Gun Restoration, Old Model Ruger Revolver

Рет қаралды 3,037,520

3 жыл бұрын

#restoration #revolver #thekinzlerbros
Gun restoration, old Model Ruger revolver. Welcome to our third restoration of a firearm. We are getting better with each one we do, we look forward to more in the future. Links for Magnets, Merch, and to Donate to the channel are below. Thanks for watching!
^^^MERCHANDISE^^^
teespring.com/stores/the-kinz...
Pay Pal account, paypal.me/thekinzlerbros?loca...
BRUTE MAGNETICS PRODUCTS:
-brutemagnetics.com/
-10% DISCOUNT CODE: TKB10
^^^COMBO BUNDLES^^^
-Brute box junior 300 LB Single Sided Bundle:
brutemagnetics.com/collection...
-Brute box 880 LB Single Sided Bundle:
brutemagnetics.com/collection...
-Brute box 1,200 LB Single Sided Bundle:
brutemagnetics.com/collection...
-Brute box 1,200 LB D ouble Sided Bundle:
brutemagnetics.com/collection...
-Brute box 2,600 LB Double Sided Bundle,
brutemagnetics.com/collection...
-Brute box 3,600 LB Double Sided Bundle,
brutemagnetics.com/collection...
^^^DOUBLE SIDED MAGNETS^^^
-550 LB Double Sided Magnet:
brutemagnetics.com/collection...
-800 LB Double Sided Magnet:
brutemagnetics.com/collection...
-1,200 LB Double Sided Magnet:
brutemagnetics.com/collection...
-2,600 LB Double Sided Magnet:
brutemagnetics.com/collection...
-3,600 LB Double Sided Magnet:
brutemagnetics.com/collection...
^^^SINGLE SIDED MAGNETS^^^
-300 LB Single Sided Magnet:
brutemagnetics.com/collection...
-575 LB Single Sided Magnet:
brutemagnetics.com/collection...
-600 LB Single Sided Magnet:
brutemagnetics.com/collection...
-880 LB Single Sided Magnet:
brutemagnetics.com/collection...
-1,200 LB Single Sided Magnet:
brutemagnetics.com/collection...
-1,500 LB Single Sided Magnet:
brutemagnetics.com/collection...
-2,000 LB Single Sided Magnet:
brutemagnetics.com/collection...
-2,100 LB Single Sided Magnet:
brutemagnetics.com/collection...
^^^BRUTE ROPES^^^
-65ft double nylon braided rope
brutemagnetics.com/collection...
-65ft heavy duty double braided rope
brutemagnetics.com/collection...

Пікірлер: 3 500

@ProjectRescues 2 жыл бұрын

Finally! A magnet fisherman who actually keeps the guns and restores them. Instant subbed! Keep up the good work! Excellent restoration!

@TheKinzlerBros 2 жыл бұрын

Thank you very much we appreciate you watching and your support

@moistexistence3090 2 жыл бұрын

@@TheKinzlerBros I’d say this was very entertaining and interesting. Glad the gun didn’t explode in your face but in general the Ruger Blackhawk is a very strong action.

@luke8222 2 жыл бұрын

I'm happy too. I think that usually the guns are tied to someone else and that is why people can't keep them.

@disacramento_music 2 жыл бұрын

True

@BkillerxxD 2 жыл бұрын

I thought exactly the same thing, instant sub, greetins from Brazil

@knotwilg3596 2 жыл бұрын

Looks like a genuine find and restoration, unlike the 95% on YT where the screws miraculously come out like a charm and the reassembly happens as if no material ever deforms when left to nature.

@TheKinzlerBros 2 жыл бұрын

Thank you very much we appreciate it, ya most of the guns on KZfaq were not underwater for years, thanks for watching

@swapmeetlus4096 2 жыл бұрын

I once saw a video where plastic parts had rust lol

@markolysynchuk5264 2 жыл бұрын

Well, the main thing is to show the restoration process, so it doesn't matter that was this gun under water or not

@knotwilg3596 2 жыл бұрын

@@markolysynchuk5264 I'm not an expert, but as a viewer I do value authenticity.

@DakovP Жыл бұрын

another reason why when I watch like general restoration, I only watch 'My Mechanics"

@davidrodkey3522 2 жыл бұрын

Invest in a heated ultrasonic cleaner, you will LOVE IT ! This Ruger was a prime candidate for a good Cerokote . Great job !

@TheKinzlerBros 2 жыл бұрын

We will, thanks for the advice, ,ya we are learning new things all the time, thanks for watching

@AaronBelknap Жыл бұрын

What a great find! What a relief the gun wasn't tied to anything and the police gave it back to you guys! That restore turned out awesome!

@TheKinzlerBros Жыл бұрын

Yes it was, thank you very much we appreciate you! Thanks for watching

@daniel_ryan Жыл бұрын

You do wonder who leaves a loaded gun with two empties in water.

@chiefcaptainmoroni1 2 жыл бұрын

Tip from someone who likes to restore guns. You did a great job bringing it back to life.

@TheKinzlerBros 2 жыл бұрын

Well that is actually a nice thing for you to say a lot of people really hated on me for this restoration but I like to specify that I am a total rookie when it comes to restoring firearms I have a lot to learn and I’m willing to learn I just make a few mistakes along the way that’s kind of how we all go about doing new things thank you for watching

@cardo718 2 жыл бұрын

@@TheKinzlerBros I do not understand why anyone would hate on you for bringing that Ruger back to life. You did good.

