Avoid tear out, learn how to identify grain direction in wood.
Пікірлер: 100
@chrismoore63593 күн бұрын
What to reiterate that this is-by far-the most informative and understandable video on wood grain. Thank you and well done!!!
@kuffyswoodworktipsandtalk2 күн бұрын
Thank you very much. 😊
@mimibecks70492 жыл бұрын
Hello, Thank you very much for this precise and informative video on how to determine the grain direction. This is the first video that clearly explains how to determine which grain is on top of next grain. I watched many other videos and none if them explained it as good as this video. I am very grateful to you for explaining grain direction which is very important to understand. I will always reference this video. I am now a subscriber and look forward to watching other videos from your channel. Thank you so much, AJ
@kuffyswoodworktipsandtalk2 жыл бұрын
Thanks very much. I'm glad this video was a help for you.
@MachinedInWood9 ай бұрын
This is the best explanation of all of this that I’ve seen. Great job!
@kuffyswoodworktipsandtalk9 ай бұрын
Thank you very much 😊
@Malba177610 ай бұрын
Thanx for taking the time to make this video, one of the best grain examples I've watched so far !!!!
@kuffyswoodworktipsandtalk10 ай бұрын
Thank you very much.
@ForestDogwoodworks Жыл бұрын
The most thorough and best explanation of wood grain direction I have ever seen ,Great job no wasting time or filler straight to the point and informative
@kuffyswoodworktipsandtalk Жыл бұрын
Thank you. I think I did waffle on a bit, given that the video ended up being 25 minutes long. All in all though, it's been a very widely accepted video about grain direction.
@Kurt9099 Жыл бұрын
This might be the best explantion of grain direction I've seen! Thank you!
@kuffyswoodworktipsandtalk Жыл бұрын
Thanks mate.
@makenchips7 ай бұрын
Finally, someone that could explain this with precision. Thank you for this find video! Columbus Michigan
@kuffyswoodworktipsandtalk7 ай бұрын
You're very welcome. Thanks for watching 👀
@RobinLewisMakes3 жыл бұрын
That bit about the pith and bark was gold! Learnt a while ago, by trial and error, to flip the board end over end when doing faces in the thicknesser. But I'd never known WHY that worked. Awesome video mate, please keep these coming!
@kuffyswoodworktipsandtalk3 жыл бұрын
I like the whys, they keep things interesting while also making the future much much easier.
@FixitFingers3 жыл бұрын
Awesome Kuffy, liking the concept of this channel. A lot of those tips I remember from various of your builds but having them logically and more fully explained in one video is a super reference. Cheers!
@kuffyswoodworktipsandtalk3 жыл бұрын
Yeah, I reckon this will be a good resource in time. It's a lot easier to explain a single detail over a few minutes or 25!, instead of just saying "ya gotta cut with the grain" and then start up the router 😂
@danielsolheim3296 Жыл бұрын
Best explanation i've come across. Thank you for the video :)
@kuffyswoodworktipsandtalk Жыл бұрын
Thanks mate, I'm glad it helped.
@marcdecarufel62623 жыл бұрын
Best explanation I have ever seen/watched...Well done and thank you!
@kuffyswoodworktipsandtalk3 жыл бұрын
Thanks very much, thanks for watching 👍
@Vanderloo52 жыл бұрын
Amazingly helpful!
@kuffyswoodworktipsandtalk2 жыл бұрын
I'm glad it was beneficial for you. Thanks
@matthewphillips17283 жыл бұрын
Kuffy, That was excellent really informative with out being overly boring,or dragging a point, You have really polished up on these clips, I’m hanging out for the next one Absolutely Top Stuff 👍👍👍👍👍
@kuffyswoodworktipsandtalk3 жыл бұрын
Thanks Matt. This channel should be a good spot to put videos which probably wouldn't even be made through fear of having a negative affect on a channels view metrics. We'll see how it goes.
