We need these in 6.5s asap!

Notable difference between the two settings. Both the SDX and VEX are No joke . Thank you for the time to show us sir

I've got 2 of the 8" VEX's, but I'm keeping my fingers crossed that they'll be available in the 6.5's. I know a lot of us motorcycle pro audio guys would snatch them up QUICK!

And this is why sundown is king 🤴 absolutely love what yall are doing amazing products 👏 🙌 😍

Man, those sounded good. 🔥

Daammnn that VEX is loud!!! I just wish it came in a 6.5" speaker. Awesome speakers tho!!

Sounds good and clear 👍🏻

the issue with these PA style mids is that they get loud as fuck, but they have severe limitations in the actual midbass region. The last 3 years of shows I'be been to it's the same with every build. Subwoofer system plays up to 60hz maybe 70hz really well, but the pro audio mids don't have anything below 100hz and there's a huge chunk missing between 60-100hz and there is a lot of musical information in that little 40hz range between 60 and 100. This is made worse by shoving a dozen of these drivers in essentially no airspace in a door build. For shits and giggles I offer to RTA test at shows, I've seen systems down 18db at 90hz

Awesome vid as always man! Can you share the approximate crossover point you played these at? 80hz safe on these? I just installed 2 VEX 8’s on my wakeboard Tower

You mentioned using a different amp to get the right power than what you would actually think. I was wondering if you could recommend an amp for the x12 v2 D4. Being wired down to 2 ohm doesn’t give me a whole lot of options

They sound good what would recommend for the neo pros and I will be running the BR R1 super tweets

Ok this video was way better showing off the vex nice one🔥🔥

Sounds really good. keep up the videos. What's going on with the bass blazer???

I'm sold...thank you😎

I would like to see a comparison between these and the PRV carbon fiber 8 inch

A vehicle demo would have been best for cabin gain. But these sound very clean. Looks like an awesome product.

Ok took a step back and found it, what would be a recommendation for doing a Yukon Denali Xl. 6.5’s in the doors and 6.5 neo pro’s ?. And two 13’s in the back.?

Man, that’s sounds good even through just watching your video with my Bose ear buds it’s so crisp and deep . Bro , straight Fire. Hey what’s the name of the tracks you were playing man that was nice.

Excited for the u series components to come out!!!

Ok sir you know what im gonna ask where can I get those sundown CANS and yes vex 8 and those sa 2.75 just to the right on top.of bench would sound better but I love it

This is what I was saying man lol. This speaker need the power to make it wake up and boy did it ever. I can hear the difference between the two videos and its crazy loud in this one

How would these compare to the Sundown Neo Pro 8" v2 mids? I'm guessing that the VEX will be much better for midbass and the Neos would shine in the midrange. What's the actual frequency response of both speakers because that info isn't available on the Sundown website and which tweeters are better between the GT series and the ET series?

Ok I have 6 of the 8 inch neo newer ones v3 I think 8 ohm what's a good amp for those 6? And what's the real rms rating on each

Can you make a video on 3 of your best 10” subs? I want to run some 10” subs by Sundown Audio but I don’t know which ones to go with.

Derrick, what’s the lowest this vex 8 will play ? Im putting 2 on the sae 100.4 bridged each on own channel? Please and thank you sir

Just wish the SDX amps could run with my CMAX. But 15volts is their safe limit. Looking for a couple more SAX amps. Gave the SDX amps to my son for his Camry build

where can i get some pods for 1" and 2.5" for a-pillars?

I do got some other mid bass/mid range speakers that I prefer in all honesty but you cannot go wrong with the sundown vex 10”

CLEAN clear

They sound healthy

Thank you for making the video and yes it’s 2 8 that i have 🎉

I know about the KZfaq compression I bet it will sound better in real life. I bet it will be a good speaker for SQ builds that's what I am aiming for

What’s the high pass and low pass frequency on those vx

I would love to get my hands on some VEX mids, but they would need to be available in 6.5" size. So far, the NeoPro is the best available series in that size. With that being said, I would really love to get my hands on some 5.25" variants of the NeoPro. Many vehicles, and especially older ones use a 5.25" size for speakers.

Where can I get some of those speaker cans?

I really wonder how my crossfire xt-pro 8s stack up against this.

Nice

That vex sounded good. It was hitting so hard my TV was shaking. Does it need such a big container like you had to sound good???

Vex-8 or sd3-8 for playing 70-200hz?

Hell yeah

That was a huge difference 😳

Whats the frequency range?

Ok bro now thats sounds great!!!! Now this is wasup!!!! Way better test!!!! If you are able to..... remember us bassheads love those distance test. 👍❤💯

4 of these would do me fine!

So is it really a mid or a woofer?

I really wish they came in a 6.5" but I'm looking at getting 8 of the vexs

Damn,, that was only 100 watts pushing that thing,,, nice!!! I have to check into those! 😊 Great vid bro!

I need to get an Amp and the vex and the gt1 for my can am..

More on the neo pleasee!!!