@joshuataft5541 2 жыл бұрын

@@TheKinzlerBros you did good.. some are to lazy to do it ...I love guns so much even if it was brike I'd use it as decor

@jimmywallace2782 2 жыл бұрын

While some may refer to it as "The 5 round" rule it's actually the "Don't rest the hammer on a live round" rule. Loading 5 is just as dangerous as 6 if you're not on the empty chamber. Awesome that you have an old school Ruger for a fraction of the cost + some elbow grease. Great video!!

@TheKinzlerBros 2 жыл бұрын

That is a great point, Ya we love it, thanks for watching Jimmy!

@paulsegnatelli55 2 жыл бұрын

Saw that as well. When loading. Load one. Skip one. Load four. Bring gun to full cock and lower hammer on to empty chamber. Which if u did the procedure correctly will be the aligned chamber.

@cyrusbaker3551 2 жыл бұрын

Not a single six but a Blackjack, three-screw (before 1973).

@PLAZALOT58 2 жыл бұрын

@@TheKinzlerBros nice find When turning the cylinder, always have the hammer resting completely in the half cock notch/position . That way the cylinder bolt (that locks the cylinder) will be all the way down inside the frame, and will not scratch a ring around the cylinder and beat up your cylinder notches. Then bring hammer all the way to full cock and pull the trigger while lowering the hammer. Also keeps the gun in time. This applies to Colts SAA as well as Ruger three screw single actions. Blackhawks are tough guns. Congratulations!

@yandan7010 2 жыл бұрын

Pointing it all and any way possible then hitting it with a hammer though, cool! 👍🏻

@tombarlow6176 Жыл бұрын

Beautiful restoration of the old revolver

@TheKinzlerBros Жыл бұрын

Thank you very much!

@tomwikum7001 Жыл бұрын

I own a ruger blackhawk in .357 mag. To me its one of THE best revolvers to use.

@TheKinzlerBros Жыл бұрын

Yeah absolutely it is a great revolver thanks for watching

@Koohwipx 2 жыл бұрын

Best restoration I’ve ever seen. Really enjoyed someone actually talking and explaining things

@TheKinzlerBros 2 жыл бұрын

Thank you very much Joshua, we really appreciate your support, thanks for watching

@mr31337 2 жыл бұрын

Nice work! You took a rusty, old pos ruger and turned it into an old pos ruger.

@TheKinzlerBros 2 жыл бұрын

Yup and it was free and I have made plenty off this video so it was still worth it for the experience. But thanks for watching.

@mr31337 2 жыл бұрын

@@TheKinzlerBros the parts were free were they? that's awesome

@Chiller1967 2 жыл бұрын

Thanks for rescuing this firearm

@TheKinzlerBros 2 жыл бұрын

Thank you very much for watching

@irafowlerjr.7492 7 күн бұрын

Watched again, thanks ❤

@TheKinzlerBros 7 күн бұрын

Thank you!

@roberthenson8610 3 жыл бұрын

Quick smith tip if you want a better blue try slightly warming the metal with a torch or heat gun I know it says cold blue but a lil heat makes the blueing agent take deeper and better

@TheKinzlerBros 3 жыл бұрын

yes i saw this in another video but i do not own a heatgun or blow dryer

@bobsradio6025 3 жыл бұрын

@@TheKinzlerBros - Try your wife's hair dryer.

@DomRivers67 3 жыл бұрын

Yeah, get the heat gun on the cold blue after a couple of minutes and liven it up after a good heat up, with WD40 I find works too, do that a couple of times then a good wash in bicarb and dry it before a coat of Ballistol Much better than a straight cold blue.

@PAPA-JC 3 жыл бұрын

I love watching these videos of weapon restorations, mainly the old types used in western movies

@TheKinzlerBros 3 жыл бұрын

awesome thanks for watching our video we appreciate that

@carrestore 2 ай бұрын

Beautiful restoration

@TheKinzlerBros 2 ай бұрын

Thank you very much!

@Dbusdriver71 2 жыл бұрын

What a sweet find! I have a security six so I know these were some of the best pistols Ruger ever released. As its a Ruger, you can load 'hot' loads without any worry versus a colt pistol. Great find!

@TheKinzlerBros 2 жыл бұрын

Ya we are very happy with it, they are definitely great revolvers, thanks and thanks for watching

@LarryDeSilva64 3 жыл бұрын

Good demonstration of taking a single six completely apart and putting it back together.

@TheKinzlerBros 3 жыл бұрын

thanks for the compliment, and for watching Larry

@tbjtbj4786 3 жыл бұрын

I think that was a Blackhawk not a single six. It looked to center fire nir rim fire

@mariatravisano1669 3 жыл бұрын

#i love that shr t

@AceOfSpad3es 3 жыл бұрын

@@tbjtbj4786 was definitely a Ruger Blackhawk chambered in .357 Magnum as opposed to a Single six, I know as i own 1 of each, but also says it right on the frame where you can see during disassembly.

@jessesaxberg757 3 жыл бұрын

This is absolutely incredible guys!! What a crazy find, especially on the first toss out at the reservoir! And then to be able to get it back after turning it into the cops, which was the right thing to do, after basically half a year. Then to top it all off, you guys did a fantastic job showing the restoration process and the gun turned out absolutely beautiful. Super proud of what your channel is turning into and can’t wait to see more of these restoration videos with finds you guys pull up while out magnet fishing! Also, a huge congrats on 10,000 subscribers and the over 1 million views on the channel!!! Much love from me and I will continue to be here to support you guys and join you on more magnet fishing adventures in the future! Yeet!!!

@TheKinzlerBros 3 жыл бұрын

thanks Jesse i hope you own a kayak because we are going to yak the rivers now too because they will have stuff all throughout because of floods and people live on the river

@darkhoursofday6250 2 жыл бұрын

Amazing to see all the changes. My favorite handgun that I own is a 357 New Vaquero with cherrywood grips. This is like my guns grand-daddy. It's a lot easier to disassemble the newer models! Great video!

