Gridfinity Tips: 3D Printing Your New Workshop Organization System

Рет қаралды 279,229

Күн бұрын

So it's been a few months since the lovably bizarre KZfaqr Zack Freedman of Voidstar Lab released his "Gridfinity" 3d printed workshop organization system, based on the 3d printed organizer ideas of Alexander Chappel. And I don't know about you, but given how much I LOVE organization tips, diy, and workshop organization, I have been hard at work gridfinitifying my entire life. And in this video, I wanna share with you some of the tips, tricks, and words of wisdom that I've come up with after hundreds of hours and kilos of 3d printer filament devoted to this lofty project.
🤫 Get behind the scenes and exclusive content on my Patreon: / thenextlayer
💬 JOIN MY DISCORD: jle.vi/tnl-discord
🎥 IN THIS VIDEO: 🎥
00:00 Introduction and about Gridfinity
00:29 Tip 0: Why Zach Freedman's System is Better
(I love both of you guys, I'm a huge fan, no disrespect, Alexander Chappel!)
02:57 Tip 1: Generating Custom Empty Gridfinity Boxes
04:59 Tip 2: Creating Custom Gridfinity Boxes to 3D Print
07:05 Tip 3A: 3D Printer Nozzle Sizes for Gridfinity
09:01 Tip 3B: Top and Bottom Layers for Gridfinity
09:54 Tip 4: 3D Printing your Gridfinity HOT
11:26 Tip 5: 3D Printer Filament for Gridfinity
14:07 Tip 6: Analysis Paralysis and Workshop organization tips
16:36 Tip 7: Size isn't everything (at least not in organization)
17:33 Bonus Tip: Gluing gridfinity grids into your own workshop drawers
18:13 Tip 8: 3D Printing one part at a time to start with
So there you have it, my top 3d printing tips for saving filament and time while organizing your workshop with gridfinity. If you enjoyed this video, and would like to see me create more 3d printing videos, diy videos, or just share my favorite 3d print ideas, please SUBSCRIBE and comment below to let me know!
RESOURCES & LINKS MENTIONED IN THE VIDEO:
🔗 Zach Freedman / Voidstar Lab Gridfinity video: www.google.com/url?q=...
🔗 Zach Freedman's follow-up video: h • 3D Print a Modular Too...
🔗 Alexander Chappel's video: www.google.com/url?q=...
🔗 Gridfinity Reddit: / gridfinity
🔗 Voidstar Lab Discord: / discord
🔗 Gridfinity unofficial website: gridfinity.xyz
🔗 Filled in gridfinity boxes: www.printables.com/model/2105...
🔗 My Gridfinity Caliper Holder Design: www.printables.com/model/2606...
🔗 Gridfinity Openscad model: www.printables.com/model/1743...
🔗 Thomas Sanladerer video on 0.4mm nozzles (sorry, I can't pronounce your name, I tried) • 0.4mm nozzles just bec...
🔗 Stefan at CNC Kitchen's wonderful research on temperature of 3d prints: • Printing PLA at 265°C?...
🔗 Stefan at CNC Kitchen's video on resuming 3D prints (must watch) • HOW TO: Resume a faile...
SUPPORT THE CHANNEL BY USING THESE LINKS:
🔗 Overture Matte PLA (Highly recommended) geni.us/4Z4q2j [Amazon]
🔗 Overture Eco PLA Midnight Black (Only $17.99/k!) geni.us/UXqH [Amazon]
🔗 My preferred source for 3d printer nozzles: Prusa: s.click.aliexpress.com/e/_De2...
🔗 My preferred source for 3d printer nozzles: Creality: s.click.aliexpress.com/e/_Dk7...
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: jle.vi/polymaker
📍 My favorite 3D printer right now: jle.vi/voronkits | jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
📍 My favorite BUDGET 3D printer right now: jle.vi/sovol
📍 Check out the official TNL merch: shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: / @thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: / thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: kit.co/jlevi
💬 Join My Discord: jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter

Пікірлер: 350

@thenextlayer Жыл бұрын

Thanks for watching! I'd love to hear what you think of the tips... do you agree or disagree? Did I miss any? Let me know!

