I mean, if you’re spending hundreds making a router table, and you don’t have the first clue how it works, you deserve everything you get.
@kuffyswoodworktipsandtalk6 күн бұрын
A lot of people buy a ready to go router table, just like they buy their bandsaws or table saws. It's not uncommon that they don't know how these machines work before buying, and the simplest thing like feed direction catches them out easily.
@henrychu470117 күн бұрын
Thanks for this video, safety tips are well apreciated. Because I was entertaining the idea of buying a router table for my future projects, I've seen dozens of videos on KZfaq about router tables. In all the examples, nobody was wearing any gloves for protection for their hands. Thick gloves would have prevented some accidents that some woodworkers have experienced. Safety first.
@kuffyswoodworktipsandtalk16 күн бұрын
Actually, it is quite the opposite. Gloves increase the probability of a serious accident occurring when operating rotary equipment such as a router table. The problem is the rotation of the bit actually grabs onto the glove and pulls more of your hand into the bit. I personally use gloves to increase my grip, but I do so knowing that I am elevating my risk profile.
@henrychu470110 күн бұрын
@@kuffyswoodworktipsandtalk Thank you, when I get my router table, soon, I'll experiment to see which is the better-safer method.
@ericssclarke24 күн бұрын
This video showing all the scenarios helped me lock in the why of “no wood between bit and fence” I learned in furniture making class.
@kuffyswoodworktipsandtalk23 күн бұрын
It seems so safe and effective to have the timber between the fence and the bit...until the board goes flying across the room! 🤣
@chrismoore635924 күн бұрын
What to reiterate that this is-by far-the most informative and understandable video on wood grain. Thank you and well done!!!
@kuffyswoodworktipsandtalk23 күн бұрын
Thank you very much. 😊
@erlindahugo43529 күн бұрын
thank you thank you thank you so much for this explanation ❤❤!!!
@kuffyswoodworktipsandtalk29 күн бұрын
You're welcome. Thanks for watching.
@toddphelps5030Ай бұрын
Great video mate, thank you!
@kuffyswoodworktipsandtalkАй бұрын
Thanks for tuning in.
@casperscuts2627Ай бұрын
Great job, I just love your sliding table saw. I can only wish!
@kuffyswoodworktipsandtalkАй бұрын
Thanks mate. I don't know what I'd do without my saw.
@WoodenWaresHandworkАй бұрын
Why are you wearing gloves?
@kuffyswoodworktipsandtalkАй бұрын
Although it increases my risk around rotary equipment, I wear gloves because they give me extra grip, and that saves some pain my wrists.
@robthompson8285Ай бұрын
Great router safety video! Don't see enough of these. 😊
@manuelpereira13562 ай бұрын
I´m a qualified tool maker, now retired and with a lot of time at hand. So, I decided to start working with wood for the first time, and occupy my free time. So, just got my first router table. Your video is EXCELLENT and was extremely helpful for a beginner like myself, so thank you!
@distortedodin2 ай бұрын
Wow! Thanks for this. Well done demonstration.
@kuffyswoodworktipsandtalk2 ай бұрын
Thanks
@breannestahlman59533 ай бұрын
Vrey good video, Thank You!
@kuffyswoodworktipsandtalk3 ай бұрын
I'm glad you liked it. Thanks for watching.
@MarcusRefusius3 ай бұрын
Hello from Sequoia National Park USA. Oh the Irony that it never occurred to you to create a Wooden Dead Blow Hammer. Enjoyable Video though! Cheers.
@kuffyswoodworktipsandtalk3 ай бұрын
I preferto use my plastic deadblow hammer because I often use it during glue ups. It's easier to clean the glue off.
@MarcusRefusius3 ай бұрын
@@kuffyswoodworktipsandtalk Fair Dincum then. You do employ a LOT of glue.
@johnadamski40123 ай бұрын
🌲🍀🐾🔨great, accurate information😉📐🐾🍀🌲.