@TheKinzlerBros 2 жыл бұрын

Thank so much for watching

@darkhoursofday6250 2 жыл бұрын

@@TheKinzlerBros Thanks for the great content!

@njh4473 2 жыл бұрын

Great job on the restoration that’s absolutely a great find. Keep up the good work.

@TheKinzlerBros 2 жыл бұрын

Thank you so much we really appreciate that

@CharlieWhitewolf 3 жыл бұрын

Finally found someone that restores the guns they find in the waters. Definitely subbing.

@TheKinzlerBros 3 жыл бұрын

We are happy that you have joined the team, thanks for watching

@donhalley5622 3 жыл бұрын

KZfaq recommended this video, so I watched it. Almost couldn't wait to see the comments - but I did. So much of this work caused me mental pain. Take some time, watch some other videos. I'll be interested to see if you get some additional gunsmithing skills as time goes by. Thanks for sharing.

@TheKinzlerBros 3 жыл бұрын

Thanks for watching Don and not being to critical of the video. we are learning and getting better thanks for the comment

@jeremyedgell9989 2 жыл бұрын

Awesome Guy's!! Such a cool find and restoration!! So glad you showed every one the safety in firing this gun for the first time in a very long time. You never know the reason the gun wound up In their or any thing about a gun this old. Very cool. So glad y'all found it and gave it the love and respect it deserves.

@TheKinzlerBros 2 жыл бұрын

Thank you very much Jeremy we appreciate all the kind words, thanks for the support and for watching

@wayneandrus307 2 жыл бұрын

I love these restoration videos. This man knows a lot about guns and restoration. Good Work!!

@TheKinzlerBros 2 жыл бұрын

Thanks Wayne we really appreciate that, thanks for watching and for the positive feedback

@TheMichiganMagnetMan 3 жыл бұрын

It was so cool to see the finished product shoot. Great video guys! 🔥

@TheKinzlerBros 3 жыл бұрын

Thanks buddy, ya it was awesome to bring it back to life!

@rg20322 2 жыл бұрын

Send the restoration video to the Police force that sent it back to you.

@cliffmiller1021 3 жыл бұрын

I've been waiting for this video for a good minute! It was totally worth the wait. Thanks so much for the content. Waiting for more.

@TheKinzlerBros 3 жыл бұрын

i know i was waiting and working on it for awhile, thanks for your patience

@curtismiller8529 3 ай бұрын

Good job, my respect to you.

@TheKinzlerBros 3 ай бұрын

Thanks we appreciate it!

@johnbennett7244 8 ай бұрын

Good video. Good job.

@TheKinzlerBros 8 ай бұрын

Thank you very much

@Matt-ze3oo 3 жыл бұрын

nice job ! saving a piece of history !

@TheKinzlerBros 3 жыл бұрын

thnk you very much for the nice comment, and for watching Matt

@jamesamadio3049 3 жыл бұрын

That is an old model blackhawk made in 1969. Good find. I have one from 1967 its the pride of my collection. Edit I only made it halfway before looking up the serial number for the year it was made. Lo and behold at the end you guys already knew that. 🤣

@TheKinzlerBros 3 жыл бұрын

awesome that is cool, thanks for commenting

@davidnice9216 3 жыл бұрын

I to have a 3 screw flattop in 44mag. Manufactured in 1960. My Dad bought it brand new at the local western auto store for $80 in 1962 and ordered a holster from Edward Boland leather works in Hollywood Cali. It's is also my pride and joy. I have a tank of a revolver I also have a family heirloom to pass to my youngest daughter. ( she loves to hunt, fish and shoot ).

@bobsradio6025 3 жыл бұрын

@@davidnice9216 - I have a Super Blackhawk that I bought new in 1965, and it is much nicer than the two New Model Blackhawks that I also own. The Super Blackhawk used to be available with a brass grip frame, and they also sold them separately. I found 2 in a store for $16.50 each and bought both. When I get to it, one is going on my Super Blackhawk and he other may get modified to fit one of my newer Blackhawks.

@bobsradio6025 2 жыл бұрын

@My Dixie Wrecked - The first time I fired my .44 Mag Super Blackhawk it made me realize that I needed to learn how to handload. The lightest load in the handloading manuals recoils like a .22 RF, and there are many loads between minimum and maximum. The Redhawk is double action. The single action Super Blackhawk has a very long, non checkered grip that simply rolls back in your hand. I added a set of Herretts Shooting Star grips which made the grip even longer. Of course I got the non checkered grips. Double action revolvers used to be popular with the police because of the use of speed-loaders, but there is no need for a magnum hunting revolver to be double action.

@jthompson1982 2 жыл бұрын

This is awesome! Love the job you did on restoring the gun. What a find!

@TheKinzlerBros 2 жыл бұрын

Thank you very much we appreciate the nice comment

@vibrantvideos6789 3 жыл бұрын

Awesome job. I love those old guns.

@TheKinzlerBros 3 жыл бұрын

Thanks, ya they are sweet! thanks for watching

@jorgecastello1021 3 жыл бұрын

Gran hallazgo, excelente restauracion, muy buena arma, muy buen video. 💪💪🇺🇾🇺🇾🇺🇾🇺🇾

@TheKinzlerBros 3 жыл бұрын

Thank you very much it was quite the challenge we were novice gunsmith errs but we turned out to get it done and be able to fire it which is awesome thank you

@b.santos8804 2 жыл бұрын

Someone really *did* lose their gun in a "boating accident!"

