I love it when the pallet recycling videos start out with, "First, put the wood through your professional grade joiner and planer!"

MUY buena calidad, el texto imagenes. kzfaq.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO Un manuel muy completo y trabajado. Resulta muy práctico. Para principiantes y profesionales. Lo recomiendo

Love it, I would've used glue along with your fasteners for a more sturdy and long lasting build. Ty for the upload.

I want this to be my first project. I love how you did the sides not too sure on the top and bottom though I might want to reinforce the bottom part and the top sharper cuts so they fit tight up against each other over all this is the easiest way I've seen it done.

looks good..need glue to last though

Very nice project. Very inspirational. I can think of a hundred ways to utilize and change this project. Thanks for you idea and inspiration.

Bravissimo falegname ! complimenti e un cordiale saluto da Luciano il perugino (Italia) 😀🍀

Nice project. I like how you used so many wood jointing techniques. It gives us hope that we too can build a wood chest.

Bonjour, e c'est nécessaire aussi de vernir à l'intérieur pour protéger contre les insectes du bois

Parabéns 👏👏👏 muito lindo o baú. Também faço baú com forro de cedrinho .

Este Baú é o mais lindo de todos! Parabéns!!!

Quedo bien hecho el cajón. Saludo de New Jersey.

I wouldn't trust putting much weight in it with those finish nails holding the bottom boards on.

You make a lot of interesting furniture that i have seen out pallets you are the best. ROCCO

Yup! My kind of project! No words needed in this video! Perfect!

Excelente trabajo !!! Un saludo de uruguay🇺🇾

I love it, great job and thank you so much for the wonderful upload........🇦🇺👍🏽👍🏽

Increíble que buen trabajo Amigo.. saludos desde Argentina

i'm just jealous coz you make a wonderfull job bravoooooooooo beautifull , good job

Careful with the saw nubby.

Buen trabajo, aunque personalmente le hubiera aplicado también cola de carpíntero. Muy bonito.

Je trouve ce coffre magnifique , j'aimerai en faire un pour mes petits enfants mais j'ai un peu de mal à évaluer les cotes, en tout cas bravo.

عمل رايع ونا سويته في المنزل. طلع شغل مرتب شغل نضيف نضيف 👌👌♥️🥰🥰

Good job. Spray paint / dye before adding the hardware & hasp fixings need to be behind the plate for security.👍

it seems like some one already had an encounter with a saw -- woow -- keep up the good work congrats

This is a great video to base projects off of

Looks great, I just noticed your lock was installed incorrectly, Screws should be behind the metal. Otherwise anyone can remove 3 screws and open chest apart. I like that you used planer and sander to make the wood looking perfect. Good way to repurpose the pallets. I will definitely try it and recycle my pallets

Excelente MAESTRO !!

Very Nice Chest and Makes a Great Heirloom for a Family to pass on.

Viendo sus videos e aprendido mucho más de carpinteria, e guardado muchos de sus videos para hacerlos

Great Job. You got it perfect made. Thanks for share.

It’s one of the best pallet wood projects I’ve seen in a while. Thank you for sharing. However, no glue and no screws? I can’t see that box lasting long.

Simple & looks great. Nice work.

Semplicemente stupendo!!!! complimenti bravissimo!!!👏👏👏

Never point a nail gun towards yourself when useing an air nailer otherwise good craftsman ship cool build

This is nice. Just what i was thinking of making and now i see how to do it .

I like the concept, but if you are planning on keeping anything heavy in it for any length of time, your bottom is going to fall out. The bottom needs to be reinforced with something other than staples or brad nails.

Parabéns ótimo trabalho....grande abraço do Brasil 🇧🇷

I made a foot locker box for my nephew using all sorts of scrap wood that came from a wood bed, part of my brother in law's garage he tore down, some came from a pallet. I made it work and it came out great. From a guy that didn't know what he was doing. Now I have a air nailer the next box I made came out even better. I don't have a planer so all my box's look ruststic looking.

Gostei muito parabéns pela criatividade.

Gostei muito parabéns pela sua criatividade

كلش حلو وشغل مرتب وبسيط و رائع 👏 👏

I have always wanted to make a trunk, i guess its time i do it. Thanks for sharing.

Complimenti!!! Molto bella, vedrò di copiare il progetto!!

Gracias felicitaciones y siempre adelante

I liked the missing finish behind the latch, that would drive me nuts if I owned it.

Best DIY video I’ve seen Thank you

I have a couple of pallets. Just need the equipment and the workshop

Nice job & fun project.

Not a single drop of glue. 😂

Lo isiste con mucho Cariño y te quedo muy bonito

Lindo demais amigão meus parabéns. Se fosse para mim eu pediria na cor envelhecida esse é meu gosto 👍

Excelent video Direct like from România

Really impressive! Nice decorative piece

WOW that's beautiful 😍

very nice project. I might give this one a try.

Guy has an awful lot of faith in a brad nailer and doesn't like glue, evidently. I would have stained it before attaching the hardware, but that's just me.

Simple and beautiful 🇵🇸❤️🕊 I love it Respect and love from Jerusalem Palestine 🇵🇸

Great video and finished product. Most people don't have a jointer or a planer.

ESPECTACULAR. FELICITACIONES.

he is eyeballing everything:)

Amazing results!!

Молодец! Хорошая вещь!

Belo trabalho meu amigo... Abraço... 🛠️👍🏼

Muy buen trabajo!!! Felicidades y saludos desde Monterrey, N.L.México

Muito bem feito esse baú. Parabéns Carpinteiro.

I was hoping to see him also glue the wood as well as nail it

Fantastic good job! Greetings from México

Excellent work 👍👍👍

Well done sir, thanks

Très beau travail 👍

i like it looks good. i think il take some inspiration from this and make a few for some storage

Great job! Love it 💚💚

Hermoso trabajo amigo

simple, just what Ive been looking for

里面也噴一層油就更好了。

With most pallets you'd be lucky to get four usable pieces of wood.

Precioso👏👏👏👏me enamoro el cofre de mis sueños 😍

You can always trust a carpenter who is missing digits!

Yes, it is great work. You must be happy with the results.

Very very good 👍 felicitaciones

Part of hasp,,, backwards...not lock picking,,,lol Just a screw driver,,

mil likes, good job

I love how it turned out.

So beautiful. I'll have to pester my dad to make me one 😁

Espetacular.👏👏👏👏👏

good job well done.

Good job You are excellent

👏👏👏👏 good work

Great Work

Awesome. Now you just need to fill it with treasure and bury it on an island😀

Pragtig

Great job.

At 10:00, you are routing in the wrong direction, that is why the router is kicking so much. You're supposed to go against rotation, like on a table saw, but you are going with the direction of rotation, which is called climb cut, and the router is trying to jump out of your hands. Couple that with holding your fingers that close to the blade insted of on the handle, well... Let's just say I'm not surprised by the missing finger.

Nice build

Parabéns ótimo trabalho

Wow, free handing the curved rabbet like a boss! good work, like it a lot but why no glue?

Pallets in my area are mostly plywood now not solid wood and many delamintes at the ends. It will take a lot of effort to deconstruct the pallets to save all the component parts unless you saw through much of it. Nails hold on so tight some will break into pieces that you might just use a saw.

I usually either fast forward or stop watching when he shows every single pass through the joinrer.

so nice very good