I need more midbass than midrange. Hopefully the new u65s fill the void. The vex isn't available in 6.5 and honestly may overpower a typical tweeter

Why not make the vex in paper cone also?

We need a demo and a tour of the sxs

Sound frick'n good. Just wonder how it do in my front door. Set those 2.75" (dash) mid, and a couple tweeters. And a SALT 2000.6.

Can't really tell unless you have other speakers playing to compare them

Where can I get that shirt !

What's the lowest you'd recommend playing the Vex 8 and Vex 10?

I got about 6 vex 10” and they pretty aight

I think that was the issue camera was to close as soon u put far it sounded even better

You are gonna have me building a center console for some Vex 8's in my truck build. Dammit Derrick leave my wallet alone. 😂😂😂😂

I need those VEX! 4 per door.

Has anyone compared these to the apocalypse AP-M67AN? I head the apocalypse were the loudest on the market

👍👍👍👍👍👍👍👍

Hello, I'm a noob ... Okay , I get , changing gain level & X-O points,... But.. did I miss ... how much signal voltage , into the amp. ?

You know what would be nice if you could get Sundown Audio as a OEM option in GMC, Chevy, Cadillac, Ford, and Lincoln Vehicles as a Audio option rather than Bose Audio.

damn it loud, where is 6.5? i want these lol

Where can i get that can beacause SHEEEEEEEEESSSSSHHHHHHHHHHHH that thing is nice!!!!

I need another line to keep up.......

measure how much power the amp draws when only tweeters are working and then add the mid and measure again . you will see it is only 20-40 watts extra output added by the mid channel when lows are crossed . you dont need a very powerful amp with mids actually . but you have to sell them right ? ok so dont tell this to anyone : )

I've always been told when you bridge a four channel amp down to two channels the signal isn't as clean.

💚☝🏽

Derrick, do those Mids come in 6 1/2??

🔊🔊🔊🔊👌👍

6.5 PLEASE!!!

Iam sorry iam not getting rid of my speaker set up.. I'll do the subs for pow wow... but not s/q

Where is the “in-person” button on the app? This video might be pointless without it.

Hello sir Make video of full setup like 3 way sound setup With DSP 4 Tweeters 2 Components U-6.5 CS pairs 2 Coaxial SA-6.5 CX V2 pairs 2 Midrange speaks pairs 2 ZV6 12 Subwoofer With all arrangements from Best suitable Amplifiers and DSP best tuned sounds setup Thank you

Just show spl,db, meter. please when u test. Please, and thank you. I see so many videos showing it play. But I'd like spl,db. Meter. To show actual loudness.

Pretty sure my diamondboxx bumps harder but prove me wrong

100x4 better then 200x2? How so?? Anyone?

thats not 9mm of xmax -maybe 4.5mm one way

Now my ears hurt but a good hurt.

Or two......😂😂

If I came up with junk but wanted to dishonestly sell them as turds, I’d make an unofficial channel to deny any liability too.

And hes gone again

Haha Derrick I’m just gonna lay this right here to prove your point even further! They are not much for any games! kzfaq.info/get/bejne/Z9yqnJZ00dzHlWQ.html

If you wanted to make a good representation of how something sounds, You should have just played the single speaker not added 2 tweeters. Not the truest to scale :(

WHY DO THESE AMPS HAVE A BUTTON THAT MIRRORS CH.1,2 ONTO CH. 3,4??? The salt amps don't... I'm trying to take a Salt 500.4, bridge 1,2 and 3,4 to make a 2 channel amp AND THE EXPLANATION IN THE MANUAL IS FUCKING HORSESHIT!!! and its not just you guys, its all the manufacturers. I cannot get anywhere close to an answer on the proper RCA hookup for a bridged channel pair. The white stripes TAKE TAKE TAKE vocals are only played on the left side. This song will not work using bridged speakers because the stereo inputs have been combined and there is no more left and right. Is this just an unavoidable drawback to using bridged channel pairs? SO THINGS I NEED CLARIFIED: Do both RCA inputs need to be occupied for maximum output on a bridged channel pair? Does it matter if the RCA signals are stereo? (Some amps state specifically MONO signal which makes sense in this case) ORRR should I take 1 channel from the head unit and use a Y-splitter to duplicate the mono signal and feed it into both channels (either 1,2 or 3,4) From what I see, you lose capability inputting the left and right stereo signals into your bridged channel pair, it should be a mono signal LEFT to channel 1,2 and a mono signal RIGHT to 3,4, but I'm not sure the proper way to achieve this and no where does it say how. I don't see how using stereo signals can be the ideal way to provide signal to a single speaker based on the white stripes example. PLEASE HELP MEEEEE!!!

I've been clicking 10sec skip ahead for 5min and you're still talking 😑

Wow is all i gotta say 💯💯💯💯💪💪💪💪💯💯💯💯💪💪💪💪💯💯💯💪💪💪💪💪💪💯💯💯💯💯💪💪💪💪💯💯💯💯💯💯💯💯💯💯💯💯💯