Brushless motor BL A1504 Outrunner 2200 KV 9g 12 A ESC BL FLY-12A LiPo 2s 450 mAh 2/26/50 C 4 x Servo TowerPro SG-50 Micro 5g Prop GWS 5x3
Пікірлер: 23
@angelreading50985 жыл бұрын
You have done a good practical installation,well done.
@badbikerboy19749 жыл бұрын
hiya mate, absolutely brilliant job, im currently working on a piper cub myself and im thinking of converting it.
@sonex4136 жыл бұрын
Beautiful job!
@dumpling79 жыл бұрын
Great conversion. I am starting mine soon. Cheers
@kaoquan9 жыл бұрын
Thanks soon i will finish mine but i'm think i will need a bigger motor
@P8FPV5 жыл бұрын
Great work bro 👌👍😊
@yourselfdotcom4 жыл бұрын
Sweet build
@jackylin68115 жыл бұрын
How much does it weigh in total
@bassinbob19656 жыл бұрын
I think you did a great job building this kit. I have always wanted the Zero. There ia so much conversion info on the net. Where do you recommend I can go to as a beginner.
@kaoquan6 жыл бұрын
I watched others who they did the conversion, but came up with everything in the process of building :), always thinking ahead. First build your kit and then see what will you need for the conversion the motor size, esc and servos. :)
@pixelu63246 жыл бұрын
Hi ! Nice conversion I like it very much ! I am a newbie and i would like to know how to you make the hinge between the control surfaces and the model ? Is it like a door hinge or something more complex ? thank you
@kaoquan6 жыл бұрын
Hi, for the elevator and rudder i use somthing like this: www.ebay.com/itm/10pcs-Nylon-Plane-Hinge-for-RC-Airplane-RC-Airplane-Plane-Parts-Replacement-HC/332406447381?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D41376%26meid%3D85025370866841f99a0393b81c61f7c0%26pid%3D100005%26rk%3D5%26rkt%3D6%26sd%3D322416055941&_trksid=p2047675.c100005.m1851 and for the for the allerons i used an wire as axis hope it helps.
@pixelu63246 жыл бұрын
Thank you it helped a lot !!
@zagaty9 жыл бұрын
Great,may you share your propeller info please,I'm still not sure what to use with this motor,I'm building a p40
@kaoquan9 жыл бұрын
Hugo Z pe propeller is a GWS 5X3 3 blade www.amazon.com/Waltzmart-5030R-3-Blade-Propeller-Quad-Copter/dp/B009NP4AYU
@zagaty9 жыл бұрын
kaoquan thank you!!!
@edwardeverson70394 жыл бұрын
Se5a !
@jackylin68115 жыл бұрын
Hey. I was wondering about the process you did with the leading edge in the wing. I can’t seem to get it curve well. Any advice?
@kaoquan5 жыл бұрын
I used sand paper with my hand on a square balsa wood. You wrap the sand paper around the wood to sand down only 2 corners. You can get to the shape you want very fast. Careful like this you will have a round edge and you need it to shape the edge to the wing. I advice you to do the sanding when the leading edge square wood is glued in place and you have the hole wing all together. It is easier to sand down to shape when you see it in it's my place
@jackylin68115 жыл бұрын
One more thing. How did you build the bottom of the fuselage so that the wing would be screwed on?
@kaoquan5 жыл бұрын
@@jackylin6811 this weekend I'm gonna make a short video for that then