LG Refrigerator Ice Dispenser Repair: Ice Dispenser Flap Not Closing

Рет қаралды 323,803

4 жыл бұрын

A modern LG refrigerator ice dispenser is repaired. The symptom to the problem was that the ice dispenser flap was not closing. The ice dispenser flapper not working will cause warm air to enter the ice chute & partially melt the ice which can re-freeze & cause the ice to stop coming out. A straightforward "how to fix" video.
Subscribe and visit me here: grokshop.tv
Find it on Amazon: www.amazon.com/shop/grokshop
INFO:
LG Model: LFX25973ST /03
Product web page:
www.lg.com/us/support/manuals...
Service Manual *VIEW*: www.manualslib.com/manual/732...
Service Manual *DOWNLOAD*: www.manualslib.com/download/7...
Dispenser Removal Info (quoted from LG): appliantology.org/blogs/entry...
Music:
Special THANK YOU to my friends at Epidemic Sound!
player.epidemicsound.com
#grokshop #appliancerepair #refrigeratorrepair #LG
* We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites

Пікірлер: 267

@jimworley1048 5 күн бұрын

I am very handy and like to do all of my repairs. But honestly, I had no idea how to tear into this icemaker. Outstanding video made it absolutely easy for me to fix the repair. Mine was broken the same as the video so all I had to do was clean everything up and go to the store and buy the same screws that you displayed. Thank you very very much for making my life easier. Great video.

@dgilliss Жыл бұрын

Wow! Thank you SO much! I am a 69 yo grandma and with your help I was able to fix mine which had the exact same problem. A few tips to anyone else doing it- pay attention to the configuration if the gadget that moves the bar holding the flap. Also when replacing the flap mechanism pay attention to how you put in the spring so it correctly puts tension so the flap closes.

@rickuztube 4 жыл бұрын

I have to say this is one of the best, if not the best, DIY repair videos I've watched. It was tricky at times, but the quality of the video and the steps shown were fantastic. Total cost of the repair, plus my time and a little aggravation, 19 cents. It would have been half that, but I bought two different length screws just in case :-). Thanks!

@grokshop 4 жыл бұрын

Thanks Rick!

@hellozonk9139 Жыл бұрын

I bought 3 screws for $0.41 :). Inflation

@stephaniesubacius0524 5 ай бұрын

Wow, i had no idea what was wrong with my ice maker, but after watching this I pulled off the panel and it was THE EXACT same issue. Thanks for this tutorial! Got my ice maker working in no time!

@nathanjones56 Ай бұрын

Thanks for this video! I was using a prop rod I made to hold the door flap shut for over a week. I finally decided to find out how to access this area. Found your video and it was the exact same broken post. Never would have guessed the panel would be clipped in like that.

@rspurgeon7804 2 жыл бұрын

I've had LG repairman out for 6 times. Could never get the icemaker working properly. Finally gave up and watched this video. Saved me a bundle. Great job. thanks for making it. appears to work fine now.

@Justakidin 2 ай бұрын

This was EXACTLY what I was looking for. I had the exact same issue. It makes me wonder if this is not a design flaw. Perhaps LG should have used 3/4" screws to begin with. Your video was well made, and you took your time and explained everything clearly. LG quoted me a repair cost of $400, well technically $399. Ha. Thank you so much!! Have a great one!

@jeffb5290 2 жыл бұрын

This is EXACTLY what happened to my fridge, and precisely the video I needed. Great tutorial; easy instructions. I didn't trust your #4 screws, and bought something closer to the size I was replacing. After figuring out why you used #4 screws, and a return trip to the hardware store, all is well. Thank you!

@petemoore9233 5 ай бұрын

Perfect video! Exactly what happened to my LG Refrigerator. I was shocked to finally get the panel off (I didn't break any tabs!) and see the screw was broken off from the back. Used your method and drilled out the old piece and used a longer screw. Works perfect. Thank you, sir, huge help!!!

@garytaylor9186 6 ай бұрын

I have an LG LFX28968ST/02 which is very similar. I spent a lot of time looking up this model and viewing YOUTube videos trying to find one that shows almost exactly what you've done here. Now I feel confident pulling my front panel out to get to the dispenser area. Excellent video. Thanks for your help!!!