@TheKinzlerBros 2 жыл бұрын

Ya it is very possible that was the scenario. thanks for watching B. Santos

@corydunaway 2 жыл бұрын

Probably used in a murder and tossed. Police can only run the serial to see if it was reported stolen

@wes11bravo 2 жыл бұрын

I don't see what's so unusual. That's what happened/will happen to all of mine.

@johnhughes9978 2 жыл бұрын

Mine too.

@christianmontgomery6463 2 жыл бұрын

One shot fired out of six seems to me like they only needed the one shot and then ditched the gun

@canjo4588 Жыл бұрын

Looks like a legit find unlike most vids out there where the screws look new and come out like butter .

@TheKinzlerBros Жыл бұрын

This was found in our Hometown lake, Thank you very much and thanks for watching

@chuckle5253 2 жыл бұрын

I really appreciate that you're restoring something actually in need of restoration, instead of something that was buried in your backyard for a few months like I suspect many other restoration videos. That alone earned my subscription.

@TheKinzlerBros 2 жыл бұрын

Ya there are a lot of fake restorations, thanks for the support

@xzqzq 3 жыл бұрын

I would have assumed those rounds were still live, and acted accordingly.

@TheKinzlerBros 3 жыл бұрын

Well how would you have gotten them out? Please not cylinder is stuck completely. Hammer is stuck as well

@shrimptmagic8793 3 жыл бұрын

Nah gunpowders fine it just like pulling out a tooth

@evilcowboy 3 жыл бұрын

They did the best they could given the circumstance. They were stuck in there and there is no feasible way to get them out aside from that way. It's not like a muzzle loader where you can remove a nipple and dump the powder out. There was literally no other option.

@dylancooper3218 3 жыл бұрын

Just hit em with a hammer it'll be fine

@mahbriggs 3 жыл бұрын

@@TheKinzlerBros if you soaked the gun in WD-40, kerosine, diesel fuel, or other light petroleum product, which I believe you did, that will deactivate the primer! That will make the cartridges safe to drive out!

@johnwhitley2898 3 жыл бұрын

Great resto job! You learn as you go. Good stuff!!

@TheKinzlerBros 3 жыл бұрын

Thanks John, ya for sure. trial and error. have a great weekend

@eebadguy1564 2 жыл бұрын

It's beautiful. I love revolvers like the Colt Peacemaker and this inspires me.

@TheKinzlerBros 2 жыл бұрын

Thank you very much we appreciate it and it brings us joy to inspire others, thanks for watching

@jpb1231000 3 жыл бұрын

As long as the Transfer bar is functional, you can load six full house MAGNUM loads in that thing!!! Ruger's ROCK!!! I have a GP 100, AR556, Mini 14, and an LC9S... All Rugers... All well BUILT!!!

@TheKinzlerBros 3 жыл бұрын

It doesn't have a transfer bar its a 1969 old model 3 screw blackhawk. ya rugers are great, sounds like you have a good collection going. thanks for watching

@jpb1231000 3 жыл бұрын

@@TheKinzlerBros damn... i noticed the 3 screws... I thought they had transfer bars too!!! As much as I LOVE RUGER... I don't have a 10/22... I DO have 3 Marlin 60's and a 70 Papoose in 22 LR!!!

@jpb1231000 3 жыл бұрын

@@TheKinzlerBros Yep... It was 73 when they did the safe thang!!! I didn't realize that!!!

@oslogrigor8320 2 жыл бұрын

I hope you get the tools and knowledge you need to do this all properly. Restoration is definitely an art, and it's good to see you gaining experience and listening to wiser men in the comments section here.

@TheKinzlerBros 2 жыл бұрын

Oh agreed completely I want to get good at this I want to do it right and I want to make really nice restoration videos if people know more things about it than me I want to learn I am a rookie I acknowledge that and I wanna learn so I’m doing more research listening to people that know more than me and I am getting better thank you very much for the nice comment

@martinmarsola6477 3 жыл бұрын

Damn Brandon, you did a bang up job on this revolver. You definitely have a talent for this procedure. I’d keep this video for future screenings. Excellent presentation. Congratulations! 😉👍🇺🇸

@TheKinzlerBros 3 жыл бұрын

well thank you very much for the compliment

@francisbennett5965 2 ай бұрын

Nice job fellas.

@TheKinzlerBros 2 ай бұрын

Thank you, thanks for watching!

@francisbennett5965 2 ай бұрын

@TheKinzlerBros your videos are awesome. I like 1800s cowboy guns but all the guns you do are great.

@jerrylowden1977 2 жыл бұрын

Yup a person that makes a great video of a gun u got back. God Bless you

@TheKinzlerBros 2 жыл бұрын

Thank you very much, thanks for watching

@BlueMountainBandit 2 жыл бұрын

That's a seriously good find! I would absolutely love to own one of those

@TheKinzlerBros 2 жыл бұрын

Ya it is an awesome revolver, we are so happy how it turned out, hope you find one someday. thanks for watching

@Jo_Wardy 2 жыл бұрын

Great restoration. Big fan of western style revolvers. Loved the Clint Eastwood spaghetti westerns. Would love to own my own western style revolver but where I live we can't own a pistol.

@TheKinzlerBros 2 жыл бұрын

Thank you very much for watching and for commenting

@garyhotchkiss4207 2 жыл бұрын

Just COOL all the way around. Love how you shot this. You guys are great

@TheKinzlerBros 2 жыл бұрын

Wow Gary thank you so much for the nice comment we did do a comparison test between 38 special and 357 magnum in a separate video we also just finished our 1917 shotgun restoration video out real soon

@troyrosenbaugh9935 Жыл бұрын

24 hors in evaporust, amazing transformation. Before pulling it apart them put it all back when apart. Great vid!!!

