұрын
I'll do a review of those one day, thx buddy ;)
@HeWearsGlasses3 жыл бұрын
Love my AutoCutters, thanks for the recommendation!
@Got2Learn3 жыл бұрын
😉😉😉
@markpinther92965 жыл бұрын
Excellent video. I appreciate the information. Wish I had seen this before a big job in close quarters!
@Got2Learn5 жыл бұрын
Yeah they would of helped a lot, thx buddy!!
@supermansixty9695 жыл бұрын
Been using them for around 20 years LOVE THIS TOOL👍🏻👍🏻👍🏻
@Got2Learn5 жыл бұрын
It's awesome right ?!!
@ejm_demon82635 жыл бұрын
The Auto Cutter's are my Favorite ones to work with, Great video bro 👍
@Got2Learn5 жыл бұрын
Thx EJM, have a great day!
@justinbrison1123 жыл бұрын
Once my Lennox set wears out I'll give these a try but I'm enjoying my m12 Milwaukee coppee cutter
@Got2Learn3 жыл бұрын
The only difference between the Milwaukees and Autocuts is that the Milwaukee's don't have the closing door, so they tend to snag more on stuff, cheers bro!
@rawbacon5 жыл бұрын
Looks good, I like the ratchet feature too. I just hope they use quality plastic and not some junk that cracks apart after a couple years. Then again I'll never be doing enough plumbing in my life again that I'll have to to be buying more tools than I already have so I guess it doesn't really matter to me anyhow.
@Got2Learn5 жыл бұрын
That's a test that only time will tell but it seems solid to the touch. I've read that a lot of people have been using these for a while without any problems if that could help ;)
@CarRepairsMadeSimple2 жыл бұрын
FYI you can get that 3 piece Lenox kit for $47 at Menards.
@thefloridaplumber26315 жыл бұрын
I really like those cutters too. I did not know they had a handle for them. Great video!
@Got2Learn5 жыл бұрын
Now ya know :)
@Viper6-MotoVlogger5 жыл бұрын
Nice, that is indeed a very nice pipe cutter. Nice addition to the tool box 👍
@Got2Learn5 жыл бұрын
They sure are, makes it a lot easier in general to cut copper pipes. It's sad they don't make bigger sizes :(
@johnhargis4566Ай бұрын
I M H O the AutoCut is an excellent choice for the D i y er they're so easy to use & produce excellent results take so little room also relatively inexpensive 😊
@yorkrojas1452 Жыл бұрын
Wow!! Thanks A Million!!!
@LorenzKamo3 жыл бұрын
Only reason I carry the adjustable is for TP pipe since it’s odd sizes
@mlez7197 Жыл бұрын
Sold!!! thank you buddy
@marcostankless75264 жыл бұрын
thank you, yet another great video. I like all your videos.
@Got2Learn4 жыл бұрын
Thank you so much Marco, really appreciated!
@FD-dh2fu Жыл бұрын
Great info as always.
@slofr8dan3 жыл бұрын
I detect a french haccsent tabernac! Very nice video. Tanks. ;)
@Got2Learn3 жыл бұрын
😄😄😄🤷♂️🤷♂️🤷♂️
@shangrilahomestead99307 ай бұрын
Thank you for the helpful information.😊
@Got2Learn7 ай бұрын
🍻
@flaviorodriguez42345 жыл бұрын
Love them cutters been having mine for already six years
@Got2Learn5 жыл бұрын
Good to hear, thx Flavio!
@kingpabst3 жыл бұрын
Thank you for all your useful information
@Got2Learn3 жыл бұрын
My pleasure!
@llremmynightfall92465 жыл бұрын
They are pretty cool. Did you see the Ridgid 2in1 tubing . It does 3/4" and 1/2". Pretty good cutter. It was like $34 but we'll worth it🤘
@Got2Learn5 жыл бұрын
It's cool but like anything else, the more parts, the more problems you might encounter in the long run
@evenflow32565 жыл бұрын
You are really thorough
@Got2Learn5 жыл бұрын
Thanks buddy ;)
@plsreleasethekraken Жыл бұрын
These are great except for not making straight cuts. Not always a big deal for sweating, but having a decent right angle on the cut is valuable for lots of use cases. I've tried 5 of these and not one made a straight flush cut
@Got2Learn Жыл бұрын
Hmmm, never had that issue here, what did you do about it?