@psychfish 7 ай бұрын

Oooohhhhh thank you! Flap wasn't closing and it was EXACTLY THAT SCREW. LG should have a recall on this! The only thing I'd add is that if you dare to try to superglue the broken plastic piece, you may end up with superglue on your hands, your tools, etc. 42 Cents, for a pair of screws of slightly different lengths. It's a bear to get the panel off, but the fix was just as you showed!

@michelleshirley6259 2 жыл бұрын

This was the exact fix I needed for my LG. Same screw post, same fix. 1 hour and $1.27 for the screws. You've saved me time and repairman costs. Thanks a million.

@TheSportcamaro87 10 ай бұрын

I am sharing this on Facebook strictly so people realize how nasty it gets back there. We just bought a house and found black mold in ours, your video was extremely helpful so thank you!

@kedamour 4 жыл бұрын

Thanks for the rundown. I’m excited to say that I only broke 2 tabs! They were two on the top. If you’re able to learn from my mistakes, just make sure you take the time to work out all of the tabs before yanking out the panel.

@jonmanna4533 3 жыл бұрын

Our Fridge is 6 years old and had the same exact problem. Unfortunately I wasn't able to get the panel off without snapping a couple of the tabs. Still saved me hundreds on a repair man or thousands for a new fridge. Thanks the walk through

@beerens20 4 ай бұрын

Thank you for this video. Our flap was stuck open, I followed your steps and discovered it was the exact same issue. Had it fixed in an hour including the Menards run for screws. Saved me a bunch of time and money.

@dreadful-twerp Жыл бұрын

This might be the best DIY video out there. Every necessary step shown, workarounds for inevitable contingencies, and more. The 3/4" #4 machine screws 5:00 were just the right size, too. Thanks!

@bryantjoeb1 4 жыл бұрын

Just followed the video and it’s repaired! Thank you Sir! Only problem I had was I couldn’t get the broken piece back on, but that doesn’t appear to be an issue, so far.

@RobertPoor 3 жыл бұрын

Thumbs up. This was the only video I've found that really explains how to remove the ice dispenser panel.

@steveavant9727 7 ай бұрын

Please add my name to the list of folks that your video helped! The problem was exactly what you described, with that broken post. Also a good tip to drill out the broken piece to allow the screw to pass through. The front bezel was a pain to get off but I finally got it, the rest of the fix was easy. Thanks again.

@charlesanddiannesibley5039 Жыл бұрын

Watched this video to find out how to make this repair.....gave us confidence and was exactly what we needed. Our icemaker is working perfectly again! THANKS!

@ShawnWhaley Жыл бұрын

This video is exactly what I needed to fix the same issue. You do a great job with the step-by-step. 1 million thumbs up!

@clintroberts587 Ай бұрын

Thanks so much for making this video. This was perfect for helping me fix our problem which was the exact same issue - the same plastic post broke. Works great now. Your video helped me get over the fear of taking things apart. Wasn’t bad at all. Bravo!

@brettschiftner4060 3 жыл бұрын

Great video. On mine, the “standoff” was split so I had to superglue it. Then 2 days after reassembly it broke off completely. Followed the video exactly and so far it’s great. Thanks very much!

@check2date 2 жыл бұрын

This was very helpful. I realized my unit was full of mold and wanted to get it clean. I would have never got it apart without this video. I was pulling really hard and it didn't feel like it would let go without breaking something. Finally it did "pop" and I continued to work it carefully. No broken tabs. I'm not sure the putty knife was necessary. Looking at the tabs, once it was apart, it looks like pulling straight out would have been the best bet. Thank you for doing the research.

@mdntblu 2 жыл бұрын

This was the fix for my flapper. Been broken for about 6 months and wife always complaining. Thank you so much for putting this together. Great tutorial. So happy to finally have a working flapper that doesn't let the air in there and freeze together all the crushed ice and it gets stuck.

@ebjr79 3 жыл бұрын

Huge help and was exactly what I needed. Thanks so much for putting this together and sharing. Super easy and quick. I actually spent more time cleaning/removing the mold than the repair itself.

@angelacen6518 2 жыл бұрын

Than for help me

@nathanp39 3 жыл бұрын

Had the exact same problem. Broken screw post preventing the flapper from closing. It was a real pain removing the panel and broke 3 clips. Lots of mold inside there too. Should be easier to remove for cleaning and repair. Used the longer screw as recommended and all is good. Thanks for a good, to the point video without any fluff and padding!