@TheKinzlerBros Жыл бұрын

Yes! Thank you!

@harrisonmantooth3647 3 жыл бұрын

Brandon & Austin, congratulations on a great find. You fellas did an awesome job restoring that Old Model Ruger. Unless the owner sent that handgun back to Ruger for the upgrade, all Three Screw models came from the factory minus a "Transfer Bar". Three screws, three clicks when the hammer is pulled back. Two screws, two clicks. I have five Rugers, three of which are Old Models that I bought back in the mid 1960's. Ruger firearms have always been dependable and, their Customer Service is outstanding in my personal opinion. May I offer a suggestion? Any of the good firearm supply stores out there, Brownells, MidSouth, Midway USA, offer great tools made for maintaining firearms. A good set of Hollow ground screwdrivers and a set of pin punches will help assure that you don't "bugger" any screw heads. I learned the hard way after messing up the slots on one of my first firearms. Again, congratulations on a great find, I'm envious. The .357 mag is one caliber I don't own. You did a great job, that Old Three Screw will be treasured for many years to come. Stan

@TheKinzlerBros 3 жыл бұрын

Thanks so much and yea I agree with the screws. I am buying to me for our next restorations project. Yea people keep saying you can load six then i tell them it does not have a transfer bar. Thanks for the really nice Comment

@heleti0000 3 жыл бұрын

Great restoration - always so satisfying to bring something “back to life” rather than just buy a new one 👍

@TheKinzlerBros 3 жыл бұрын

thank you very much Beskar

@tgfoley1493 2 жыл бұрын

Good job guys👍

@TheKinzlerBros 2 жыл бұрын

Well thank you very much TG Foley. We really appreciate you watching and we comment back to everyone that drops a comment

@cummings37128 2 жыл бұрын

Way to go young man! Those "old" models are my favorite.

@TheKinzlerBros 2 жыл бұрын

Thanks Moto, we appreciate it, thanks for watching

@andrear629 3 жыл бұрын

This is amazing! Bravo!✌😊🇮🇹

@TheKinzlerBros 3 жыл бұрын

Wow thank you so much for watching

@dylanbedard5853 2 жыл бұрын

I’m happy that a classic like this that had been neglected for so long can actually fire again. I love single action revolvers, especially Ruger being one of my favorite brands. I got a New Vaquero in .45 LC and I would love to have a Blackhawk 357 Magnum/9mm Convertible at some point. This Blackhawk is back in action and that’s a blessing right there. By the way, being the 3-screw model, they don’t have the transfer bar safety like the 1973 and newer ones do. Another trick to loading it, like I do with my Heritage Rough Rider is load one, skip the second chamber and load the remaining 4, that way the hammer rests on an empty chamber.

@TheKinzlerBros 2 жыл бұрын

Thank you very much for the awesome comment and all the cool knowledge that you gave to me thanks for watching

@wayneandrus240 Жыл бұрын

Another very beautiful and careful restoration. What a gift that gun would make!!!

@TheKinzlerBros Жыл бұрын

Thank you very much, we appreciate you, thanks for watching

@bryaningalls6618 Жыл бұрын

Very cool restoration. My grandfather left me this same gun and the .22 caliber. Very fun to watch

@TheKinzlerBros Жыл бұрын

Thank you, ya they are very cool guns. Thanks for watching

@tristanbarnett6271 3 жыл бұрын

Very impressive job my friends I remember seeing that magnet fishing video a while back of you guys finding that gun and always wondered if you were ever going to get it back but you all did an awesome job cleaning and restoring it and if I were you I would leave the original grips on there Just for kicks now all you need is a quick draw holster for it

@TheKinzlerBros 3 жыл бұрын

thanks so much for watching

@bradwieties7968 2 жыл бұрын

You can load all six safely it being a single action and using a transfer bar makes it drop safe

@TheKinzlerBros 2 жыл бұрын

Yep all true statements this gun does not have a transfer bar yet thanks for watching

@laurogarza4953 2 жыл бұрын

Old model Rugers, like this one, have an action that is NOT safe for 6 rounds in the cylinder. Only new models are safe as you describe.

@Chiller1967 2 жыл бұрын

As someone said this is a three screw Ruger (see the 3 screw in the grip frame) which means it is pre- transfer bar so not safe to carry with round under the hammer unless you have it modified.

@pharmdiddy5120 2 жыл бұрын

Check and see if it's possible to index the trigger between two the rounds in other words manually cycle the cylinder to halfway between two rounds and (very very carefully) drop the hammer controlling it with your thumb. That should keep the hammer in a safe position to carry six. Now if it won't stay there then I'm wrong and don't listen to me! Edit: Should go without saying but now that I think about it - try this empty or with dummy rounds or snap caps first!

@bradwieties7968 2 жыл бұрын

@@TheKinzlerBros does it have a hammer mounted firing pin? If not transfer bar is being used

@leviwoodring6101 4 ай бұрын

Nice find. Looks like it wasn't in the water to long.

@TheKinzlerBros 4 ай бұрын

Thanks, ya mabe a couple years. Thanks for watching!

@rwilko9525 3 жыл бұрын

You guys deserve to be happy on the resto this is a awesome channel.

@TheKinzlerBros 3 жыл бұрын

Thanks R Wilkinson we really appreciate it and we are thrilled about it, thanks for watching

@mindigd 3 жыл бұрын

Loved this video and seeing you get to shoot the Ruger! I wasn't sure that I'd like the two-tone metal, but I really love it. Looking forward to your next restoration video!

@TheKinzlerBros 3 жыл бұрын

thank you Mindi i knew you would comment you always do, thanks Mindi

@filianablanxart8305 2 жыл бұрын

For a while the Two Tone look was popular enough that guys would do that on purpose .