@odeball22 Жыл бұрын

Zack is better free information.

@riffraff60 Жыл бұрын

I found it informative, would watch more

@strictnonconformist7369 Жыл бұрын

Absolutely, jumping in with a full build plate without verifying smaller is a recipe for disaster. Note this applies outside of Gridfinity prints as well, especially for fit and printability issues, or verifying that something is big, small, strong, flexible enough.

@richardwonka 21 күн бұрын

This is effing GOLD! Much appreciated!

@stevesibert3947 3 ай бұрын

Great video. And definitely keep going!

@geoffreyleblond 6 ай бұрын

You're my new favorite person.

@codyeastman3966 2 ай бұрын

well done.

@davidcrosthwaite Жыл бұрын

Wow, only realised this was your first video when reading the comments. Great video for anyone, especially for a first! ☺️👌🏼

@thenextlayer Жыл бұрын

Thanks!!! I really appreciate it!

@TheJacklwilliams 11 ай бұрын

VERY VERY NICE!

@baschoen23 5 ай бұрын

Yeah wow, I was 3/4 through when I read the this comment and I'm sure a year in, he's even more practiced but I thought he was just a seasoned to-camera youtuber until I read this.

@tuupiintia3028 Жыл бұрын

Awesome video mate!

@_BELMONT_ 4 ай бұрын

Thunbnail looks really familiar!

@John-NeverStopLearning 4 ай бұрын

Yes, 👍 keep going

@automaticprojects Жыл бұрын

Great video.

@TS_Mind_Swept 4 ай бұрын

I really need to start printing some of these, my 3D printing tools are very quickly taking up much more surface area than I have, and it would be really nice to have a plethora of specifically shaped baskets for all my strangely shaped eggs 😅

@servant74 4 ай бұрын

I would like to see a video on automated plate clearing after a print. I know some people do it, but I haven't determined a good way for my Ultimaker 3

@poljaar 8 ай бұрын

Mfw listening to Tip 8 with a full print bed underway 😐 Great vid!

@thenextlayer 8 ай бұрын

Haha! Hope the video helps

@ementrekin Жыл бұрын

So helpful and you're funny af!

@jolonandrade2793 Жыл бұрын

I love overture

@jimvolkening2311 Жыл бұрын

Cool follow up to Zachs project

@thenextlayer Жыл бұрын

Thanks! I’m gonna do more gridfinity but I don’t know if I’m gonna record a video about it

@zalllon 2 ай бұрын

I realize this video is old, but I really find it helpful. Thank you for posting this.

@jaysam41 7 ай бұрын

I really like your videos so please carry on

@thenextlayer 7 ай бұрын

Thank you!!!

@MrKlawUK 5 ай бұрын

for tip 2 - i wonder if there is a workflow to use an iphone or similar LIDAR equipped smartphone to scan a tool and use that scan to modify a solid box ‘cutout’? the resolution of those should be good enough for that task.

@erastanieldiaz934 Жыл бұрын

Amazing video, thank you for it!

@kenwisniewski6634 Жыл бұрын

Need more gridfinity

@thenextlayer Жыл бұрын

On it

@JoshuaSolanes Жыл бұрын

Man your video was *really* well done: very professionally edited, you speak very clearly and hit important notes instead of filling time, and I appreciate you giving credit where due. I'm subscribed!

@thenextlayer Жыл бұрын

Much appreciated! I won't disappoint you.... very cool videos coming soon

@Dunkeyhote Жыл бұрын

This was lit thanks

@TheSquigy Жыл бұрын

Thanks for the vid! I'm just starting on my gridginity journey

@DavidCousins 5 ай бұрын

Great video

@thenextlayer 5 ай бұрын

Thanks!

@franciscocv1995 5 ай бұрын

Dope but what i want is more like a peg bored with clipps that hold the tool but slide in making it more customizable and clean/open.