@emdgmd 7 ай бұрын

Thank you for posting this! My son and I fixed our refrigerator today following your guidance. Only cost me $0.13 for one screw at Ace Hardware! Thank you!!

@goodmanboattransport3441 Жыл бұрын

Thanks for the instructions, I've been thinking about digging into our refrigerator for weeks now, but didn't want to break it to find out how it comes apart. Same problem as yours, broken mount post. 👍

@williamlee5773 4 жыл бұрын

Terrific video, thank you. I repaired my 4 year old LG LMXS27626 ice chute door using this. I agree that removing the dispenser door was extremely difficult. I went very slowly, used far more force than I thought I would have to, and eventually got the dispenser out after about 45 minutes. All tabs were intact, somehow. I had prepared to repair the screw post as you demonstrated, but much to my surprise, my problem was simply that the opposite side spring was not installed correctly! Incredibly easy fix, once I got the dispenser out of the door. I suspect it came from factory this way. I have had occasional problems with ice/frost jamming the chute, but seemed to be happening much more frequently lately, and the COVID-19 quarantine finally gave me enough time to trouble shoot! Thanks again!

@rjpriz 4 жыл бұрын

Awesome video! I used this exact procedure to repair my LG LMXS27626. I did added a drop of superglue to the broken screw post to tack it on. Seems to have worked like a charm...hopefully it holds up to the torque of the motor and spring mechanism.

@sblair2506 4 жыл бұрын

Thank You for your explicit and detailed steps!! This is the Best repair video I've seen yet!

@bettermoonwalksofgeorgia3280 Жыл бұрын

Without a doubt, you saved us several hundred dollars by being able to make this repair, ourselves! Hooray to you for sharing this video!!

@moosenmobile31 2 жыл бұрын

Just, literally, did this for my inlaws fridge after watching your video. Fixed it! Thank you !

@katiekersey1916 4 жыл бұрын

Thank you! I had a different problem with the dispenser but your clear instructions and visuals help me fix it. Great video!

@albertkoscielny3739 Жыл бұрын

We have an LMXS27626S with this failure. I used a combination approach to removing the dispenser cover, first the putty knife to pop some tabs loose and then tugging a bit. It came loose after about 15 minutes. The same post was broken. The post and interior are black. I removed the retaining clip and the left spring came off while I was fixing the post, so I had to figure out how to reinstall the spring. Reinserting the dispenser is much easier than removing it. Great video, just what I needed. Thank you for putting it together.

@PerformanceMediaNZ 5 ай бұрын

This was brilliant thank you, you are a lifesaver! Was exactly the issue I had in our LG. Fixed now, and oh my wife now thinks I'm so amazing!!!! Thank you again.🤣🤣🤣

@hankv4723 Жыл бұрын

I never make comments about these videos but feel compelled to weigh in on this one. I followed the steps depicted here to a T. Discovered that the issue described here was exactly my issue. And the repair was easy and very doable. 2 things. For anyone counting or keeping score, I did break one tab. Also, long curved nose forceps are a handy tool to hold the stand-off in place while turning it to find the matching broken surface. Very useful video.

@seaclicks 3 күн бұрын

I can't wait to try this. My LG is 12 years old. The ice dispenser still works perfectly but the light stopped working. And when I shined a light up inside the chute, I was shocked to see all of the mildew. These disassembly instructions will help me to access the flap and other interior parts to clean them. I cannot understand how LG could make a product that cannot be easily cleaned. Do you have any tips of how to repair light that is supposed to come on when dispensing ice ?

@victorlongoria9424 3 жыл бұрын

This video was a huge help to my issue. I have another lg model that is similar to this style. After watching this video I was able to remove the water/ice dispenser just like the video tip. I cleaned it up and replaced the cold water water/ice lines. I definitely recommend this video for anyone trying to replace their water/ice dispenser line.

@JayrodPhil Жыл бұрын

Wow obviously LG needs to design a better hinge point on their ice dispenser flaps... thank you for a quick, direct to the point, step by step guide. As others have stated I had the EXACT same issue and your video saved me a lot of time and money. Great job

@mattkeilman4132 8 ай бұрын

Thanks for the great video. I had the exact same problem with the broken plastic post. This video saved me some money. Grand total of $2.79 spent on repairs!

@preetib3036 Жыл бұрын

This was the exactly what happened to our ice dispenser and this video helped me fix it without any issues.. You rock sir!