@p.k.carlson6646 3 жыл бұрын

Nice job cleaning up the gun, brothers! Another one for your collection.

@TheKinzlerBros 3 жыл бұрын

thats right P.K. thanks for watching

@MrWayneploof 2 жыл бұрын

I love doing restoration on old guns. the first one i did come out about like this one the more you do the better you will get. nice work

@TheKinzlerBros 2 жыл бұрын

That’s exactly how I see it of course I’m an amateur at doing it I’m getting better as I go make a mistakes but that’s when you learn and you also learn from the tips that people give you along the way and it helps a lot I appreciate you watching

@viktoria_nik8821 2 жыл бұрын

kzfaq.info/get/bejne/eMiKhbal2ODbdIU.html

@daleyhanson5889 6 ай бұрын

" Are You Talking To Me,,,? Great job,,

@TheKinzlerBros 6 ай бұрын

I suppose, thanks we appreciate it!

@paulm417 2 жыл бұрын

The single six actually does have a transfer bar safety, otherwise you would see the firing pin as an integral part of the hammer. It's perfectly safe to load 6 rounds.

@jaseun1 2 жыл бұрын

Transfer bar safeties were not included on the earlier single action pistols. Ruger has a program where you can send an original one to them and they will upgrade to a transfer bar safety system for free. They will also send you the original hammer parts back to you.

@JA-ze2yx 2 жыл бұрын

@@jaseun1 And he loaded it wrong so only putting 5 in was pointless. Half cock, load, skip, load x4, cock, drop hammer.

@paulm417 2 жыл бұрын

@@jaseun1 When he cocks it, the hammer is flat. That was just my observation. I've never owned an older model, but I own many inbetween and new ones and the 2 minutes of googling I did said one feature of the single six was the transfer bar safety.. At least he was aware of the 5 round rule at all, I was actually surprised at that alone.

@TheKinzlerBros 2 жыл бұрын

I hope they will do that but when I contacted them about parts for this firearm they didn’t have any and told me they couldn’t help me

@TheKinzlerBros 2 жыл бұрын

Yes I did a load it wrong because it was the first time I have ever loaded a revolver that’s how you learn

@sebastianlaguens5660 2 жыл бұрын

I would've kept the original Grips, just scrape the finish with a knife and then put some oil in them I recommend mark novak's conservation videos

@TheKinzlerBros 2 жыл бұрын

I can agree with you on that I just already had the grips so I just went with them but that’s a good point thank you

@sebastianlaguens5660 2 жыл бұрын

@@TheKinzlerBros the new grips are fine too, it's just that they don't quite Match with the wear on the reciever You still did a good job

@heinrichstyer5388 2 жыл бұрын

Exactly! Mark is awesome.

@sameeralazawee7524 7 ай бұрын

Very good >>> Thanks .

@TheKinzlerBros 7 ай бұрын

Thank you very much!

@bobcontreras5638 2 жыл бұрын

A beautiful revolver. I like the way you restored the hand gun. Thanks for the video.

@TheKinzlerBros 2 жыл бұрын

Yes it is, thank you very much Bob we appreciate it, thanks for watching

@rghall57 3 жыл бұрын

Great job! Im surprised the sheriffs dept. gave it back to you.

@TheKinzlerBros 3 жыл бұрын

Yes I was surprised as well it was awesome

@abnpthfdr2934 3 жыл бұрын

I've watched thousands of magnet fishing, gun restoration, and police videos; I've NEVER seen one where the police gives a gun back. That just blew my mind!!! (I think they keep them for themselves, but that's besides the point) I'm just glad you got yours back.

@MrBottlecapBill 3 жыл бұрын

@@abnpthfdr2934 If it was in good shape someone at the PD would have kept it. :D

@David-cv6ih 3 жыл бұрын

Do not let Mark Novak see this video!

@TheKinzlerBros 3 жыл бұрын

Well i hope he does not disapprove to much, thanks for watching

@tenza7545 2 жыл бұрын

The wire wheel. Was the most cringe that I have experienced please never do that again

@unicornlap 2 жыл бұрын

I was literally thinking the EXACT same thing. I just sat here watching this going omg. Firstly, there's the working on a loaded gun when you CLEARLY aren't experienced enough to do so. Secondly, the absolute DESTRUCTION of the integrity of that firearm. I'm really sad watching this. And to the other individual who claims Mark Novak doesn't know what he's doing. My only response is...🤣🤣🤣. Ok, show us how it's done. Please, by all means. 🤦‍♀️

@carlmarks7448 Жыл бұрын

Just what the world needs: a restored GUN!

@TheKinzlerBros Жыл бұрын

Thanks for watching, It's a revolver not the one's you see on the news

@pinkfloydmasterdude 2 жыл бұрын

Great job

@TheKinzlerBros 2 жыл бұрын

Thank you very much

@danlewis6157 3 жыл бұрын

Cowboy loading for non-transfer-bar single-actions: load one, skip one, load four. When you lower the hammer, it will be over the empty cylinder space.

@TheKinzlerBros 3 жыл бұрын

awesome tip thank you for watching as well Dan

@nastybastardatlive 3 жыл бұрын

Yeah, we watch hickock 45 too.

@joycehook4832 3 жыл бұрын

That's so cool the PD gave it back to you. The way people treat gun owners now days they could of easily said they needed to destroy it to keep on good terms with that public. Nice gun...nicer fixed up 🙂

@TheKinzlerBros 3 жыл бұрын

thank you for watching! it was great to get it back from the police

@michaeljones9255 3 жыл бұрын

Who throws a firearm into the drink? Only one good answer, a criminal trying to hide a weapon used in the commission of a crime. Evidentially the police couldn't tie it to a local crime, and no ballistic test could've been conducted by a forensic lab because they couldn't do a test firing. All they did was run the number and it came back clean.