@briandswan Ай бұрын

I'm running Bambu X1Carbon and seem to have a bridging issue. Every time I print the bins there is at least 6 strands that don't seem to adhere. Can you point me to a site, a video, a list of pointers that might be able to help? I'm sure it will help more than just gridfinity, but I've been printing a ton of these for my small parts collections and my wife's jewelry collection (she mandates everything be perfect so I'm in REAL HOT WATER lol). Thanks for any tips, links, lists, etc. Cheers!

@dennis1790 8 ай бұрын

סרטון יפה מאוד, כל הכבוד

@thenextlayer 8 ай бұрын

תודה, זאת הייתה הראשונה שלי! :)

@MrWaldorfian 5 ай бұрын

One bin that I want to see is for spade dril bit storage. I want therm flat so I can see them easily and the bin needs to be no more that 20mm tall. I have yet to see anything like this anywhere.

@Druforithe Жыл бұрын

I love your coloring scheme titles!

@fazzah777 Жыл бұрын

Subbed. This is what YT should be all about. Quality content

@trix4rix Жыл бұрын

Great tips man! Keep it up!

@lorenazn6567 Жыл бұрын

Really enjoyed your video, thanks for the tips !!! keep it up ! ❤

@thenextlayer Жыл бұрын

Thank you! Will do! Make sure you're subbed

@3dtomecoates92 Жыл бұрын

Thanks for the tips. Just getting started with mu gridfinity system.

@thenextlayer Жыл бұрын

Glad to help

@nickrudd2568 6 ай бұрын

hahaha, Whats mad, I got sick of plastic bins in my woodshop, So made timber bins for my printshop. I can fabricate quicker than i can print so its time saving and also satisfying as you made it yourself.

@tysonstephenson2181 8 ай бұрын

Do you have any projects that use the brass inserts? I bought some inserts, but now have no idea of a project that needs them.

@dac8767 Жыл бұрын

big fan! keep up the good work

@DJ_K0D4 Жыл бұрын

"I like you guys, but I like her more" Good answer ;p

@procurementzen Жыл бұрын

in your video you speak about a video where you create your own caliper box - was that a mistake because I cannot find this video on your channel.

@kihgu Жыл бұрын

Man i actually think u deserve some 100 k subs 😃

@thenextlayer Жыл бұрын

Thanks! The channel is less than two months old… so, hopefully one day

@LoeKie_Aus Жыл бұрын

Thank you for the summary and tips. Great info before I dive into the gridfinity.....

@thenextlayer Жыл бұрын

Happy to help! Would you want to see more gridfinity content?

@LoeKie_Aus Жыл бұрын

@@thenextlayer indeed. I am looking to mod the base plates for mounting and integration to anycubic mega series machines

@Galileocrafter 8 ай бұрын

8:50 I must have been lucky, I had it set to 15% infill already and didn’t think much of it. Prints are great, but my X1C struggles with the overhangs of the lids.

@FilamentStories Жыл бұрын

Great video, love the tips!

@thenextlayer Жыл бұрын

Wow!! I’m so honored you checked out my channel! I love yours! Hope we can maybe collaborate somehow in the future

@KenLord 4 ай бұрын

Why not PETG, so you dont get all the warpy warpy and adhesion problems? I'd also say - sometimes no gridfinity is the best gridfinity. A lot of volume within those drawers ends up as unusable space. That caliper could have had a much smaller / simpler stand under it, giving you a couple centimetres of that drawer back.

@FELIPE072011 Жыл бұрын

I need a hydroponics group to get files, I can't find much source of files for pipes (elbows, tees, hose adapter and etc. : )

@Nifty-Stuff Жыл бұрын

Man, this was a GREAT video! Excellent work crediting so many awesome makers, and linking to them, the projects, etc. in the description. This video made me subscribe! :)

@thenextlayer Жыл бұрын

THANK YOU for the great feedback :) I'll keep it up!

@PrintsbyDungeon Жыл бұрын

Hey brotha where did you get your hexagon organize peg board!? If 3D printer please share stl 🙏🏼🙏🏼

@BaghaShams 3 ай бұрын

First I'm hearing of this system, and what a fantastic introduction into it! Really great indepth video

@thenextlayer 3 ай бұрын

Glad you enjoyed it!