@Mavericknmaddie 3 жыл бұрын

Wow thank you so much!! I have been without ice for months. Finally went on here and followed your instructions. My problem was exactly what yours was. EXACTLY!. Did the fix and we now have ice. I only broke 1 tab! Thanks so much.

@VastOceanCommuter 2 жыл бұрын

I had the same exact problem with my LG LFX28968ST fridge. Your long screw method fixed it! Hardest part was opening the ice compartment from the door. Thank you!

@BcstEngineer 7 ай бұрын

I must thank Google for helping me find you. Terrific professional video and explanation. Very clear and right to the point! I don't need to be entertained by some fancy animation at the start. The video was very clear and stable and your audio was also very clear. I don't quite have the same problem. Mine has a sticky ice switch that is difficult to stop the flow of ice once triggered. Knowing what needs to be done to gain access to what is behind the switch panel will do it for me. Thank you!

@chichcnc 4 жыл бұрын

Wow. That would have to be the best no nonsence repair vid I've seen. Its even the same model as mine so im sure to get it right first go from the information in your vid. Well done!

@nang7411 2 ай бұрын

Excellent step by step video on the same issue I have. Unfortunately I am not that handy. Meanwhile I will have to resort to putting the ice cubes in the freezer drawer (ice maker still working). Later I will see if my son-in-law wanted to attempt the repair after viewing your video. Thank you!

@bodaggly 4 жыл бұрын

Same exact issue. Appreciate the video. Getting the panel off was a pain! I ended up putting tape on some needle nose pliers and a screwdriver to wedge open that top right corner. Once that was loose the rest came apart fairly easily. I would've been afraid I'd break something without your video so thank you!

@grokshop 4 жыл бұрын

Beautiful. Thanks for sharing your extra tip & for the positive feedback!

@xunilhr Жыл бұрын

This was my exact problem on my LFXS27566. Thanks. Saved me some money and only took 35 minutes, including cleaning. That was a design flaw to put in a screw half the length of the post. New screw is twice as long.

@monicamcdonald5715 6 ай бұрын

Perfect. Same break. Used #4 1inch stainless to fix. Added the shoegoo or goop for a little more hold. A+ video

@reindlg 4 жыл бұрын

Had exactly the same problem. Must be a design problem with this model, also happened after approx 5 years. I owe you a beer. Your video saved me probably $200+ repair bill if not more.

@grokshop 4 жыл бұрын

Interesting.. I was wondering how common this issue was. Other than this issue, ours has been a stellar performer. Thanks for the feedback!

@Acsantes73 3 жыл бұрын

Exactly the same for me, after about 5.5 years, this just happened to me! I've always had issues with the ice dispenser in this fridge. I will not be buying an LG fridge in the future.

@logicnetpro 2 жыл бұрын

Bravo! Thank you for this great how tutorial video. This turned out to be the same issue with mine... I appreciate strait forward explanations and the clear photos of the assembly parts. Took all of 1.5 hours including the thorough cleaning of all the parts. Work perfectly!

@maxwellrisch8961 3 жыл бұрын

Not the same part was broken on mine but your video gave me the step by step to get everything off, find the problem and use your idea of screwing through the plastic to fix the broken part. Thumbs up man.

@kenreece1268 Ай бұрын

Spot on information on how to repair this quickly. Obviously a design flaw on this make/model. Thank you!😀

@michaelserrone4069 4 жыл бұрын

Same thing happened to my LG fridge. Glued it with Bob Smith plastic epoxy (which is unbelievable for plastics) and we good to go. Thanks for the great advice!

@melpangborn5273 3 жыл бұрын

Worked like a charm. I removed to clean up the black mold and to repair the rust that had started under the dispenser. All tabs remained intact and my fridge looks almost new again.

@pauld130 3 жыл бұрын

Thank you for taking the time to create this very clear and concise video. I'm seeing this video AFTER having an LG service tech visit my home three times to repair the ice maker. The problem I'm having appears to be a flap that is not sealing tightly. It open and closes when activated. This is causing water to periodically dribble out of the chute. It was a similar problem we had with a Samsung refrig in which the Samsung tech just replaced flap assembly unit - problem solved. I explained this to the LG tech and said the problem was with the ice maker - which he ordered and installed. Knowing how the flap assembly works will hopefully help me recommend to the LG tech, who I'm getting to know pretty well, to replace it. LG - Life's Good! (only when your appliances are working correctly)

@subsonix1980 11 ай бұрын

Had this EXACT problem. Took me like 15 minutes to fix it thanks to your video!