@nooneofconsequence884 3 жыл бұрын

@@michaeljones9255 someone might have dropped it off their boat and the current brought it close to the dock. But who knows im just speculating

@zuestoots5176 3 жыл бұрын

Most gun owners deserve the criticism. They think because they have a gun they can do anything they want.

@nooneofconsequence884 3 жыл бұрын

@@zuestoots5176 Most? Nahh most of us are common sense people but are there a few knuckleheads sure

@shbooble-macna7876 2 жыл бұрын

This channel will be huge one day.

@TheKinzlerBros 2 жыл бұрын

Wow that is a really nice thing for you to say bolt gaming we really appreciate that and we have big plans for a lot more restorations and two still magnet fish hope to see your comment in the future because we coming back to everybody thanks for watching

@shbooble-macna7876 2 жыл бұрын

@@TheKinzlerBros anytime.

@TheKinzlerBros 2 жыл бұрын

We are aiming high as well for the for the channel and we have big plans coming up I’m gonna be fishing this weekend but we have some really good restorations that nobody knows about yet except for just the Kinzler Bros

@adrianterry3798 Жыл бұрын

Dude u don't know how great full I am of your video I just restored one and polished it out and was having a hard time reassembling it. Your video helped me out so damn much THANK YOU!

@TheKinzlerBros Жыл бұрын

Happy to help and thank you very much I appreciate the support and thank you for watching

@adrianterry3798 Жыл бұрын

@@TheKinzlerBros went ahead and subscribed to yall..you do interesting work.

@terrysmith4465 3 жыл бұрын

Had that Gun been in pristine condition you would have never got it back from the sheriff some deputy would had it at home in his collection

@bombtwenty3867 3 жыл бұрын

LOL Police are the same the whole world over

@TheKinzlerBros 3 жыл бұрын

i agree with that terry

@americanpatriot9865 3 жыл бұрын

In NJ they would have NEVER given you back that gun.

@TheRealSwampOperator2 3 жыл бұрын

True story. I work for a public works dept. Ive foubd 4 firearms. First 2 I turned in. Never seen em again. The next two I reatored after having a Leo friend run the numbers

@frigglebiscuit7484 3 жыл бұрын

can confirm. guy stole my dads ruger gp100, and he turned himself in. gun was put in evidence....and went missing.

@Moytens Жыл бұрын

I was surprised by the sound of the shots, is it just me or isn't it very loud? 🙃 Great job guys 🙌

@TheKinzlerBros Жыл бұрын

Ya we only had .38's at the time that is why it was so quiet, thanks for watching

@ronaldcrafton5995 Жыл бұрын

@@TheKinzlerBros Those cartridges looked to be too short to be 38's. I was thinking WTH are you loading in that gun. They looked to be 38 S&W rounds.

@aaronbecerril230 Жыл бұрын

I love this revolver!! amazing work guys!

@TheKinzlerBros Жыл бұрын

Me too, thank you very much!

@jaszvjoroh2077 3 жыл бұрын

Awesome restoration video !! I love and enjoyed so much 💕. Not just restoration but test fire!! Oh my god this is good video. Thanks for making such a good video like this for us.

@TheKinzlerBros 3 жыл бұрын

Glad you enjoyed it

@MADMAX839 3 жыл бұрын

“.....here at our small little range.....” behind him the camera sees that to his back is literally in the middle of nowhere as far as the eyes can see.

@TheKinzlerBros 3 жыл бұрын

yes well it is a make shift range which is not a legitimate range since people totally ruined the one we did have by shooting everything and vandalizing it and not respecting it they took it away from the whole public, of course the actions of the few irresponsible ruin it for everyone else. so it sucks. thanks for watching

@timsmithoutdoors 2 ай бұрын

That’s a cool old Blackhawk! Especially with it being a three screw. Nice work here!!

@TheKinzlerBros 2 ай бұрын

Thank you very much, we appreciate it! Thanks for watching!

@user-fu5gn9gg3h 2 жыл бұрын

Fine job

@TheKinzlerBros 2 жыл бұрын

Thank you for watching

@jimc7022 3 жыл бұрын

Great episode of ‘This Ol Murder Weapon’ 😁

@TheKinzlerBros 3 жыл бұрын

thank you so much Jim, i hope to see your comments again on the channel

@Pleumel 3 жыл бұрын

"It's not very corrosive to the metal" "The gripframe has lost it's integrity and is now missing" Hahahaa

@scottkane717 3 жыл бұрын

It’s cast to be expected

@chrisgabbert658 3 жыл бұрын

I’ve seen cleaners like that , not aggressive or corrosive but don’t leave it on very long it eats some metals it’s just a soap.

@TheKinzlerBros 3 жыл бұрын

Ya that metal was cheap on the grip frame. we left it in just a little to long

@Pleumel 3 жыл бұрын

The Kinzler Bros Be aware, that these materials, even if they stay together after the bath in that substance, can loose a substantial amount of stability. That could be extremely dangerous in this situation. Imagine the frame breaking in your hand when you shoot. That stuff gets brittle super fast. Stay safe ✌🏻have a good one.

@Pleumel 3 жыл бұрын

The Kinzler Bros Oh and if it’s cast Material, the pores of the material are big. So the chemicals COULD sit in the pores after cleaning and slowly attack the material even further! It may look stable first but could get more brittle after a while. ✌🏻

@marcusfenix891 7 ай бұрын

Big shout out to you guys from London England love the vids great work much respect

@TheKinzlerBros 7 ай бұрын

Thanks Marcus we appreciate it!