@plsreleasethekraken Жыл бұрын
@@Got2Learn stopped using it :)
@Got2Learn Жыл бұрын
@@plsreleasethekraken fair enough!!! 😄
@dannymanzo66132 жыл бұрын
I got the Milwaukee close quarter cutters and I hated them. Not because they were bad but because as an hvac tech we measure our copper pipes by outside diameter where plumbing measures inside diameter. I’ve come to realize all of those close quarter cutters are made for plumbing. I have to stick to the adjustable ones for now sadly
@dustinpomeroy88172 жыл бұрын
So will a 1 inch cut 7/8 and the 1/2 cut 3/8 ?
@faridjahed3 жыл бұрын
Awesome I am getting one of those Thanks
@Got2Learn3 жыл бұрын
Link in description box if you are looking for it.
@renatotesta9025 жыл бұрын
Gotta get one of these! Great vid!
@Got2Learn5 жыл бұрын
;)
@jimwiskus88622 жыл бұрын
Sold me! Thx!!!
@GeotermicaRu5 жыл бұрын
Thank you. Very nice tool.
@Got2Learn5 жыл бұрын
Thx buddy ;)
@GeotermicaRu5 жыл бұрын
Thank you for your cool videos and chanal.
@Got2Learn5 жыл бұрын
My pleasure, have a great day ;)
@splaterpowm3 жыл бұрын
Hi can you make a video about hot water return line please
@ratchriat17165 жыл бұрын
love them great review enjoyed the video
@Got2Learn5 жыл бұрын
Thx buddy, I love them too ;)
@daibhiseaghdha153 Жыл бұрын
when I am replacing the self tapping screws, I turn them anti clockwise, gently and hear or feel a click, then I turn the screw in, so that it picks up on the original internal thread
@jakedaonlinegaffertutorial76194 жыл бұрын
I really need this
@ScubaCat35 жыл бұрын
Great video! The cheaper version (without the door) is $6.99 at harbor freight! 😁 Also, you said "pop in the shaft". I think I know who you were referring to there...🤣🤣
@Got2Learn5 жыл бұрын
Lollllllll spoder
@arturgukasi87305 жыл бұрын
Great video! Great information for people
@Got2Learn5 жыл бұрын
Thx A.G.G, appreciate your comment ;)
@arturgukasi87305 жыл бұрын
@@Got2Learn no problem man thanks for the follow on Instagram!!
@Got2Learn5 жыл бұрын
My pleasure buddy ;)
@lightcapmath27772 жыл бұрын
YOU ROCK!!!! DVD:)
@MarcVette5 жыл бұрын
I have three of the Autocuts in my toolbox. 1/2", 3/4" and 1". They are great for all tube cutting, not just close quarter. But, those are my back-ups. The tube cutter I use most is the Milwaukee M12 copper tube cutter. Cuts copper pipe up to 1" in about 6 seconds. I picked up a refurbished one a couple of years ago. It cost me 50 bucks for just the tool only. It takes a little time to get used to centering the tube within the rotating cutting assembly, but once you got that down, you 'll wonder why you ever cut tubes manually. Have you used one, Julio? Just curious. Anyway, everyone should have the Autocuts in their plumbing toolbox. Excellent tool!
@Got2Learn5 жыл бұрын
Ya, I tried it a couple of times...it's freakin' noisy but it's darn quick though!!
@travisk55894 жыл бұрын
Lol, I have called rigid and talked to the designers about making oval knobs on their small tubing cutter. I cant believe that they haven't changed the design.
@Got2Learn4 жыл бұрын
It's a poor design, no idea why they do it like that.
@richarddalmau52955 жыл бұрын
I bought one of 1/2 cutter for 3.00 Dollars in Florida USA.
@Got2Learn5 жыл бұрын
Dead cheap and they are good.
@amirhussain14495 жыл бұрын
Thanks
@Got2Learn5 жыл бұрын
You are welcome buddy!!
@j.v.6235 жыл бұрын
Good stuff
@Got2Learn5 жыл бұрын
My pleasure man, glad you liked it, don't forget to subscribe and share, it helps a lot :)
@danielhako14 жыл бұрын
why don´t you use the Milwaukee® M12™ Copper Tubing Cutter instead
@Got2Learn4 жыл бұрын
Still old school ;)
@teufelshunde7303 жыл бұрын
I can never seem to get the pin out to change the blade so I have about 20 of these , I have gotten to where I just consider them a consumable on the job. Also the leave a ridge on the outside of the pipe which eats up time on the job using a file to remove, and these cutters where only used on a small job once before the job I just did. just purchased the Milwaukee ones, and they do not leave a ridge but they take a little getting used to. any tips on the ridge problem, like I said I don't think the blades have much use on them to be the problem.