@tokolosh64672 жыл бұрын
Best explanation I've seen, thank you.
@kuffyswoodworktipsandtalk2 жыл бұрын
Thanks very much. I'm glad it made sense 👍
@CornelionSigismon8 ай бұрын
You make perfect sense, thank you
@kuffyswoodworktipsandtalk8 ай бұрын
Thanks!
@peterhague56263 жыл бұрын
Brilliant video. I've watched quite a few trying to get a better understanding of reading grain. Very few have been as clear and helpful as this one, thank you! Also, I think this is the only one that says "crap your daks" which is also a bonus
@kuffyswoodworktipsandtalk3 жыл бұрын
Thanks Peter, I'm glad it helped. It's often a really lucky day when we crap our daks while working with timber. It's an unlucky day when we didn't have time to crap em!
@marshallgeller80256 ай бұрын
The paper analogy really helped to explain this complex and difficult subject. Thank you so much for this. I think you should call yourself “The Grain Detective “ 🕵️
@kuffyswoodworktipsandtalk6 ай бұрын
The grain detective certainly wouldn't be the worst thing I've called myself 🤣
@BastieSimbeck3 жыл бұрын
Very well explained! Thank you so much, helped a lot!!
@kuffyswoodworktipsandtalk3 жыл бұрын
Happy to be of help 👍
@dscritter6142 жыл бұрын
Absolutely excellent!
@kuffyswoodworktipsandtalk2 жыл бұрын
Thanks!
@lightbulb682 жыл бұрын
Hi, Thank you very much for the explanation and the demonstration. You made it more clear to me than any other woodworker that tried to explain that before you. Thank you and wish you all the health and the best in the world.
@kuffyswoodworktipsandtalk2 жыл бұрын
Thanks. I'm glad you found the video useful 👍
@grahamparsons66203 жыл бұрын
Great video mate, very informative, never thought about using an old T-shirt/rag to find grain direction, always learning something looking forward to next instalment whatever that may be 👌👌👌👍👍👍
@kuffyswoodworktipsandtalk3 жыл бұрын
I generally use the t-shirt I am wearing at the time. It tears them to shreds, and you end up with the odd belly splinter, but it's right there ready to go :D
@davidlouk84094 ай бұрын
Extremely informative. Lots of important and useful info in this video. Thank you so much for this.
@kuffyswoodworktipsandtalk4 ай бұрын
Thanks 😊
@albertotenorio67543 жыл бұрын
Great video, I learned a lot from this Thank you very much!
@kuffyswoodworktipsandtalk3 жыл бұрын
Glad it was helpful!👍
@whitedoggarage3 жыл бұрын
Great video Kuffy thankyou. I learnt a lot and I recon you have a great way of explaining things.
@kuffyswoodworktipsandtalk3 жыл бұрын
Thanks mate. I'm glad it was understandable
@whitedoggarage3 жыл бұрын
@@kuffyswoodworktipsandtalk I struggled in the beginning with the lay of the cathedrals, but the sheets of paper demonstration sorted that out. Your Tassie Oak bit was quite relevant as I find it hard to read at times. I usually do a light plane and it is either smooth or rough and I make my call on grain direction from that 😐
@kuffyswoodworktipsandtalk3 жыл бұрын
Sometimes with quartersawn material, I take a swipe with a plane and it is pretty smooth and felt OK while planing. But when holding it up against the light, I can see that the surface is slightly dull. Can be a tricky beast to master, one day I'll get there
@drmkiwi3 жыл бұрын
Good stuff, thanks Kuffy. All the best with your new channel. (Rob Tee sent me). Cheers, David
@kuffyswoodworktipsandtalk3 жыл бұрын
Thanks for coming along David
@dilex28705 ай бұрын
Good work, thank you very very much ❤
@kuffyswoodworktipsandtalk5 ай бұрын
You're welcome 😊
@jasonlewis36203 жыл бұрын
Thank you!!