@kuffyswoodworktipsandtalk3 ай бұрын
Thanks 😊
@sfs1707473 ай бұрын
What a poor explanation at the beginning of this video as to how to fit a cutter into a collet. He does get it in correctly but there is no way a collet will pull the cutter downwards into the machine. The reason an air gap is left between the end of the cutter and the base of the collet is to protect the main bearing from heat. A router bit gets extremely hot in use and if the cutter is bottomed out in the collet that heat is transferred into the main bearing of your machine. Do that often enough and there is a good chance you will burn out your machine as the bearing begins to fail.
@kuffyswoodworktipsandtalk3 ай бұрын
When you tighten the nut, it presses the collet further into the collet housing, dragging the bit with it. It's possible to bottom out the bit.
@luminousfractal4203 ай бұрын
@@kuffyswoodworktipsandtalk can verify
@twelthstring4 ай бұрын
So, inserting the wood from right to left makes a featherboard completely useless. Right? How about a featherboard on top of the wood?
@kuffyswoodworktipsandtalk4 ай бұрын
Great question. A featherboard provides consistent pressure towards the fence, or down onto the table. Consistent pressure results in a cleaner cut. It also allows fingers to be kept well away from the cutter if you're nervous about that stuff.
@davidlouk84094 ай бұрын
Extremely informative. Lots of important and useful info in this video. Thank you so much for this.
@kuffyswoodworktipsandtalk4 ай бұрын
Thanks 😊
@blackrichard10295 ай бұрын
Nicely done! (Although "thicknesser" confused me for a moment. :) )
@kuffyswoodworktipsandtalk5 ай бұрын
Haha, that's what I've always called it, because it brings the boards down to thickness....by planing them 😄
11:01- I literally jumped! Great video, thank you 🙏
@kuffyswoodworktipsandtalk6 ай бұрын
Haha, it's gone in a flash. At least it's not our fingers.
@terrydanks6 ай бұрын
Very helpful!
@kuffyswoodworktipsandtalk6 ай бұрын
You're welcome. Thanks for watching.
@MAGAMAN6 ай бұрын
I was doing some routing on my table the other day and was having all kinds of weird problems. After stopping and examining things I realized that I was going the wrong direction on the table. What happened was I used the feather board that was on my table saw and it has an arrow in it and it was pointing the wrong way for my router. I had to take the feather board apart and flip the part with the "feathers" over and the arrow now pointed the right way. I had been doing some routing earlier without a fence, so I was going in the same direction, but the wood was on the other side of the bit. I will definitely be thinking a little more about what direction I should be going in the future. I will also be getting feather boards that will only be used on my router.
@kuffyswoodworktipsandtalk6 ай бұрын
That's a common problem you had. It's exactly why I speak about feeding the timber in opposition to the rotation of the router bit. I don't speak of following arrows on jigs and fixtures because they are not always correct.
@lornaj33106 ай бұрын
THIS VIDEO IS GREAT. I've been following the direction of feed printed on the table - unconditionally. And I've been assuming that the solution to its murdrous tendencies has been more fences, more pressure, from more angles, MORE CONTROL... It's been driving my blood pressure through the roof becauae I'm always moving at a snails pace waiting for it to explode. DO RABBETS AND TENONS NEXT!! How do I keep those from getting spit out on the tail end when the bit finally breaks through the back of the piece?
@kuffyswoodworktipsandtalk6 ай бұрын
Ah ok. I can demonstrate how to prevent the timber from splitting out as the cut finishes. The answer is to have a waste piece behind your board so the fibers are supported.
@davedaniels82117 ай бұрын
Your thicknesser / router demo was spot on . I was told never to do it for obvious reasons . Never done it or seen it happen . Excellent reminder behind the theory .
@kuffyswoodworktipsandtalk7 ай бұрын
At trade school, we learn the theory. Then, the teacher always showed us why 😁
@Mr_Chuckles7 ай бұрын
Excellent advice, thanks!
@kuffyswoodworktipsandtalk7 ай бұрын
You're welcome 😊
@GaffLife7 ай бұрын
Excellent explanation, thank you! I bet you can teach us on grain direction in regards to strength and movement when the wood works due to moisture content. 😉😁👍💪
@kuffyswoodworktipsandtalk7 ай бұрын
I could do a video on wood movement due to moisture changes. I can also make a video discussing the differences in compression and tensile strength between end grain, short grain and long grain. Thanks for the ideas.
