GRBL Shield video 6 setting your work area

Рет қаралды 13,762

Күн бұрын

Пікірлер: 21

@rjopperman953 2 жыл бұрын

Dude this video is basically the best one ive watch thus far on this matter, ive been struggling for weeks and only came across your video now! Thanks!

@UnplannedPerpetuality Жыл бұрын

Yep, pretty much the best intro out there, kudos to you.

@malcolmhodgson7540 Жыл бұрын

A wealth of really useful good information. Thanks.

@dhirendralakhera5327 2 жыл бұрын

Thanks bro you are the best teacher i have

@laschizofnetre4652 2 жыл бұрын

Hello thank you for sharing your knowledge, it is really useful. My problem in "Home" position with endstops, I am in negative position -15... -15.... What command to use to position the "home" in X0 Y0, as in your example. When I move around the workspace I'm always out of bounds. Merci

@crystavandenboer6606 5 ай бұрын

Hey! So we’ve really been struggling with the parameters of our Elegoo Phedca 20w:.. I followed your video step by step, paying to catch up and going back when needed… and now my laser is trying to burn off the field and the cradle is slamming into the housing… any help would REALLY be appreciated.

@nirgore100 Күн бұрын

I try to cancel the $N0=G53... and i dont know how to do it . please help

@marimuthuraja5115 7 ай бұрын

Thank you so much

@eneskeles 6 ай бұрын

Teşekkürler bro ;) dvd = x-16y-16

@minravex9919 10 ай бұрын

hello buddy....I'm using a laser tree laser module on grbl firmware....I can't Find my laser tree 10w on the grbl material DB... Another one is when opening file for cut...or engrave...that raster image setup pop up don't cone up....please any help is anticipated..thanks😊

@red_juan Жыл бұрын

Could I make the homing cycle start with the Y-axis first then the X-axis?

@brakthehun Жыл бұрын

Yes. Make Y cycle 0,, then X cycle 1.

@red_juan Жыл бұрын

@@brakthehun Sorry I took so long to answer, but I found it thanks a lot

@manimaximus7586 2 жыл бұрын

xy limit switch stop working not homing function plz help

@raix456 10 ай бұрын

Great video, but I ran into some problems. After enabling the soft limit ($20=1), my laser completely froze into its position. After that I got an alarm 2 and everytime I try to disable the soft limit ($20=0) I cant do it because the console does not work. Any idea how I could fix that ?

@brakthehun 10 ай бұрын

Try $X to unlock it,, then $20=0. Don't use soft limits unless you have a homing culycle or it will set your current position as the max X and Y depending on your homing mask.

@raix456 10 ай бұрын

@@brakthehun I typed $X into the console but it just stays there and does nothing. Pressing the lock icon also doesn't work. Is there any other way to unlock it?

@brakthehun 10 ай бұрын

Try restarting the machine 1st,, then doing a $X.

@raix456 10 ай бұрын

I restarted the machine and tried again but it still won't unlock it.