GRE over IP Tunnel in Packet Tracer

Рет қаралды 113,620

9 жыл бұрын

www.danscourses.com/CCNA-4/gre... - To download the Packet Tracer activity file that coincides with this tutorial. Configure a GRE VPN tunnel in Packet Tracer 6.1. This tutorial is designed to help prepare you for the Cisco CCNA certification exam.
Subscribe! and visit my KZfaq playlists for more video tutorials.

Пікірлер: 68

@robersonsoliveira 9 жыл бұрын

My favorite channel to study CCNA.

@farhangazzajr9981 6 жыл бұрын

me too

@An-xv1jo 4 жыл бұрын

Mine too from the very beginning

@Mustang-bl2vz 9 жыл бұрын

I am really admired about your way of explanation and your cool way of teaching.

@JaimicoCL 5 жыл бұрын

Amazing explanation, as always, Mr. Dan

@oldies81 6 жыл бұрын

Hi Dan, Thank you so much for the packet tracer lab, I have no words to express my gratitude I currently upgraded my PT to Version 7.2 my issue is when I configure the tunnel mode to IP, it automatically picks IPV6IP for some reason, for the lab to work I have skip tunnel mode configuration and everything works perfectly also I tried using BGP in lieu of static routes and it works fine as well.

@desarrollojava 6 жыл бұрын

Thank you for your clear and academic explanation.

@shahaburrahman767 5 жыл бұрын

Nice tutorial for my CCNA exam.Thanks a lot

@tusharkaushik9554 6 жыл бұрын

you explains thing's in more easy way then others do

@tusharkaushik9554 6 жыл бұрын

all credits

@avihskshetrii Жыл бұрын

Great explanations step by step. Thank you, sir!

@moondigitall 9 жыл бұрын

Thanks sir it is very useful video for me .

@itleitner 4 жыл бұрын

Thank you!! That was very, very helpful! It worked!!

@MetalSparty87 4 жыл бұрын

These Video's are helping with CMCIS 154 so much during this pandemic. The course material just doesn't seem to give the appropriate examples for me to understand. Thank you.

@franciscojaviergarciagarci2066 4 жыл бұрын

great explanation

@md.saifulislam8633 3 жыл бұрын

Hi Dan thanks for the tutorial.

@danscourses 3 жыл бұрын

You are most welcome!

@HassanTofaha 7 жыл бұрын

very good thanks

@neillattz 5 жыл бұрын

At 7:58 , why would it be .6 (the 3rd IP in the /30) as the 4th octet? On the other side (at R1) at 11:31, it was .1 (the 2nd IP in the /30). Why not use the same (either 2nd or 3rd IP in the range)? Why is R1 using the 2nd IP (201.150.200.1) in its /30, but R3 is using the 3rd IP (201.150.200.1) in its /30?

@venkatasurendra6519 8 жыл бұрын

Do the Interface Tunnel IP address's should be in the same subnet or not. What if there are two or more routers in between tunnel interface routers.

@shakirbukhari 7 жыл бұрын

if we use 2 routers between HQ and remote then how we have to configure that?

@ITsupportian 7 жыл бұрын

they should have done that before.. I had CCNA, and they didnt' have the tunnel... I went to the business world naked. They should also add VPN site-2-site, most business uses firewall

@nazah5517 3 жыл бұрын

Thanks dude, u saved me

@leolmelo1 7 жыл бұрын

Hi. Excelente explanation ! As a professor I'd like to show your example to my students. Do you agree ?

@danscourses 7 жыл бұрын

Thank you. Absolutely!

@perfilwsantos 3 жыл бұрын

by the way, your content is good! congratulations!! if you can, please, send a video about GRE+IPSec working togetter

@DevLPful 3 жыл бұрын

Saved my day

@wenbin96 9 жыл бұрын

Hi. May I know when you will be doing a video for IPv6 GRE tunneling? Thanks!

@abdulkadirmohammednur5573 5 ай бұрын

Amazing, thanks!!

@atadjs 2 жыл бұрын

This helped thank u

@kansen-sei8353 7 жыл бұрын

Omg thankyou dan

@kansen-sei8353 7 жыл бұрын

aww crap wrong account x.x

@valentingarcia2865 5 жыл бұрын

Hello Dan, first of all thank you for taking the time to create this video. This is by far the best tutorial and explanation on GRE. You're a true professional with a pleasant voice. Would it be possible for you to make the Packet Tracer activity file available again? Or may the configuration that I need to set this lab up? Thanks in advance!

@HDFactory-HD Жыл бұрын

Is L2 tunnel possible in CPT?

