GROMMETS - HOW TO SET GROMMETS IN LEATHER

GROMMETS - HOW TO SET GROMMETS IN LEATHER - (ALL ABOUT GROMMETS)

Рет қаралды 26,394

2 жыл бұрын

**PLEASE NOTE: I have been Judged! LOL Thank you for those noticing I used an anvil to use the grommet setter.. DO NOT USE an ANVIL OR STEEL, This was a ONE TIME DEMONSTRATION as I did a QUICK Video and the cutting board was not close by.. I grabbed what I had at the moment"
NO TOOL OR AVIL WAS DAMAGED during this video.
For those of you who made negative comments I received, I say THANK YOU, because then I know you are watching and paying attention..
Learn about different sizes & types of grommets as well as the tools needed to set grommets and I demonstrate the easiest way to set a perfect grommet in leather, but also applies to other fabrics as well.
Hopefully these tools and tips will help you with your next project or projects.
SUPPORT MY CHANNEL BY... any of these... LIKE, SHARE, SUBSCRIBE :)
Go to my website to see more services & products
theleatherladyll.com
Like Share and Subscribe if you like this video and see more video's to help you at
my KZfaq channel at
/ @theleatherladyllc
#leather #grommets #howtosetagromment
Learn the different types of grommets as well as how to set a grommet. Hopefully these tools and tips will help you with your next project or projects.
Go to my website to see more services & products
theleatherladyll.com
Like Share and Subscribe if you like this video and see more video's to help you at
my KZfaq channel at
/ @theleatherladyllc
Comments and feedbacks are always welcome and if you would more information, or see my ONLINE STORE,
please go to my website.
WEBSITE: theleatherladyllc.com
FACEBOOK: / theleatherladyoregon
INSTAGRAM: theleatherladyllc
EMAIL: theleatherladyllc@gmail.com
Comments and feedbacks are always welcome and if you would more information, or see my ONLINE STORE,
please go to my website.
WEBSITE: theleatherladyllc.com
FACEBOOK: / theleatherladyoregon
INSTAGRAM: theleatherladyllc
EMAIL: theleatherladyllc@gmail.com

Пікірлер: 37

@shawnchoate6300 5 ай бұрын

YOU are adorable! Love your videos because you explain everything clearly AND you have a sense of humor!! Thank you!

@TheLeatherLadyLLC 5 ай бұрын

Thank you so much.. learning a new skill shouldn't be boring... it should bring on a passion. Thank you for watching my video. :)

@TheLeatherLadyLLC 5 ай бұрын

thank you... Learning should be fun, but I always have been a class clown .. thank you for watching my videos.. another one coming up tomorrow :) keep watch.. More comedy to come about me hammering on an anvil from the grommet video. LOL

@JohnValencia70 2 ай бұрын

Cool 🙏

@jesspeak7543 Жыл бұрын

Thank you, just the information I needed for my doggy pouches.

@TheLeatherLadyLLC Жыл бұрын

you are very welcome and I am happy it helped :)

@hansvantonder875 Жыл бұрын

Love this tutorial!

@DivineWarriorIntuitive Жыл бұрын

Thank you, I do love teaching 🙏🏻😁

@patienceamankwah6034 Жыл бұрын

Thanks ♥️

@rickyserna1734 8 ай бұрын

Thank You

@TheLeatherLadyLLC 8 ай бұрын

you are very welcome. :) Patti

@johnr5545 Жыл бұрын

Thanks god bless

@TheLeatherLadyLLC Жыл бұрын

Thank you for watching, I hope it helped 😁

@rxsullivan 5 ай бұрын

Digg this video. Thank-o!

@TheLeatherLadyLLC 5 ай бұрын

Glad you enjoyed... Thank you

@Anhidema 2 ай бұрын

You can use soldering iron to make holes to almost anything

@TheLeatherLadyLLC 29 күн бұрын

yes true, just make sure if using fabric that the fabric is not flammable or can uphold due to the heat

@angeladaniel209 10 ай бұрын

Nice video. I have a question: I brought the brads with no washers. Can they be used without washers, plan to use on card stock???

@TheLeatherLadyLLC 10 ай бұрын

Hello, unfortunately you need both pieces to make a grommet work. I am sure you could use them on a card stock if the card stock is heavy enough as otherwise it may just rip right through it. If you have any other questions please don't hesitate to email me at theletherladyllc@gmail.com. Good luck with your project :)

@nancywaldrop2943 Жыл бұрын

how about sheep skin? I bought a hide to make seat saver.?

@TheLeatherLadyLLC Жыл бұрын

yes you can do this with sheepskin too. You may have to trim around the grommet a little once the grommet is set

@rrwwdonato 11 ай бұрын

Patty, thanks for the great video on grommets. Please explain which side of the washer faces outside at 10:45 time stamp. You went too fast at this point without clarification. Thanks.

@TheLeatherLadyLLC 11 ай бұрын

there are 2 parts to a grommet. The part that has sides to it (looks like a volcano) lol... then you have the FLAT round piece. the grommet piece with the SIDES IS YOUR TOP (volcano piece). so you want the FLAT piece INSIDE what ever you are working on. I hope that helpped. Thank you for the question.. I love people asking or sharing. My quality isn't very good on the video.. but hoping to get new equipment in 2024 :)

@rrwwdonato 11 ай бұрын

@@TheLeatherLadyLLC Thank you for much for your explanation. This helps tremendously. Looking forward to seeing more videos from you.

@tsakiree Жыл бұрын

Thank you

@mazbez Жыл бұрын

Which way up does the washer go please?

@TheLeatherLadyLLC Жыл бұрын

The long piece should face down to the INSIDE where you don’t want to see the ugly side

@SuperHyperExtra Жыл бұрын

I think the question was should you put the flat washer rounded side up or down. Thanks!

@SuperHyperExtra Жыл бұрын

I think the question was should you put the flat washer rounded side up or down. Thanks!

@geraldinerabey324 6 ай бұрын

I can’t believe that you punched your hole ontop of the metal anvil. That is a sure fired way of damaging your tools.

@TheLeatherLadyLLC 6 ай бұрын

You are correct and Thank you for the judging me... I have mentioned In the video and other videos explaining to WHY I was using it this one time...and that it isn't a common way. Thank you for sharing your opinions...

@sloth_e Жыл бұрын

Are you hitting a hole punch into a metal surface? 😮😮

@TheLeatherLadyLLC Жыл бұрын

yes in fact I am. 🙂 I have used wood, a pounding board, Cutting board or even yes metal metal for over 20+ years.. NEVER had an issue as I also know how to sharpen my tools. It is important for me teach in many ways for people to be able to use what they have at home if needed and not to have to spend a ton of money. There are many ways to do leather work not just one. Thank you for your comment.

@trevormitson6026 Ай бұрын

Too many words

@TheLeatherLadyLLC Ай бұрын

thank you...will note that, :) others have mentioned they like the authenticity..

@trevormitson6026 Ай бұрын

@@TheLeatherLadyLLC I just found it confusing. Cheers

@TheLeatherLadyLLC Ай бұрын

@@trevormitson6026 well thank you, I will definitely pay attention to my explanations. If there is ANYTHING I can help you with so you can get a perfect grommet please reach out to me at theleatherladyllc@gmail.com