@GaffLife7 ай бұрын
@@kuffyswoodworktipsandtalk That would be fantastic! It's difficult to find good information on these topics, especially on strenght vs grain direction, as in which way is a piece of wood the strongest... Or which direction does wood move, a quarter sawn board vs a slab sawn (if i got the term right). Thanks!!
@JamesArthurRyall7 ай бұрын
Very very good explanation of what not to do and why. Thank You.
@kuffyswoodworktipsandtalk7 ай бұрын
Thanks 😊
@marshallgeller80257 ай бұрын
The paper analogy really helped to explain this complex and difficult subject. Thank you so much for this. I think you should call yourself “The Grain Detective “ 🕵️
@kuffyswoodworktipsandtalk7 ай бұрын
The grain detective certainly wouldn't be the worst thing I've called myself 🤣
@floridaexperience40887 ай бұрын
Okay, now im terrified to use my new router table
@kuffyswoodworktipsandtalk7 ай бұрын
Knowledge is power, we only fear what we do not know or understand. I'd advise running through the motions with the router turned off. Make sure you are feeding the timber in opposition to the direction of the router bit rotation.
@garyjohnson10027 ай бұрын
I could watch your videos 24/7 and then dream about me doing the same in the garage. The trouble is your good enough is way different to my good enough, my draws look more like cardboard boxes. Seriously, lovely work.
@kuffyswoodworktipsandtalk7 ай бұрын
Haha, I say 'good enough' far too often. It simply means I can't be bothered fixing the clear error that I can see. If I say 'perfect', that usually means I got really lucky and it actually is perfect.
@peternewman97137 ай бұрын
Nice work Kuffy!
@kuffyswoodworktipsandtalk7 ай бұрын
Thanks Peter.
@FixitFingers7 ай бұрын
I didn't even realise this was on your 2nd channel until you mentioned it :P Came here first, Kuffy Long Form videos are always worth the watch... even the drawers :P 3 years! I thought my 11-month long dice towers were a saga 😆😆
@kuffyswoodworktipsandtalk7 ай бұрын
Thanks, man. Some people really like long form videos. This video is literally just an initial edit to the short form version, so I may as well upload both. 3 years isn't so long. I'm now editing a video that I started filming in December 2020!
@FixitFingers7 ай бұрын
@@kuffyswoodworktipsandtalk cant wait! ... I'll watch the short one soon :P I am 10 days behind my usual sequential watching, but this one caught my eye and jumped the queue :)
@kuffyswoodworktipsandtalk7 ай бұрын
@@FixitFingers That's the best news I've heard all day. It means my video thumbnail is eye catching. 👍
@DownUnderWoodWorks7 ай бұрын
Great video and build mate. I always learn something from you. Loved the idea of planing the edge of a board flat on the bench with the plane on its side. I always struggle to keep it square when planing vertically 👍🏼👍🏼
@kuffyswoodworktipsandtalk7 ай бұрын
I've always hated having to try. If I can find a way to make the tools do the work for me, then that's what I'll do. Thinking back, I didn't even bother to check if my edges were square, I just assumed they'll be close enough 🤔
@user-vf2uf1kv8d7 ай бұрын
Very useful my friend. Thanks..❤😊
@kuffyswoodworktipsandtalk7 ай бұрын
Thankyou 🥰
@michaelclark28408 ай бұрын
Great video showing real life possibilities if you are not aware. I do like your router table setup. Do you have build plans for that?
@kuffyswoodworktipsandtalk8 ай бұрын
I don't have build plans for my router table. I'm considering rebuilding it so it looks nicer.
Hehe. I was thinking more along the lines of hardwood construction, possibly with some burl veneer for added bling 😜
@balazslakatos98178 ай бұрын
if you have a bearing on your router bit then using fence is pointless.
@kuffyswoodworktipsandtalk8 ай бұрын
The fence allows for faster work, given the greater level of control. Also, the pressure from the bearing on the timber creates a slight indentation in the edge of the wood.