@JEFFMAN90 7 жыл бұрын

I have packet tracer and the tunnel command does not work for me help!!

@markusscott6696 4 жыл бұрын

Ok nice but what if I have let say 50 routers between R1 and R3? How I can ensure connectivity between R1 and R3 and then set tunnel?

@doggy007ooo 3 жыл бұрын

Let's say that the 50 routers between R1 & R3 are connected via BGP since a single ISP won't necessarily provide you a consecutive connectivity with 50 routers. Coming back to your question, just don't care about those 48 routers in between. They will learn the routes that they require in order to make your GRE tunnel work. So config is gonna be the same. Source int, Destination WAN facing ip and GRE mode is all you have to set between the two provider edge routers.

@reyn.n 3 жыл бұрын

is there anyone have still access to the file or link? the zip file is no longer available in the site

@jeraldrodriguez3445 3 жыл бұрын

What is the gig 0/0-1 ip in router 2??

@tinsonjosephbabu9888 Жыл бұрын

nice one

@Jomster777 4 жыл бұрын

What are the only configurations I need to do for R2?

@doggy007ooo 3 жыл бұрын

Give the interfaces ip addresses. it will have connected routes to R1 & R3 but not to the internal networks. Just how ISPs work

@perfilwsantos 3 жыл бұрын

hey bro, link of page is down, and in search for "gre ip" on your blog result in a download link crashed for the zip file, can you fix it?

@roidsforcoc5319 9 жыл бұрын

Hello sir Dan, Do you have a video tutorial about Ipsec VPN? Thanks.

@danscourses 9 жыл бұрын

Roids For COC I will do an IPsec video this week!!!

@roidsforcoc5319 9 жыл бұрын

danscourses All right! Thanks sir Dan.

@shwesin6048 8 жыл бұрын

+danscourses I cannot find IPsec video ! I like all your lecture videos

@danscourses 8 жыл бұрын

+Shwe Sin I am going to be making an IPsec video with a Packet Tracer Activity in the next week or so.

@shwesin6048 8 жыл бұрын

Thanks alot danscourses

@deepeshshiwakoti7249 Жыл бұрын

Why is your website down? 🤕🤕😢😢

@koreandaddy_haha9550 3 жыл бұрын

Is there any show command to verify GRE VPN connection ?

@danscourses 3 жыл бұрын

show ip interface show ip route show ip interface tunnel show ip tunnel traffic show interface tunnel show statistics tunnel

@koreandaddy_haha9550 3 жыл бұрын

@@danscourses thank you much

@serhiyholovin1066 8 жыл бұрын

uve probably made a mistake on r1 when write the tunnel destination , it must end on ...200.5 not ...200.6 ,cause on the r3 u write ...200.1, or i dont undrstand smth ? :)

@serhiyholovin1066 8 жыл бұрын

Okay i downloaded the .pct opened it and understood. The ip address on int g0/1 on r3 is ending ...200.6 ,and the ip address of int g0/0 r1 is ending ...200.1 , so no mistake was maded :D

@eugenberzani1216 7 жыл бұрын

dieded

@polokomohotsi6112 6 жыл бұрын

your web server seems to be down.

@ChaoMridu 5 жыл бұрын

Hello Sir, I am trying to replicate this network on cisco packet tracer. Can you please provide me router R2 interfaces' ip addresses ?

@ChaoMridu 5 жыл бұрын

ignore my question. Completed the task. Thanks for your guidance :)

@deepeshshiwakoti7249 Жыл бұрын

cool

@euanta95 9 жыл бұрын

This did not work at all for me... packet tracer is saying that Interface tunnel 0 is not even a command... "Router1(config)#interface tunnel 0 ^ % Invalid input detected at '^' marker." any help? thanks

@danscourses 9 жыл бұрын

***** No "int tun0", hmmm. What version of PT are you using?

@euanta95 9 жыл бұрын

The most recent version, 6.1.2 I think it is.

@euanta95 9 жыл бұрын

I checked and I'm on version 6.2

@qamarislam1851 7 жыл бұрын

You must update the version pf packet tracer.

@qamarislam1851 7 жыл бұрын

Thanks for the video. I helps alot.

@mikeyspice250 Жыл бұрын

im in the UK. ??????????? Ive set this topology up exactly and for some reason the Tunnel only shows as Tunnel up/down Ive reset all 3 routers back to factory defaults and only add the specific config to get Tunnel0 up and working but still shows as Tunnel up/down i can however add "tunnel mode gre ip" - successfully on both R1 & R2 routers - although when i do "sh run" command it does not show this extra configuration. not sure whats wrong! ???????????????????