@Got2Learn3 жыл бұрын
The ridge problem I just deal wirh it, no escaping it with the autocuts.
@MrTooTechnical5 жыл бұрын
hey knipex man. nice vid. and nice knipex pliers wrench in your tool box. all u need now is a fluke 85 and u r golden.
@Got2Learn5 жыл бұрын
;)
@sroberds6403 жыл бұрын
Only problem I have with the auto cut is that it won't cut all the way through soft copper, my cheap Harbor Freight cutter cuts all the way through soft copper.
@leusemia6959 Жыл бұрын
Hi, I’ve seen people cutting PEX with that general pipe cleaner cutter, is it good is it bad? It gives straight cut but not sure if it is good to use it for that 😅
@rudolfoization5 жыл бұрын
what r the disadvantages of cutting with a grinder with metal disc ?. once you cut it, debur, clean it ...does it make any difference ? i am talking 1/2 or 3/4 copper pipe. yes you could cut at slight angle by mistake ..but the pipe is 1/2" into fitting anyways once soldered. thoughts ?
@juliussalcido70655 жыл бұрын
Pablo the reason is because it’s dumb
@pasqualeparente97765 жыл бұрын
My thoughts are that in close and closed quarters, if the grinder cutting disc pinches and breaks it can and will do damage besides hurting you or even killing you. When using a grinder you should always have the guard installed and stand on the furthest side of the spinning disc. This is not possible under a sink or many other situations. This is my opinion, you do what you want , but remember if something serious happens to you, it is your family you are leaving behind. Check out some videos of grinder accidents, I believe you will use your grinder less often.
@MarcVette5 жыл бұрын
@Pablo - Several reasons - 1) A jagged cut edge makes it harder for the tube to slip into a fitting. You'd have to do more work sanding, filing etc just to get to the edge a tube cutter gives you. 2) An angled cut creates a weak point when seated into a fitting. Yes, even though it is a half inch into the fitting, the seal relies on that perfect edge from a tube cutter setting at the stop of the fitting. And, if that isn't enough - 3) Microdust will be generated when using cutoff wheels on metals. It won't just flush out when the water is turned on. Like mini metal shavings, those copper dust particles would linger on rubber surfaces. Playing hell on the rubber washers and seats as they rub against each other when opening and closing. Not to mention clogging the faucet aerators.
@pasqualeparente97765 жыл бұрын
@@MarcVette I agree with all your points BUT not every worker cares about the quality of the work they do. This is why I decided to point out the danger versus working properly and working like a slob.
@daibhiseaghdha1532 жыл бұрын
is the 1/2" copper tube pipe 1/2" on the outside diameter, or 1/2" on the inside diameter on the copper tube, where I am it is named 15mm copper tube / pipe which is the outside diameter, with a wall thickness of 0.7mm, inside diameter 13.6mm for half hard temper.copper tube. we have an equivalent tube cutter, but when I used it, it dented the wall of the copper tube a bit, which I did not like, this was years ago, so may have been improved ? I was using imperial size copper tubse, when I first started plumbing, it was a heavier gauge then. General RH12 1/2" Autocut Ratchet Handle, General RH34 3/4" Autocut Ratchet Handle General ATC12 1/2" Autocut Tubing Cutter General Wire Spring ATC34 3/4-Inch AutoCut Pipe Tubing Cutter General ATC1 1" Autocut Tubing Cutter are good., if you have enough space between the tube, and the wall, it's a shame they don't make the pipe clips longer, and life would be easier, and more functional. your videos, are great, well worth watching, thanks.
@robertstallan38382 жыл бұрын
For the sizing, do they cut 1/2 inch outer diameter pipe or internal diameter etc? Would be interested in using them in Australia
@Got2Learn2 жыл бұрын
Should be able to do both as they are spring loaded but I am not 100% sure, here's the Amazon US link: amzn.to/3zFiaiM
@joevela6803 Жыл бұрын
This is probably a stupid question but I would rather be safe than sorry. Can this be used on pvc pipe?
@Got2Learn Жыл бұрын
I think the blade isn't long enough to go through seeing its a lot thicker than copper...j
@oly44904 жыл бұрын
Do they still sell the "General Pipe Ratchet Handles"? Couldn't find them. thanks
@Got2Learn4 жыл бұрын
Yeah, General Pipe Cleaners are having problems restocking their distributors, maybe we will see them one day soon! :(
@DJ_Driven4 жыл бұрын
Unfortunately the ratcheting handle looks like it's no longer available on Amazon.