@StephenSchlie Жыл бұрын

Really enjoyed the video, will definitely be watching future stuff you put out!

@thenextlayer Жыл бұрын

Awesome thank you! Make sure to sub, epic video coming out next week

@d3ltaprint115 Жыл бұрын

Thanks so much for posting your videos, I just got my first printer and your videos are super inspiring. Love the content, keep it goin!!

@jamiekawabata7101 Жыл бұрын

Thanks for the mention! Nice video!

@thenextlayer Жыл бұрын

Thank YOU for the awesome project

@Ronoaldo Жыл бұрын

This is a great system, I wasn't sure about it. What if you make a follow up showing your setup, what types of boxes you used and what crazy color schemes you ended up with?

@thenextlayer Жыл бұрын

I just might do a short on that

@littlehills739 9 ай бұрын

open Q if u go to bigger nozzle do u need to buy new wire filerment size too?

@vemgm Жыл бұрын

im running 220 on general speed, 230 on Sport, 15% infill, 2 layer top and bottom, 0.4mm nozzel with a bambu X1C with PEI bed Yes for new sizes, print 1 and test befoe pring a while tray of bins

@Tennouseijin 5 ай бұрын

>Me, after listening to the analysis paralysis chapter and the "make it your own" advice: - Hmm... ok... let's color code things after ponies. Tools for making things pretty will be colored after Rarity, tools that are very down to earth colored after Applejack, tools that are all about fun will be Ponkified, tools that are fast and furious will be Rainbow, measuring and organizing tools will be Twilightified, and my favorite tools will be Flutterbutter colored...

@Nightfallwoodworks 7 ай бұрын

I’m very new to 3d printing. My printer will be here tomorrow. I’m just going through KZfaq to learn as much as I can before jumping in…I’ve watched several of your videos now and they never fail to teach me something and make me laugh! Great combo. You get the first sub from me to a 3d printing channel.

@Unmannedair Жыл бұрын

Stringing isn't a problem at higher temperatures if you use combing and wiping.

@stokmannetje Жыл бұрын

Good tips for printer settings with nozzle 0.8. Thanks!

@thenextlayer Жыл бұрын

Sure thing :)

@tmlrobotics5446 Жыл бұрын

Amazing video. Printing my first grid now 👊

@thenextlayer Жыл бұрын

Niiiice enjoy!!

@jeffbarr1960 Жыл бұрын

Great video, keep going and happy 3D printing to you as well!

@thenextlayer Жыл бұрын

Thanks, you too!

@beanbagcommando Жыл бұрын

I just started watching and I’m hooked. I don’t even have a 3d printer but I like the enthusiasm and projects. Kee p it

@thenextlayer Жыл бұрын

Wow, thank you :) Honored

@juliox1716 Жыл бұрын

Sweet video, I'm waiting for the next one!

@thenextlayer Жыл бұрын

Coming soon!

@photelegy 9 ай бұрын

2:26 "... how charmingly Swiss ..."? Is this a common phrase?

@patrickcallahan2210 Жыл бұрын

Nice video! Lab tours are alwayys fun to see!

@thenextlayer Жыл бұрын

Thanks for the feedback. Would you like to see more of my office/studio/printer room? I love video requests

@edleg388 Жыл бұрын

I'm two months late, but there you go my good man. Thanks for the video, i found it really useful

@thenextlayer Жыл бұрын

Thanks man

@jraiello Жыл бұрын

I support Alex, but now he is remodeling his bathroom, I supported him for 3d. I paid for the rights to use his designs and have printed some models, but I am moving to the open source, makes absolute sense!

@hvddrift Жыл бұрын

Thanks, lots of great tips. Looking at the openSCAD program for the first time not sure of the steps to take. I open then cups file but only get errors

@hvddrift Жыл бұрын

this is the error: WARNING: Can't open include file 'modules/gridfinity_modules.scad'.

