Just the fact you're taking time out of your day to show others is A CLASS..... cheers from the City of Angels!!

I did gutters a long time ago, but I had forgot how to do mitres, make tabs, etc. So I watched this to see the one piece artistry. I think I'll stick to 2 piece for my first gutter in 30 years, lol. What I had forgot about, and you reminded me, is PAINT! I remember that we had found some paint that matched perfectly, and it really cleaned up the corners a lot. I liked the video a lot. Thanks for posting.

Craftsmanship is undefeated. Great work man! I came looking for some info about lineset covers and left with a new respect for good gutters

I've pulled a few old gutters of lately in australia where they've done there outside mitres like you. Pretty cool method. I like just doing the cuts seperately especially with long lengths with an inside mitre on the other edge. Interesting thanks for sharing.

Well done, sir. My hats off to you!

Nice work! Thanks for sharing.

Great job! You da man.

You got working man hands like mine and when someone tells you, you can't do it... You do it aaand make a video to prove it. Nicely done!. I have done the exact same thing with some gutter , cornice, coping,thru wall,base flashings and some other flashings too just to prove it could be done. Keep the good work up man

Thank for sharing!! Looks great!!

Best tutorial I have seen good job

Awesome craftsmanship

Good craftsmanship brotha! One question tho, on OG gutter you always have to hit the design to make it look somewhat the same then touch it up with paint or is there a way to make it look perfectly the same piece of gutter like you can do with flat face fascia gutter..

a roofing co did my neighbors gutters did it so clean I can't figure out how they did it. no visible seam and no screws. wish I could upload a picture. it's got me baffled.

It would have been nice if you explained how the measurements go for your pattern. And how you were putting your pattern down to your measurement

Awesome! I would love to learn from you how to do regular inside and outside hand cut miters!

Good my friend

Say what? Score and snap and no seam. Karl is not a gutter man, He's a magician doing crazy magic stuff. You Rock Magic Man, thanks for sharing high skill fun.

I don't know man. I like you cause your hands look like they gone thru a wood chipper a few times and that's pure greatness in my mind. Otherwise I just don't know about this corner work : (. Please do another version where there's now paint and or outside screws available and ping me when its done.

This quality of gutter work deserves Pop rivets and gutter seal.

Thank you sir for sharing your craftsmanship.

I do seamless gutter all the time and it much easier and faster just to make it out of 2 peices and looks better also the screws you put in the frount will just rust and leak

Got to impress the boss tomorrow, this is my extra credit tonight! Looks great.

It's cool, but the box miter is quicker, pre caulk the miter zip it on caulk seams and dab the screws wherever you choose to put them. Way quicker. But this would helpful for this pesky baby miters that strip miter sometimes dont cover good

Thank you for your great skill

Very impressive I know the ex corner units are disproportionately expensive. That system is just as tidy as the shop bought option.

Never use clear silicon on gutters. Let’s light through. And the screws make this look messy. I would reject this mitre

This is absolutely beautiful

What kind of 3/8 crew you using. One is the a hexagon bit?

If and when I install lead lock screen, I use a similar technique for when I cut the miters, other than that, wouldn’t use a solid section to do gutters going around a miter! Great demo though bossman!!

My respect amigo you show a perfectly cut thx

Little bit more time and effort but the looks are worth it

Karl can you explain how you go about your template for outside miter?I have several 22.5 outside and inside angles I need to cut and not sure what’s best..your template goes into a point on the backside...thanks..

I do a 2 piece mitre currently but would love to learn this method! Any chance you'd share your pattern with us? Also, can you do inside mitres with this method? Thanks for this wizardry! I'm blown away and greatly Impressed!!!

That right respect, work physically

Screws make it look bad bro you got to use pop rivets to make it look pro

👌 that would make more sense i have done that with inside miters to prove a point also

I don’t know who all you guys are giving this guy credit he just took an hour to make a miter. I live in New Jersey America over here. We got jobs to do money to make Buy box outside strips and be done with it dude

Nah screw-in the whole mitre all the way up is crazy look a lot cleaner without

THE JIG IS THE ANSWER I NEED

I’m stuck on making the outside and inside 22.5 meters.I have a mitresaw if it’s easier that way..I get mixed up on which side to leave the tabs on?

