Yeah. Do you have an email I can send it to??

Actually!! here's a link: cad.onshape.com/documents/7996392b63313da0ff8f9ad6/w/e0e855329f8517c98a7a7fb9/e/a6020cc4c1c549ef54d2f367

@@brakthehun thank you bro. I like your design compact and neat.

hey bro, i followed your instruction in core xy but mine doesnt home... i have my limit switches in x and y axis

@@marlonglodo1930 did you set up one at a time homing in the firmware?? Did you set up your registers for homing?? ($22)

Yup. The z axis is still usable. I still wouldn't give the rotary a homing cycle

I've had it up to 42000 mm/s I raster along the Y axis instead of the X axis

@@brakthehun What 42000mm per second ! Thats insane Anyways can you please start reuploading the co2 build videos i was actually making one for myself

@@BlackwingzYT sorry. Per minute. I am out of town. I have all the wiring videos done. I just need to upload them.

@@brakthehun I am making the laser cutter using nema 23 and tb6600 with the belt system with working area of 3 foot by 2 foot should i use 1/32 microstepping or 1/16 microstepping and is there any advantage to 32 microstepoing.. Because obviously the speed will be slower. and can you please answer my another question What is the maximum speed i can get with the arduino i am using xy homing firmware and 20 tooth pulley

Homing cycle 0 x axis Homing cycle 1 y axis

Did you save the config file before compiling??

@@brakthehun yes , i save the config file before compiling

Message me on FB.com/brakthehun

and in my lasergrbl software for grbl configuration there is no $ 30 $ 31 $ 32 bro ,,😥🙏🙏

I might need to see a pic of your machine. Sounds like you need to swap your x and y cables. How do I message you??

do you use the whatsapp application?

my problem is now in the servo, the servo doesn't work,

Are your dimensions setup yet?? Set your $130 and $131. To disable Z homing,, you can also use lasergrbl to upload firmware

I already set my $130 and $131, is there any way around without flash the firmware? For example can i set the value of all z axis to 0? Will it do? I try it before editing the config.H on grbl firmware deleting the z axis and then uploaded it again to my arduino uno using IDE, but when i open lightburn, when i try to run the x and y axis, its just keep saying busy until i upload the old grbl firmware 1.1h, it work all fine but i cannot figure out how to homing with 2 axis, ? Any tips? Try flash the firmware first using laser grbl?

@@screeningstudio3868 yeah,, use LaserGRBL to flash it. It has precompuled firmwares for you to use. Use the XY homing one

Tony Baltazar thanks a lot, it easier with laser grbl, your video really helps a lot, can you recommend which cam software is the most easeier to generate g code for beginners 😁

@@screeningstudio3868 I usually use laserGRBL for images. grid.space/kiri can generate laser tool paths in SVG format and you can open them up with lightburn.