@halebent 4 жыл бұрын

Same exact issue with mine (broken screw post) Thanks for the how-to as it made for a quickish fix!

@markochenduszko1868 3 жыл бұрын

I used this video to guide me through replacing the entire dispenser. The video is perfectly accurate. I first removed the door handle, it is held in place by a set screw with a hex head at each end. Remove the front dispenser carefully using a putty knife wrapped in painter’s tape so you don’t scratch the front of the refrigerator. I also placed painter’s tape on the stainless steel door face surrounding the dispenser to further insure I didn’t scratch the refrigerator front surface. All seven electrical connectors are unique so you can’t misconnect the new wires. Pull apart each connector carefully with your fingers, some have a snap fitting to hold them together. I had to use a pair of needle nose pliers to separate the smallest connector. After reconnecting all the wiring, simply snap the new dispenser in place. Tools required- hex head tool, putty knife, painter’s tape. Easy peasy- 20 minute job.

@kickofftheboot Жыл бұрын

My LG fridge is broken, the exact same way. This video was perfect to help me fix it.

@rkline5369 2 жыл бұрын

This was very helpful ! I expected to find a broken post like shown here, since my symptoms were identical. The screw post was not broken, things just seemed to stick. I took a cue tip with a little silicon spray and lubed the white lever and points were it interacts with other components. This seemed to work...at least for now. It does look like the white rod starts to deform over time, so maybe down the road that will need to be replaced. Getting the panel out was a hassle. I tried the "pop out" method I saw elsewhere, but that didn't work for me ( or I am too faint of heart ). I did manage to pry it out without marring the finish. Thanks for linking to the manual - nice to read that even the pros break a few clips and that it's "SOP"

@bernarddaus6566 3 жыл бұрын

Thank you. Awesome video! I had the same issue with the ice flap and the root cause was the same. I (krazy) glued the plastic base together with a wood tooth pick inserted in the center to guide the alignment. I drilled the toothpick out after the glue dried. I still used a slightly longer #4 stainless steel sheet metal screw. I had the repair done in 20 minutes. The longest part(s) was the trip to the hardware store and the cleaning of the interior components (moldy). Two tabs broke but it snapped back in fine.... like new.

@NdeCarvalho 3 жыл бұрын

Thank you so much for posting this fix. You may have guided me towards the solution for replacing just the LED panel cover (mine got damaged due to humidity dark spots). However, as you pointed out, replacing it is almost prohibited, as I cannot manage to open the cover to replace it . So simple, yet so hard to reach for an opening...There is the risk of damaging the edges of the control panel itself while trying to reach for the cover, hence creating another bigger monster. I will try to find someone that could help me, and will save your detailed video as a DYI guide. Many thanks again!

@hellozonk9139 Жыл бұрын

My LG is about four years old and exact same failure. Thank you so much for the video. Clearly a design flaw.

@daviddoerries8389 2 жыл бұрын

Thank you so much for making this video! My LG fridge, which is a similar model, had the exact same problem with the broken screw post. This helped me fix it in no time!

@johngallimore7390 4 жыл бұрын

Excellent video and well made. Your instructions were very clear and I now know how to get the dispenser off my LFX21976ST model to diagnose a similar problem - flapper stuck open. Thank you for the video.

@grokshop 4 жыл бұрын

Right on; thanks for the feedback :O)

@Quince828 3 ай бұрын

Thanks for showing how the dispenser is disassembled. My issue isn’t a stuck flap but the ice chute and water controller have completely disintegrated. Went to get ice and small screws and springs flew everywhere! If I can get replacement parts it looks like they’re easy enough to replace. Otherwise I’m shopping for a new, non Korean built fridge.

@matthewfrank1878 Жыл бұрын

One of the BEST instructional videos I have ever seen. Well done!

@markfreedman2470 4 жыл бұрын

Excellent: A very professionally performed repair.

@wmccutch01 Жыл бұрын

Thanks! I used this a reference and had the exact scenario. Fixed it, and it works great. I popped the flapper bar off, and struggled a little with the springs.

@grogkolb3685 3 жыл бұрын

Thank you so much for this video and tips!! It is exactly the same problem I have. I would not have been able to do it without your help. Excellent video and detailed explanation, it is a wallet saver!!!

@susanmcpherson2251 2 жыл бұрын

This video saved my bacon and money. I did exactly what you said to do and it worked. Thanks so much.