Thank you for this post. I need to make a template, any suggestions?

It does help , for other projects too

You da man!! Can do it in his sleep!

Your red and green snips are too dull that's why the edges are rolling and look jagged. Other than that this is a great method to cut miters I never did them in one piece but I like the way they look. I'm just so used to cutting them in two pieces I'm fast like that but if I could learn how to do it this way and get fast I would rather do it cuz yours look a lot better in one piece. And it's easier to seal the miter with silicone while it's on the ground instead of doing it from a ladder especially on a two-story house

Whoa!

You may as well use a strip mitre because your corner is sloppy and you have 3 screws on the seam of the corner

I am looking to repair the gutter around the bay window. Can this apply

nice

Primo work Karl! Many thanks for the demo.

i like using a black marker on black surfaces too. represent.

Great job but just to keep 3/4 of a inch attached is a lot of extra work for little if any benefits

looks pretty good but takes way too long in my opinion if you had a house with more than 10 miters youd be there all day. I appreciate the craftsmanship but theres many faster and easier ways

i admire your strategy, though it's totally unnecessary. i've done over 5000 houses in my career and it's much easier and faster to make it out of 2 pieces. also, what are those screws you use? looks like an eye sore. you make two pieces and leave a little extra to seam around the corner, not "use a little paint around here".

What the difference between the green and reds?

Really hard to get the gutter up under the drip edge with them kind of hangers

Are y’all located in Georgia?

Must be a warm part of the country! Silicone no good in cold weather! Awesome work tho!

Man, when you don’t wanna have to worry about getting paid Friday and make some good money, come over to DRG. We don’t drink on the job tho, that’s a no go.

lots of skill here but its so painfully slow for something i cant charge extra for.

I was on board until he pulled out the zip screws.

Does anyone can send me the pattern of outside and inside corners?

My boss will Send me home 🏡 but I respect everyone’s Idea for work 💯

Its all fun and games until you put a miter screw through your finger

Do you shave your hands? They look smooth

Way too time consuming. Either use a strip miter or tab it with two separate pieces. Also having to use paint is no bueno.

Wouldn't it be a whole lot easier just to use strip miters?

thanks for the video, but can you redo this with a different color metal? nobody can see what you are drawing

Take a another beer bro!@!

Is not too bad better than boxes.took too long .why not to use the squaare just 28°degrees is faster i what i do.

A little more sealant next time my brother

👍🇫🇮🇫🇮👷‍♂️

Really well explained on the corners

🤠👍👍👍👍👍👍👍👍👍👍👍🍺

I had a laugh at 9:57 "kill it with the sealant" Well done overall! Thank you

Wow i 2nd that takes way too long and as little as i pay for a miter this is a giant waste of time but ive done it when ive ran out of miters

anyone from the jersey area?

Needs some offsets

Looks trrrible with screws. Use rivets

Beer on u hand really professional

Omg I cant believe how terrible this is! I could never do that to a customer or anyone what a hack!! Pre made corners all the way they last forever

I’ll stick to strip miters

How to make the template ?

ND MAKE THE BOTTON IN 45 DEGR

thats fine and dandy lets see ya do one thats 40 feet on both sides of 90 bend , ya aint throwing it around like that

Never spot paint especially with Senox paint

I new a guy as a kid that didn't have to use caulk on them he was anal bout that

Im not sure why but i want to hire you as long as you promised not to do a one piece miter ever again.

It won't let me put pics on here

Cmon now, looks like Garbage, that is not how you do an outside corner

Ive spent a day and a half trying to do this....no 90 degrees no 45 degrees the roof has stupid angles and you go too fast! Plus your camera guy needs to go.

Verdaderamente son de terror🤢

Looks like your just trying to get nothing done..

Perfection imgur.com/gallery/ALUFLKi

Mr. J. knows how to do this work. However he does an extremely poor job of showing how to do this.

Make more sense to get already made corners. Looks like shit. Could have hung 10 corners why he still works on 1 haha

Im a roofing installer and i think its not a good job..i score u 5/10

Way to slow that’s why I use box miters way way way quicker

I will go out of business if I do a job like this

Next time could you use more caulk? .......that wasn’t enough!

Worst mitre ever..lol