@kuffyswoodworktipsandtalk3 жыл бұрын
No worries ☺️
@IsaKocoglu3 жыл бұрын
Channel looks promising! Liked your video and subscribed
@kuffyswoodworktipsandtalk3 жыл бұрын
Thanks!
@billofalltrades14683 жыл бұрын
Nice explanation, I never knew that about the grain.
@kuffyswoodworktipsandtalk3 жыл бұрын
Cheers Bill. It's very important to cut with the grain. Having a work piece disintegrate in your hands because you were cutting against the grain is quite frightening the first few times it happens (yeah, it's happened to me many many times) 😂
@clifffff7630 Жыл бұрын
I used to see the grain patterns as cave entrances... But cathedrals work too! 👌
@kuffyswoodworktipsandtalk Жыл бұрын
I've never heard them described as cave entrances, I like it!
@MixingGBP3 жыл бұрын
I am only 8 minutes in and you've answered a question I've had for years.
@kuffyswoodworktipsandtalk3 жыл бұрын
Awesome! I'm glad it was helpful
@bernardzhang18863 жыл бұрын
great video!! liked the 'looking at the straw cut out on quatersawn boards. For ironbark i just run my hands up and down the piece of timber until i get a splinter. And then plane the opposite direction to that
@kuffyswoodworktipsandtalk3 жыл бұрын
Ouch, I'm not a fan of splinters. I tend to only get them in the webbing between thumb and index finger!
@bernardzhang18863 жыл бұрын
@@kuffyswoodworktipsandtalk damn. I only seem to get them in my right hand. Its to train my left hand to be more useful haha
@kuffyswoodworktipsandtalk3 жыл бұрын
Lol, my left hand is pretty useless too
@GaffLife6 ай бұрын
Excellent explanation, thank you! I bet you can teach us on grain direction in regards to strength and movement when the wood works due to moisture content. 😉😁👍💪
@kuffyswoodworktipsandtalk6 ай бұрын
I could do a video on wood movement due to moisture changes. I can also make a video discussing the differences in compression and tensile strength between end grain, short grain and long grain. Thanks for the ideas.
@GaffLife6 ай бұрын
@@kuffyswoodworktipsandtalk That would be fantastic! It's difficult to find good information on these topics, especially on strenght vs grain direction, as in which way is a piece of wood the strongest... Or which direction does wood move, a quarter sawn board vs a slab sawn (if i got the term right). Thanks!!
@SusanMontooth3 жыл бұрын
SURELY I am one of the non-technical viewers who doesn't belong here. But it's a well-done lesson anyway. In fact, you are such a good teacher that I actually understand this thing now.
@kuffyswoodworktipsandtalk3 жыл бұрын
You belong here too. It's a good lesson for other things also, most notably, shaving. If I shave from chin up to ear, I am shaving against the grain and I can actually feel my dull rusty razor pulling the hairs out of my face. If I shave from ear to chin, happy days. It makes me wonder why girls often shave their legs from foot to knee, instead of knee to foot. I've never shaved my legs, perhaps it is easier to do it this way?
@SusanMontooth3 жыл бұрын
Heh, I composed a reply but forgot to actually post it! So, shaving. It would be physically challenging to shave knee-to-foot. The angle that you hold the razor is wrong. I suppose I'd have to get a minion to do it for me while I reclined in the jacuzzi eating chocolates or sipping champagne or something =)
@kuffyswoodworktipsandtalk3 жыл бұрын
Lol. I'm quite sure there are places where you can recline in the jacuzzi while chomping down choccys as someone shaves your legs for you :D
@samoanSAIYAN3 жыл бұрын
Nice... Sup mate! Subbed!
@kuffyswoodworktipsandtalk3 жыл бұрын
Hey hey! Thanks mate
@johnadamski40123 ай бұрын
🌲🍀🐾🔨great, accurate information😉📐🐾🍀🌲.