@balazslakatos98178 ай бұрын
@@kuffyswoodworktipsandtalk got it , you right!
@buzzpatch22948 ай бұрын
thanks - i learned something
@kuffyswoodworktipsandtalk8 ай бұрын
I'm glad it was helpful 😌
@makenchips8 ай бұрын
Finally, someone that could explain this with precision. Thank you for this find video! Columbus Michigan
@kuffyswoodworktipsandtalk8 ай бұрын
You're very welcome. Thanks for watching 👀
@martinkorinek54898 ай бұрын
Very good explanation of the proper router table usage. Only thing I dont like is that you need to open cabinet door to stop the router, does not seems to be as the safest way.
@kuffyswoodworktipsandtalk8 ай бұрын
Correct, thanks. I'm probably going to rebuild my router table at some point. I'll add an emergency stop button that can be easily activated with my knees.
@J-Chong8 ай бұрын
Gracias ....muchas gracias. Buena explicación.🇵🇪
@rdftx29908 ай бұрын
Very well done - thank you!!!
@adtymryd62959 ай бұрын
10:55 wow, I was just about to do this WITH A MUCH THICKER WOOD in my shop. Didn't know THAT is going to happen. Thanks for showing this!
@kuffyswoodworktipsandtalk9 ай бұрын
I chose a small, lightweight piece of timber for a reason 😂 A heavier piece has a chance of breaking the router bit, which is usually uneventful but expensive.
@adtymryd62959 ай бұрын
@@kuffyswoodworktipsandtalk seriously... I'd rather lose a material/timber than a router bit 😭 once again, thank you!
@renaissance20057 ай бұрын
Why would you do a cut this way?
@claudiorazzetti86829 ай бұрын
Thank you , one your explanations on router feeds , i corrected my mistakes ,, very helpful sir.
@kuffyswoodworktipsandtalk9 ай бұрын
You're welcome 😊
@CornelionSigismon9 ай бұрын
You make perfect sense, thank you
@kuffyswoodworktipsandtalk9 ай бұрын
Thanks!
@user-gk6jq3lb3h9 ай бұрын
Fantastic lesson. Yesterday was my first time using router table. I was trying to figure what I’m doing wrong. From the get go of your video I was doing things wrong already up to the cutting part. Thanks a lot for making this video. Going to practice again today applying what I learned from you. Valuable lesson I learned.
@kuffyswoodworktipsandtalk9 ай бұрын
Awesome. If you have any particular trouble, don't hesitate in asking for help.
@user-gk6jq3lb3h9 ай бұрын
@@kuffyswoodworktipsandtalk yes. Thanks you. I now understand my mistakes, your examples and explanation what will be the danger and result if not done correct makes sense to me now. Been practicing, I have confidence at this point. I honestly, my first day on the router I was kind a disappointed, going throw the towel, good I saw your video. It is a valuable lesson to people like me. Appreciate it. From California, USA 🇺🇸
@MachinedInWood10 ай бұрын
This is the best explanation of all of this that I’ve seen. Great job!
@kuffyswoodworktipsandtalk9 ай бұрын
Thank you very much 😊
@pauldobin883810 ай бұрын
Great video for beginners very good information. Thank you.
@kuffyswoodworktipsandtalk10 ай бұрын
You're welcome.
@Delcredere10010 ай бұрын
First class lesson. Very clear and easy to understand. Thank you.
@kuffyswoodworktipsandtalk10 ай бұрын
Thank you very much 🤩
@royruther489510 ай бұрын
It seems the another problem putting the board between the fence and the cutter is the side force put on the router and the bit. Since both the fence and router are set solid, it would put some force against the bit. It may not mess it up right away. But the side force would not be good for the bearings in the router or the shaft of the bit. Of course, the feather board would help.
@kuffyswoodworktipsandtalk10 ай бұрын
Correct. When you apply too much lateral force to the bit or the bearing guide, you will snap the shank or burn up the bearing until the outer bearing ring separates. The bearings inside the router body are generally pretty good because they are fixed in at least 2 points so it doesn't flex much, if at all.