@thenextlayer Жыл бұрын

Download the entire directory from the GitHub and keep it in the same structure as it is in, file folder structure. It’s looking for supporting files and not finding them.

@hvddrift Жыл бұрын

Thank you. That did it

@thenextlayer Жыл бұрын

@@hvddrift Happy to help! Make sure to subscribe, much more coming :)

@jamiekawabata7101 Жыл бұрын

@@hvddrift You're not the first one to run into this issue. I think I might change the organization so this doesn't happen anymore.

@sppeart Жыл бұрын

Yup - great info and I like the way you present it. You come off more as someone who enjoys the hobby than a technical expert. That makes it easier for me to relate to. I'm subscribed and look forward to your new videos!

@thenextlayer Жыл бұрын

Thanks for the feedback. I’m glad that my noviceness is serving me. It is gonna be real apparent when I try to build a voron next month lol

@jostrad Жыл бұрын

Jeeze. I'm glad I saw this video after already printing myself a slew of gridfinity bins and grids. I didn't have any of the problems you mentioned. Your tips about adhesion and heat and print quality concerns would have scared me off. If your printer isn't tuned already and you don't know how to print with a filament, no matter what you print it'll probably not turn out great.

@thenextlayer Жыл бұрын

That’s fair. I took a chance with that PLA pro. Never again from that brand

@jameshbond5142 Жыл бұрын

Great video! Looking forward to seeing more

@thenextlayer Жыл бұрын

More to come!

@Popesta Жыл бұрын

keep it up mate your one of the best out there for useful content

@thenextlayer Жыл бұрын

Wow, HUGE compliment... thank you! Much more to come

@matthewblumenthal804 4 ай бұрын

I'm still researching 3D printing. I find your videos very accessible. Very helpful. So, keep up the good work!

@3dmakerzone75 Жыл бұрын

Thanks for sharing your experiences with the grid storage solutions. I’ve seen both Alex’s and Zach’s videos but have yet not taken the plunge. Keep the storage videos coming. I’m subscribed and look forward to more cool tips.

@thenextlayer Жыл бұрын

This is good feedback: more storage videos. I'm also obsessed with storage, so that shouldn't be difficult to do. I added it to my task manager as feedback :)

@DavidJones-pi8rl Жыл бұрын

Tips were excellent more similar tips videos please!

@thenextlayer Жыл бұрын

Will do!

@robertzarfas9556 Жыл бұрын

I bought Alex’s system over a year ago and used it to organize my office at work. Then, as I was building my new wood shop I saw Zach’s video. So I printed a handful of both and opted to stick with Alex’s for my shop setup. My shop is actually very similar to Alex’s in terms of the types of tools I have and the types of projects I do so it made sense. Also I found the bins a bit more sturdy and easier to print. But you’ve convinced me to go back and give the gridfinity system a second chance. Maybe it’s expanded to the point where it’ll be worth using to organize my new office that’s being built as we speak. Great video, well produced and articulate, funny but still to the point. I also had layer adhesion problems when printing the gridfinity bins, but I also usually print around 200. So I’ll try upping the temps. And lastly I couldn’t agree more about with your advice to just print one until you’re confident. I’ve had to learn that one the hard way too many times 😅

@thenextlayer Жыл бұрын

Thanks so much for the indepth comment Robert, it means a lot to me that you'd spend the time replying. Yeah, Gridfinity has grown, and also, you can make it whatever you want, with these auto-generating tools and stuff. I don't like proprietary systems, it's why I love Bitcoin, and open-source stuff on my computer, and Prusa, as opposed to other machines. I like open source and hwat it stands for. That said, if I'd already printed so much of Alex's stuff, I might not re-print it, I'd just make the NEXT project Gridfinity :)

@robertzarfas9556 Жыл бұрын

@@thenextlayer I'm definitely with you on the value of open source. As a teacher SO much of the technology in schools is just clever marketing designed to trap schools into proprietary ecosystems. SMART boards, TI calculators, Chromebooks, Ipads just to name a few. Anytime I get a technology for my classroom makerspace I always try my hardest to make sure it's opensource and all the programs I teach kids on are free.