@edmorris7100 2 жыл бұрын

Great job on restoring that good old Ruger.

@TheKinzlerBros 2 жыл бұрын

Thank you very much we appreciate it. thanks for watching

@bandcshow11d6 3 жыл бұрын

Idk if anyone else commented this but that’s a Ruger it has a transfer bar. You can load all 6 and hit the hammer with a hammer and it won’t fire. The old style of .45 has a firing pin on the hammer so you would only load 5. Fill it to the brim boys

@TheKinzlerBros 3 жыл бұрын

Its a old model so it doesn't have a transfer bar, thanks for watching

@lambastepirate 3 жыл бұрын

@@TheKinzlerBros That rule of 5 in the chambers is for when you carry it around, it is normal to load 6 while at the range. The one in my night stand is loaded to 6 also as it will only be used in an emergency.

@MichaelPoage666 3 жыл бұрын

@@lambastepirate Not to mention, they didn't load them in the right sequence to get the empty chamber under the hammer when they started shooting. Bam! Bam! Bam! CLICK Bam! Lol, that serves no purpose whatsoever. Cool video anyway.

@lambastepirate 3 жыл бұрын

@@MichaelPoage666 Yea I noticed it but plenty others did and they had told him how it should be done so I didn't bother with it.

@johncashwell1024 2 жыл бұрын

This cat needs to watch Anvil! Never wire wheel a firearm!

@TheKinzlerBros 2 жыл бұрын

Ya we have made mistakes but, its part of learning. thanks for watching

@macoppy6571 2 жыл бұрын

Anvil is on the Mark Novak channel, here on YT. Keep up the good work 👍

@johncashwell1024 2 жыл бұрын

@@TheKinzlerBros That is so very true! I have definitely made a few, well...several, myself. As you said, its all part of the process of learning. I attempted to install the paddle/anit-rattle mag release on my HK-91 and have done a horrific job of it. Now it needs a competent gunsmith to fix my mistake.

@charlieave2315 8 ай бұрын

This is so cool

@TheKinzlerBros 8 ай бұрын

Thanks, ya it was an awesome find! Thanks for watching

@mmmchannel5136 Жыл бұрын

Nice nice 👌

@TheKinzlerBros Жыл бұрын

Thank you!

@carlosmontanez1173 3 жыл бұрын

Check to see if there are slight dimples or indentations on the cylinder between each chamber Some single actions have them where you can rest the hammer between chambers by gently pulling back the hammer slightly enough to turn, setting it in that in-between spot then very carefully sitting the hammer there. It acts as a "safety" of sorts so hammer wont be resting on an empty chamber

@TheKinzlerBros 3 жыл бұрын

Very interesting thanks for the info and for watching

@johnhipp8267 2 жыл бұрын

That's one of the dumbest things I've ever heard.

@Ginrummy33 3 жыл бұрын

If you're gonna shoot it immediately after loading, there is no point in leaving an empty carry-safe chamber. Good job on the resto. I love my old model Single six .22 lr/mag.

@TheKinzlerBros 3 жыл бұрын

Ya that is a good point, thanks. that's awesome. thanks for watching

@murphy4yt 2 жыл бұрын

However, if you’re going to load five, load one, skip one, load four and bring the hammer to full cock. Then when you lower the hammer, it will be on an empty chamber. Nice restoration, by the way.

@tomdooley3522 2 жыл бұрын

Beautiful work , beautiful gun.

@TheKinzlerBros 2 жыл бұрын

Wow thank you

@aurteekay6339 28 күн бұрын

Definitely a gun worth restoring. I 100 percent would’ve tried to do the same. Ruger makes great revolvers. The ruger old army was one of the greatest and strongest revolvers of the 18th century. It could just take abuse like a champ. So honestly if any revolver could be restored I’d think a ruger would be a good one to try to restore. They also sell parts and spare cylinders for them so as long as you can get the frame back in good shape you’re good to go. How was the rifling ?

@TheKinzlerBros 27 күн бұрын

Absolutely worth it. Ya they are great guns! The rifling is still good, thanks for watching!

@pyro323 3 жыл бұрын

EvapORust works really good for safely cleaning metal and getting rid of that pesky rust. That way you won't damage the metal with a wire wheel. Other than that it was a great video fellas! 👍 🇺🇲

@TheKinzlerBros 3 жыл бұрын

Thanks for the tips, we have used evaporust in the past we just didn't on this one. thanks for watching

@pyro323 3 жыл бұрын

@@TheKinzlerBros A lot of firearm restoration videos fail to show their audience a test fire after the restoration, so good on u guys for showing us a test fire!

@scottnix4991 3 жыл бұрын

Very interesting video. You are correct that it's not safe to carry six rounds in this 3 screw old model. Many were upgraded to add a transfer bar safety after a lawsuit against Ruger but this one has not been modified. The dead giveaway is the flat face of the hammer. The modified one is notched. Ruger will upgrade it for free I you are so inclined. They might even tune it up for you while they're at it. Great video. Liked and subscribed.

@TheKinzlerBros 3 жыл бұрын

wow thanks so much Scott for the info and for supporting us

@marleymatthews7633 3 жыл бұрын

How old do you reckon the gun is bud

@marleymatthews7633 3 жыл бұрын

Found the serial number 1972

@stevestarr5968 3 жыл бұрын

Don't do the so called free transfer safety bar upgrade, it'll greatly diminish the value of the gun something that RUGER doesn't bother too mention.

@LAT-qk3vj 3 жыл бұрын

@@stevestarr5968 That is some good information. Actually there is a lot of really good info. in these comments.