@GaryTaylor-no9my Жыл бұрын

Video was perfect! Drilled out the broken piece bought a longer screw. I also was able to use your video to see how the water parts go back. Thanks so much!!

@sprntkr 3 жыл бұрын

Another thankful watcher here. You walked me right through it. Although, I did try the super glue method and we will see how it holds up!

@giuseppe8844 3 жыл бұрын

Greeting from Australia. I had to fix the ice controller button which had broken and this video was helpful with that task as well as I could see the process for disassembly as well as the switch spring location in the background. A+ thanks!

@XAERODUDEX 3 жыл бұрын

Thank you, just fixed my flapper. Opened it up and it looked exactly like yours. Wife is happy.

@mdelapi 3 жыл бұрын

Wanted to say great video same issue did what you demonstrated, lost only 2 tabs as predicted used longer screw cleaned Inside and now works like a charm and saved me $$$$ in repair bill keep up this videos and thx again

@Saltyscientist 3 ай бұрын

Great video, exactly the same problem I had Thanks! Tip: I used automotive door/dash trim removal tools, worked like a charm with no broken tabs.

@romanorozco6764 2 жыл бұрын

Congratulations on your video ..! I looked a lot but couldn't get that ice maker out. Thanks to you I was able to know how to remove it ..! I am from Venezuela I don't speak English but I understood when I saw his video how to get it out. In fact, I translated this letter to send you a cordial greeting and to express my gratitude to you .. !! A thousand blessings..!!

@grokshop 2 жыл бұрын

Awesome. This makes me happy :)

@LmV-Customs Жыл бұрын

OMFG I Could not figure out why my ice door wasnt openening you saved me time and money!!

@jimmert5107 3 ай бұрын

Excellent advice and video. I fixed mine in about an hour. So far so good. Thanks again!!

@sharonlarosa8151 3 жыл бұрын

This video was excellent. Now just waiting for a part!

@davidonstott91 2 жыл бұрын

Hey - Great video, helped immensely. The broken post on our LG wasn't useable, so I tried a longer screw without the post, and it works fine. Broke one tab (on the bottom) but didn't seem to affect the reassemble. Thanks!

@jview70 3 жыл бұрын

Excellent video. Really helpful to get assembly out without breaking plastics latches. I could see how to disassemble easily from this video.

@miles0823 2 жыл бұрын

I had literally the exact same issue with my LG....this fixed it and saved me a bunch of cash....thanks!

@St3v3n1sm Жыл бұрын

Thank you for this! I have a slightly different model -- LFXS24566S. I can confirm that this model has the same design flaw and the fix was identical to your instructions. Great job!

@MrUgot2bkiddingme 3 жыл бұрын

Thank you so much… we have been so frustrated with our LG refrigerator ice maker we were ready to just replace the entire refrigerator… (yes I know a bit excessive of a reaction) Well now we have a functioning ice maker and all is well in the home. Well until the next time an appliance decides it’s time to break again.

@user-xm5zm1db4g 3 ай бұрын

Awesome Rick! This turned out to be my exact problem! I couldn't have done it without this video.

@rodimirogarcia 2 жыл бұрын

Thank you for taking your time and create this video. Specially when fast forwarding while doing what you just explained as opposed to jumping ahead.

@treeguy2010111 2 жыл бұрын

Thanks for the post. Different model fridge but same in door ice maker. Exact same problem. Screw post broken. Followed your instructions and had it fixed quickly. Many thanks for taking time to post this fix.

@jaimeguevara9980 5 ай бұрын

Great video I was able to fix mine by following the steps and purchasing the screws. Back in business. Thank you!!

@abceverhart 4 жыл бұрын

I agree, " best no nonsense repair video I've seen" in a while. Thx

@QuintJer 2 жыл бұрын

Excellent video and nice narration. I have a similar issue although my issue appears to be more with the water dispenser. I think I will tackle this tomorrow. Thanks again!

@benreece2714 7 ай бұрын

My same problem. Great video, very helpful. LG customer service couldn't tell me how to repair.

@YogurtGun Жыл бұрын

You did a great job with this video. Got right to the point without long drawn out chatter and editing the disassembly process with quick motion(I hate watching guys take screws out in real time) Getting ready to do this repair now.

@grokshop Жыл бұрын

lol @ real-time screw extractions. Thanks so much & good luck!