How many gallons can you use before changing the resin.

@@lel3450 I just go off the houses instead of gallons maybe 40 to 50 houses before refilling it with the sand from the website, I only use it for the final rinse to help conserve it

Thanks for the info, sir. Do you find that a pump is necessary to get the water up to the roof for decent flow?

Thank you. I would not recommend laying it on its side because the resin is like sand. Find a good location for it upright and it should serve well.

I just run some water through it if I’m not using it at least once a month. I’m in Florida though so I use it year round.

The orientation is correct? I did not run into this at all. Call Griots if you have the same unit. Their customer support is top notch.

It’s Gladiator Gear Wall. They have hooks.

They are Gladiator Gearwall panels and hooks.

Time is probably not as accurate as how many gallons or washes have you done with the variable being how high the tds is where you live.

I have not tried this but I will next time I use it and let you know.

@@NYAJoeJr tried on mine. About 1 gallon to flush.

That’s the ?

Their customer service is top notch. I had the same issue and they replaced the connector l. Also it has a lifetime warranty. Now as for the on demand pump, I’m not sure.

How did you realize the seal was broken where the 2 bypasses connect? Like the plastic was literally broken, or the TDS was roughly the same between when using the bypass vs. not?

I think about 4000 gallons so it all depends. I myself bypass the filter when doing initial rinse. I use DI water for foam canon and for final rinse only. This helps save the life of the resin.

@@NYAJoeJr thank you for getting back to me. I have looked at other systems and l keep coming back to this one. Iam set on buying this one for the price and the amount of gallons of what’re it provides. Thanks a lot and happy detailing.

@@cal88usa it’s definitely worth it and is the best system out of all the ones I spent weeks researching. Being able to bypass the tank with included valve makes it the simplest and cleanest look without having to buy a bunch of other PVC to build your own bypass. No brainer here.

@@NYAJoeJr 4000 gals??? Do u have that # right?

Appreciate the video and the replies. When you are by passing the DI filter for pre-rinse, and initial rinse after contact wash, what sort of bypass are you using? I can't imagine that you're actually disconnecting/connecting the hoses from the bib and DI system to the pressure washer each time?@@NYAJoeJr

It all depends how much you use it. I’ve had it a few years but don’t use it every weekend and I think it’s time to replace the resin. The resin is about $95 and it comes in a bag that you pour in the tank.

You want Di mixed bed resin any online water system company sells there are my kinds of resin but for spot free rinse you want "Di" resin makes no difference where you buy it. Sold in cubic foot bags about $200 usd.

No, I ordered it on Amazon.

Flexzilla Garden Lead-in Hose,... www.amazon.com/dp/B01D51VBFS?ref=ppx_pop_mob_ap_share

a.co/d/7ZuFLWK

It depends how hard your water is to start. I believe I can get 4000 gallons before I need to replace the resin. I only use it for the final rinse and when I’m using the foam cannon.

@@NYAJoeJrI think your 0 button got stuck

I will test today. For an update. It stayed at 0 after pressure washer but today I will do a test for a 5-6 month review

@@NYAJoeJr I imagine it'll still be really good. According to griots spec's you should get like 1000 gallons out of it due to your low ppm tds. I'm looking for solutions with my super high ppm water. Patterson, CA has some of the worst public water in the state! I've never seen over 600 from tap and my tds meter reads 612-631ish. With our RO system under the sink I get 16 with a 2 year old filter.

@@snooka2484 ayyy I live in patterson too and the water is trash!!! Even using an RV filter and still doesn’t do good.

@@kuksgarage2715 @Kuks Garage Small world...and town. Yeah man I'm looking into a prefilter of some kind now before just throwing in the towel and using it lol. Is the whipple coyote yours? I'm running a whipple Sierra. I have it in the shop in San Jose for fueling upgrades...trying to break 700hp. Damn truck is too heavy!

@@snooka2484 lmk what you go with cause im tired of it and idk what to do. Been going to a car wash in modesto that you do on your own and the water is good there with all the filters they got lol And yes i drive a whipple coyote in town lol but broke the tranny so its out to get rebuilt and hell yea thats gonna be crazy!!! Just becareful with all the shits thats going around. Sideshows and cops cause they arent playing around anymore out here. You can follow my builds on IG @fox_yote302

Are there any pre-filters that you recommend? Thanks

@@robertsheffer1989 yes. The clear source rv 3 way filtering system. It’s the one I got.

@@DatDudeDEnd Awesome. I will check it out.