Learn how to install your GROHE GrohTherm 2-Handle Thermostatic Trim with this step-by-step video.
Пікірлер: 23
@vanversi52614 жыл бұрын
Trimakasih #Calonteknisi water heater like belajar di sini 👍
@chrisbyrne55742 жыл бұрын
At approx 1:40, he shows the difference between standard ring & Aquadimmer ring. I'm going to assume that you can remove the tabs to convert standard ring to an Aquadimmer ring
@daliatole1446 Жыл бұрын
My top lever was loose/not engaging, and water was not shutting off. Somehow, we turned off the water .I then removed the snap ring, reinstalled everything, the handle is still a bit loose. Now water won't turn on at all!! So frustrating. $500 plus spent and can't use the shower.
@GroheDiverter Жыл бұрын
👍 nice
@RoSharma2 жыл бұрын
I want to place my handheld to the left of the the mixing vale. Can i use A&B for over head shower and handheld? Also can i run both shower heads simultaneously with SINGLE FUNCTION 2-HANDLE THERMOSTATIC VALVE TRIM?
@GroheAmerica2 жыл бұрын
Hello! Thank you for your question. Port A would need to be the capped port if you are only using two outlets of water. Also, you can run both shower heads simultaneously with Single Function 2-Handle Thermostatic Valve Trim if you purchase the optional “Stop Ring for Shared Function" - part number 14060000. - GROHE Social Team
@sumitprp2 жыл бұрын
At 55 sec, how do I order Grohe temperature limit ring? part number please? I installed Grohtherm and broke the exact same temp limit ring shown here. Order 3 additional parts (black color back plate, temp controller, etc) but none contains the temp limit ring. Contacted Grohe team few times already and they asked to order the other parts but I didn't get what I was looking for. Can you help? I think the one you are showing at 55 sec is the same for Grohtherm smart controller. Thanks
@TrevHolland2 жыл бұрын
The stems coming off the diverter and temp control valves aren't long enough. They're only making about 1/8inch (or less) of contact with the back of the knob. Because of this, too much stress was put on the plastic for the diverter knob and it broke. Now my diverter knob doesn't engage the teeth on the valve stem. Is there any way to make those valve stems longer? Or to make the entire box sit shallower in the wall?
@GroheAmerica2 жыл бұрын
Hi Trevor, thank you for your question. If the valve has been installed too deep into the wall, you will probably need to purchase the extension kit - part number 14048000. - GROHE Social Team
@brentlybeezer11 ай бұрын
@trevholland did this work for you? i have the same problem. I'm looking at part number 14048000 and it doesn't look like it will work with the diverter control. @GroheAmerica are you sure it's not part number 14058000?
@andrekhoury62522 жыл бұрын
how u adjust the flow if there is only thermostat and diverter ??
@GroheAmerica2 жыл бұрын
Hi Andre, thank you for your question. The top handle on the Grohtherm 2-Handle Thermostatic Trim includes an integrated volume control as well as the built-in diverter. - GROHE Social Team
@nabilvlog60734 жыл бұрын
❤❤❤❤❤❤❤❤💋💋💋💋💋💋💋💋
@zerdesh0012 жыл бұрын
Hello, i have a problem, the water temperature is too hot or cold, impossible to adjust to the right temperature
@GroheAmerica2 жыл бұрын
Hello, thank you for contacting us. Can you please email us at Groheconsumerconnection@lixil.com and write, "Attention David/Alisha" on the subject line? We'll be happy to assist you. - GROHE Social Team
@TommyScanlan4 жыл бұрын
2:35 is the main part of this video where you want to pay attention. That plastic snap ring falls off all the time and the entire switch falls out the mount. Terrible design to have your diverter handle held in by a plastic flexible ring that unsnaps all the time when turn the diverter in circles. (using shared functionality)
@GroheAmerica3 жыл бұрын
Hi Tommy, thank you for contacting us. If you'd like you can contact us to go over this issue. Please reach out to groheconsumerconnection@lixil.com and write “Attention David Gaines” on the subject line. We'll be happy to assist you. - GROHE Social Team
@Mrdoctile4 жыл бұрын
To bad your India call center was no help. Missing 1 long brass screw. called... can i get one... We had training on this and 3 is ok...AH NO! can i get one mailed?...NO!.. you will have to send the hole unit back... I hung up ... I'M SCREWED... THANKS
@GroheAmerica4 жыл бұрын
Hello Mrdoctile, we are sorry to read this, please feel free to send us a direct message via Twitter, Facebook or Instagram and we will look into the situation. Kind regards, Your GROHE Social Team
@stos418 Жыл бұрын
So Grohe goes plastic! I've ordered on of these, but quickly returned after seeing it's cheap product made of plastic. I called Grohe USA and their response was "everyone is going in this direction". Well, actually not: I've got alike product from Hansgrohe made of a solid brass. Grohe, please let me know when you'll get back to quality products, if at all. For now let me say: goodbye Grohe!