Fact not myths covering the cause of cratering primers when you are at or below standard loading pressure. Understanding the cure and added benefits from a properly installed bushing. www.gretanrifles.com/
Пікірлер: 19
@jonlennon33488 жыл бұрын
Great video and you did a badly damaged Remington for me and now it is perfect with zero problems. Thanks for your excellent work.
@bavariasuhl6 жыл бұрын
Greg did 2 bolts - a rem 700 and a rem 7 , turned it around in 2 weeks --- fantastic job.
@cesarsaavedra30959 күн бұрын
Best in the business wish you were still taking work.
@leeNWHuntinganFish47134 ай бұрын
This is what I'm exactly going through with my 6.5x284 Norma with H-4831SC with almost as low charge as the books show. Thank you for taking time to tell us Bob from Capstone sent me your way 50 weeks out Wow!!! I guess I will just purchase the entire bolt. I find it odd they don't correct this issue sense checking my firing pin I see a flat spot on the tip which has made it like a spear so I'm punchering the primer. Check the ends of your firing pin for roundness it could be sneaking up on you like myself.. another awesome video, Greg it's why your so busy Wisdom.
@edmobley39 жыл бұрын
The best explanation I've heard
@95talon07 Жыл бұрын
Great explanation thank you very much
@ADVJason3 жыл бұрын
I totally need to get this done on my 700. Hope things back to normal so I can send it to you soon
@guidogg213 жыл бұрын
Hello What is the correct firing pin protrusion for a 308 win AR-10 rifle? Is it true that it is more than in an AR-15? This means 0.044-0.059" for 308 and 0.028-0.036" for 223. Regards GUIDO
@stormy71355 жыл бұрын
I own a FN SPR that blows 2-3 primers within every 100 rounds, have 1400 rounds throught the rifle. I took it to a gunsmith today and he said my firing pin was too long and shortened it. He test fired it today and I could still see cratering and I suspect he fixed nothing, guessing it will still blow primers. The rifle was designed for a large primer and I shoot Lapua small primer 6.5 CM. Do you think you could still bush the firing pin even though its been shortened? Thanks
@markrichards26346 жыл бұрын
Gregg, regarding hardened steel as in rssr's post, is this why Mil Surp Mausers are not bushed ?
@anthonygendron97374 жыл бұрын
This looks like a Bergara bolt and appears to be the problem I’m having.
@timothyconnor87457 жыл бұрын
How do I get ahold of you ? Website is down or something......
@Shifty6BR7 жыл бұрын
Timothy Connor Websites back up and a good thing..Gre Tan is top notch and I have more stuff to send out his way
@airborne350g2 жыл бұрын
Do you work on Ruger Precision bolts? Nevermind, saw your website and you are no longer taking in new work.
@russr8 жыл бұрын
why dont you do this work on AI bolts?
@gregtannel26788 жыл бұрын
+russr AR platform and foreign gun companies us case hardening steel on the bolts and firing pins. They only have a thin skin of case hardened steel. Once machined off, soft steel. Bolt action rifles are made from tool steel 4140 for the most part. When hardened, it is completely hardened. Case hardening steel is a cheaper way to manufacture.
@thaiexodus29168 жыл бұрын
Thanks much for this vid. At 3:00 The firing pin itself, the business end, obviously guides the entire pin. This is not it's job. That is what this entire video is about. Why not make the chamber the pin rides in near as precise as the firing chamber?
@gregtannel26788 жыл бұрын
The bolt shroud guides the F/P at the rear of the bolt and the bushed bolt guides the front. The internal body of the bolt is larger so as not to have the F/P spring & dry fire collar rub. A more consistent F/P travel is preformed from shot to shot. There is no gain to have any other part of the bolt touch the F/P with two points already guiding it.