@kuffyswoodworktipsandtalk3 ай бұрын
Thanks 😊
@theren8311 Жыл бұрын
Inside the box you follow the rules, outside the box you go against the rules.
@kuffyswoodworktipsandtalk Жыл бұрын
Perfect 👌
@jasongullickson88583 жыл бұрын
About time you spelt it out to us! Next- how to use gloves effectively in a workshop. 😘🤣🤣
@kuffyswoodworktipsandtalk3 жыл бұрын
Hehe. Gloves are great, they add so much more grip which aids control, but technically they add a bit of risk to the work as well so I get in trouble when using them around rotary machinery 🤣
@DownUnderWoodWorks3 жыл бұрын
Jason Gullickson Absolute necessity when working with old reclaimed Aussie hardwood. Splinters like needles, ouch!!
@kuffyswoodworktipsandtalk3 жыл бұрын
I like the splinters that dig in deeply and then break off a mile under the skin. Those are my favourite...NOT!
@jasongullickson88583 жыл бұрын
@@DownUnderWoodWorks or crawling around the roof space... damn you oregan
@adirondackdeluxe17492 жыл бұрын
Great lesson!!! Thank you so much! I like your videos a lot!!! Listen to Kuffy and you won't crap your daks!)
@kuffyswoodworktipsandtalk2 жыл бұрын
If you're ever gonna crap your daks, make sure to do it at the END of the work day.
@riverbuilder22513 жыл бұрын
Time to get some printed t-shirts and corporate uniforms 😆
@kuffyswoodworktipsandtalk3 жыл бұрын
LOL, the corporate uniform is hi-vis yellow shirt, any colour shorts and steel capped boots. Jocks and socks optional but recommended :D
@watashiwanachodes3 жыл бұрын
Very clear explanation i got everything down great. But the end with the humpy edge i didnt quite understood how you figured it had four segments with different directions of the grain. Can someone explain??
@kuffyswoodworktipsandtalk3 жыл бұрын
Let's see if I can do with text graphics. Say you have different lengths of paper and you stack the longest on the bottom, gradually building up with shorter and shorter sheets of paper. It would look something like this (I hope...) __________ _______________ ______________________ If you ran you fingernail from the top sheet down to the bottom sheets, in either direction, your finger will slide down nice and easily without "tearing out". However, if you start at the bottom and move up, you fingers will get stuck under the sheet above and tear it upwards. I hope this helps.
@watashiwanachodes3 жыл бұрын
@@kuffyswoodworktipsandtalk oh, that is just crystal clear. Thanks so much!!!
@IceCat14310 ай бұрын
Why aren’t you making videos anymore? Very informative content.
@kuffyswoodworktipsandtalk10 ай бұрын
Thanks. Technically I am still making videos, I am just very very lazy. I have a backlog of videos which require editing, and I am slowly working through that.
@IceCat14310 ай бұрын
That’s great. Hope to see more videos soon!
@TakamiWoodshop3 жыл бұрын
Hoooo, that was güüd. I thought I knew it all with that t shirt trick which you told me a couple of years ago. Of course they never tell you the full story.. #eyeroll this all might go a long way in explaining why my wife doesn't like me sometimes... I'm rubbing her in the wrong direction and getting my fingernails caught between her many layers #bigeyeroll
@kuffyswoodworktipsandtalk3 жыл бұрын
Lol, maybe ask a friend to rub your wife properly to see if there is any difference in reaction :D
@harmoniousembodiment72032 жыл бұрын
Confusing. WHY to go against the grain cathedral direction on one side but with the grain andcathedral direction on the other side? Its not clear why? Doesnt make sense as going aginst the cathedral direction would tear it it seems
@kuffyswoodworktipsandtalk2 жыл бұрын
I don't think I can explain any better than I did in this video. My suggestion would be to test it yourself and plane a board with the cathedrals on both sides of the board. One side will plane cleanly, while the other side will tear out.