@Pennywisdom1188 Жыл бұрын

Your video quality was excellent. I honestly couldn’t tell this was your first video and just starting your channel. I felt like you have been doing this for years. Keep it up and good luck!

@thenextlayer Жыл бұрын

haha thanks. I've been in content creation for about a decade, I'm new to 3D printing content is all :)

@digitalpilgrim Жыл бұрын

You're doing great! Keep it up!

@thenextlayer Жыл бұрын

Thanks!

@ChristianN- Жыл бұрын

Gridfinity is awesome, good tips! :)

@alarhansen1756 Жыл бұрын

Wow. The quality of your videos are insane. When i looked at how many subs you had i got really suprised (probaly expecting +100k) Keep up the good work!

@thenextlayer Жыл бұрын

Wow, thanks! This is a HUUUUGE compliment. The channel is only a few weeks old, but I'm working on growing it. Please make sure you're subscribed :) I have some REALLY REALLY exciting videos coming out soon.

@ZionBrock 9 ай бұрын

I haven't been able to open Jamie's files in OpenSCAD that's mentioned @4:18. Anyone else having this issue?

@GRainwater13 Жыл бұрын

Love this video! So much good information so fast. Please elaborate on 0.8 slicer settings! CDO rocks! ( alphabetical order).

@thenextlayer Жыл бұрын

CDO? Fill me in :) Also, sure, I might do some more videos on slicer settings

@GRainwater13 Жыл бұрын

@@thenextlayer Same as OCD but the letters are organized in alphabetical order.

@samuelsmall8449 Жыл бұрын

Great video!

@thenextlayer Жыл бұрын

Thanks! Please make sure you're subscribed :) I have some REALLY REALLY exciting videos coming out soon.

@Genesis-dj7kw Жыл бұрын

Listen, there is one thing I've learned from this video, and you've earned a sub because of this. "Analysis Paralysis", never heard of it before, but it fits me so well. I don't enjoy Art, simply because I hate the feeling of starting with a "blank canvas", where there's no real clear goal, besides maybe an idea of sorts. However, I love tinkering and practical problem solving. Once I know where I want to get to, and once I've drawn up a plan I think that'll fit these needs, I can work on it. But before there's a plan, a solution I want to create; I cannot work. On anything. Be it projects in school, or be it 3D Printing and tinkering. I was fairly confident I have ocd, due to compulsive actions and thoughts. Even if this was just a joke about OCD in the video, this genuinely made something snap in my head and I will try to be less harsh on myself for this issue. Thank you, even if this was just overanalyzed and completely besides the point of what "Analysis Paralysis" was meant to indicate here. PS, if you even had the patience to read this: Impressive production quality for the size of your channel. If this is where you're starting out, I can't wait to see what your standards will be once you reach the 100k's

@thenextlayer Жыл бұрын

Thanks so much for sharing your touching personal story with me. I read it with great interest, actually :) I personally DO have a form of OCD, though it mostly manifests in my relationships (worrying about losing people) than in my physical space. That said, I definitely am a little obsessive over things like 3D printing, organization, etc. I can tell you from experience that Cognitive Behavioral Therapy REALLY helped me, because it's basically teaching you how to not give your troublesome and intrusive thoughts too much attention. Basically, you learn to say "eh, there's my brain doing that thing again. It doesn't mean anything. What was it I was doing again? Oh, right, writing this email." It really helped me a LOT.. check it out. Also, thanks so much for the kind words. I hope to grow the channel, and every sub counts, so make sure you're one of them :)

@jgdovin1 Жыл бұрын

Randomly showed up in my suggestions.. your production quality is amazing for such a small channel. I expect you to explode soon! Inspiring as I have a massive workshop but just can’t bring myself to record videos haha.

@thenextlayer Жыл бұрын

Thanks so much! I've been in content creation for a decade :) hehe

@venerablesmokey Жыл бұрын

Subbed without hesitation. Keep posting pretty please 🙏

@thenextlayer Жыл бұрын

Thank you! Will do! Much more intense videos coming soon :)

@Pcoxproductions Жыл бұрын

990 here to encourage you not to give up

@thenextlayer Жыл бұрын

Just crossed 1000!!! Thank you!!!!