@Got2Learn4 жыл бұрын
Yes, I think they stopped making it, sucks.
@johntran91312 жыл бұрын
Great video! Where do buy the ratchet handle? Do you have a link for it as well?
@Got2Learn2 жыл бұрын
Thanks, they don't sell em anymore 🤦♂️
@ofiasdfnosdf2 жыл бұрын
KZfaq shows that you replied, but there's nothing there. Can you please provide the link again? Thanks
@patstenzel5 жыл бұрын
AutoCut ratchet handle in the video is different than the one offered now
@Got2Learn5 жыл бұрын
The one offered on Amazon you mean?
@brandonthompson98663 жыл бұрын
I bought a 3/4 autocutter but it is deforming the copper to where I can't cut it completely ;_; the diameter looks like a triangle on one side but the other side only experienced a little deformity. Whyyyyyyyyyyyyyy
@Got2Learn3 жыл бұрын
What kind of copper are you cutting?
@brandonthompson98663 жыл бұрын
@@Got2Learn I've never dealt with plumbing that much. I assume it's soft copper. It's the service line that goes to the house. I have a piece of it that curved to the right and then curved up into the crawl space.
@Got2Learn3 жыл бұрын
@@brandonthompson9866 yeah I don't recommend using these on soft copper because they put a lot more pressure on the pipe than adjustable cutters, try it on some hard copper, it works like a charm.
@timcc0014 жыл бұрын
I find that these cutters make a small dent in the end of the pipe.
@Got2Learn4 жыл бұрын
put a new blade in ;)
@techmap41914 жыл бұрын
I have a 1 inch pipe to cut. Do they have in 1 inch??
@Got2Learn4 жыл бұрын
They sure do, and plus, it's all metal :) Here's the affiliate link: amzn.to/2LWkQz3
@GodAlwaysWins Жыл бұрын
How do you align the autocut to the cut mark?
@Got2Learn Жыл бұрын
With the center of the cutter ;)
@GodAlwaysWins Жыл бұрын
@@Got2Learn thank you. I didn't know if there was an indicator or something as I never used one.
@Got2Learn Жыл бұрын
@@GodAlwaysWins some have an indicator but i'm guessing they cost more.
@michaelcrupi44863 жыл бұрын
where do i buy a ratchet wrench for the 1/2" auto cut ?
@Got2Learn3 жыл бұрын
They used to sell them on amazon but they stopped, I dunno where they sell tyem now, might wanna contact them.
@AnonyMous-be1xn4 жыл бұрын
Do these cutters work on EMT pipes?
@Got2Learn4 жыл бұрын
Probably!
@RuneSwagga5 жыл бұрын
Are they plastic? I know the Lennox are metal and seriously tough. I'm hesitant buying any plastic tools
@Got2Learn5 жыл бұрын
Yes, the 1/2" and 3/4" are plastic. If you are the type to "throw" your cast iron pipe wrenches in your tool box, you might wanna get something made of metal ;)
@alexstoles13395 жыл бұрын
Ive dropped my autocuts from 20 feet in the air off a high reach man lift and they still work great and nothing broken. Just make sure u keep them oiled just like any cutter they can get rusty inside and wheel can lock up
Un placement pour un tel produit comme mentionné au début de ton vidéo... Je niaisais, j’aime ton Channel beaucoup, merci pour toutes les infos!!! Thanks for all the info and yes I’m going to get one for my work, thanks again.
@Got2Learn5 жыл бұрын
Ahhhhh scuse j'avait pas compris! Non c'est pas une plug du tout, juste mon opinion personel ;) merci Evan!!!
@imwatching29015 жыл бұрын
:)
@Got2Learn5 жыл бұрын
:)
@starrtile8495 жыл бұрын
The newer open cutters are best, one in the thumbnail sucks
@Got2Learn5 жыл бұрын
I prefer the closed ones.
@OnerousEthic3 жыл бұрын
This video sounds like propaganda after finding one major weakness: it is more likely to spiral than shear. Of course this happened at the most stressful moment possible: in a tight spot, the first time I tried to use it. Beware of videos that are long on praise and short on critical analysis.
@Got2Learn3 жыл бұрын
You're cutter is making spirals??
@galvanargold46572 жыл бұрын
Haha the "best" cutter... You compare the crapiest cutters you own with this piece of shit? That tool will say goodbye in notime.
@sleektoneofficial Жыл бұрын
Only thing i hate about them cutters is the giant fucking burra they leave