@dankay9202 Жыл бұрын

Great stuff man, new to the channel here, looking forward to seeing more!

@thenextlayer Жыл бұрын

THANK YOU. Please make sure you're subscribed :) I have some REALLY REALLY exciting videos coming out soon.

@todsandberg Жыл бұрын

Thanks for the tips. You saved me from mistakes and helped others gain from sharing your lessons learned with printing gridfinity. Incredible video both in quality, content and production! I hope you continue making vids like this! Subscribed.

@thenextlayer Жыл бұрын

Thanks! Appreciate it!

@TheReal-MFer Жыл бұрын

I would like to see how much luck you have with a FLSUN super racer with a .8 nozzle... It was a nightmare when I attempted it and I think you are probably far superior of a maker than I am.

@thenextlayer Жыл бұрын

I would love to but I had to turn down all printer offers because I don’t have room

@bettybolerjack361 Жыл бұрын

Just wanted to say thanks for some great tips! Also, thank you for leaving a comment on Jamie's post on Printables which is what got me here. I was feeling a bit overwhelmed by all the options when I ran across Jamie's OpenSCAD model. That, in itself, made me feel much better but watching your videos with such great tips was the icing on the cake!

@lomoDaniel Жыл бұрын

Well done. Keep it up.

@thenextlayer Жыл бұрын

Thank you, I will!!!

@mattbass4807 Жыл бұрын

Amazing first video dude!

@thenextlayer Жыл бұрын

Thanks so much!!!

@CraftyEnelrad Жыл бұрын

Yes, please. Make more videos. Love your presentation style.

@thenextlayer Жыл бұрын

Thanks! Make sure you’re subbed. Many more coming

@torq21 Жыл бұрын

Every time you say you're not a real maker I hang my head in shame, each time a little lower. Now my head is on my desk and I'm crying in my failure.

@thenextlayer Жыл бұрын

lol it's a joke man! no such thing as a real maker, we're all on a journey, don't sweat

@k4jo123 Жыл бұрын

Thanks for the great tips i just startet to gridfinitise my workshop so they come in very handy. I Just have to mention that glueing the grid in place is not the best option in my point of view. I just print little 90 degree angles that fill the gab of the grid to the box it should fit into. With this you can reuse the grids and it adjusts just right to the box.

@thenextlayer Жыл бұрын

Oh damn that’s smart as hell!!! That can be tip 12. Thanks for sharing!

@JohnUllrey Жыл бұрын

I think Alex is Norwegian. If you follow his channel he is currently renovating his apartment in Oslo.

@thenextlayer Жыл бұрын

Originally Swiss :)

@kernelsmith Жыл бұрын

Dude. Excellent writing & editing, excellent humor, excellent pace, and, I can't emphasize this enough, you don't say, "like", or "literally" literally every 5-10 secs. Or, my newest pet peeve, repeatedly saying "I'm not gonna lie to you" and/or "I'll be honest with you". If I thought "you" were lying, I would stop listening. Get off my porch! No, srsly excellent work!

@thenextlayer Жыл бұрын

Thank you!!!

@michaelfrancone6922 Жыл бұрын

Great video! Would love to see a video on how to tune for bigger nozzles. My 0.6mm nozzle is tunned perfectly, but I just can't get my 0.6 tunned right and there aren't any in-depth videos on youtube regarding this issue.

@peternorton1107 Жыл бұрын

Yeap I'll watch your videos :D I have to print a whole load of gridfinity first but I've hit the bell so I know when to take a pause from loading new filament ...

@thenextlayer Жыл бұрын

Hahaha nice thanks for your support I genuinely appreciate it a lot

@CaptLobo-tm5pt Жыл бұрын

Hey bro! Since I watch this video, I have seen all the ones you have posted and I love your channel. Have you ever thought about making a video where you create a gridfinity box from modeling a tool in Fusion 360 to the settings in Cura? Cheers!